- Ruhr-Universität Bochum
Scientific output
Publications
Below, you can either scroll through the complete list of our annually published research in peer-reviewed journals or search for a specific author or keyword via the free text search.
- 2024 • 298
Effects of mechanical stress, chemical potential, and coverage on hydrogen solubility during hydrogen-enhanced decohesion of ferritic steel grain boundaries: A first-principles study
Azócar Guzmán, A. and Janisch, R.
PHYSICAL REVIEW MATERIALS. Volume: 8 (2024) - 2024 • 297
Stable nanofacets in [111] tilt grain boundaries of face-centered cubic metals
Brink, T. and Langenohl, L. and Pemma, S. and Liebscher, C. H. and Dehm, G.
PHYSICAL REVIEW MATERIALS. Volume: 8 (2024) - 2023 • 296
Interstitial Segregation has the Potential to Mitigate Liquid Metal Embrittlement in Iron
Ahmadian, A. and Scheiber, D. and Zhou, X. and Gault, B. and Romaner, L. and Kamachali, R. D. and Ecker, W. and Dehm, G. and Liebscher, C. H.
ADVANCED MATERIALS. Volume: 35 (2023) - 2023 • 295
Segregation-enhanced grain boundary embrittlement of recrystallised tungsten evidenced by site-specific microcantilever fracture
Tian, C. and Ma, Y. and Ghafarollahi, A. and Patil, P. and Dehm, G. and Bitzek, E. and Rasinski, M. and Best, J. P.
ACTA MATERIALIA. Volume: 259 (2023) - 2023 • 294
Multi-phase field modeling and simulation of magnetically driven grain boundary migration in SmCo polycrystals
Huo, L. and Schiedung, R. and Li, H. and Wang, G. and Hong, Y. and Grünebohm, A. and Steinbach, I.
JOURNAL OF PHYSICS D: APPLIED PHYSICS. Volume: 56 (2023) - 2023 • 293
Effect of grain size on critical twinning stress and work hardening behavior in the equiatomic CrMnFeCoNi high-entropy alloy
Wagner, C. and Laplanche, G.
INTERNATIONAL JOURNAL OF PLASTICITY. Volume: 166 (2023) - 2023 • 292
Role of Ag segregation on microscale strengthening and slip transmission in an asymmetric Σ5 copper grain boundary
Bhat, M. K. and Sukumar, P. T. and Langenohl, L. and Best, J. P. and Dehm, G.
ACTA MATERIALIA. Volume: 255 (2023) - 2023 • 291
Decoupling the electrical resistivity contribution of grain boundaries in dilute Fe-alloyed Cu thin films
Bishara, H. and Langenohl, L. and Zhou, X. and Gault, B. and Best, J.P. and Dehm, G.
SCRIPTA MATERIALIA. Volume: 230 (2023) - 2023 • 290
Universality of grain boundary phases in fcc metals: Case study on high-angle [111] symmetric tilt grain boundaries
Brink, T. and Langenohl, L. and Bishara, H. and Dehm, G.
PHYSICAL REVIEW B. Volume: 107 (2023) - 2023 • 289
Atomic motifs govern the decoration of grain boundaries by interstitial solutes
Zhou, X. and Ahmadian, A. and Gault, B. and Ophus, C. and Liebscher, C. H. and Dehm, G. and Raabe, D.
NATURE COMMUNICATIONS. Volume: 14 (2023) - 2023 • 288
Atomic-resolution observations of silver segregation in a [111] tilt grain boundary in copper
Langenohl, L. and Brink, T. and Richter, G. and Dehm, G. and Liebscher, C. H.
PHYSICAL REVIEW B. Volume: 107 (2023) - 2023 • 287
Towards active learning: A stopping criterion for the sequential sampling of grain boundary degrees of freedom
Schmalofski, T. and Kroll, M. and Dette, H. and Janisch, R.
MATERIALIA. Volume: 31 (2023) - 2023 • 286
Local measurement of geometrically necessary dislocation densities and their strengthening effect in ultra-high deformed pearlite
Li, Y. and Goto, S. and Kostka, A. and Herbig, M.
MATERIALS CHARACTERIZATION. Volume: 203 (2023) - 2023 • 285
Cyclic deformation behavior of an equiatomic CrFeNi multi-principal element alloy
Sisodia, S. and Rajkowski, M. and Laplanche, G. and Chauhan, A.
INTERNATIONAL JOURNAL OF FATIGUE. Volume: 174 (2023) - 2023 • 284
Disordering complexion transition of grain boundaries in bcc metals: Insights from atomistic simulations
Starikov, S. and Abbass, A. and Drautz, R. and Mrovec, M.
ACTA MATERIALIA. Volume: 261 (2023) - 2022 • 283
Quantitative analysis of grain boundary diffusion, segregation and precipitation at a sub-nanometer scale
Peng, Z. and Meiners, T. and Lu, Y. and Liebscher, C.H. and Kostka, A. and Raabe, D. and Gault, B.
ACTA MATERIALIA. Volume: 225 (2022) - 2022 • 282
Dislocation structure analysis in the strain gradient of torsion loading: A comparison between modelling and experiment
Stricker, M. and Ziemann, M. and Walter, M. and Weygand, S.M. and Gruber, P. and Weygand, D.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING. Volume: 30 (2022) - 2022 • 281
Making sustainable aluminum by recycling scrap: The science of “dirty” alloys
Raabe, D. and Ponge, D. and Uggowitzer, P.J. and Roscher, M. and Paolantonio, M. and Liu, C. and Antrekowitsch, H. and Kozeschnik, E. and Seidmann, D. and Gault, B. and De Geuser, F. and Deschamps, A. and Hutchinson, C. and Liu, C. and Li, Z. and Prangnell, P. and Robson, J. and Shanthraj, P. and Vakili, S. and Sinclair, C. and Bourgeois, L. and Pogatscher, S.
PROGRESS IN MATERIALS SCIENCE. Volume: 128 (2022) - 2022 • 280
Hydrogen-assisted decohesion associated with nanosized grain boundary κ-carbides in a high-Mn lightweight steel
Elkot, M.N. and Sun, B. and Zhou, X. and Ponge, D. and Raabe, D.
ACTA MATERIALIA. Volume: 241 (2022) - 2022 • 279
Influence of Mo/Cr ratio on the lamellar microstructure and mechanical properties of as-cast Al0.75CoCrFeNi compositionally complex alloys
Asabre, A. and Gemagami, P. and Parsa, A.B. and Wagner, C. and Kostka, A. and Laplanche, G.
JOURNAL OF ALLOYS AND COMPOUNDS. Volume: 899 (2022) - 2022 • 278
Efficient reconstruction of prior austenite grains in steel from etched light optical micrographs using deep learning and annotations from correlative microscopy
Bachmann, B.-I. and Müller, M. and Britz, D. and Durmaz, A.R. and Ackermann, M. and Shchyglo, O. and Staudt, T. and Mücklich, F.
FRONTIERS IN MATERIALS. Volume: 9 (2022) - 2022 • 277
Understanding Alkali Contamination in Colloidal Nanomaterials to Unlock Grain Boundary Impurity Engineering
Kim, S.-H. and Yoo, S.-H. and Chakraborty, P. and Jeong, J. and Lim, J. and El-Zoka, A.A. and Zhou, X. and Stephenson, L.T. and Hickel, T. and Neugebauer, J. and Scheu, C. and Todorova, M. and Gault, B.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY. Volume: 144 (2022) - 2022 • 276
Non-uniform He bubble formation in W/W2C composite: Experimental and ab-initio study
Šestan, A. and Sreekala, L. and Markelj, S. and Kelemen, M. and Zavašnik, J. and Liebscher, C.H. and Dehm, G. and Hickel, T. and Čeh, M. and Novak, S. and Jenuš, P.
ACTA MATERIALIA. Volume: 226 (2022) - 2022 • 275
Understanding the Degradation of a Model Si Anode in a Li-Ion Battery at the Atomic Scale
Kim, S.-H. and Dong, K. and Zhao, H. and El-Zoka, A.A. and Zhou, X. and Woods, E.V. and Giuliani, F. and Manke, I. and Raabe, D. and Gault, B.
JOURNAL OF PHYSICAL CHEMISTRY LETTERS. Volume: 13 (2022) - 2022 • 274
Quantification of extremely small-structured ferritic-austenitic phase fractions in stainless steels manufactured by laser powder bed fusion
Becker, L. and Boes, J. and Lentz, J. and Cui, C. and Uhlenwinkel, V. and Steinbacher, M. and Fechte-Heinen, R. and Theisen, W. and Weber, S.
MATERIALIA. Volume: 22 (2022) - 2022 • 273
Revealing in-plane grain boundary composition features through machine learning from atom probe tomography data
Zhou, X. and Wei, Y. and Kühbach, M. and Zhao, H. and Vogel, F. and Darvishi Kamachali, R. and Thompson, G.B. and Raabe, D. and Gault, B.
ACTA MATERIALIA. Volume: 226 (2022) - 2021 • 272
Grain boundary energy landscape from the shape analysis of synthetically stabilized embedded grains
Schratt, A.A. and Steinbach, I. and Mohles, V.
COMPUTATIONAL MATERIALS SCIENCE. Volume: 193 (2021) - 2021 • 271
Elemental segregation to lattice defects in the CrMnFeCoNi high-entropy alloy during high temperature exposures
Heczko, M. and Mazánová, V. and Gröger, R. and Záležák, T. and Hooshmand, M.S. and George, E.P. and Mills, M.J. and Dlouhý, A.
ACTA MATERIALIA. Volume: 208 (2021) - 2021 • 270
Properties of α-Brass Nanoparticles II: Structure and Composition
Weinreich, J. and Paleico, M.L. and Behler, J.
JOURNAL OF PHYSICAL CHEMISTRY C. Volume: 125 (2021) - 2021 • 269
Recrystallization kinetics, mechanisms, and topology in alloys processed by laser powder-bed fusion: AISI 316L stainless steel as example
Aota, L.S. and Bajaj, P. and Zilnyk, K.D. and Jägle, E.A. and Ponge, D. and Sandim, H.R.Z. and Raabe, D.
MATERIALIA. Volume: 20 (2021) - 2021 • 268
Laser metal deposition of Al0.6CoCrFeNi with Ti & C additions using elemental powder blends
Asabre, A. and Wilms, M.B. and Kostka, A. and Gemagami, P. and Weisheit, A. and Laplanche, G.
SURFACE AND COATINGS TECHNOLOGY. Volume: 418 (2021) - 2021 • 267
Atomic scale understanding of phase stability and decomposition of a nanocrystalline CrMnFeCoNi Cantor alloy
Li, Y.J. and Savan, A. and Ludwig, A.
