- Ruhr-Universität Bochum
Scientific output
Publications
Below, you can either scroll through the complete list of our annually published research in peer-reviewed journals or search for a specific author or keyword via the free text search.
- 2026 • 122
Data-Driven analysis relates mechanical properties to pore morphology in laser powder bed fusion
Wang, Jaemin; Lee, Seungyeon; Kim, Yeon Woo; Kim, Kyung Tae; Park, Jeong Min; Raabe, Dierk
ACTA MATERIALIA. Volume: 304 (2026) - 2026 • 121
Surface morphology controls charge storage at the electrified Pt–water interface
Darby, Matthew T.; Saleh, Muhammad; Sulpizi, Marialore; Cucinotta, Clotilde S.
THE JOURNAL OF CHEMICAL PHYSICS. Volume: 164 (2026) - 2023 • 120
Ultrashort-Pulsed-Laser Annealing of Amorphous Atomic-Layer-Deposited MoS2 Films
Becher, M. J. M. J. and Jagosz, J. and Neubieser, R. and Wree, J. and Devi, A. and Michel, M. and Bock, C. and Gurevich, E. L. and Ostendorf, A.
ADVANCED ENGINEERING MATERIALS. Volume: 25 (2023) - 2023 • 119
Influence of hard phase size and spacing on the fatigue crack propagation in tool steels—Numerical simulation and experimental validation
Brackmann, L. and Wingender, D. and Weber, S. and Balzani, D. and Röttger, A.
FATIGUE AND FRACTURE OF ENGINEERING MATERIALS AND STRUCTURES. Volume: 46 (2023) - 2023 • 118
Numerical and experimental studies on crack nucleation and propagation in thin films
Harandi, A. and Rezaei, S. and Karimi Aghda, S. and Du, C. and Brepols, T. and Dehm, G. and Schneider, J. M. and Reese, S.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES. Volume: 258 (2023) - 2023 • 117
Accelerating Non-Empirical Structure Determination of Ziegler-Natta Catalysts with a High-Dimensional Neural Network Potential
Chikuma, H. and Takasao, G. and Wada, T. and Chammingkwan, P. and Behler, J. and Taniike, T.
JOURNAL OF PHYSICAL CHEMISTRY C. Volume: (2023) - 2023 • 116
Interface formation evolution of the hot-forged copper-(Cr)diamond composite and its thermal conductivity
Jia, S.Q. and Bolzoni, L. and Li, T. and Yang, F.
JOURNAL OF ALLOYS AND COMPOUNDS. Volume: 943 (2023) - 2022 • 115
Cementite decomposition in 100Cr6 bearing steel during high-pressure torsion: Influence of precipitate composition, size, morphology and matrix hardness
Kiranbabu, S. and Tung, P.-Y. and Sreekala, L. and Prithiv, T.S. and Hickel, T. and Pippan, R. and Morsdorf, L. and Herbig, M.
MATERIALS SCIENCE AND ENGINEERING A. Volume: 833 (2022) - 2022 • 114
On the impact of nanometric γ’ precipitates on the tensile deformation of superelastic Co49Ni21Ga30
Reul, A. and Lauhoff, C. and Krooß, P. and Somsen, C. and Langenkämper, D. and Gutmann, M.J. and Pedersen, B. and Hofmann, M. and Gan, W.M. and Kireeva, I. and Chumlyakov, Y.I. and Eggeler, G. and Niendorf, T. and Schmahl, W.W.
ACTA MATERIALIA. Volume: 230 (2022) - 2022 • 113
Influence of Heat Treatment Parameters on the Carbide Morphology of PM High-Speed Steel HS 6-5-3-8
Disch, N. and Benito, S. and Röttger, A. and Weber, S.
STEEL RESEARCH INTERNATIONAL. Volume: (2022) - 2022 • 112
Mechanism of coupled phase/morphology transformation of 2D manganese oxides through Fe galvanic exchange reaction
Aymerich-Armengol, R. and Cignoni, P. and Ebbinghaus, P. and Linnemann, J. and Rabe, M. and Tschulik, K. and Scheu, C. and Lim, J.
JOURNAL OF MATERIALS CHEMISTRY A. Volume: 10 (2022) - 2022 • 111
Hydrogen-based direct reduction of iron oxide at 700°C: Heterogeneity at pellet and microstructure scales
Ma, Y. and Souza Filho, I.R. and Zhang, X. and Nandy, S. and Barriobero-Vila, P. and Requena, G. and Vogel, D. and Rohwerder, M. and Ponge, D. and Springer, H. and Raabe, D.
INTERNATIONAL JOURNAL OF MINERALS, METALLURGY AND MATERIALS. Volume: 29 (2022) - 2022 • 110
Operando X-ray Powder Diffraction Study of Mechanochemical Activation Tested for the CO Oxidation over Au@Fe2O3 as Model Reaction
Petersen, H. and De Bellis, J. and Leiting, S. and Das, S.M. and Schmidt, W. and Schüth, F. and Weidenthaler, C.
CHEMCATCHEM. Volume: 14 (2022) - 2022 • 109
Experimental investigation of laser surface texturing and related biocompatibility of pure titanium
Li, H. and Wang, X. and Zhang, J. and Wang, B. and Breisch, M. and Hartmaier, A. and Rostotskyi, I. and Voznyy, V. and Liu, Y.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY. Volume: (2022) - 2022 • 108
Effects of aging on the stress-induced martensitic transformation and cyclic superelastic properties in Co-Ni-Ga shape memory alloy single crystals under compression
Lauhoff, C. and Reul, A. and Langenkämper, D. and Krooß, P. and Somsen, C. and Gutmann, M.J. and Pedersen, B. and Kireeva, I.V. and Chumlyakov, Y.I. and Eggeler, G. and Schmahl, W.W. and Niendorf, T.
