- Ruhr-Universität Bochum
Scientific output
Publications
Below, you can either scroll through the complete list of our annually published research in peer-reviewed journals or search for a specific author or keyword via the free text search.
- 2023 • 102
Applying the Effective Bond Energy Formalism (EBEF) to Describe the Sigma (σ) Phase in the Co-Cr-Ni-Re System
dos Santos, J. C. P. and Griesemer, S. and Dupin, N. and Kattner, U. R. and Liu, C. and Ivanova, D. and Hammerschmidt, T. and Fries, S. G. and Wolverton, C. and Campbell, C. E.
JOURNAL OF PHASE EQUILIBRIA AND DIFFUSION. Volume: (2023) - 2023 • 101
Cyclic deformation behavior of an equiatomic CrFeNi multi-principal element alloy
Sisodia, S. and Rajkowski, M. and Laplanche, G. and Chauhan, A.
INTERNATIONAL JOURNAL OF FATIGUE. Volume: 174 (2023) - 2023 • 100
Hardening effect of diffusible hydrogen on BCC Fe-based model alloys by in situ backside hydrogen charging
Rao, J. and Lee, S. and Dehm, G. and Duarte, M. J.
MATERIALS AND DESIGN. Volume: 232 (2023) - 2023 • 99
A new approach to the powder metallurgical production of high nitrogen steels by integrated diffusion alloying in a hot isostatic press
Becker, L. and Radtke, F. and Lentz, J. and Herzog, S. and Broeckmann, C. and Weber, S.
MATERIALS LETTERS. Volume: 352 (2023) - 2023 • 98
Site occupancies in a chemically complex σ-phase from the high-entropy Cr–Mn–Fe–Co–Ni system
Joubert, J. and Kalchev, Y. and Fantin, A. and Crivello, J. and Zehl, R. and Elkaim, E. and Laplanche, G.
ACTA MATERIALIA. Volume: 259 (2023) - 2023 • 97
Cooperative deformation mechanisms in a fatigued CoCrNi multi-principal element alloy: A case of low stacking fault energy
Lu, K. and Chauhan, A. and Litvinov, D. and Schneider, M. and Laplanche, G. and Aktaa, J.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS. Volume: 180 (2023) - 2023 • 96
Effect of grain size on critical twinning stress and work hardening behavior in the equiatomic CrMnFeCoNi high-entropy alloy
Wagner, C. and Laplanche, G.
INTERNATIONAL JOURNAL OF PLASTICITY. Volume: 166 (2023) - 2023 • 95
Increasing the friction stress decreases the size dependence of strength in a family of face-centered cubic high- and medium-entropy alloy micropillars
Pfetzing-Micklich, J. and Fox, F. and Thome, P. and George, E.P. and Eggeler, G.
MATERIALS SCIENCE AND ENGINEERING: A. Volume: 885 (2023) - 2022 • 94
Influence of a Partial Substitution of Co by Fe on the Phase Stability and Fatigue Behavior of a CoCrWC Hard Alloy at Room Temperature
Brackmann, L. and Schuppener, J. and Röttger, A. and Weber, S.
METALLURGICAL AND MATERIALS TRANSACTIONS A: PHYSICAL METALLURGY AND MATERIALS SCIENCE. Volume: 53 (2022) - 2022 • 93
Exploring stability of a nanoscale complex solid solution thin film by in situ heating transmission electron microscopy
Manjón, A.G. and Zhang, S. and Völker, B. and Meischein, M. and Ludwig, Al. and Scheu, C.
MRS BULLETIN. Volume: (2022) - 2022 • 92
In-Flight Measurements of Particle Temperature and Velocity with a High-Speed IR Camera During Cold Gas Spraying of In718 and TiAlCrNb
Fiebig, J. and Gagnon, J.-P. and Mauer, G. and Bakan, E. and Vaßen, R.
JOURNAL OF THERMAL SPRAY TECHNOLOGY. Volume: 31 (2022) - 2022 • 91
Combinatorial sputter deposition of CrMnFeCoNi high entropy alloy thin films on agitated particles
Lourens, F. and Ludwig, Al.
SURFACE AND COATINGS TECHNOLOGY. Volume: 449 (2022) - 2022 • 90
Influence of machining on the surface integrity of high- and medium-entropy alloys
Richter, T. and Schroepfer, D. and Rhode, M. and Boerner, A. and Neumann, R.S. and Schneider, M. and Laplanche, G.