APPLIED PHYSICS LETTERS. Volume: 119 (2021) - 2021 • 266
Faceting diagram for Ag segregation induced nanofaceting at an asymmetric Cu tilt grain boundary
Peter, N.J. and Duarte, M.J. and Kirchlechner, C. and Liebscher, C.H. and Dehm, G.
ACTA MATERIALIA. Volume: 214 (2021) - 2021 • 265
CALPHAD-informed phase-field modeling of grain boundary microchemistry and precipitation in Al-Zn-Mg-Cu alloys
Liu, C. and Garner, A. and Zhao, H. and Prangnell, P.B. and Gault, B. and Raabe, D. and Shanthraj, P.
ACTA MATERIALIA. Volume: 214 (2021) - 2021 • 264
Magnetoelectric Tuning of Pinning-Type Permanent Magnets through Atomic-Scale Engineering of Grain Boundaries
Ye, X. and Yan, F. and Schäfer, L. and Wang, D. and Geßwein, H. and Wang, W. and Chellali, M.R. and Stephenson, L.T. and Skokov, K. and Gutfleisch, O. and Raabe, D. and Hahn, H. and Gault, B. and Kruk, R.
ADVANCED MATERIALS. Volume: 33 (2021) - 2021 • 263
Angular-dependent interatomic potential for large-scale atomistic simulation of iron: Development and comprehensive comparison with existing interatomic models
Starikov, S. and Smirnova, D. and Pradhan, T. and Lysogorskiy, Y. and Chapman, H. and Mrovec, M. and Drautz, R.
PHYSICAL REVIEW MATERIALS. Volume: 5 (2021) - 2021 • 262
Dopant-segregation to grain boundaries controls electrical conductivity of n-type NbCo(Pt)Sn half-Heusler alloy mediating thermoelectric performance
Luo, T. and Serrano-Sánchez, F. and Bishara, H. and Zhang, S. and Villoro, B. and Kuo, J.J. and Felser, C. and Scheu, C. and Snyder, G.J. and Best, J.P. and Dehm, G. and Yu, Y. and Raabe, D. and Fu, C. and Gault, B.
ACTA MATERIALIA. Volume: 217 (2021) - 2021 • 261
Spinodal Decomposition in Nanocrystalline Alloys
Zhou, X. and Darvishi Kamachali, R. and Boyce, B.L. and Clark, B.G. and Raabe, D. and Thompson, G.B.
ACTA MATERIALIA. Volume: 215 (2021) - 2021 • 260
Superior mechanical properties of a selective-laser-melted AlZnMgCuScZr alloy enabled by a tunable hierarchical microstructure and dual-nanoprecipitation
Zhu, Z. and Ng, F.L. and Seet, H.L. and Lu, W. and Liebscher, C.H. and Rao, Z. and Raabe, D. and Mui Ling Nai, S.
MATERIALS TODAY. Volume: (2021) - 2021 • 259
Reducing hot tearing by grain boundary segregation engineering in additive manufacturing: example of an AlxCoCrFeNi high-entropy alloy
Sun, Z. and Tan, X. and Wang, C. and Descoins, M. and Mangelinck, D. and Tor, S.B. and Jägle, E.A. and Zaefferer, S. and Raabe, D.
ACTA MATERIALIA. Volume: 204 (2021) - 2021 • 258
Understanding Grain Boundary Electrical Resistivity in Cu: The Effect of Boundary Structure
Bishara, H. and Lee, S. and Brink, T. and Ghidelli, M. and Dehm, G.
ACS NANO. Volume: 15 (2021) - 2021 • 257
Correlation between grain size and carbon content in white etching areas in bearings
Mayweg, D. and Morsdorf, L. and Li, Y. and Herbig, M.
ACTA MATERIALIA. Volume: 215 (2021) - 2021 • 256
Phase-field modeling of chemoelastic binodal/spinodal relations and solute segregation to defects in binary alloys
Mianroodi, J.R. and Shanthraj, P. and Svendsen, B. and Raabe, D.
MATERIALS. Volume: 14 (2021) - 2021 • 255
Effect of Heat Treatment on the Microstructure of Cast Martensitic Stainless Steel Einfluss der Wärmebehandlung auf die Mikrostruktur von nichtrostendem martensitischen Stahlguss
Van Gen Hassend, F. and Weber, S.
PRAKTISCHE METALLOGRAPHIE/PRACTICAL METALLOGRAPHY. Volume: 58 (2021) - 2021 • 254
Plasticity induced by nanoindentation in a CrCoNi medium-entropy alloy studied by accurate electron channeling contrast imaging revealing dislocation-low angle grain boundary interactions
Habiyaremye, F. and Guitton, A. and Schäfer, F. and Scholz, F. and Schneider, M. and Frenzel, J. and Laplanche, G. and Maloufi, N.
MATERIALS SCIENCE AND ENGINEERING A. Volume: 817 (2021) - 2021 • 253
Effects of temperature on mechanical properties and deformation mechanisms of the equiatomic CrFeNi medium-entropy alloy
Schneider, M. and Laplanche, G.
ACTA MATERIALIA. Volume: 204 (2021) - 2021 • 252
Density-based grain boundary phase diagrams: Application to Fe-Mn-Cr, Fe-Mn-Ni, Fe-Mn-Co, Fe-Cr-Ni and Fe-Cr-Co alloy systems
Wang, L. and Darvishi Kamachali, R.
ACTA MATERIALIA. Volume: 207 (2021) - 2021 • 251
Incorporating elasticity into CALPHAD-informed density-based grain boundary phase diagrams reveals segregation transition in Al-Cu and Al-Cu-Mg alloys
Wang, L. and Darvishi Kamachali, R.
COMPUTATIONAL MATERIALS SCIENCE. Volume: 199 (2021) - 2021 • 250
A 3d analysis of dendritic solidification and mosaicity in ni-based single crystal superalloys
Scholz, F. and Cevik, M. and Hallensleben, P. and Thome, P. and Eggeler, G. and Frenzel, J.
MATERIALS. Volume: 14 (2021) - 2020 • 249
Grain boundary energy effect on grain boundary segregation in an equiatomic high-entropy alloy
Li, L. and Kamachali, R.D. and Li, Z. and Zhang, Z.
PHYSICAL REVIEW MATERIALS. Volume: 4 (2020) - 2020 • 248
Interplay of Chemistry and Faceting at Grain Boundaries in a Model Al Alloy
Zhao, H. and Huber, L. and Lu, W. and Peter, N.J. and An, D. and De Geuser, F. and Dehm, G. and Ponge, D. and Neugebauer, J. and Gault, B. and Raabe, D.
PHYSICAL REVIEW LETTERS. Volume: 124 (2020) - 2020 • 247
(Al, Zn)3Zr dispersoids assisted η′ precipitation in anAl-Zn-Mg-Cu-Zr alloy
Zhao, H. and Chen, Y. and Gault, B. and Makineni, S.K. and Ponge, D. and Raabe, D.
MATERIALIA. Volume: 10 (2020) - 2020 • 246
Reversion and re-aging of a peak aged Al-Zn-Mg-Cu alloy
Zhao, H. and Gault, B. and Ponge, D. and Raabe, D.
SCRIPTA MATERIALIA. Volume: 188 (2020) - 2020 • 245
Approaches to Measure the Resistivity of Grain Boundaries in Metals with High Sensitivity and Spatial Resolution: A Case Study Employing Cu
Bishara, H. and Ghidelli, M. and Dehm, G.
ACS APPLIED ELECTRONIC MATERIALS. Volume: 2 (2020) - 2020 • 244
Elucidating the dual role of grain boundaries as dislocation sources and obstacles and its impact on toughness and brittle-to-ductile transition
Reiser, J. and Hartmaier, A.
SCIENTIFIC REPORTS. Volume: 10 (2020) - 2020 • 243
Role of inclination dependence of grain boundary energy on the microstructure evolution during grain growth
Salama, H. and Kundin, J. and Shchyglo, O. and Mohles, V. and Marquardt, K. and Steinbach, I.
ACTA MATERIALIA. Volume: 188 (2020) - 2020 • 242
Structure zone investigation of multiple principle element alloy thin films as optimization for nanoindentation measurements
Savan, A. and Allermann, T. and Wang, X. and Grochla, D. and Banko, L. and Kalchev, Y. and Kostka, A. and Pfetzing-Micklich, J. and Ludwig, Al.
MATERIALS. Volume: 13 (2020) - 2020 • 241
Tantalum and zirconium induced structural transitions at complex [111] tilt grain boundaries in copper
Meiners, T. and Duarte, J.M. and Richter, G. and Dehm, G. and Liebscher, C.H.
ACTA MATERIALIA. Volume: 190 (2020) - 2020 • 240
Analysis of strengthening due to grain boundaries and annealing twin boundaries in the CrCoNi medium-entropy alloy
Schneider, M. and George, E.P. and Manescau, T.J. and Záležák, T. and Hunfeld, J. and Dlouhý, A. and Eggeler, G. and Laplanche, G.
INTERNATIONAL JOURNAL OF PLASTICITY. Volume: 124 (2020) - 2020 • 239
Size dependent strength, slip transfer and slip compatibility in nanotwinned silver
Kini, M.K. and Dehm, G. and Kirchlechner, C.
ACTA MATERIALIA. Volume: 184 (2020) - 2020 • 238
Hydrogen embrittlement at cleavage planes and grain boundaries in bcc iron—revisiting the first-principles cohesive zone model
Guzmán, A.A. and Jeon, J. and Hartmaier, A. and Janisch, R.
MATERIALS. Volume: 13 (2020) - 2020 • 237
Towards an understanding of grain boundary step in diamond cutting of polycrystalline copper
Wang, Z. and Zhang, J. and Zhang, J. and Li, G. and Zhang, H. and ul Hassan, H. and Hartmaier, A. and Yan, Y. and Sun, T.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY. Volume: 276 (2020) - 2020 • 236
Probing catalytic surfaces by correlative scanning photoemission electron microscopy and atom probe tomography
Schweinar, K. and Nicholls, R.L. and Rajamathi, C.R. and Zeller, P. and Amati, M. and Gregoratti, L. and Raabe, D. and Greiner, M. and Gault, B. and Kasian, O.
JOURNAL OF MATERIALS CHEMISTRY A. Volume: 8 (2020) - 2020 • 235
Microstructure evolution and thermal stability of equiatomic CoCrFeNi films on (0001) α-Al2O3
Addab, Y. and Kini, M.K. and Courtois, B. and Savan, A. and Ludwig, Al. and Bozzolo, N. and Scheu, C. and Dehm, G. and Chatain, D.
ACTA MATERIALIA. Volume: 200 (2020) - 2020 • 234
Phase diagram of grain boundary facet and line junctions in silicon
Alam, M. and Lymperakis, L. and Neugebauer, J.
PHYSICAL REVIEW MATERIALS. Volume: 4 (2020) - 2020 • 233
Recent Developments in Small-Scale Shape Memory Oxides
Wang, X. and Ludwig, Al.