ACTA MATERIALIA. Volume: 226 (2022) - 2022 • 107
Facet-Dependent Intrinsic Activity of Single Co3O4 Nanoparticles for Oxygen Evolution Reaction
Liu, Z. and Amin, H.M.A. and Peng, Y. and Corva, M. and Pentcheva, R. and Tschulik, K.
ADVANCED FUNCTIONAL MATERIALS. Volume: (2022) - 2021 • 106
Sensing and electrocatalytic activity of tungsten disulphide thin films fabricated via metal-organic chemical vapour deposition
Wree, J.-L. and Glauber, J.-P. and Öhl, D. and Niesen, A. and Kostka, A. and Rogalla, D. and Schuhmann, W. and Devi, A.
JOURNAL OF MATERIALS CHEMISTRY C. Volume: 9 (2021) - 2021 • 105
The Impact of Antimony on the Performance of Antimony Doped Tin Oxide Supported Platinum for the Oxygen Reduction Reaction
Jalalpoor, D. and Göhl, D. and Paciok, P. and Heggen, M. and Knossalla, J. and Radev, I. and Peinecke, V. and Weidenthaler, C. and Mayrhofer, K.J.J. and Ledendecker, M. and Schüth, F.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY. Volume: 168 (2021) - 2021 • 104
Mesoporous NiFe2O4 with Tunable Pore Morphology for Electrocatalytic Water Oxidation
Simon, C. and Timm, J. and Tetzlaff, D. and Jungmann, J. and Apfel, U.-P. and Marschall, R.
CHEMELECTROCHEM. Volume: 8 (2021) - 2021 • 103
Superior mechanical properties of a selective-laser-melted AlZnMgCuScZr alloy enabled by a tunable hierarchical microstructure and dual-nanoprecipitation
Zhu, Z. and Ng, F.L. and Seet, H.L. and Lu, W. and Liebscher, C.H. and Rao, Z. and Raabe, D. and Mui Ling Nai, S.
MATERIALS TODAY. Volume: (2021) - 2021 • 102
Reduction of surface morphology influence on THz reflection time domain spectroscopy for material classification by using multiple observation angles
Becke, L. and Gerling, A. and Hofmann, M.R. and Brenner, C.
PROCEEDINGS OF SPIE - THE INTERNATIONAL SOCIETY FOR OPTICAL ENGINEERING. Volume: 11685 (2021) - 2021 • 101
CALPHAD-informed phase-field modeling of grain boundary microchemistry and precipitation in Al-Zn-Mg-Cu alloys
Liu, C. and Garner, A. and Zhao, H. and Prangnell, P.B. and Gault, B. and Raabe, D. and Shanthraj, P.
ACTA MATERIALIA. Volume: 214 (2021) - 2021 • 100
Depth-sensing ductile and brittle deformation in 3C-SiC under Berkovich nanoindentation
Zhao, L. and Zhang, J. and Pfetzing, J. and Alam, M. and Hartmaier, A.
MATERIALS AND DESIGN. Volume: 197 (2021) - 2021 • 99
Atomistic investigation of machinability of monocrystalline 3C–SiC in elliptical vibration-assisted diamond cutting
Zhao, L. and Zhang, J. and Zhang, J. and Hartmaier, A.
CERAMICS INTERNATIONAL. Volume: 47 (2021) - 2020 • 98
Grain boundary segregation, phase formation, and their influence on the coercivity of rapidly solidified SmF e11Ti hard magnetic alloys
Palanisamy, D. and Ener, S. and Maccari, F. and Schäfer, L. and Skokov, K.P. and Gutfleisch, O. and Raabe, D. and Gault, B.
PHYSICAL REVIEW MATERIALS. Volume: 4 (2020) - 2020 • 97
Irreversible Structural Changes of Copper Hexacyanoferrate Used as a Cathode in Zn-Ion Batteries
Lim, J. and Kasiri, G. and Sahu, R. and Schweinar, K. and Hengge, K. and Raabe, D. and La Mantia, F. and Scheu, C.
CHEMISTRY - A EUROPEAN JOURNAL. Volume: 26 (2020) - 2020 • 96
Structure zone investigation of multiple principle element alloy thin films as optimization for nanoindentation measurements
Savan, A. and Allermann, T. and Wang, X. and Grochla, D. and Banko, L. and Kalchev, Y. and Kostka, A. and Pfetzing-Micklich, J. and Ludwig, Al.
MATERIALS. Volume: 13 (2020) - 2020 • 95
Factors Governing the Activity of α-MnO2 Catalysts in the Oxygen Evolution Reaction: Conductivity versus Exposed Surface Area of Cryptomelane
Heese-Gärtlein, J. and Morales, D.M. and Rabe, A. and Bredow, T. and Schuhmann, W. and Behrens, M.
CHEMISTRY - A EUROPEAN JOURNAL. Volume: 26 (2020) - 2020 • 94
Development of a recycling strategy for grinding sludge using supersolidus liquid phase sintering
Hankel, J. and Jäger, S. and Weber, S.