MATERIALS CHEMISTRY AND PHYSICS. Volume: 275 (2022) - 2022 • 89
Elevated-temperature cyclic deformation mechanisms of CoCrNi in comparison to CoCrFeMnNi
Lu, K. and Knöpfle, F. and Chauhan, A. and Litvinov, D. and Schneider, M. and Laplanche, G. and Aktaa, J.
SCRIPTA MATERIALIA. Volume: 220 (2022) - 2022 • 88
Effects of Cr/Ni ratio on physical properties of Cr-Mn-Fe-Co-Ni high-entropy alloys
Wagner, C. and Ferrari, A. and Schreuer, J. and Couzinié, J.-P. and Ikeda, Y. and Körmann, F. and Eggeler, G. and George, E.P. and Laplanche, G.
ACTA MATERIALIA. Volume: 227 (2022) - 2022 • 87
Inner relaxations in equiatomic single-phase high-entropy cantor alloy
Smekhova, A. and Kuzmin, A. and Siemensmeyer, K. and Abrudan, R. and Reinholz, U. and Buzanich, A.G. and Schneider, M. and Laplanche, G. and Yusenko, K.V.
JOURNAL OF ALLOYS AND COMPOUNDS. Volume: 920 (2022) - 2022 • 86
Influence of Mo/Cr ratio on the lamellar microstructure and mechanical properties of as-cast Al0.75CoCrFeNi compositionally complex alloys
Asabre, A. and Gemagami, P. and Parsa, A.B. and Wagner, C. and Kostka, A. and Laplanche, G.
JOURNAL OF ALLOYS AND COMPOUNDS. Volume: 899 (2022) - 2022 • 85
Impact of interstitial elements on the stacking fault energy of an equiatomic CoCrNi medium entropy alloy: theory and experiments
Moravcik, I. and Zelený, M. and Dlouhy, A. and Hadraba, H. and Moravcikova-Gouvea, L. and Papež, P. and Fikar, O. and Dlouhy, I. and Raabe, D. and Li, Z.
SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS. Volume: 23 (2022) - 2021 • 84
Symbiotic crystal-glass alloys via dynamic chemical partitioning
Wu, G. and Liu, C. and Brognara, A. and Ghidelli, M. and Bao, Y. and Liu, S. and Wu, X. and Xia, W. and Zhao, H. and Rao, J. and Ponge, D. and Devulapalli, V. and Lu, W. and Dehm, G. and Raabe, D. and Li, Z.
MATERIALS TODAY. Volume: (2021) - 2021 • 83
In situ nanoindentation during electrochemical hydrogen charging: a comparison between front-side and a novel back-side charging approach
Duarte, M.J. and Fang, X. and Rao, J. and Krieger, W. and Brinckmann, S. and Dehm, G.
JOURNAL OF MATERIALS SCIENCE. Volume: 56 (2021) - 2021 • 82
Density-based grain boundary phase diagrams: Application to Fe-Mn-Cr, Fe-Mn-Ni, Fe-Mn-Co, Fe-Cr-Ni and Fe-Cr-Co alloy systems
Wang, L. and Darvishi Kamachali, R.
ACTA MATERIALIA. Volume: 207 (2021) - 2021 • 81
Welding of high-entropy alloys and compositionally complex alloys—an overview
Rhode, M. and Richter, T. and Schroepfer, D. and Manzoni, A.M. and Schneider, M. and Laplanche, G.
WELDING IN THE WORLD. Volume: (2021) - 2021 • 80
Nucleation and growth of α phase in a metastable β-Titanium Ti-5Al-5Mo-5V-3Cr alloy: Influence from the nano-scale, ordered-orthorhombic O″ phase and α compositional evolution
Antonov, S. and Shi, R. and Li, D. and Kloenne, Z. and Zheng, Y. and Fraser, H.L. and Raabe, D. and Gault, B.
SCRIPTA MATERIALIA. Volume: 194 (2021) - 2021 • 79
Tracer diffusion in the σ phase of the CoCrFeMnNi system
Zhang, J. and Muralikrishna, G.M. and Asabre, A. and Kalchev, Y. and Müller, J. and Butz, B. and Hilke, S. and Rösner, H. and Laplanche, G. and Divinski, S.V. and Wilde, G.