SHAPE MEMORY AND SUPERELASTICITY. Volume: 6 (2020) - 2020 • 232
Formation mechanism of κ-carbides and deformation behavior in Si-alloyed FeMnAlC lightweight steels
Wang, Z. and Lu, W. and Zhao, H. and He, J. and Wang, K. and Zhou, B. and Ponge, D. and Raabe, D. and Li, Z.
ACTA MATERIALIA. Volume: 198 (2020) - 2020 • 231
Segregation-assisted spinodal and transient spinodal phase separation at grain boundaries
Darvishi Kamachali, R. and Kwiatkowski da Silva, A. and McEniry, E. and Ponge, D. and Gault, B. and Neugebauer, J. and Raabe, D.
NPJ COMPUTATIONAL MATERIALS. Volume: 6 (2020) - 2020 • 230
A model for grain boundary thermodynamics
Darvishi Kamachali, R.
RSC ADVANCES. Volume: 10 (2020) - 2020 • 229
On the rhenium segregation at the low angle grain boundary in a single crystal Ni-base superalloy
He, J. and Scholz, F. and Horst, O.M. and Thome, P. and Frenzel, J. and Eggeler, G. and Gault, B.
SCRIPTA MATERIALIA. Volume: 185 (2020) - 2020 • 228
Chemical boundary engineering: A new route toward lean, ultrastrong yet ductile steels
Ding, R. and Yao, Y. and Sun, B. and Liu, G. and He, J. and Li, T. and Wan, X. and Dai, Z. and Ponge, D. and Raabe, D. and Zhang, C. and Godfrey, A. and Miyamoto, G. and Furuhara, T. and Yang, Z. and van der Zwaag, S. and Chen, H.
SCIENCE ADVANCES. Volume: 6 (2020) - 2020 • 227
Hydrogen resistance of a 1 GPa strong equiatomic CoCrNi medium entropy alloy
Soundararajan, C.K. and Luo, H. and Raabe, D. and Li, Z.
CORROSION SCIENCE. Volume: 167 (2020) - 2020 • 226
Grain boundary segregation, phase formation, and their influence on the coercivity of rapidly solidified SmF e11Ti hard magnetic alloys
Palanisamy, D. and Ener, S. and Maccari, F. and Schäfer, L. and Skokov, K.P. and Gutfleisch, O. and Raabe, D. and Gault, B.
PHYSICAL REVIEW MATERIALS. Volume: 4 (2020) - 2020 • 225
Study of grain boundary self-diffusion in iron with different atomistic models
Starikov, S. and Mrovec, M. and Drautz, R.
ACTA MATERIALIA. Volume: 188 (2020) - 2020 • 224
Growth kinetics of σ-phase precipitates and underlying diffusion processes in CrMnFeCoNi high-entropy alloys
Laplanche, G.
ACTA MATERIALIA. Volume: 199 (2020) - 2020 • 223
Comparison of Spectra of Grain Boundaries Spontaneously Formed in Cu-Ag and Cu-In Systems
Straumal, A.B. and Tsoi, K.V. and Mazilkin, I.A. and Rodin, A.O. and Eggeler, G.
JETP LETTERS. Volume: 111 (2020) - 2020 • 222
Deformation mechanisms in a superelastic NiTi alloy: An in-situ high resolution digital image correlation study
Polatidis, E. and Šmíd, M. and Kuběna, I. and Hsu, W.-N. and Laplanche, G. and Van Swygenhoven, H.
MATERIALS AND DESIGN. Volume: 191 (2020) - 2020 • 221
Correlative chemical and structural investigations of accelerated phase evolution in a nanocrystalline high entropy alloy
Li, Y.J. and Kostka, A. and Savan, A. and Ludwig, Al.
SCRIPTA MATERIALIA. Volume: 183 (2020) - 2020 • 220
Dependence of hydrogen embrittlement mechanisms on microstructure-driven hydrogen distribution in medium Mn steels
Sun, B. and Krieger, W. and Rohwerder, M. and Ponge, D. and Raabe, D.
ACTA MATERIALIA. Volume: 183 (2020) - 2019 • 219
Influence of composition and precipitation evolution on damage at grain boundaries in a crept polycrystalline Ni-based superalloy
Kontis, P. and Kostka, A. and Raabe, D. and Gault, B.
ACTA MATERIALIA. Volume: 166 (2019) - 2019 • 218
Atomic-scale grain boundary engineering to overcome hot-cracking in additively-manufactured superalloys
Kontis, P. and Chauvet, E. and Peng, Z. and He, J. and da Silva, A.K. and Raabe, D. and Tassin, C. and Blandin, J.-J. and Abed, S. and Dendievel, R. and Gault, B. and Martin, G.
ACTA MATERIALIA. Volume: 177 (2019) - 2019 • 217
Oxygen-mediated deformation and grain refinement in Cu-Fe nanocrystalline alloys
Guo, J. and Duarte, M.J. and Zhang, Y. and Bachmaier, A. and Gammer, C. and Dehm, G. and Pippan, R. and Zhang, Z.
ACTA MATERIALIA. Volume: 166 (2019) - 2019 • 216
Shape-preserving machining produces gradient nanolaminate medium entropy alloys with high strain hardening capability
Guo, W. and Pei, Z. and Sang, X. and Poplawsky, J.D. and Bruschi, S. and Qu, J. and Raabe, D. and Bei, H.
ACTA MATERIALIA. Volume: 170 (2019) - 2019 • 215
Oxide Dispersion Strengthened Bond Coats with Higher Alumina Content: Oxidation Resistance and Influence on Thermal Barrier Coating Lifetime
Vorkötter, C. and Hagen, S.P. and Pintsuk, G. and Mack, D.E. and Virtanen, S. and Guillon, O. and Vaßen, R.
OXIDATION OF METALS. Volume: 92 (2019) - 2019 • 214
Density, distribution and nature of planar faults in silver antimony telluride for thermoelectric applications
Abdellaoui, L. and Zhang, S. and Zaefferer, S. and Bueno-Villoro, R. and Baranovskiy, A. and Cojocaru-Mirédin, O. and Yu, Y. and Amouyal, Y. and Raabe, D. and Snyder, G.J. and Scheu, C.
ACTA MATERIALIA. Volume: 178 (2019) - 2019 • 213
Influence of bulk energy and triple junction mobility on interface kinetics - A tool for interpretation of experiments
Hackl, K. and Khan, A.U. and Fischer, F.D. and Svoboda, J.
ACTA MATERIALIA. Volume: 174 (2019) - 2019 • 212
Variable chemical decoration of extended defects in Cu-poor C u2ZnSnS e4 thin films
Schwarz, T. and Redinger, A. and Siebentritt, S. and Peng, Z. and Gault, B. and Raabe, D. and Choi, P.-P.
PHYSICAL REVIEW MATERIALS. Volume: 3 (2019) - 2019 • 211
Crystal plasticity finite element modeling and simulation of diamond cutting of polycrystalline copper
Wang, Z. and Zhang, J. and Xu, Z. and Zhang, J. and Hassan, H.U. and Li, G. and Zhang, H. and Hartmaier, A. and Fang, F. and Yan, Y. and Sun, T.
JOURNAL OF MANUFACTURING PROCESSES. Volume: 38 (2019) - 2019 • 210
Misorientation-dependent solute enrichment at interfaces and its contribution to defect formation mechanisms during laser additive manufacturing of superalloys
Hariharan, A. and Lu, L. and Risse, J. and Kostka, A. and Gault, B. and Jägle, E.A. and Raabe, D.
PHYSICAL REVIEW MATERIALS. Volume: 3 (2019) - 2019 • 209
Effect of Nb on improving the impact toughness of Mo-containing low-alloyed steels
Wang, H.C. and Somsen, C. and Li, Y.J. and Fries, S.G. and Detemple, E. and Eggeler, G.
JOURNAL OF MATERIALS SCIENCE. Volume: 54 (2019) - 2019 • 208
Tungsten carbide as a deoxidation agent for plasma-facing tungsten-based materials
Šestan, A. and Zavašnik, J. and Kržmanc, M.M. and Kocen, M. and Jenuš, P. and Novak, S. and Čeh, M. and Dehm, G.
JOURNAL OF NUCLEAR MATERIALS. Volume: 524 (2019) - 2019 • 207
The interaction between grain boundary and tool geometry in nanocutting of a bi-crystal copper
Wang, Z. and Sun, T. and Zhang, H. and Li, G. and Li, Z. and Zhang, J. and Yan, Y. and Hartmaier, A.
INTERNATIONAL JOURNAL OF EXTREME MANUFACTURING. Volume: 1 (2019) - 2019 • 206
Thermodynamics of grain boundary segregation, interfacial spinodal and their relevance for nucleation during solid-solid phase transitions
Kwiatkowski da Silva, A. and Kamachali, R.D. and Ponge, D. and Gault, B. and Neugebauer, J. and Raabe, D.
ACTA MATERIALIA. Volume: 168 (2019) - 2019 • 205
Studying grain boundary strengthening by dislocation-based strain gradient crystal plasticity coupled with a multi-phase-field model
Amin, W. and Ali, M.A. and Vajragupta, N. and Hartmaier, A.
MATERIALS. Volume: 12 (2019) - 2019 • 204
Real-time nanoscale observation of deformation mechanisms in CrCoNi-based medium- to high-entropy alloys at cryogenic temperatures
Ding, Q. and Fu, X. and Chen, D. and Bei, H. and Gludovatz, B. and Li, J. and Zhang, Z. and George, E.P. and Yu, Q. and Zhu, T. and Ritchie, R.O.
MATERIALS TODAY. Volume: 25 (2019) - 2019 • 203
On pinning-depinning and microkink-flow in solid state dewetting: Insights by in-situ ESEM on Al thin films
Hieke, S.W. and Willinger, M.-G. and Wang, Z.-J. and Richter, G. and Chatain, D. and Dehm, G. and Scheu, C.
ACTA MATERIALIA. Volume: 165 (2019) - 2019 • 202
Segregation-driven grain boundary spinodal decomposition as a pathway for phase nucleation in a high-entropy alloy
Li, L. and Li, Z. and Kwiatkowski da Silva, A. and Peng, Z. and Zhao, H. and Gault, B. and Raabe, D.
ACTA MATERIALIA. Volume: 178 (2019) - 2019 • 201
Partitioning of interstitial segregants during decohesion: A DFT case study of the ∑3 symmetric tilt grain boundary in ferritic steel
Huang, X. and Janisch, R.
MATERIALS. Volume: 12 (2019) - 2019 • 200
Atomic-scale investigation of hydrogen distribution in a Ti–Mo alloy
Yan, F. and Mouton, I. and Stephenson, L.T. and Breen, A.J. and Chang, Y. and Ponge, D. and Raabe, D. and Gault, B.