JOURNAL OF CLEANER PRODUCTION. Volume: 263 (2020) - 2020 • 93
Silicon Oxide Barrier Films Deposited on Polycarbonate Substrates in Pulsed Plasmas
Shafaei, S. and Yang, L. and Rudolph, M. and Awakowicz, P.
PLASMA CHEMISTRY AND PLASMA PROCESSING. Volume: 40 (2020) - 2020 • 92
Additive-free spin coating of tin oxide thin films: Synthesis, characterization and evaluation of tin β-ketoiminates as a new precursor class for solution deposition processes
Huster, N. and Zanders, D. and Karle, S. and Rogalla, D. and Devi, A.
DALTON TRANSACTIONS. Volume: 49 (2020) - 2020 • 91
Characterisation of micropores in plasma deposited SiO xfilms by means of positron annihilation lifetime spectroscopy
Hoppe, C. and Mitschker, F. and Butterling, M. and Liedke, M.O. and De Los Arcos, T. and Awakowicz, P. and Wagner, A. and Grundmeier, G.
JOURNAL OF PHYSICS D: APPLIED PHYSICS. Volume: 53 (2020) - 2020 • 90
Morphology, microstructure, coordinative unsaturation, and hydrogenation activity of unsupported MoS2: How idealized models fail to describe a real sulfide material
Bekx-Schürmann, S. and Mangelsen, S. and Breuninger, P. and Antoni, H. and Schürmann, U. and Kienle, L. and Muhler, M. and Bensch, W. and Grünert, W.
APPLIED CATALYSIS B: ENVIRONMENTAL. Volume: 266 (2020) - 2020 • 89
High-throughput characterization of Ag–V–O nanostructured thin-film materials libraries for photoelectrochemical solar water splitting
Kumari, S. and Helt, L. and Junqueira, J.R.C. and Kostka, A. and Zhang, S. and Sarker, S. and Mehta, A. and Scheu, C. and Schuhmann, W. and Ludwig, Al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY. Volume: 45 (2020) - 2019 • 88
Quantification of uncertain macroscopic material properties resulting from variations of microstructure morphology based on statistically similar volume elements: application to dual-phase steel microstructures
Miska, N. and Balzani, D.
COMPUTATIONAL MECHANICS. Volume: 64 (2019) - 2019 • 87
Multi-scale characterization of austenite reversion and martensite recovery in a cold-rolled medium-Mn steel
Benzing, J.T. and Kwiatkowski da Silva, A. and Morsdorf, L. and Bentley, J. and Ponge, D. and Dutta, A. and Han, J. and McBride, J.R. and Van Leer, B. and Gault, B. and Raabe, D. and Wittig, J.E.
ACTA MATERIALIA. Volume: 166 (2019) - 2019 • 86
On the effects of microstructure on the mechanical properties of open-pore Al–11Zn foams
Matz, A.M. and Matz, B.S. and Parsa, A.B. and Jost, N. and Eggeler, G.
MATERIALS SCIENCE AND ENGINEERING A. Volume: 759 (2019) - 2019 • 85
Effect of nanometric γ′-particles on the stress-induced martensitic transformation in 〈001〉-oriented Co49Ni21Ga30 shape memory alloy single crystals
Lauhoff, C. and Reul, A. and Langenkämper, D. and Krooß, P. and Somsen, C. and Gutmann, M.J. and Kireeva, I. and Chumlyakov, Y.I. and Schmahl, W.W. and Niendorf, T.
SCRIPTA MATERIALIA. Volume: 168 (2019) - 2019 • 84
The interaction between grain boundary and tool geometry in nanocutting of a bi-crystal copper
Wang, Z. and Sun, T. and Zhang, H. and Li, G. and Li, Z. and Zhang, J. and Yan, Y. and Hartmaier, A.
INTERNATIONAL JOURNAL OF EXTREME MANUFACTURING. Volume: 1 (2019) - 2019 • 83
Perspective of Surfactant-Free Colloidal Nanoparticles in Heterogeneous Catalysis
Reichenberger, S. and Marzun, G. and Muhler, M. and Barcikowski, S.
CHEMCATCHEM. Volume: 11 (2019) - 2019 • 82
Validation of a Terminally Amino Functionalized Tetra-Alkyl Sn(IV) Precursor in Metal–Organic Chemical Vapor Deposition of SnO2 Thin Films: Study of Film Growth Characteristics, Optical, and Electrical Properties
Zanders, D. and Ciftyurek, E. and Hoppe, C. and de los Arcos, T. and Kostka, A. and Rogalla, D. and Grundmeier, G. and Schierbaum, K.D. and Devi, A.
ADVANCED MATERIALS INTERFACES. Volume: 6 (2019) - 2019 • 81
Influence of Microstructural Features on the Strain Hardening Behavior of Additively Manufactured Metallic Components
Biswas, A. and Prasad, M.R.G. and Vajragupta, N. and ul Hassan, H. and Brenne, F. and Niendorf, T. and Hartmaier, A.
ADVANCED ENGINEERING MATERIALS. Volume: 21 (2019) - 2019 • 80
Catalytic Carbon Monoxide Oxidation over Potassium-Doped Manganese Dioxide Nanoparticles Synthesized by Spray Drying
Ollegott, K. and Peters, N. and Antoni, H. and Muhler, M.
EMISSION CONTROL SCIENCE AND TECHNOLOGY. Volume: (2019) - 2018 • 79
Phase stability and kinetics of σ-phase precipitation in CrMnFeCoNi high-entropy alloys
Laplanche, G. and Berglund, S. and Reinhart, C. and Kostka, A. and Fox, F. and George, E.P.