ACTA MATERIALIA. Volume: 203 (2021) - 2021 • 78
Automated assessment of a kinetic database for fcc Co-Cr-Fe-Mn-Ni high entropy alloys
Abrahams, K. and Zomorodpoosh, S. and Khorasgani, A.R. and Roslyakova, I. and Steinbach, I. and Kundin, J.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING. Volume: 29 (2021) - 2021 • 77
Superior low-cycle fatigue properties of CoCrNi compared to CoCrFeMnNi
Lu, K. and Chauhan, A. and Walter, M. and Tirunilai, A.S. and Schneider, M. and Laplanche, G. and Freudenberger, J. and Kauffmann, A. and Heilmaier, M. and Aktaa, J.
SCRIPTA MATERIALIA. Volume: 194 (2021) - 2021 • 76
Tensile creep properties of a CrMnFeCoNi high-entropy alloy
Zhang, M. and George, E.P. and Gibeling, J.C.
SCRIPTA MATERIALIA. Volume: 194 (2021) - 2021 • 75
On the Formation Mechanism of Column Damage Within Modular Taper Junctions
Zachariah, Z. and Balachandran, S. and Liu, Z. and Pourzal, R. and McCarthy, S.M. and Hall, D.J. and Fischer, A. and Raabe, D. and Herbig, M.
JOURNAL OF ARTHROPLASTY. Volume: 36 (2021) - 2021 • 74
Laser metal deposition of Al0.6CoCrFeNi with Ti & C additions using elemental powder blends
Asabre, A. and Wilms, M.B. and Kostka, A. and Gemagami, P. and Weisheit, A. and Laplanche, G.
SURFACE AND COATINGS TECHNOLOGY. Volume: 418 (2021) - 2021 • 73
Structure and hardness of in situ synthesized nano-oxide strengthened CoCrFeNi high entropy alloy thin films
Lee, S. and Chatain, D. and Liebscher, C.H. and Dehm, G.
SCRIPTA MATERIALIA. Volume: 203 (2021) - 2021 • 72
Design of a new wrought CrCoNi-based medium-entropy superalloy C-264 for high-temperature applications
Hunfeld, J. and Sommer, H. and Kiese, J. and Wang, H. and Riyahi khorasgani, A. and Li, T. and Somsen, C. and Kostka, A. and Laplanche, G.
MATERIALS AND DESIGN. Volume: 211 (2021) - 2021 • 71
Plasticity induced by nanoindentation in a CrCoNi medium-entropy alloy studied by accurate electron channeling contrast imaging revealing dislocation-low angle grain boundary interactions
Habiyaremye, F. and Guitton, A. and Schäfer, F. and Scholz, F. and Schneider, M. and Frenzel, J. and Laplanche, G. and Maloufi, N.
MATERIALS SCIENCE AND ENGINEERING A. Volume: 817 (2021) - 2021 • 70
CrMnFeCoNi high entropy alloys with carbon and nitrogen: mechanical properties, wear and corrosion resistance
Chmielak, L. and Mujica Roncery, L. and Niederhofer, P. and Weber, S. and Theisen, W.
SN APPLIED SCIENCES. Volume: 3 (2021) - 2021 • 69
Effect of synthesis temperature on the phase formation of NiTiAlFeCr compositionally complex alloy thin films
Marshal, A. and Singh, P. and Music, D. and Wolff-Goodrich, S. and Evertz, S. and Schökel, A. and Johnson, D.D. and Dehm, G. and Liebscher, C.H. and Schneider, J.M.
JOURNAL OF ALLOYS AND COMPOUNDS. Volume: 854 (2021) - 2021 • 68
Combinatorial exploration of B2/L21 precipitation strengthened AlCrFeNiTi compositionally complex alloys
Wolff-Goodrich, S. and Marshal, A. and Pradeep, K.G. and Dehm, G. and Schneider, J.M. and Liebscher, C.H.
JOURNAL OF ALLOYS AND COMPOUNDS. Volume: 853 (2021) - 2021 • 67
Comparing the Activity of Complex Solid Solution Electrocatalysts Using Inflection Points of Voltammetric Activity Curves as Activity Descriptors
Löffler, T. and Waag, F. and Gökce, B. and Ludwig, Al. and Barcikowski, S. and Schuhmann, W.