SCRIPTA MATERIALIA. Volume: 162 (2019) - 2019 • 199
Predicting grain boundary structure and energy in BCC metals by integrated atomistic and phase-field modeling
Qiu, D. and Zhao, P. and Shen, C. and Lu, W. and Zhang, D. and Mrovec, M. and Wang, Y.
ACTA MATERIALIA. Volume: 164 (2019) - 2019 • 198
Top-down fabrication and transformation properties of vanadium dioxide nanostructures
Rastjoo, S. and Wang, X. and Ludwig, Al. and Kohl, M.
JOURNAL OF APPLIED PHYSICS. Volume: 125 (2019) - 2019 • 197
Development of Multilayer Sinter Cladding of Cold Work Tool Steel on Hadfield Steel Plates for Wear-Resistant Applications
Farayibi, P.K. and Blüm, M. and Theisen, W. and Weber, S.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE. Volume: 28 (2019) - 2019 • 196
Evolution of porosity, crack density, and CMAS penetration in thermal barrier coatings subjected to burner rig testing
Mack, D.E. and Laquai, R. and Müller, B. and Helle, O. and Sebold, D. and Vaßen, R. and Bruno, G.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY. Volume: 102 (2019) - 2019 • 195
Synthesis and mechanical testing of grain boundaries at the micro and sub-micro scale
Malyar, N.V. and Springer, H. and Wichert, J. and Dehm, G. and Kirchlechner, C.
MATERIALPRUEFUNG/MATERIALS TESTING. Volume: 61 (2019) - 2019 • 194
Influence of Microstructural Features on the Strain Hardening Behavior of Additively Manufactured Metallic Components
Biswas, A. and Prasad, M.R.G. and Vajragupta, N. and ul Hassan, H. and Brenne, F. and Niendorf, T. and Hartmaier, A.
ADVANCED ENGINEERING MATERIALS. Volume: 21 (2019) - 2019 • 193
The brittle-to-ductile transition in cold rolled tungsten plates: Impact of crystallographic texture, grain size and dislocation density on the transition temperature
Bonnekoh, C. and Jäntsch, U. and Hoffmann, J. and Leiste, H. and Hartmaier, A. and Weygand, D. and Hoffmann, A. and Reiser, J.
INTERNATIONAL JOURNAL OF REFRACTORY METALS AND HARD MATERIALS. Volume: 78 (2019) - 2019 • 192
Initiation and stagnation of room temperature grain coarsening in cyclically strained gold films
Glushko, O. and Dehm, G.
ACTA MATERIALIA. Volume: 169 (2019) - 2018 • 191
Multiscale Characterization of Microstructure in Near-Surface Regions of a 16MnCr5 Gear Wheel After Cyclic Loading
Medghalchi, S. and Jamebozorgi, V. and Bala Krishnan, A. and Vincent, S. and Salomon, S. and Basir Parsa, A. and Pfetzing, J. and Kostka, A. and Li, Y. and Eggeler, G. and Li, T.
JOM. Volume: (2018) - 2018 • 190
Sulfur – induced embrittlement in high-purity, polycrystalline copper
Meiners, T. and Peng, Z. and Gault, B. and Liebscher, C.H. and Dehm, G.
ACTA MATERIALIA. Volume: 156 (2018) - 2018 • 189
Correlative transmission Kikuchi diffraction and atom probe tomography study of Cu(In,Ga)Se2 grain boundaries
Schwarz, T. and Stechmann, G. and Gault, B. and Cojocaru-Mirédin, O. and Wuerz, R. and Raabe, D.
PROGRESS IN PHOTOVOLTAICS: RESEARCH AND APPLICATIONS. Volume: 26 (2018) - 2018 • 188
Boron doped ultrastrong and ductile high-entropy alloys
Seol, J.B. and Bae, J.W. and Li, Z. and Chan Han, J. and Kim, J.G. and Raabe, D. and Kim, H.S.
ACTA MATERIALIA. Volume: 151 (2018) - 2018 • 187
Atomic scale analysis of grain boundary deuteride growth front in Zircaloy-4
Breen, A.J. and Mouton, I. and Lu, W. and Wang, S. and Szczepaniak, A. and Kontis, P. and Stephenson, L.T. and Chang, Y. and da Silva, A.K. and Liebscher, C.H. and Raabe, D. and Britton, T.B. and Herbig, M. and Gault, B.
SCRIPTA MATERIALIA. Volume: 156 (2018) - 2018 • 186
On the grain boundary strengthening effect of boron in γ/γ′ Cobalt-base superalloys
Kolb, M. and Freund, L.P. and Fischer, F. and Povstugar, I. and Makineni, S.K. and Gault, B. and Raabe, D. and Müller, J. and Spiecker, E. and Neumeier, S. and Göken, M.
ACTA MATERIALIA. Volume: 145 (2018) - 2018 • 185
Microstructural and mechanical characterization of an equiatomic YGdTbDyHo high entropy alloy with hexagonal close-packed structure
Soler, R. and Evirgen, A. and Yao, M. and Kirchlechner, C. and Stein, F. and Feuerbacher, M. and Raabe, D. and Dehm, G.
ACTA MATERIALIA. Volume: 156 (2018) - 2018 • 184
Segregation assisted grain boundary precipitation in a model Al-Zn-Mg-Cu alloy
Zhao, H. and De Geuser, F. and Kwiatkowski da Silva, A. and Szczepaniak, A. and Gault, B. and Ponge, D. and Raabe, D.
ACTA MATERIALIA. Volume: 156 (2018) - 2018 • 183
Phase-field modeling of pores and precipitates in polycrystalline systems
Kundin, J. and Sohaib, H. and Schiedung, R. and Steinbach, I.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING. Volume: 26 (2018) - 2018 • 182
Competition between formation of carbides and reversed austenite during tempering of a medium-manganese steel studied by thermodynamic-kinetic simulations and atom probe tomography
Kwiatkowski da Silva, A. and Inden, G. and Kumar, A. and Ponge, D. and Gault, B. and Raabe, D.
ACTA MATERIALIA. Volume: 147 (2018) - 2018 • 181
Characterizing solute hydrogen and hydrides in pure and alloyed titanium at the atomic scale
Chang, Y. and Breen, A.J. and Tarzimoghadam, Z. and Kürnsteiner, P. and Gardner, H. and Ackerman, A. and Radecka, A. and Bagot, P.A.J. and Lu, W. and Li, T. and Jägle, E.A. and Herbig, M. and Stephenson, L.T. and Moody, M.P. and Rugg, D. and Dye, D. and Ponge, D. and Raabe, D. and Gault, B.
ACTA MATERIALIA. Volume: 150 (2018) - 2018 • 180
Molecular statics simulation of CdTe grain boundary structures and energetics using a bond-order potential
Stechmann, G. and Zaefferer, S. and Raabe, D.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING. Volume: 26 (2018) - 2018 • 179
Hot cracking mechanism affecting a non-weldable Ni-based superalloy produced by selective electron Beam Melting
Chauvet, E. and Kontis, P. and Jägle, E.A. and Gault, B. and Raabe, D. and Tassin, C. and Blandin, J.-J. and Dendievel, R. and Vayre, B. and Abed, S. and Martin, G.
ACTA MATERIALIA. Volume: 142 (2018) - 2018 • 178
Precipitate-induced nonlinearities of diffusion along grain boundaries in Al-based alloys
Gupta, A. and Kulitcki, V. and Kavakbasi, B.T. and Buranova, Y. and Neugebauer, J. and Wilde, G. and Hickel, T. and Divinski, S.V.
PHYSICAL REVIEW MATERIALS. Volume: 2 (2018) - 2018 • 177
Segregation-Induced Nanofaceting Transition at an Asymmetric Tilt Grain Boundary in Copper
Peter, N.J. and Frolov, T. and Duarte, M.J. and Hadian, R. and Ophus, C. and Kirchlechner, C. and Liebscher, C.H. and Dehm, G.
PHYSICAL REVIEW LETTERS. Volume: 121 (2018) - 2018 • 176
Strain-Induced Asymmetric Line Segregation at Faceted Si Grain Boundaries
Liebscher, C.H. and Stoffers, A. and Alam, M. and Lymperakis, L. and Cojocaru-Mirédin, O. and Gault, B. and Neugebauer, J. and Dehm, G. and Scheu, C. and Raabe, D.
PHYSICAL REVIEW LETTERS. Volume: 121 (2018) - 2018 • 175
Overview on micro- and nanomechanical testing: New insights in interface plasticity and fracture at small length scales
Dehm, G. and Jaya, B.N. and Raghavan, R. and Kirchlechner, C.
ACTA MATERIALIA. Volume: 142 (2018) - 2018 • 174
An integrated crystal plasticity-phase field model for spatially resolved twin nucleation, propagation, and growth in hexagonal materials
Liu, C. and Shanthraj, P. and Diehl, M. and Roters, F. and Dong, S. and Dong, J. and Ding, W. and Raabe, D.
INTERNATIONAL JOURNAL OF PLASTICITY. Volume: 106 (2018) - 2018 • 173
Grain boundary-constrained reverse austenite transformation in nanostructured Fe alloy: Model and application
Huang, L. and Lin, W. and Wang, K. and Song, S. and Guo, C. and Chen, Y. and Li, Y. and Liu, F.
ACTA MATERIALIA. Volume: 154 (2018) - 2018 • 172
Grain boundaries in bcc-Fe: A density-functional theory and tight-binding study
Wang, J. and Madsen, G.K.H. and Drautz, R.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING. Volume: 26 (2018) - 2018 • 171
Analysis of hydrogen diffusion and trapping in ultra-high strength steel grades
Schaffner, T. and Hartmaier, A. and Kokotin, V. and Pohl, M.
JOURNAL OF ALLOYS AND COMPOUNDS. Volume: 746 (2018) - 2017 • 170
Stress intensity factor dependence on anisotropy and geometry during micro-fracture experiments
Brinckmann, S. and Kirchlechner, C. and Dehm, G.
SCRIPTA MATERIALIA. Volume: 127 (2017) - 2017 • 169
Pre- and post-buckling behavior of bi-crystalline micropillars: Origin and consequences
Kirchlechner, C. and Toth, F. and Rammerstorfer, F.G. and Fischer, F.D. and Dehm, G.
ACTA MATERIALIA. Volume: 124 (2017) - 2017 • 168
Nanostructure of and structural defects in a Mo2BC hard coating investigated by transmission electron microscopy and atom probe tomography
Gleich, S. and Fager, H. and Bolvardi, H. and Achenbach, J.-O. and Soler, R. and Pradeep, K.G. and Schneider, J.M. and Dehm, G. and Scheu, C.
JOURNAL OF APPLIED PHYSICS. Volume: 122 (2017) - 2017 • 167
Interfacial hydrogen localization in austenite/martensite dual-phase steel visualized through optimized silver decoration and scanning Kelvin probe force microscopy
Nagashima, T. and Koyama, M. and Bashir, A. and Rohwerder, M. and Tasan, C.C. and Akiyama, E. and Raabe, D. and Tsuzaki, K.