ACTA MATERIALIA. Volume: 161 (2018) - 2018 • 78
Systematic Investigation on the Influence of Spray Parameters on the Mechanical Properties of Atmospheric Plasma-Sprayed YSZ Coatings
Mutter, M. and Mauer, G. and Mücke, R. and Guillon, O. and Vaßen, R.
JOURNAL OF THERMAL SPRAY TECHNOLOGY. Volume: (2018) - 2018 • 77
Influence of microstructure morphology on multi-scale modeling of low-alloyed TRIP-steels
Prüger, S. and Gandhi, A. and Balzani, D.
ENGINEERING COMPUTATIONS (SWANSEA, WALES). Volume: 35 (2018) - 2018 • 76
On the accumulation of irreversible plastic strain during compression loading of open-pore metallic foams
Matz, A.M. and Matz, B.S. and Jost, N. and Eggeler, G.
MATERIALS SCIENCE AND ENGINEERING A. Volume: 728 (2018) - 2018 • 75
Nucleation driving force for ω-assisted formation of α and associated ω morphology in β-Ti alloys
Li, T. and Kent, D. and Sha, G. and Liu, H. and Fries, S.G. and Ceguerra, A.V. and Dargusch, M.S. and Cairney, J.M.
SCRIPTA MATERIALIA. Volume: 155 (2018) - 2017 • 74
Construction of statistically similar rves for the quantification of uncertainty associated with the material's microstructure morphology
Balzani, D. and Miska, N. and Pruger, S.
UNCECOMP 2017 - PROCEEDINGS OF THE 2ND INTERNATIONAL CONFERENCE ON UNCERTAINTY QUANTIFICATION IN COMPUTATIONAL SCIENCES AND ENGINEERING. Volume: 2017-January (2017) - 2017 • 73
Synthesis and characterization of germanosilicate molecular sieves: GeO2/SiO2 ratio, H2O/TO2 ratio and temperature
Jiao, K. and Zhang, Z. and Xu, X. and Lv, Z. and Song, J. and Lin, C. and Sun, J. and He, M. and Gies, H.
DALTON TRANSACTIONS. Volume: 46 (2017) - 2017 • 72
Correlation of splat morphologies with porosity and residual stress in plasma-sprayed YSZ coatings
Mutter, M. and Mauer, G. and Mücke, R. and Guillon, O. and Vaßen, R.
SURFACE AND COATINGS TECHNOLOGY. Volume: 318 (2017) - 2017 • 71
Influence of residual stress on the adhesion and surface morphology of PECVD-coated polypropylene
Jaritz, M. and Hopmann, C. and Behm, H. and Kirchheim, D. and Wilski, S. and Grochla, D. and Banko, L. and Ludwig, Al. and Böke, M. and Winter, J. and Bahre, H. and Dahlmann, R.
JOURNAL OF PHYSICS D: APPLIED PHYSICS. Volume: 50 (2017) - 2017 • 70
The effects of prior austenite grain boundaries and microstructural morphology on the impact toughness of intercritically annealed medium Mn steel
Han, J. and da Silva, A.K. and Ponge, D. and Raabe, D. and Lee, S.-M. and Lee, Y.-K. and Lee, S.-I. and Hwang, B.
ACTA MATERIALIA. Volume: 122 (2017) - 2017 • 69
Morphological analysis of cerium oxide stabilized nanoporous gold catalysts by soft X-ray ASAXS
Rumancev, C. and Von Gundlach, A.R. and Baier, S. and Wittstock, A. and Shi, J. and Benzi, F. and Senkbeil, T. and Stuhr, S. and Garamusx, V.M. and Grunwaldt, J.-D. and Rosenhahn, A.
RSC ADVANCES. Volume: 7 (2017) - 2016 • 68
The Formation and Morphology of Nanoparticle Supracrystals
Haubold, D. and Reichhelm, A. and Weiz, A. and Borchardt, L. and Ziegler, C. and Bahrig, L. and Kaskel, S. and Ruck, M. and Eychmüller, A.
ADVANCED FUNCTIONAL MATERIALS. Volume: 26 (2016) - 2016 • 67
Influence of the liquid on femtosecond laser ablation of iron
Kanitz, A. and Hoppius, J.S. and Gurevich, E.L. and Ostendorf, A.
PHYSICS PROCEDIA. Volume: 83 (2016) - 2016 • 66
Highly selective plasma-activated copper catalysts for carbon dioxide reduction to ethylene
Mistry, H. and Varela, A.S. and Bonifacio, C.S. and Zegkinoglou, I. and Sinev, I. and Choi, Y.-W. and Kisslinger, K. and Stach, E.A. and Yang, J.C. and Strasser, P. and Cuenya, B.R.
NATURE COMMUNICATIONS. Volume: 7 (2016) - 2016 • 65
In-situ metal matrix composite steels: Effect of alloying and annealing on morphology, structure and mechanical properties of TiB2 particle containing high modulus steels
Aparicio-Fernández, R. and Springer, H. and Szczepaniak, A. and Zhang, H. and Raabe, D.
ACTA MATERIALIA. Volume: 107 (2016) - 2016 • 64
Nanostructured Ti-Ta thin films synthesized by combinatorial glancing angle sputter deposition
Motemani, Y. and Khare, C. and Savan, A. and Hans, M. and Paulsen, A. and Frenzel, J. and Somsen, C. and Mücklich, F. and Eggeler, G. and Ludwig, Al.