ACS CATALYSIS. Volume: 11 (2021) - 2020 • 66
In-situ synthesis via laser metal deposition of a lean Cu–3.4Cr–0.6Nb (at%) conductive alloy hardened by Cr nano-scale precipitates and by Laves phase micro-particles
Kini, A.R. and Maischner, D. and Weisheit, A. and Ponge, D. and Gault, B. and Jägle, E.A. and Raabe, D.
ACTA MATERIALIA. Volume: 197 (2020) - 2020 • 65
Dislocation-induced breakthrough of strength and ductility trade-off in a non-equiatomic high-entropy alloy
Guo, W. and Su, J. and Lu, W. and Liebscher, C.H. and Kirchlechner, C. and Ikeda, Y. and Körmann, F. and Liu, X. and Xue, Y. and Dehm, G.
ACTA MATERIALIA. Volume: 185 (2020) - 2020 • 64
Analysis of strengthening due to grain boundaries and annealing twin boundaries in the CrCoNi medium-entropy alloy
Schneider, M. and George, E.P. and Manescau, T.J. and Záležák, T. and Hunfeld, J. and Dlouhý, A. and Eggeler, G. and Laplanche, G.
INTERNATIONAL JOURNAL OF PLASTICITY. Volume: 124 (2020) - 2020 • 63
Processing of a single-crystalline CrCoNi medium-entropy alloy and evolution of its thermal expansion and elastic stiffness coefficients with temperature
Laplanche, G. and Schneider, M. and Scholz, F. and Frenzel, J. and Eggeler, G. and Schreuer, J.
SCRIPTA MATERIALIA. Volume: 177 (2020) - 2020 • 62
Hydrogen resistance of a 1 GPa strong equiatomic CoCrNi medium entropy alloy
Soundararajan, C.K. and Luo, H. and Raabe, D. and Li, Z.
CORROSION SCIENCE. Volume: 167 (2020) - 2020 • 61
Early stage phase separation of AlCoCr0.75Cu0.5FeNi high-entropy powder at the nanoscale
Peter, N.J. and Duarte, M.J. and Liebscher, C.H. and Srivastava, V.C. and Uhlenwinkel, V. and Jägle, E.A. and Dehm, G.
JOURNAL OF ALLOYS AND COMPOUNDS. Volume: 820 (2020) - 2020 • 60
Sputter deposition of highly active complex solid solution electrocatalysts into an ionic liquid library: Effect of structure and composition on oxygen reduction activity
Manjón, A.G. and Löffler, T. and Meischein, M. and Meyer, H. and Lim, J. and Strotkötter, V. and Schuhmann, W. and Ludwig, Al. and Scheu, C.
NANOSCALE. Volume: 12 (2020) - 2020 • 59
Structure zone investigation of multiple principle element alloy thin films as optimization for nanoindentation measurements
Savan, A. and Allermann, T. and Wang, X. and Grochla, D. and Banko, L. and Kalchev, Y. and Kostka, A. and Pfetzing-Micklich, J. and Ludwig, Al.
MATERIALS. Volume: 13 (2020) - 2020 • 58
Tailoring grain growth and solid solution strengthening of single-phase CrCoNi medium-entropy alloys by solute selection
Hu, G.W. and Zeng, L.C. and Du, H. and Liu, X.W. and Wu, Y. and Gong, P. and Fan, Z.T. and Hu, Q. and George, E.P.
JOURNAL OF MATERIALS SCIENCE AND TECHNOLOGY. Volume: 54 (2020) - 2020 • 57
Microstructure evolution and thermal stability of equiatomic CoCrFeNi films on (0001) α-Al2O3
Addab, Y. and Kini, M.K. and Courtois, B. and Savan, A. and Ludwig, Al. and Bozzolo, N. and Scheu, C. and Dehm, G. and Chatain, D.
ACTA MATERIALIA. Volume: 200 (2020) - 2020 • 56
Short-range order in face-centered cubic VCoNi alloys
Kostiuchenko, T. and Ruban, A.V. and Neugebauer, J. and Shapeev, A. and Körmann, F.
PHYSICAL REVIEW MATERIALS. Volume: 4 (2020) - 2020 • 55
Grain boundary energy effect on grain boundary segregation in an equiatomic high-entropy alloy
Li, L. and Kamachali, R.D. and Li, Z. and Zhang, Z.
PHYSICAL REVIEW MATERIALS. Volume: 4 (2020) - 2020 • 54
Interfacial nanophases stabilize nanotwins in high-entropy alloys
Lu, W. and Liebscher, C.H. and Yan, F. and Fang, X. and Li, L. and Li, J. and Guo, W. and Dehm, G. and Raabe, D. and Li, Z.