MATERIALS AND CORROSION. Volume: 68 (2017) - 2017 • 166
The effects of prior austenite grain boundaries and microstructural morphology on the impact toughness of intercritically annealed medium Mn steel
Han, J. and da Silva, A.K. and Ponge, D. and Raabe, D. and Lee, S.-M. and Lee, Y.-K. and Lee, S.-I. and Hwang, B.
ACTA MATERIALIA. Volume: 122 (2017) - 2017 • 165
High-throughput study of binary thin film tungsten alloys
Nikolić, V. and Wurster, S. and Savan, A. and Ludwig, Al. and Pippan, R.
INTERNATIONAL JOURNAL OF REFRACTORY METALS AND HARD MATERIALS. Volume: 69 (2017) - 2017 • 164
Stability, phase separation and oxidation of a supersaturated nanocrystalline Cu-33 at.% Cr thin film alloy
Harzer, T.P. and Dehm, G.
THIN SOLID FILMS. Volume: 623 (2017) - 2017 • 163
In–situ TEM study of diffusion kinetics and electron irradiation effects on the Cr phase separation of a nanocrystalline Cu–4 at.% Cr thin film alloy
Harzer, T.P. and Duarte, M.J. and Dehm, G.
JOURNAL OF ALLOYS AND COMPOUNDS. Volume: 695 (2017) - 2017 • 162
Elasto-viscoplastic phase field modelling of anisotropic cleavage fracture
Shanthraj, P. and Svendsen, B. and Sharma, L. and Roters, F. and Raabe, D.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS. Volume: 99 (2017) - 2017 • 161
Abnormal grain growth in Eurofer-97 steel in the ferrite phase field
Oliveira, V.B. and Sandim, H.R.Z. and Raabe, D.
JOURNAL OF NUCLEAR MATERIALS. Volume: 485 (2017) - 2017 • 160
Efficient sampling in materials simulation - Exploring the parameter space of grain boundaries
Dette, H. and Gösmann, J. and Greiff, C. and Janisch, R.
ACTA MATERIALIA. Volume: 125 (2017) - 2017 • 159
Microstructure and texture evolution during severe plastic deformation of CrMnFeCoNi high-entropy alloy
Skrotzki, W. and Pukenas, A. and Joni, B. and Odor, E. and Ungar, T. and Hohenwarter, A. and Pippan, R. and George, E.P.
IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING. Volume: 194 (2017) - 2017 • 158
Atomic scale characterization of white etching area and its adjacent matrix in a martensitic 100Cr6 bearing steel
Li, Y.J. and Herbig, M. and Goto, S. and Raabe, D.
MATERIALS CHARACTERIZATION. Volume: 123 (2017) - 2017 • 157
Atomic diffusion induced degradation in bimetallic layer coated cemented tungsten carbide
Peng, Z. and Rohwerder, M. and Choi, P.-P. and Gault, B. and Meiners, T. and Friedrichs, M. and Kreilkamp, H. and Klocke, F. and Raabe, D.
CORROSION SCIENCE. Volume: 120 (2017) - 2017 • 156
Microstructural evolution and solid state dewetting of epitaxial Al thin films on sapphire (α-Al2O3)
Hieke, S.W. and Breitbach, B. and Dehm, G. and Scheu, C.
ACTA MATERIALIA. Volume: 133 (2017) - 2017 • 155
A correlative investigation of grain boundary crystallography and electronic properties in CdTe thin film solar cells
Stechmann, G. and Zaefferer, S. and Schwarz, T. and Konijnenberg, P. and Raabe, D. and Gretener, C. and Kranz, L. and Perrenoud, J. and Buecheler, S. and Nath Tiwari, A.
SOLAR ENERGY MATERIALS AND SOLAR CELLS. Volume: 166 (2017) - 2017 • 154
Dislocation activities at the martensite phase transformation interface in metastable austenitic stainless steel: An in-situ TEM study
Liu, J. and Chen, C. and Feng, Q. and Fang, X. and Wang, H. and Liu, F. and Lu, J. and Raabe, D.
MATERIALS SCIENCE AND ENGINEERING A. Volume: 703 (2017) - 2017 • 153
Ab initio modelling of solute segregation energies to a general grain boundary
Huber, L. and Grabowski, B. and Militzer, M. and Neugebauer, J. and Rottler, J.
ACTA MATERIALIA. Volume: 132 (2017) - 2017 • 152
Modelling of grain boundary dynamics using amplitude equations
Hüter, C. and Neugebauer, J. and Boussinot, G. and Svendsen, B. and Prahl, U. and Spatschek, R.
CONTINUUM MECHANICS AND THERMODYNAMICS. Volume: 29 (2017) - 2017 • 151
Correlating Atom Probe Tomography with Atomic-Resolved Scanning Transmission Electron Microscopy: Example of Segregation at Silicon Grain Boundaries
Stoffers, A. and Barthel, J. and Liebscher, C.H. and Gault, B. and Cojocaru-Mirédin, O. and Scheu, C. and Raabe, D.
MICROSCOPY AND MICROANALYSIS. Volume: (2017) - 2017 • 150
Constitutive modeling of strain induced grain boundary migration via coupling crystal plasticity and phase-field methods
Jafari, M. and Jamshidian, M. and Ziaei-Rad, S. and Raabe, D. and Roters, F.
INTERNATIONAL JOURNAL OF PLASTICITY. Volume: 99 (2017) - 2017 • 149
1 billion tons of nanostructure - Segregation engineering enables confined transformation effects at lattice defects in steels
Raabe, D. and Ponge, D. and Wang, M.-M. and Herbig, M. and Belde, M. and Springer, H.
IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING. Volume: 219 (2017) - 2017 • 148
Strengthening Fe – TiB2 based high modulus steels by precipitations
Szczepaniak, A. and Springer, H. and Aparicio-Fernández, R. and Baron, C. and Raabe, D.
MATERIALS AND DESIGN. Volume: 124 (2017) - 2017 • 147
Fracture behavior of nanostructured heavily cold drawn pearlitic steel wires before and after annealing
Jaya, B.N. and Goto, S. and Richter, G. and Kirchlechner, C. and Dehm, G.
MATERIALS SCIENCE AND ENGINEERING A. Volume: 707 (2017) - 2017 • 146
Grain boundary character distribution in electroplated nanotwinned copper
Ratanaphan, S. and Raabe, D. and Sarochawikasit, R. and Olmsted, D.L. and Rohrer, G.S. and Tu, K.N.
JOURNAL OF MATERIALS SCIENCE. Volume: 52 (2017) - 2017 • 145
Hydrogen-assisted failure in Ni-based superalloy 718 studied under in situ hydrogen charging: The role of localized deformation in crack propagation
Tarzimoghadam, Z. and Ponge, D. and Klöwer, J. and Raabe, D.
ACTA MATERIALIA. Volume: 128 (2017) - 2017 • 144
Insights into the deformation behavior of the CrMnFeCoNi high-entropy alloy revealed by elevated temperature nanoindentation
Maier-Kiener, V. and Schuh, B. and George, E.P. and Clemens, H. and Hohenwarter, A.
JOURNAL OF MATERIALS RESEARCH. Volume: 32 (2017) - 2017 • 143
Size effect in bi-crystalline micropillars with a penetrable high angle grain boundary
Malyar, N.V. and Micha, J.S. and Dehm, G. and Kirchlechner, C.
ACTA MATERIALIA. Volume: 129 (2017) - 2017 • 142
Strain rate dependence of the slip transfer through a penetrable high angle grain boundary in copper
Malyar, N.V. and Dehm, G. and Kirchlechner, C.
SCRIPTA MATERIALIA. Volume: 138 (2017) - 2017 • 141
The shear instability energy: A new parameter for materials design?
Kanani, M. and Hartmaier, A. and Janisch, R.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING. Volume: 25 (2017) - 2017 • 140
Hydrogen behaviour at twist {110} grain boundaries in α-Fe
McEniry, E.J. and Hickel, T. and Neugebauer, J.
PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A: MATHEMATICAL, PHYSICAL AND ENGINEERING SCIENCES. Volume: 375 (2017) - 2016 • 139
On the origin of creep dislocations in a Ni-base, single-crystal superalloy: An ECCI, EBSD, and dislocation dynamics-based study
Ram, F. and Li, Z. and Zaefferer, S. and Hafez Haghighat, S.M. and Zhu, Z. and Raabe, D. and Reed, R.C.
ACTA MATERIALIA. Volume: 109 (2016) - 2016 • 138
Stacking fault based analysis of shear mechanisms at interfaces in lamellar TiAl alloys
Kanani, M. and Hartmaier, A. and Janisch, R.
ACTA MATERIALIA. Volume: 106 (2016) - 2016 • 137
Growth of bainitic ferrite and carbon partitioning during the early stages of bainite transformation in a 2 mass% silicon steel studied by in situ neutron diffraction, TEM and APT
Timokhina, I.B. and Liss, K.D. and Raabe, D. and Rakha, K. and Beladi, H. and Xiong, X.Y. and Hodgson, P.D.
JOURNAL OF APPLIED CRYSTALLOGRAPHY. Volume: 49 (2016) - 2016 • 136
Ab Initio Study of Deformation Influence on the Electronic Properties of Graphene Structures Containing One-Dimensional Topological Defects
Valishina, A.A. and Lysogorskiy, Y.V. and Nedopekin, O.V. and Tayurskii, D.A.
JOURNAL OF LOW TEMPERATURE PHYSICS. Volume: 185 (2016) - 2016 • 135
Microstructure design of tempered martensite by atomistically informed full-field simulation: From quenching to fracture
Borukhovich, E. and Du, G. and Stratmann, M. and Boeff, M. and Shchyglo, O. and Hartmaier, A. and Steinbach, I.
MATERIALS. Volume: 9 (2016) - 2016 • 134
First-principles study of carbon segregation in bcc iron symmetrical tilt grain boundaries
Wang, J. and Janisch, R. and Madsen, G.K.H. and Drautz, R.
ACTA MATERIALIA. Volume: 115 (2016) - 2016 • 133
Low cycle fatigue in aluminum single and bi-crystals: On the influence of crystal orientation
Nellessen, J. and Sandlöbes, S. and Raabe, D.
MATERIALS SCIENCE AND ENGINEERING A. Volume: 668 (2016) - 2016 • 132
Phase-field study of zener drag and pinning of cylindrical particles in polycrystalline materials
Schwarze, C. and Darvishi Kamachali, R. and Steinbach, I.
ACTA MATERIALIA. Volume: 106 (2016) - 2016 • 131
Atomistic migration mechanisms of atomically flat, stepped, and kinked grain boundaries
Hadian, R. and Grabowski, B. and Race, C.P. and Neugebauer, J.