NANOTECHNOLOGY. Volume: 27 (2016) - 2016 • 63
Characterization of mechanical properties of hydroxyapatite-silicon-multi walled carbon nano tubes composite coatings synthesized by EPD on NiTi alloys for biomedical application
Khalili, V. and Khalil-Allafi, J. and Sengstock, C. and Motemani, Y. and Paulsen, A. and Frenzel, J. and Eggeler, G. and Köller, M.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS. Volume: 59 (2016) - 2016 • 62
Preparing hydroxyapatite-silicon composite suspensions with homogeneous distribution of multi-walled carbon nano-tubes for electrophoretic coating of NiTi bone implant and their effect on the surface morphology
Khalili, V. and Khalil-Allafi, J. and Xia, W. and Parsa, A.B. and Frenzel, J. and Somsen, C. and Eggeler, G.
APPLIED SURFACE SCIENCE. Volume: 366 (2016) - 2015 • 61
Star-Shaped Crystallographic Cracking of Localized Nanoporous Defects
Renner, F.U. and Ankah, G.N. and Bashir, A. and Ma, D. and Biedermann, P.U. and Shrestha, B.R. and Nellessen, M. and Khorashadizadeh, A. and Losada-Pérez, P. and Duarte, M.J. and Raabe, D. and Valtiner, M.
ADVANCED MATERIALS. Volume: 27 (2015) - 2015 • 60
Effects of retained austenite volume fraction, morphology, and carbon content on strength and ductility of nanostructured TRIP-assisted steels
Shen, Y.F. and Qiu, L.N. and Sun, X. and Zuo, L. and Liaw, P.K. and Raabe, D.
MATERIALS SCIENCE AND ENGINEERING A. Volume: 636 (2015) - 2015 • 59
Microstructure, Shape Memory Effect and Functional Stability of Ti67 Ta33 Thin Films
Motemani, Y. and Kadletz, P.M. and Maier, B. and Rynko, R. and Somsen, C. and Paulsen, A. and Frenzel, J. and Schmahl, W.W. and Eggeler, G. and Ludwig, Al.
ADVANCED ENGINEERING MATERIALS. Volume: 17 (2015) - 2015 • 58
Influence of titanium nitride interlayer on the morphology, structure and electrochemical performance of magnetron-sputtered lithium iron phosphate thin films
Bünting, A. and Uhlenbruck, S. and Dellen, C. and Finsterbusch, M. and Tsai, C.-L. and Sebold, D. and Buchkremer, H.P. and Vaßen, R.
JOURNAL OF POWER SOURCES. Volume: 281 (2015) - 2015 • 57
Amphiphilic Pickering Emulsifiers Based on Mushroom-Type Janus Particles
Passas-Lagos, E. and Schüth, F.
LANGMUIR. Volume: 31 (2015) - 2015 • 56
From layered zeolite precursors to zeolites with a three-dimensional porosity: Textural and structural modifications through alkaline treatment
De Baerdemaeker, T. and Feyen, M. and Vanbergen, T. and Müller, U. and Yilmaz, B. and Xiao, F.-S. and Zhang, W. and Yokoi, T. and Bao, X. and De Vos, D.E. and Gies, H.
CHEMISTRY OF MATERIALS. Volume: 27 (2015) - 2015 • 55
Design of 3D statistically similar Representative Volume Elements based on Minkowski functionals
Scheunemann, L. and Balzani, D. and Brands, D. and Schröder, J.
MECHANICS OF MATERIALS. Volume: 90 (2015) - 2015 • 54
Multiphase microstructures via confined precipitation and dissolution of vessel phases: Example of austenite in martensitic steel
Belde, M. and Springer, H. and Inden, G. and Raabe, D.
ACTA MATERIALIA. Volume: 86 (2015) - 2014 • 53
Construction of two- and three-dimensional statistically similar RVEs for coupled micro-macro simulations
Balzani, D. and Scheunemann, L. and Brands, D. and Schröder, J.
COMPUTATIONAL MECHANICS. Volume: 54 (2014) - 2014 • 52
Rational design of the electrode morphology for oxygen evolution-enhancing the performance for catalytic water oxidation
Zeradjanin, A.R. and Topalov, A.A. and Van Overmeere, Q. and Cherevko, S. and Chen, X. and Ventosa, E. and Schuhmann, W. and Mayrhofer, K.J.J.
RSC ADVANCES. Volume: 4 (2014) - 2014 • 51
Effect of retained beta layer on slip transmission in Ti-6Al-2Zr-1Mo-1V near alpha titanium alloy during tensile deformation at room temperature
He, D. and Zhu, J. and Zaefferer, S. and Raabe, D.
MATERIALS AND DESIGN. Volume: 56 (2014) - 2014 • 50
Thermal cycling behavior of an aged FeNiCoAlTa single-crystal shape memory alloy
Krooß, P. and Holzweissig, M.J. and Niendorf, T. and Somsen, C. and Schaper, M. and Chumlyakov, Y.I. and Maier, H.J.
SCRIPTA MATERIALIA. Volume: 81 (2014) - 2014 • 49
Nano-scale morphology of melanosomes revealed by small-angle X-ray scattering
Gorniak, T. and Haraszti, T. and Garamus, V.M. and Buck, A.R. and Senkbeil, T. and Priebe, M. and Hedberg-Buenz, A. and Koehn, D. and Salditt, T. and Grunze, M. and Anderson, M.G. and Rosenhahn, A.