ACTA MATERIALIA. Volume: 185 (2020) - 2020 • 53
Elevated temperature microstructure evolution of a medium-entropy CrCoNi superalloy containing Al,Ti
Slone, C.E. and George, E.P. and Mills, M.J.
JOURNAL OF ALLOYS AND COMPOUNDS. Volume: 817 (2020) - 2020 • 52
Deactivating deformation twinning in medium-entropy CrCoNi with small additions of aluminum and titanium
Slone, C.E. and LaRosa, C.R. and Zenk, C.H. and George, E.P. and Ghazisaeidi, M. and Mills, M.J.
SCRIPTA MATERIALIA. Volume: 178 (2020) - 2020 • 51
Comparison of cryogenic deformation of the concentrated solid solutions CoCrFeMnNi, CoCrNi and CoNi
Tirunilai, A.S. and Hanemann, T. and Reinhart, C. and Tschan, V. and Weiss, K.-P. and Laplanche, G. and Freudenberger, J. and Heilmaier, M. and Kauffmann, A.
MATERIALS SCIENCE AND ENGINEERING A. Volume: 783 (2020) - 2020 • 50
Correlative chemical and structural investigations of accelerated phase evolution in a nanocrystalline high entropy alloy
Li, Y.J. and Kostka, A. and Savan, A. and Ludwig, Al.
SCRIPTA MATERIALIA. Volume: 183 (2020) - 2020 • 49
Phase decomposition in a nanocrystalline CrCoNi alloy
Li, Y.J. and Kostka, A. and Savan, A. and Ludwig, Al.
SCRIPTA MATERIALIA. Volume: 188 (2020) - 2020 • 48
Effects of cryogenic temperature and grain size on fatigue-crack propagation in the medium-entropy CrCoNi alloy
Rackwitz, J. and Yu, Q. and Yang, Y. and Laplanche, G. and George, E.P. and Minor, A.M. and Ritchie, R.O.
ACTA MATERIALIA. Volume: 200 (2020) - 2020 • 47
High entropy alloys: A focused review of mechanical properties and deformation mechanisms
George, E.P. and Curtin, W.A. and Tasan, C.C.
ACTA MATERIALIA. Volume: 188 (2020) - 2020 • 46
Yield strength increase of a CoCrNi medium entropy alloy by interstitial nitrogen doping at maintained ductility
Moravcik, I. and Hadraba, H. and Li, L. and Dlouhy, I. and Raabe, D. and Li, Z.
SCRIPTA MATERIALIA. Volume: 178 (2020) - 2020 • 45
Interstitial doping enhances the strength-ductility synergy in a CoCrNi medium entropy alloy
Moravcik, I. and Hornik, V. and Minárik, P. and Li, L. and Dlouhy, I. and Janovska, M. and Raabe, D. and Li, Z.
MATERIALS SCIENCE AND ENGINEERING A. Volume: 781 (2020) - 2020 • 44
Microstructures, Heat Treatment, and Properties of Boron-Alloyed Tool Steels
Lentz, J. and Röttger, A. and Theisen, W.
STEEL RESEARCH INTERNATIONAL. Volume: 91 (2020) - 2019 • 43
Nonbasal Slip Systems Enable a Strong and Ductile Hexagonal-Close-Packed High-Entropy Phase
Bu, Y. and Li, Z. and Liu, J. and Wang, H. and Raabe, D. and Yang, W.
PHYSICAL REVIEW LETTERS. Volume: 122 (2019) - 2019 • 42
Shape-preserving machining produces gradient nanolaminate medium entropy alloys with high strain hardening capability
Guo, W. and Pei, Z. and Sang, X. and Poplawsky, J.D. and Bruschi, S. and Qu, J. and Raabe, D. and Bei, H.
ACTA MATERIALIA. Volume: 170 (2019) - 2019 • 41
Impact of interstitial C on phase stability and stacking-fault energy of the CrMnFeCoNi high-entropy alloy
Ikeda, Y. and Tanaka, I. and Neugebauer, J. and Körmann, F.
PHYSICAL REVIEW MATERIALS. Volume: 3 (2019) - 2019 • 40
Oxide Dispersion Strengthened Bond Coats with Higher Alumina Content: Oxidation Resistance and Influence on Thermal Barrier Coating Lifetime
Vorkötter, C. and Hagen, S.P. and Pintsuk, G. and Mack, D.E. and Virtanen, S. and Guillon, O. and Vaßen, R.