PHYSICAL REVIEW B - CONDENSED MATTER AND MATERIALS PHYSICS. Volume: 94 (2016) - 2016 • 130
Autonomous Filling of Grain-Boundary Cavities during Creep Loading in Fe-Mo Alloys
Zhang, S. and Fang, H. and Gramsma, M.E. and Kwakernaak, C. and Sloof, W.G. and Tichelaar, F.D. and Kuzmina, M. and Herbig, M. and Raabe, D. and Brück, E. and van der Zwaag, S. and van Dijk, N.H.
METALLURGICAL AND MATERIALS TRANSACTIONS A: PHYSICAL METALLURGY AND MATERIALS SCIENCE. Volume: 47 (2016) - 2016 • 129
Decomposition of the single-phase high-entropy alloy CrMnFeCoNi after prolonged anneals at intermediate temperatures
Otto, F. and Dlouhý, A. and Pradeep, K.G. and Kuběnová, M. and Raabe, D. and Eggeler, G. and George, E.P.
ACTA MATERIALIA. Volume: 112 (2016) - 2016 • 128
Formation of nanosized grain structure in martensitic 100Cr6 bearing steels upon rolling contact loading studied by atom probe tomography
Li, Y.J. and Herbig, M. and Goto, S. and Raabe, D.
MATERIALS SCIENCE AND TECHNOLOGY (UNITED KINGDOM). Volume: 32 (2016) - 2016 • 127
The impact of carbon and oxygen in alpha-titanium: Ab initio study of solution enthalpies and grain boundary segregation
Aksyonov, D.A. and Hickel, T. and Neugebauer, J. and Lipnitskii, A.G.
JOURNAL OF PHYSICS CONDENSED MATTER. Volume: 28 (2016) - 2016 • 126
Beam-induced atomic migration at Ag-containing nanofacets at an asymmetric Cu grain boundary
Peter, N.J. and Liebscher, C.H. and Kirchlechner, C. and Dehm, G.
JOURNAL OF MATERIALS RESEARCH. Volume: 32 (2016) - 2016 • 125
3-Dimensional microstructural characterization of CdTe absorber layers from CdTe/CdS thin film solar cells
Stechmann, G. and Zaefferer, S. and Konijnenberg, P. and Raabe, D. and Gretener, C. and Kranz, L. and Perrenoud, J. and Buecheler, S. and Tiwari, A.N.
SOLAR ENERGY MATERIALS AND SOLAR CELLS. Volume: 151 (2016) - 2016 • 124
Atom probe tomography of metallic nanostructures
Hono, K. and Raabe, D. and Ringer, S.P. and Seidman, D.N.
MRS BULLETIN. Volume: 41 (2016) - 2016 • 123
A QM/MM approach for low-symmetry defects in metals
Huber, L. and Grabowski, B. and Militzer, M. and Neugebauer, J. and Rottler, J.
COMPUTATIONAL MATERIALS SCIENCE. Volume: 118 (2016) - 2016 • 122
On slip transmission and grain boundary yielding
Stricker, M. and Gagel, J. and Schmitt, S. and Schulz, K. and Weygand, D. and Gumbsch, P.
MECCANICA. Volume: 51 (2016) - 2015 • 121
In Situ TEM Microcompression of Single and Bicrystalline Samples: Insights and Limitations
Imrich, P.J. and Kirchlechner, C. and Kiener, D. and Dehm, G.
JOM. Volume: 67 (2015) - 2015 • 120
Complex Nanotwin Substructure of an Asymmetric Σ9 Tilt Grain Boundary in a Silicon Polycrystal
Stoffers, A. and Ziebarth, B. and Barthel, J. and Cojocaru-Mirédin, O. and Elsässer, C. and Raabe, D.
PHYSICAL REVIEW LETTERS. Volume: 115 (2015) - 2015 • 119
Interstitial iron impurities at grain boundaries in silicon: A first-principles study
Ziebarth, B. and Mrovec, M. and Elsässer, C. and Gumbsch, P.
PHYSICAL REVIEW B - CONDENSED MATTER AND MATERIALS PHYSICS. Volume: 91 (2015) - 2015 • 118
Influence of inclined twin boundaries on the deformation behavior of Cu micropillars
Imrich, P.J. and Kirchlechner, C. and Dehm, G.
MATERIALS SCIENCE AND ENGINEERING A. Volume: 642 (2015) - 2015 • 117
Grain boundary segregation in multicrystalline silicon: Correlative characterization by EBSD, EBIC, and atom probe tomography
Stoffers, A. and Cojocaru-Mirédin, O. and Seifert, W. and Zaefferer, S. and Riepe, S. and Raabe, D.
PROGRESS IN PHOTOVOLTAICS: RESEARCH AND APPLICATIONS. Volume: 23 (2015) - 2015 • 116
A first principles investigation of zinc induced embrittlement at grain boundaries in bcc iron
Bauer, K.-D. and Todorova, M. and Hingerl, K. and Neugebauer, J.
ACTA MATERIALIA. Volume: 90 (2015) - 2015 • 115
Equivalent plastic strain gradient plasticity with grain boundary hardening and comparison to discrete dislocation dynamics
Bayerschen, E. and Stricker, M. and Wulfinghoff, S. and Weygand, D. and Böhlke, T.
PROCEEDINGS OF THE ROYAL SOCIETY A: MATHEMATICAL, PHYSICAL AND ENGINEERING SCIENCES. Volume: 471 (2015) - 2015 • 114
Mechanisms and kinetics of the migration of grain boundaries containing extended defects
Race, C.P. and Hadian, R. and Von Pezold, J. and Grabowski, B. and Neugebauer, J.
PHYSICAL REVIEW B - CONDENSED MATTER AND MATERIALS PHYSICS. Volume: 92 (2015) - 2015 • 113
From wetting to melting along grain boundaries using phase field and sharp interface methods
Sai Pavan Kumar Bhogireddy, V. and Hüter, C. and Neugebauer, J. and Shchyglo, O. and Steinbach, I. and Spatschek, R.
COMPUTATIONAL MATERIALS SCIENCE. Volume: 108 (2015) - 2015 • 112
The role of grain boundaries in the initial oxidation behavior of austenitic stainless steel containing alloyed Cu at 700°C for advanced thermal power plant applications
Kim, J.-H. and Kim, B.K. and Kim, D.-I. and Choi, P.-P. and Raabe, D. and Yi, K.-W.
CORROSION SCIENCE. Volume: 96 (2015) - 2015 • 111
Thermal dissolution mechanisms of AlN/CrN hard coating superlattices studied by atom probe tomography and transmission electron microscopy
Tytko, D. and Choi, P.-P. and Raabe, D.
ACTA MATERIALIA. Volume: 85 (2015) - 2015 • 110
Assessment of geometrically necessary dislocation levels derived by 3D EBSD
Konijnenberg, P.J. and Zaefferer, S. and Raabe, D.
ACTA MATERIALIA. Volume: 99 (2015) - 2015 • 109
Damage evolution in pseudoelastic polycrystalline Co-Ni-Ga high-temperature shape memory alloys
Vollmer, M. and Krooß, P. and Segel, C. and Weidner, A. and Paulsen, A. and Frenzel, J. and Schaper, M. and Eggeler, G. and Maier, H.J. and Niendorf, T.
JOURNAL OF ALLOYS AND COMPOUNDS. Volume: 633 (2015) - 2015 • 108
Mechanical properties, microstructure and thermal stability of a nanocrystalline CoCrFeMnNi high-entropy alloy after severe plastic deformation
Schuh, B. and Mendez-Martin, F. and Völker, B. and George, E.P. and Clemens, H. and Pippan, R. and Hohenwarter, A.
ACTA MATERIALIA. Volume: 96 (2015) - 2015 • 107
Cyclic degradation of titanium-tantalum high-temperature shape memory alloys - The role of dislocation activity and chemical decomposition
Niendorf, T. and Krooß, P. and Somsen, C. and Rynko, R. and Paulsen, A. and Batyrshina, E. and Frenzel, J. and Eggeler, G. and Maier, H.J.
FUNCTIONAL MATERIALS LETTERS. Volume: 8 (2015) - 2015 • 106
Atom probe tomography study of internal interfaces in Cu2 ZnSnSe4 thin-films
Schwarz, T. and Cojocaru-Mirédin, O. and Choi, P. and Mousel, M. and Redinger, A. and Siebentritt, S. and Raabe, D.
JOURNAL OF APPLIED PHYSICS. Volume: 118 (2015) - 2015 • 105
Grain boundary segregation engineering and austenite reversion turn embrittlement into toughness: Example of a 9 wt.% medium Mn steel
Kuzmina, M. and Ponge, D. and Raabe, D.
ACTA MATERIALIA. Volume: 86 (2015) - 2015 • 104
Hydrogen diffusion and segregation in α iron ∑ 3 (111) grain boundaries
Hamza, M. and Hatem, T.M. and Raabe, D. and El-Awady, J.A.
ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, PROCEEDINGS (IMECE). Volume: 9-2015 (2015) - 2015 • 103
Multiferroic grain boundaries in oxygen-deficient ferroelectric lead titanate
Shimada, T. and Wang, J. and Ueda, T. and Uratani, Y. and Arisue, K. and Mrovec, M. and Elsä Sser, C. and Kitamura, T.
NANO LETTERS. Volume: 15 (2015) - 2015 • 102
Interplanar potential for tension-shear coupling at grain boundaries derived from ab initio calculations
Pang, X.Y. and Janisch, R. and Hartmaier, A.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING. Volume: 24 (2015) - 2015 • 101
First-principles investigation of hydrogen trapping and diffusion at grain boundaries in nickel
Di Stefano, D. and Mrovec, M. and Elsässer, C.
ACTA MATERIALIA. Volume: 98 (2015) - 2015 • 100
Atomic scale investigation of non-equilibrium segregation of boron in a quenched Mo-free martensitic steel
Li, Y.J. and Ponge, D. and Choi, P. and Raabe, D.
ULTRAMICROSCOPY. Volume: 159 (2015) - 2015 • 99
Combining structural and chemical information at the nanometer scale by correlative transmission electron microscopy and atom probe tomography
Herbig, M. and Choi, P. and Raabe, D.
ULTRAMICROSCOPY. Volume: 153 (2015) - 2015 • 98
Segregation of boron at prior austenite grain boundaries in a quenched martensitic steel studied by atom probe tomography
Li, Y.J. and Ponge, D. and Choi, P. and Raabe, D.
SCRIPTA MATERIALIA. Volume: 96 (2015) - 2015 • 97
Grain boundary segregation in Fe-Mn-C twinning-induced plasticity steels studied by correlative electron backscatter diffraction and atom probe tomography
Herbig, M. and Kuzmina, M. and Haase, C. and Marceau, R.K.W. and Gutierrez-Urrutia, I. and Haley, D. and Molodov, D.A. and Choi, P. and Raabe, D.