PLOS ONE. Volume: 9 (2014) - 2014 • 48
Adherence of human mesenchymal stem cells on Ti and TiO2 nano-columnar surfaces fabricated by glancing angle sputter deposition
Motemani, Y. and Greulich, C. and Khare, C. and Lopian, M. and Buenconsejo, P.J.S. and Schildhauer, T.A. and Ludwig, Al. and Köller, M.
APPLIED SURFACE SCIENCE. Volume: 292 (2014) - 2014 • 47
Physicochemical characteristics of drip waters: Influence on mineralogy and crystal morphology of recent cave carbonate precipitates
Riechelmann, S. and Schröder-Ritzrau, A. and Wassenburg, J.A. and Schreuer, J. and Richter, D.K. and Riechelmann, D.F.C. and Terente, M. and Constantin, S. and Mangini, A. and Immenhauser, A.
GEOCHIMICA ET COSMOCHIMICA ACTA. Volume: 145 (2014) - 2014 • 46
Hydrothermal synthesis of nitrogen-doped graphene hydrogels using amino acids with different acidities as doping agents
Wang, T. and Wang, L. and Wu, D. and Xia, W. and Zhao, H. and Jia, D.
JOURNAL OF MATERIALS CHEMISTRY A. Volume: 2 (2014) - 2014 • 45
Effect of processing parameters on MCrAlY bondcoat roughness and lifetime of APS-TBC systems
Nowak, W. and Naumenko, D. and Mor, G. and Mor, F. and Mack, D.E. and Vassen, R. and Singheiser, L. and Quadakkers, W.J.
SURFACE AND COATINGS TECHNOLOGY. Volume: 260 (2014) - 2014 • 44
Structure-related antibacterial activity of a titanium nanostructured surface fabricated by glancing angle sputter deposition
Sengstock, C. and Lopian, M. and Motemani, Y. and Borgmann, A. and Khare, C. and Buenconsejo, P.J.S. and Schildhauer, T.A. and Ludwig, Al. and Köller, M.
NANOTECHNOLOGY. Volume: 25 (2014) - 2014 • 43
Influence of layer type and order on barrier properties of multilayer PECVD barrier coatings
Bahroun, K. and Behm, H. and Mitschker, F. and Awakowicz, P. and Dahlmann, R. and Hopmann, C.
JOURNAL OF PHYSICS D: APPLIED PHYSICS. Volume: 47 (2014) - 2014 • 42
Improved morphology and performance of solution-processed metal-oxide thin-film transistors due to a polymer based interface modifier
Weber, C. and Oberberg, M. and Weber, D. and Bock, C. and Pham, D.V. and Kunze, U.
ADVANCED MATERIALS INTERFACES. Volume: 1 (2014) - 2014 • 41
Tailoring iron(III) oxide nanomorphology by chemical vapor deposition: Growth and characterization
Peeters, D. and Carraro, G. and Maccato, C. and Parala, H. and Gasparotto, A. and Barreca, D. and Sada, C. and Kartaschew, K. and Havenith, M. and Rogalla, D. and Becker, H.-W. and Devi, A.
PHYSICA STATUS SOLIDI (A) APPLICATIONS AND MATERIALS SCIENCE. Volume: 211 (2014) - 2014 • 40
Cu/ZnO nanocatalysts in response to environmental conditions: surface morphology, electronic structure, redox state and CO2 activation
Martinez-Suarez, L. and Frenzel, J. and Marx, D.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS. Volume: 16 (2014) - 2013 • 39
Formation of crystalline gamma-Al2O3 induced by variable substrate biasing during reactive magnetron sputtering
Prenzel, M. and Kortmann, A. and von Keudell, A. and Nahif, F. and Schneider, J. M. and Shihab, M. and Brinkmann, R. P.
JOURNAL OF PHYSICS D-APPLIED PHYSICS. Volume: 46 (2013) - 2013 • 38
Design of next generation thermal barrier coatings - Experiments and modelling
Gupta, M. and Curry, N. and Nylén, P. and Markocsan, N. and Vaßen, R.
SURFACE AND COATINGS TECHNOLOGY. Volume: 220 (2013) - 2013 • 37
Surface morphology and atomic structure of thin layers of Fe3Si on GaAs(001) and their magnetic properties
Noor, S. and Barsukov, I. and Özkan, M.S. and Elbers, L. and Melnichak, N. and Lindner, J. and Farle, M. and Köhler, U.
JOURNAL OF APPLIED PHYSICS. Volume: 113 (2013) - 2013 • 36
Nonlinear evolution of surface morphology under shadowing
Manz, P. and Fedorczak, N. and Dittmar, T. and Baloniak, T. and von Keudell, A.
PHYSICAL REVIEW E. Volume: 87 (2013) - 2013 • 35
Combined in situ FTIR-spectroscopic and electrochemical analysis of nanopores in ultra-thin SiOx-like plasma polymer barrier films
Liu, C.-N. and Ozkaya, B. and Steves, S. and Awakowicz, P. and Grundmeier, G.
JOURNAL OF PHYSICS D: APPLIED PHYSICS. Volume: 46 (2013) - 2013 • 34
Atomic engineering of platinum alloy surfaces
Li, T. and Bagot, P.A.J. and Marquis, E.A. and Edman Tsang, S.C. and Smith, G.D.W.