OXIDATION OF METALS. Volume: 92 (2019) - 2019 • 39
Strengthening of a CrMnFeCoNi high-entropy alloy by carbide precipitation
Gao, N. and Lu, D.H. and Zhao, Y.Y. and Liu, X.W. and Liu, G.H. and Wu, Y. and Liu, G. and Fan, Z.T. and Lu, Z.P. and George, E.P.
JOURNAL OF ALLOYS AND COMPOUNDS. Volume: (2019) - 2019 • 38
Elemental site occupancy in the L12 A3B ordered intermetallic phase in Co-based superalloys and its influence on the microstructure
Pandey, P. and Makineni, S.K. and Samanta, A. and Sharma, A. and Das, S.M. and Nithin, B. and Srivastava, C. and Singh, A.K. and Raabe, D. and Gault, B. and Chattopadhyay, K.
ACTA MATERIALIA. Volume: 163 (2019) - 2019 • 37
Joint contribution of transformation and twinning to the high strength-ductility combination of a FeMnCoCr high entropy alloy at cryogenic temperatures
He, Z.F. and Jia, N. and Ma, D. and Yan, H.L. and Li, Z.M. and Raabe, D.
MATERIALS SCIENCE AND ENGINEERING A. Volume: 759 (2019) - 2019 • 36
Segregation-driven grain boundary spinodal decomposition as a pathway for phase nucleation in a high-entropy alloy
Li, L. and Li, Z. and Kwiatkowski da Silva, A. and Peng, Z. and Zhao, H. and Gault, B. and Raabe, D.
ACTA MATERIALIA. Volume: 178 (2019) - 2019 • 35
Temperature and load-ratio dependent fatigue-crack growth in the CrMnFeCoNi high-entropy alloy
Thurston, K.V.S. and Gludovatz, B. and Yu, Q. and Laplanche, G. and George, E.P. and Ritchie, R.O.
JOURNAL OF ALLOYS AND COMPOUNDS. Volume: 794 (2019) - 2019 • 34
On the onset of deformation twinning in the CrFeMnCoNi high-entropy alloy using a novel tensile specimen geometry
Thurston, K.V.S. and Hohenwarter, A. and Laplanche, G. and George, E.P. and Gludovatz, B. and Ritchie, R.O.
INTERMETALLICS. Volume: 110 (2019) - 2019 • 33
Achieving ultra-high strength and ductility in equiatomic CrCoNi with partially recrystallized microstructures
Slone, C.E. and Miao, J. and George, E.P. and Mills, M.J.
ACTA MATERIALIA. Volume: 165 (2019) - 2019 • 32
Synthesis, microstructure, and hardness of rapidly solidified Cu-Cr alloys
Garzón-Manjón, A. and Christiansen, L. and Kirchlechner, I. and Breitbach, B. and Liebscher, C.H. and Springer, H. and Dehm, G.
JOURNAL OF ALLOYS AND COMPOUNDS. Volume: 794 (2019) - 2019 • 31
On the mechanism of extraordinary strain hardening in an interstitial high-entropy alloy under cryogenic conditions
Wang, Z. and Lu, W. and Raabe, D. and Li, Z.
JOURNAL OF ALLOYS AND COMPOUNDS. Volume: (2019) - 2019 • 30
Columnar to equiaxed transition and grain refinement of cast CrCoNi medium-entropy alloy by microalloying with titanium and carbon
Liu, X.W. and Laplanche, G. and Kostka, A. and Fries, S.G. and Pfetzing-Micklich, J. and Liu, G. and George, E.P.
JOURNAL OF ALLOYS AND COMPOUNDS. Volume: 775 (2019) - 2019 • 29
On the role of nitrogen on hydrogen environment embrittlement of high-interstitial austenitic CrMnC(N) steels
Egels, G. and Fussik, R. and Weber, S. and Theisen, W.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY. Volume: 44 (2019) - 2019 • 28
Concentration-dependent atomic mobilities in FCC CoCrFeMnNi high-entropy alloys
Gaertner, D. and Abrahams, K. and Kottke, J. and Esin, V.A. and Steinbach, I. and Wilde, G. and Divinski, S.V.