ACTA MATERIALIA. Volume: 83 (2015) - 2015 • 96
Heterogeneous crystallization of the phase change material GeTe via atomistic simulations
Sosso, G.C. and Salvalaglio, M. and Behler, J. and Bernasconi, M. and Parrinello, M.
JOURNAL OF PHYSICAL CHEMISTRY C. Volume: 119 (2015) - 2015 • 95
Atomistic investigation of wear mechanisms of a copper bi-crystal
Zhang, J. and Begau, C. and Geng, L. and Hartmaier, A.
WEAR. Volume: 332-333 (2015) - 2015 • 94
Effects of boron on the fracture behavior and ductility of cast Ti-6Al-4V alloys
Luan, J.H. and Jiao, Z.B. and Heatherly, L. and George, E.P. and Chen, G. and Liu, C.T.
SCRIPTA MATERIALIA. Volume: 100 (2015) - 2015 • 93
Autonomous Repair Mechanism of Creep Damage in Fe-Au and Fe-Au-B-N Alloys
Zhang, S. and Kwakernaak, C. and Tichelaar, F.D. and Sloof, W.G. and Kuzmina, M. and Herbig, M. and Raabe, D. and Brück, E. and van der Zwaag, S. and van Dijk, N.H.
METALLURGICAL AND MATERIALS TRANSACTIONS A: PHYSICAL METALLURGY AND MATERIALS SCIENCE. Volume: 46 (2015) - 2014 • 92
In situ observation of collective grain-scale mechanics in Mg and Mg-rare earth alloys
Wang, F. and Sandlöbes, S. and Diehl, M. and Sharma, L. and Roters, F. and Raabe, D.
ACTA MATERIALIA. Volume: 80 (2014) - 2014 • 91
Parameterized electronic description of carbon cohesion in iron grain boundaries
Hatcher, N. and Madsen, G.K.H. and Drautz, R.
JOURNAL OF PHYSICS CONDENSED MATTER. Volume: 26 (2014) - 2014 • 90
Sigma phase evolution in Co-Re-Cr-based alloys at 1100 C
Depka, T. and Somsen, C. and Eggeler, G. and Mukherji, D. and Rösler, J.
INTERMETALLICS. Volume: 48 (2014) - 2014 • 89
Temperature dependent transition of intragranular plastic to intergranular brittle failure in electrodeposited Cu micro-tensile samples
Wimmer, A. and Smolka, M. and Heinz, W. and Detzel, T. and Robl, W. and Motz, C. and Eyert, V. and Wimmer, E. and Jahnel, F. and Treichler, R. and Dehm, G.
MATERIALS SCIENCE AND ENGINEERING A. Volume: 618 (2014) - 2014 • 88
Atomic-scale quantification of grain boundary segregation in nanocrystalline material
Herbig, M. and Raabe, D. and Li, Y.J. and Choi, P. and Zaefferer, S. and Goto, S.
PHYSICAL REVIEW LETTERS. Volume: 112 (2014) - 2014 • 87
Ab initio based understanding of the segregation and diffusion mechanisms of hydrogen in steels
Hickel, T. and Nazarov, R. and McEniry, E.J. and Leyson, G. and Grabowski, B. and Neugebauer, J.
JOM. Volume: 66 (2014) - 2014 • 86
Precipitation of the α-phase in an ultrafine grained beta-titanium alloy processed by severe plastic deformation
Li, T. and Kent, D. and Sha, G. and Dargusch, M.S. and Cairney, J.M.
MATERIALS SCIENCE AND ENGINEERING A. Volume: 605 (2014) - 2014 • 85
Segregation stabilizes nanocrystalline bulk steel with near theoretical strength
Li, Y. and Raabe, D. and Herbig, M. and Choi, P.-P. and Goto, S. and Kostka, A. and Yarita, H. and Borchers, C. and Kirchheim, R.
PHYSICAL REVIEW LETTERS. Volume: 113 (2014) - 2014 • 84
Superplastic Mn-Si-Cr-C duplex and triplex steels: Interaction of microstructure and void formation
Zhang, H. and Ponge, D. and Raabe, D.
MATERIALS SCIENCE AND ENGINEERING A. Volume: 610 (2014) - 2014 • 83
Influence of short-range forces on melting along grain boundaries
Hüter, C. and Twiste, F. and Brener, E.A. and Neugebauer, J. and Spatschek, R.
PHYSICAL REVIEW B - CONDENSED MATTER AND MATERIALS PHYSICS. Volume: 89 (2014) - 2014 • 82
Scale bridging between atomistic and mesoscale modelling: Applications of amplitude equation descriptions
Hüter, C. and Nguyen, C.-D. and Spatschek, R. and Neugebauer, J.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING. Volume: 22 (2014) - 2014 • 81
Grain boundary characterization in multicrystalline silicon using joint EBSD, EBIC, and atom probe tomography
Stoffers, A. and Cojocaru-Miredin, O. and Breitenstein, O. and Seifert, W. and Zaefferer, S. and Raabe, D.
2014 IEEE 40TH PHOTOVOLTAIC SPECIALIST CONFERENCE (PVSC). Volume: (2014) - 2014 • 80
Differences in deformation behavior of bicrystalline Cu micropillars containing a twin boundary or a large-angle grain boundary
Imrich, P.J. and Kirchlechner, C. and Motz, C. and Dehm, G.
ACTA MATERIALIA. Volume: 73 (2014) - 2014 • 79
Grain boundary segregation engineering in metallic alloys: A pathway to the design of interfaces
Raabe, D. and Herbig, M. and Sandlöbes, S. and Li, Y. and Tytko, D. and Kuzmina, M. and Ponge, D. and Choi, P.-P.
CURRENT OPINION IN SOLID STATE AND MATERIALS SCIENCE. Volume: 18 (2014) - 2014 • 78
Role of the mesoscale in migration kinetics of flat grain boundaries
Race, C.P. and Von Pezold, J. and Neugebauer, J.
PHYSICAL REVIEW B - CONDENSED MATTER AND MATERIALS PHYSICS. Volume: 89 (2014) - 2014 • 77
On the influence of isotropic and kinematic hardening caused by strain gradients on the deformation behaviour of polycrystals
Ma, A. and Hartmaier, A.
PHILOSOPHICAL MAGAZINE. Volume: 94 (2014) - 2014 • 76
Growth mechanism of Al2Cu precipitates during in situ TEM heating of a HPT deformed Al-3wt.%Cu alloy
Rashkova, B. and Faller, M. and Pippan, R. and Dehm, G.
JOURNAL OF ALLOYS AND COMPOUNDS. Volume: 600 (2014) - 2014 • 75
Phase-field modeling of grain-boundary premelting using obstacle potentials
Bhogireddy, V.S.P.K. and Hüter, C. and Neugebauer, J. and Steinbach, I. and Karma, A. and Spatschek, R.
PHYSICAL REVIEW E - STATISTICAL, NONLINEAR, AND SOFT MATTER PHYSICS. Volume: 90 (2014) - 2014 • 74
A novel approach to measure grain boundary segregation in bulk polycrystalline materials in dependence of the boundaries' five rotational degrees of freedom
Mandal, S. and Pradeep, K.G. and Zaefferer, S. and Raabe, D.
SCRIPTA MATERIALIA. Volume: 81 (2014) - 2014 • 73
Hydrogen embrittlement of a carbon segregated σ5 (310) [001] symmetrical tilt grain boundary in α-Fe
Tahir, A.M. and Janisch, R. and Hartmaier, A.
MATERIALS SCIENCE AND ENGINEERING A. Volume: 612 (2014) - 2014 • 72
Effect of strain rate on twinning in a Zr alloy
Kapoor, R. and Sarkar, A. and Singh, J. and Samajdar, I. and Raabe, D.
SCRIPTA MATERIALIA. Volume: 74 (2014) - 2014 • 71
Phase-field modeling for 3D grain growth based on a grain boundary energy database
Kim, H.-K. and Kim, S.G. and Dong, W. and Steinbach, I. and Lee, B.-J.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING. Volume: 22 (2014) - 2014 • 70
Influence of formation and coarsening of the laves phase on the mechanical properties of heat-resistant ferritic steels
Klein, S. and Nabiran, N. and Weber, S. and Theisen, W.
STEEL RESEARCH INTERNATIONAL. Volume: 85 (2014) - 2014 • 69
Micromechanical investigations and modelling of a Copper-Antimony-Alloy under creep conditions
Vöse, M. and Otto, F. and Fedelich, B. and Eggeler, G.
MECHANICS OF MATERIALS. Volume: 69 (2014) - 2014 • 68
Hydrogen embrittlement associated with strain localization in a precipitation-hardened Fe-Mn-Al-C light weight austenitic steel
Koyama, M. and Springer, H. and Merzlikin, S.V. and Tsuzaki, K. and Akiyama, E. and Raabe, D.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY. Volume: 39 (2014) - 2013 • 67
Hydrogen-assisted failure in a twinning-induced plasticity steel studied under in situ hydrogen charging by electron channeling contrast imaging
Koyama, M. and Akiyama, E. and Tsuzaki, K. and Raabe, D.
ACTA MATERIALIA. Volume: 61 (2013) - 2013 • 66
A variational approach to grooving and wetting
Hackl, K. and Fischer, F.D. and Klevakina, K. and Renner, J. and Svoboda, J.
ACTA MATERIALIA. Volume: 61 (2013) - 2013 • 65
Interface-directed spinodal decomposition in TiAlN/CrN multilayer hard coatings studied by atom probe tomography
Povstugar, I. and Choi, P.-P. and Tytko, D. and Ahn, J.-P. and Raabe, D.
ACTA MATERIALIA. Volume: 61 (2013) - 2013 • 64
Atomic-scale compositional characterization of a nanocrystalline AlCrCuFeNiZn high-entropy alloy using atom probe tomography
Pradeep, K.G. and Wanderka, N. and Choi, P. and Banhart, J. and Murty, B.S. and Raabe, D.
ACTA MATERIALIA. Volume: 61 (2013) - 2013 • 63
Atomic scale investigation of redistribution of alloying elements in pearlitic steel wires upon cold-drawing and annealing
Li, Y.J. and Choi, P. and Goto, S. and Borchers, C. and Raabe, D. and Kirchheim, R.
ULTRAMICROSCOPY. Volume: 132 (2013) - 2013 • 62
Segregation engineering enables nanoscale martensite to austenite phase transformation at grain boundaries: A pathway to ductile martensite
Raabe, D. and Sandlöbes, S. and Millán, J. and Ponge, D. and Assadi, H. and Herbig, M. and Choi, P.-P.
ACTA MATERIALIA. Volume: 61 (2013) - 2013 • 61
Nanocrystalline Fe-C alloys produced by ball milling of iron and graphite
Chen, Y.Z. and Herz, A. and Li, Y.J. and Borchers, C. and Choi, P. and Raabe, D. and Kirchheim, R.