ULTRAMICROSCOPY. Volume: 132 (2013) - 2013 • 33
Nanostructured few-layer graphene with superior optical limiting properties fabricated by a catalytic steam etching process
Sun, Z. and Dong, N. and Xie, K. and Xia, W. and König, D. and Nagaiah, T.C. and Sánchez, M.D. and Ebbinghaus, P. and Erbe, A. and Zhang, X. and Ludwig, Al. and Schuhmann, W. and Wang, J. and Muhler, M.
JOURNAL OF PHYSICAL CHEMISTRY C. Volume: 117 (2013) - 2013 • 32
The biocompatibility of dense and porous Nickel-Titanium produced by selective laser melting
Habijan, T. and Haberland, C. and Meier, H. and Frenzel, J. and Wittsiepe, J. and Wuwer, C. and Greulich, C. and Schildhauer, T.A. and Köller, M.
MATERIALS SCIENCE AND ENGINEERING C. Volume: 33 (2013) - 2012 • 31
Utilization of the catalyst layer of dimensionally stable anodes - Interplay of morphology and active surface area
Zeradjanin, A.R. and La Mantia, F. and Masa, J. and Schuhmann, W.
ELECTROCHIMICA ACTA. Volume: 82 (2012) - 2012 • 30
Microsegregation and secondary phase formation during directional solidification of the single-crystal Ni-based superalloy LEK94
Lopez-Galilea, I. and Huth, S. and Fries, S.G. and Warnken, N. and Steinbach, I. and Theisen, W.
METALLURGICAL AND MATERIALS TRANSACTIONS A: PHYSICAL METALLURGY AND MATERIALS SCIENCE. Volume: 43 (2012) - 2012 • 29
PEDOT-CNT composite microelectrodes for recording and electrostimulation applications: Fabrication, morphology, and electrical properties
Gerwig, R. and Fuchsberger, K. and Schroeppel, B. and Link, G.S. and Heusel, G. and Kraushaar, U. and Schuhmann, W. and Stett, A. and Stelzle, M.
FRONTIERS IN NEUROENGINEERING. Volume: (2012) - 2012 • 28
Detailed kinetic modeling of methanol synthesis over a ternary copper catalyst
Peter, M. and Fichtl, M.B. and Ruland, H. and Kaluza, S. and Muhler, M. and Hinrichsen, O.
CHEMICAL ENGINEERING JOURNAL. Volume: 203 (2012) - 2012 • 27
Influences of deformation strain, strain rate and cooling rate on the Burgers orientation relationship and variants morphology during β→α phase transformation in a near α titanium alloy
He, D. and Zhu, J.C. and Zaefferer, S. and Raabe, D. and Liu, Y. and Lai, Z.L. and Yang, X.W.
MATERIALS SCIENCE AND ENGINEERING A. Volume: 549 (2012) - 2012 • 26
Synthesis of titanium carbonitride coating layers with star-shaped crystallite morphology
Garcia, J. and Pitonak, R. and Agudo, L. and Kostka, A.
MATERIALS LETTERS. Volume: 68 (2012) - 2012 • 25
Coarsening phenomena of metal nanoparticles and the influence of the support pre-treatment: Pt/TiO 2(110)
Behafarid, F. and Roldan Cuenya, B.
SURFACE SCIENCE. Volume: 606 (2012) - 2012 • 24
Influence of process parameters on the crystallinity, morphology and composition of tungsten oxide-based thin films grown by metalorganic chemical vapor deposition
De Los Arcos, T. and Cwik, S. and Milanov, A.P. and Gwildies, V. and Parala, H. and Wagner, T. and Birkner, A. and Rogalla, D. and Becker, H.-W. and Winter, J. and Ludwig, Al. and Fischer, R.A. and Devi, A.
THIN SOLID FILMS. Volume: 522 (2012) - 2012 • 23
Evaluation of different methods to eliminate adherent endotoxin of polyethylene wear particles
Paulus, A.C. and Schröder, C. and Sievers, B. and Frenzel, J. and Jansson, V. and Utzschneider, S.
WEAR. Volume: 294-295 (2012) - 2012 • 22
A scheme to combine molecular dynamics and dislocation dynamics
Brinckmann, S. and Mahajan, D.K. and Hartmaier, A.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING. Volume: 20 (2012) - 2012 • 21
Atomic layer deposition of Gd 2O 3 and Dy 2O 3: A study of the ALD characteristics and structural and electrical properties
Xu, K. and Ranjith, R. and Laha, A. and Parala, H. and Milanov, A.P. and Fischer, R.A. and Bugiel, E. and Feydt, J. and Irsen, S. and Toader, T. and Bock, C. and Rogalla, D. and Osten, H.-J. and Kunze, U. and Devi, A.
CHEMISTRY OF MATERIALS. Volume: 24 (2012) - 2012 • 20
Rare-earth substituted HfO2 thin films grown by metalorganic chemical vapor deposition
Devi, A. and Cwik, S. and Xu, K. and Milanov, A.P. and Noei, H. and Wang, Y. and Barreca, D. and Meijer, J. and Rogalla, D. and Kahn, D. and Cross, R. and Parala, H. and Paul, S.
THIN SOLID FILMS. Volume: 520 (2012) - 2011 • 19
In situ scanning tunneling microscopy study of selective dissolution of Au3Cu and Cu3Au (0 0 1)
Renner, F.U. and Eckstein, G.A. and Lymperakis, L. and Dakkouri-Baldauf, A. and Rohwerder, M. and Neugebauer, J. and Stratmann, M.