ACTA MATERIALIA. Volume: 166 (2019) - 2019 • 27
Cold spray deposition of Cr2AlC MAX phase for coatings and bond-coat layers
Go, T. and Sohn, Y.J. and Mauer, G. and Vaßen, R. and Gonzalez-Julian, J.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY. Volume: 39 (2019) - 2018 • 26
Carbide types in an advanced microalloyed bainitic/ferritic Cr–Mo Steel – TEM observations and thermodynamic calculations [Karbide in einem mikrolegierten bainitisch-ferritischen Cr–Mo-Stahl – TEM Charakterisierung und thermodynamische Berechnungen]
Wang, H. and Somsen, C. and Eggeler, G. and Detemple, E.
MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK. Volume: 49 (2018) - 2018 • 25
Phase stability and kinetics of σ-phase precipitation in CrMnFeCoNi high-entropy alloys
Laplanche, G. and Berglund, S. and Reinhart, C. and Kostka, A. and Fox, F. and George, E.P.
ACTA MATERIALIA. Volume: 161 (2018) - 2018 • 24
Hedgehog Spin-Vortex Crystal Antiferromagnetic Quantum Criticality in CaK (Fe1-xNix)4As4 Revealed by NMR
Ding, Q.-P. and Meier, W.R. and Cui, J. and Xu, M. and Böhmer, A.E. and Bud'Ko, S.L. and Canfield, P.C. and Furukawa, Y.
PHYSICAL REVIEW LETTERS. Volume: 121 (2018) - 2018 • 23
Thermal activation parameters of plastic flow reveal deformation mechanisms in the CrMnFeCoNi high-entropy alloy
Laplanche, G. and Bonneville, J. and Varvenne, C. and Curtin, W.A. and George, E.P.
ACTA MATERIALIA. Volume: 143 (2018) - 2018 • 22
Elemental partitioning and site-occupancy in γ/γ′ forming Co-Ti-Mo and Co-Ti-Cr alloys
Im, H.J. and Makineni, S.K. and Gault, B. and Stein, F. and Raabe, D. and Choi, P.-P.
SCRIPTA MATERIALIA. Volume: 154 (2018) - 2018 • 21
Development of high modulus steels based on the Fe – Cr – B system
Baron, C. and Springer, H. and Raabe, D.
MATERIALS SCIENCE AND ENGINEERING A. Volume: 724 (2018) - 2018 • 20
Microstructure and mechanical properties of Al0.7CoCrFeNi high-entropy-alloy prepared by directional solidification
Liu, G. and Liu, L. and Liu, X. and Wang, Z. and Han, Z. and Zhang, G. and Kostka, A.
INTERMETALLICS. Volume: 93 (2018) - 2018 • 19
Boron doped ultrastrong and ductile high-entropy alloys
Seol, J.B. and Bae, J.W. and Li, Z. and Chan Han, J. and Kim, J.G. and Raabe, D. and Kim, H.S.
ACTA MATERIALIA. Volume: 151 (2018) - 2018 • 18
Investigation of austenitic FeCrNi steels with regard to stacking-fault energy and thermal austenite stability
Fussik, R. and Walter, M. and Theisen, W. and Weber, S.
MATERIALIA. Volume: 3 (2018) - 2018 • 17
Hydrogen embrittlement of an interstitial equimolar high-entropy alloy
Luo, H. and Li, Z. and Lu, W. and Ponge, D. and Raabe, D.
CORROSION SCIENCE. Volume: 136 (2018) - 2018 • 16
Multiscale Characterization of Microstructure in Near-Surface Regions of a 16MnCr5 Gear Wheel After Cyclic Loading
Medghalchi, S. and Jamebozorgi, V. and Bala Krishnan, A. and Vincent, S. and Salomon, S. and Basir Parsa, A. and Pfetzing, J. and Kostka, A. and Li, Y. and Eggeler, G. and Li, T.
JOM. Volume: (2018) - 2018 • 15
Cold gas spraying of Ti-48Al-2Cr-2Nb intermetallic for jet engine applications
Bakan, E. and Mauer, G. and Sohn, Y.J. and Schwedt, A. and Rackel, M.W. and Riedlberger, F. and Pyczak, F. and Peters, J.O. and Mecklenburg, M. and Gartner, T.M. and Vaßen, R.