ELECTROCHIMICA ACTA. Volume: 56 (2011) - 2011 • 18
High-energy X-ray diffraction studies of i-Sc12Zn88
Goldman, A.I. and Kreyssig, A. and Nandi, S. and Kim, M.G. and Caudle, M.L. and Canfield, P.C.
PHILOSOPHICAL MAGAZINE. Volume: 91 (2011) - 2011 • 17
Malonate complexes of dysprosium: Synthesis, characterization and application for LI-MOCVD of dysprosium containing thin films
Milanov, A.P. and Seidel, R.W. and Barreca, D. and Gasparotto, A. and Winter, M. and Feydt, J. and Irsen, S. and Becker, H.-W. and Devi, A.
DALTON TRANSACTIONS. Volume: 40 (2011) - 2011 • 16
Atomic vapor deposition approach to In 2O 3 thin films
Hellwig, M. and Parala, H. and Cybinksa, J. and Barreca, D. and Gasparotto, A. and Niermann, B. and Becker, H.-W. and Rogalla, D. and Feydt, J. and Irsen, S. and Mudring, A.-V. and Winter, J. and Fischer, R.A. and Devi, A.
JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY. Volume: 11 (2011) - 2011 • 15
A new prototype two-phase (TiNi)-(β-W) SMA system with tailorable thermal hysteresis
Buenconsejo, P.J.S. and Zarnetta, R. and König, D. and Savan, A. and Thienhaus, S. and Ludwig, Al.
ADVANCED FUNCTIONAL MATERIALS. Volume: 21 (2011) - 2011 • 14
Visualization and functions of surface defects on carbon nanotubes created by catalytic etching
Xia, W. and Yin, X. and Kundu, S. and Sánchez, M. and Birkner, A. and Wöll, C. and Muhler, M.
CARBON. Volume: 49 (2011) - 2011 • 13
Current developments and challenges in thermal barrier coatings
Mauer, G. and Vaßen, R.
SURFACE ENGINEERING. Volume: 27 (2011) - 2011 • 12
Modelling of dendritic growth in ternary alloy solidification with melt convection
Sun, D.-K. and Zhu, M.-F. and Dai, T. and Cao, W.-S. and Chen, S.-L. and Raabe, D. and Hong, C.-P.
INTERNATIONAL JOURNAL OF CAST METALS RESEARCH. Volume: 24 (2011) - 2011 • 11
Molecular dynamics simulation study of microstructure evolution during cyclic martensitic transformations
Kastner, O. and Eggeler, G. and Weiss, W. and Ackland, G.J.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS. Volume: 59 (2011) - 2011 • 10
MOCVD of ZnO films from bis(ketoiminato)Zn(II) precursors: Structure, morphology and optical properties
Bekermann, D. and Ludwig, Ar. and Toader, T. and MacCato, C. and Barreca, D. and Gasparotto, A. and Bock, C. and Wieck, A.D. and Kunze, U. and Tondello, E. and Fischer, R.A. and Devi, A.
CHEMICAL VAPOR DEPOSITION. Volume: 17 (2011) - 2011 • 9
Morphologies of small droplets on patterned hydrophobic substrates
Moradi, N. and Gross, M. and Varnik, F. and Zikos, G. and Steinbach, I.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING. Volume: 19 (2011) - 2011 • 8
A facile synthesis of shape- and size-controlled α-Fe 2O3 nanoparticles through hydrothermal method
Wang, G.-H. and Li, W.-C. and Jia, K.-M. and Lu, A.-H. and Feyen, M. and Spliethoff, B. and SchÜth, F.
NANO. Volume: 6 (2011) - 2010 • 7
EBSD study of substructure and texture formation in dual-phase steel sheets for semi-finished products
Masimov, M. and Peranio, N. and Springub, B. and Roters, F. and Raabe, D.
SOLID STATE PHENOMENA. Volume: 160 (2010) - 2010 • 6
Focused ion beam/scanning electron microscopy tomography and conventional transmission electron microscopy assessment of Ni4Ti3 morphology in compression-aged Ni-rich Ni-Ti single crystals
Cao, S. and Somsen, C. and Croitoru, M. and Schryvers, D. and Eggeler, G.
SCRIPTA MATERIALIA. Volume: 62 (2010) - 2010 • 5
A review of crystallographic textures in chemical vapor-deposited diamond films
Liu, T. and Raabe, D. and Mao, W.-M.
SIGNAL, IMAGE AND VIDEO PROCESSING. Volume: 4 (2010) - 2010 • 4
A computational remodeling approach to predict the physiological architecture of the collagen fibril network in corneo-scleral shells
Grytz, R. and Meschke, G.
BIOMECHANICS AND MODELING IN MECHANOBIOLOGY. Volume: 9 (2010) - 2010 • 3
Temperature sensing by using whispering gallery modes with hollow core fibers
Özel, B. and Nett, R. and Weigel, T. and Schweiger, G. and Ostendorf, A.
MEASUREMENT SCIENCE AND TECHNOLOGY. Volume: 21 (2010) - 2009 • 2
Effect of the titania morphology on the Au/TiO2-catalyzed aerobic epoxidation of stilbene
Lignier, P. and Comotti, M. and Schüth, F. and Rousset, J.-L. and Caps, V.
CATALYSIS TODAY. Volume: 141 (2009) - 2009 • 1
Large scale morphology of ZnO(1 0over(1, ̄) 0)-surfaces
Kroll, M. and Kuschel, T. and Löber, T. and Köhler, U.
SURFACE SCIENCE. Volume: 603 (2009)