SURFACE AND COATINGS TECHNOLOGY. Volume: (2018) - 2017 • 14
Maintaining strength in supersaturated copper–chromium thin films annealed at 0.5 of the melting temperature of Cu
Raghavan, R. and Harzer, T.P. and Djaziri, S. and Hieke, S.W. and Kirchlechner, C. and Dehm, G.
JOURNAL OF MATERIALS SCIENCE. Volume: 52 (2017) - 2017 • 13
Electronic structure of metastable bcc Cu-Cr alloy thin films: Comparison of electron energy-loss spectroscopy and first-principles calculations
Liebscher, C.H. and Freysoldt, C. and Dennenwaldt, T. and Harzer, T.P. and Dehm, G.
ULTRAMICROSCOPY. Volume: 178 (2017) - 2017 • 12
Study of stability of microstructure and residual strain after thermal loading of plasma sprayed YSZ by through surface neutron scanning
Gibmeier, J. and Back, H.C. and Mutter, M. and Vollert, F. and Rebelo-Kornmeier, J. and Mücke, R. and Vaßen, R.
PHYSICA B: CONDENSED MATTER. Volume: (2017) - 2017 • 11
Manufacturing of high performance solid oxide fuel cells (SOFCs) with atmospheric plasma spraying (APS) and plasma spray-physical vapor deposition (PS-PVD)
Marcano, D. and Mauer, G. and Vaßen, R. and Weber, A.
SURFACE AND COATINGS TECHNOLOGY. Volume: 318 (2017) - 2017 • 10
In-situ tracking the structural and chemical evolution of nanostructured CuCr alloys
Zhang, Z. and Guo, J. and Dehm, G. and Pippan, R.
ACTA MATERIALIA. Volume: 138 (2017) - 2017 • 9
Insights into the deformation behavior of the CrMnFeCoNi high-entropy alloy revealed by elevated temperature nanoindentation
Maier-Kiener, V. and Schuh, B. and George, E.P. and Clemens, H. and Hohenwarter, A.
JOURNAL OF MATERIALS RESEARCH. Volume: 32 (2017) - 2017 • 8
Ab initio assisted design of quinary dual-phase high-entropy alloys with transformation-induced plasticity
Li, Z. and Körmann, F. and Grabowski, B. and Neugebauer, J. and Raabe, D.
ACTA MATERIALIA. Volume: 136 (2017) - 2017 • 7
Spinel-Structured ZnCr2O4 with Excess Zn Is the Active ZnO/Cr2O3 Catalyst for High-Temperature Methanol Synthesis
Song, H. and Laudenschleger, D. and Carey, J.J. and Ruland, H. and Nolan, M. and Muhler, M.
ACS CATALYSIS. Volume: 7 (2017) - 2016 • 6
First-principles modeling of energetic and mechanical properties of Ni-Cr, Ni-Re and Cr-Re random alloys
Breidi, A. and Fries, S.G. and Palumbo, M. and Ruban, A.V.
COMPUTATIONAL MATERIALS SCIENCE. Volume: 117 (2016) - 2016 • 5
Atom probe tomography of metallic nanostructures
Hono, K. and Raabe, D. and Ringer, S.P. and Seidman, D.N.
MRS BULLETIN. Volume: 41 (2016) - 2014 • 4
Synthesis, characterization, and nanoindentation response of single crystal Fe-Cr-Ni alloys with FCC and BCC structures
Xia, Y.Z. and Bei, H. and Gao, Y.F. and Catoor, D. and George, E.P.
MATERIALS SCIENCE AND ENGINEERING A. Volume: 611 (2014) - 2012 • 3
Effect of Si addition on the oxidation resistance of Co-Re-Cr-alloys: Recent attainments in the development of novel alloys
Gorr, B. and Burk, S. and Depka, T. and Somsen, C. and Abu-Samra, H. and Christ, H.-J. and Eggeler, G.
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH. Volume: 103 (2012) - 2011 • 2
High temperature test rig for inert atmosphere miniature specimen creep testing
Peter, D. and Otto, F. and Depka, T. and Nörtershäuser, P. and Eggeler, G.
MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK. Volume: 42 (2011) - 2010 • 1
Creep properties beyond 1100°C and microstructure of Co-Re-Cr alloys
Brunner, M. and Hüttner, R. and Bölitz, M.-C. and Völkl, R. and Mukherji, D. and Rösler, J. and Depka, T. and Somsen, C. and Eggeler, G. and Glatzel, U.
MATERIALS SCIENCE AND ENGINEERING A. Volume: 528 (2010)