ACTA MATERIALIA. Volume: 61 (2013) - 2013 • 60
Ab initio calculation of traction separation laws for a grain boundary in molybdenum with segregated C impurites
Tahir, A.M. and Janisch, R. and Hartmaier, A.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING. Volume: 21 (2013) - 2013 • 59
Atom Probe Tomography Studies on the Cu(In,Ga)Se-2 Grain Boundaries
Cojocaru-Miredin, O. and Schwarz, T. and Choi, P. P. and Herbig, M. and Wuerz, R. and Raabe, D.
JOVE-JOURNAL OF VISUALIZED EXPERIMENTS. Volume: (2013) - 2013 • 58
Grain boundary segregation in a bronze-route Nb3Sn superconducting wire studied by atom probe tomography
Sandim, M.J.R. and Tytko, D. and Kostka, A. and Choi, P. and Awaji, S. and Watanabe, K. and Raabe, D.
SUPERCONDUCTOR SCIENCE AND TECHNOLOGY. Volume: 26 (2013) - 2013 • 57
Compressive behavior of Ti3AlC2 and Ti 3Al0.8Sn0.2C2 MAX phases at room temperature
Bei, G.-P. and Laplanche, G. and Gauthier-Brunet, V. and Bonneville, J. and Dubois, S.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY. Volume: 96 (2013) - 2012 • 56
Grain size effect on strain hardening in twinning-induced plasticity steels
Gutierrez-Urrutia, I. and Raabe, D.
SCRIPTA MATERIALIA. Volume: 66 (2012) - 2012 • 55
On the effect of manganese on grain size stability and hardenability in ultrafine-grained ferrite/martensite dual-phase steels
Calcagnotto, M. and Ponge, D. and Raabe, D.
METALLURGICAL AND MATERIALS TRANSACTIONS A: PHYSICAL METALLURGY AND MATERIALS SCIENCE. Volume: 43 (2012) - 2012 • 54
Influence of impurity elements on the nucleation and growth of Si in high purity melt-spun Al-Si-based alloys
Li, J.H. and Zarif, M.Z. and Dehm, G. and Schumacher, P.
PHILOSOPHICAL MAGAZINE. Volume: 92 (2012) - 2012 • 53
Characterization of oxidation and reduction of Pt-Ru and Pt-Rh-Ru alloys by atom probe tomography and comparison with Pt-Rh
Li, T. and Bagot, P.A.J. and Marquis, E.A. and Tsang, S.C.E. and Smith, G.D.W.
JOURNAL OF PHYSICAL CHEMISTRY C. Volume: 116 (2012) - 2012 • 52
Evolution of strength and microstructure during annealing of heavily cold-drawn 6.3 GPa hypereutectoid pearlitic steel wire
Li, Y.J. and Choi, P. and Goto, S. and Borchers, C. and Raabe, D. and Kirchheim, R.
ACTA MATERIALIA. Volume: 60 (2012) - 2012 • 51
Simulation of dislocation penetration through a general low-angle grain boundary
Liu, B. and Eisenlohr, P. and Roters, F. and Raabe, D.
ACTA MATERIALIA. Volume: 60 (2012) - 2012 • 50
Exploring the p-n junction region in Cu(In,Ga)Se 2 thin-film solar cells at the nanometer-scale
Cojocaru-Mirédin, O. and Choi, P. and Wuerz, R. and Raabe, D.
APPLIED PHYSICS LETTERS. Volume: 101 (2012) - 2012 • 49
Component interactions after long-term operation of an SOFC stack with LSM cathode
Malzbender, J. and Batfalsky, P. and Vaßen, R. and Shemet, V. and Tietz, F.
JOURNAL OF POWER SOURCES. Volume: 201 (2012) - 2012 • 48
Microstructural evolution of a Ni-based superalloy (617B) at 700 °c studied by electron microscopy and atom probe tomography
Tytko, D. and Choi, P.-P. and Klöwer, J. and Kostka, A. and Inden, G. and Raabe, D.
ACTA MATERIALIA. Volume: 60 (2012) - 2012 • 47
Grain structure and irreversibility line of a bronze route CuNb reinforced NbNb3Sn multifilamentary wire
Sandim, M.J.R. and Stamopoulos, D. and Aristomenopoulou, E. and Zaefferer, S. and Raabe, D. and Awaji, S. and Watanabe, K.
PHYSICS PROCEDIA. Volume: 36 (2012) - 2012 • 46
Modelling the kinetics of a triple junction
Fischer, F.D. and Svoboda, J. and Hackl, K.
ACTA MATERIALIA. Volume: 60 (2012) - 2012 • 45
Influence of grain boundary mobility on microstructure evolution during recrystallisation
Winning, M. and Raabe, D.
MATERIALS SCIENCE FORUM. Volume: 715-716 (2012) - 2012 • 44
Dislocation engineering and its effect on the oxidation behaviour
Naraparaju, R. and Christ, H.-J. and Renner, F.U. and Kostka, A.
MATERIALS AT HIGH TEMPERATURES. Volume: 29 (2012) - 2012 • 43
Yield stress influenced by the ratio of wire diameter to grain size - A competition between the effects of specimen microstructure and dimension in micro-sized polycrystalline copper wires
Yang, B. and Motz, C. and Rester, M. and Dehm, G.
PHILOSOPHICAL MAGAZINE. Volume: 92 (2012) - 2012 • 42
Nanoscale austenite reversion through partitioning, segregation and kinetic freezing: Example of a ductile 2 GPa Fe-Cr-C steel
Yuan, L. and Ponge, D. and Wittig, J. and Choi, P. and Jiménez, J.A. and Raabe, D.
ACTA MATERIALIA. Volume: 60 (2012) - 2012 • 41
Advanced methods and tools for reconstruction and analysis of grain boundaries from 3D-EBSD data sets
Konijnenberg, P.J. and Zaefferer, S. and Lee, S.-B. and Rollett, A.D. and Rohrer, G.S. and Raabe, D.
MATERIALS SCIENCE FORUM. Volume: 702-703 (2012) - 2012 • 40
Hydrogen-induced cracking at grain and twin boundaries in an Fe-Mn-C austenitic steel
Koyama, M. and Akiyama, E. and Sawaguchi, T. and Raabe, D. and Tsuzaki, K.
SCRIPTA MATERIALIA. Volume: 66 (2012) - 2012 • 39
On the effect of grain boundary segregation on creep and creep rupture
Otto, F. and Viswanathan, G.B. and Payton, E.J. and Frenzel, J. and Eggeler, G.
ACTA MATERIALIA. Volume: 60 (2012) - 2012 • 38
The effectiveness of coincidence site lattice criteria in predicting creep cavitation resistance
Otto, F. and Payton, E.J. and Frenzel, J. and Eggeler, G.
JOURNAL OF MATERIALS SCIENCE. Volume: 47 (2012) - 2012 • 37
The mechanical shear behavior of Al single crystals and grain boundaries
Pang, X. and Ahmed, N. and Janisch, R. and Hartmaier, A.
JOURNAL OF APPLIED PHYSICS. Volume: 112 (2012) - 2011 • 36
First-principles study on the interaction of H interstitials with grain boundaries in α- and γ-Fe
Du, Y.A. and Ismer, L. and Rogal, J. and Hickel, T. and Neugebauer, J. and Drautz, R.
PHYSICAL REVIEW B - CONDENSED MATTER AND MATERIALS PHYSICS. Volume: 84 (2011) - 2011 • 35
Electrical properties and structure of grain boundaries in n-conducting BaTiO3 ceramics
Hou, J. and Zhang, Z. and Preis, W. and Sitte, W. and Dehm, G.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY. Volume: 31 (2011) - 2011 • 34
Solubility of carbon in α-iron under volumetric strain and close to the Σ5(3 1 0)[0 0 1] grain boundary: Comparison of DFT and empirical potential methods
Hristova, E. and Janisch, R. and Drautz, R. and Hartmaier, A.
COMPUTATIONAL MATERIALS SCIENCE. Volume: 50 (2011) - 2011 • 33
SIMS study on the surface chemistry of stainless steel AISI 304 cylindrical tensile test samples showing hydrogen embrittlement
Izawa, C. and Wagner, S. and Martin, M. and Weber, S. and Bourgeon, A. and Pargeter, R. and Michler, T. and Pundt, A.
JOURNAL OF ALLOYS AND COMPOUNDS. Volume: 509 (2011) - 2011 • 32
Grain boundary electrochemistry of β-type Nb-Ti alloy using a scanning droplet cell
Woldemedhin, M.T. and Raabe, D. and Hassel, A.W.
PHYSICA STATUS SOLIDI (A) APPLICATIONS AND MATERIALS SCIENCE. Volume: 208 (2011) - 2011 • 31
Effect of shot-peening on the oxidation behaviour of boiler steels
Naraparaju, R. and Christ, H.-J. and Renner, F.U. and Kostka, A.
OXIDATION OF METALS. Volume: 76 (2011) - 2011 • 30
Recrystallization and grain growth in ultrafine-grained materials produced by high pressure torsion
Khorashadizadeh, A. and Raabe, D. and Winning, M. and Pippan, R.
ADVANCED ENGINEERING MATERIALS. Volume: 13 (2011) - 2011 • 29
Five-parameter grain boundary analysis by 3D EBSD of an ultra fine grained CuZr alloy processed by equal channel angular pressing
Khorashadizadeh, A. and Raabe, D. and Zaefferer, S. and Rohrer, G.S. and Rollett, A.D. and Winning, M.
ADVANCED ENGINEERING MATERIALS. Volume: 13 (2011) - 2011 • 28
Superplastic martensitic Mn-Si-Cr-C steel with 900% elongation
Zhang, H. and Bai, B. and Raabe, D.
ACTA MATERIALIA. Volume: 59 (2011) - 2011 • 27
On the influence of small quantities of Bi and Sb on the evolution of microstructure during swaging and heat treatments in copper
Otto, F. and Frenzel, J. and Eggeler, G.
JOURNAL OF ALLOYS AND COMPOUNDS. Volume: 509 (2011) - 2011 • 26
Sintering kinetics study of mechanically alloyed nanocrystalline Mo-30 wt.% W
Paul, B. and Jain, D. and Chakraborty, S.P. and Sharma, I.G. and Pillai, C.G.S. and Suri, A.K.
THERMOCHIMICA ACTA. Volume: 512 (2011) - 2011 • 25
Microstructure evolution and mechanical properties of an intermetallic Ti-43.5Al-4Nb-1Mo-0.1B alloy after ageing below the eutectoid temperature
Cha, L. and Clemens, H. and Dehm, G.
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH. Volume: 102 (2011) - 2011 • 24
Comparative atom probe study of Cu(In,Ga)Se 2 thin-film solar cells deposited on soda-lime glass and mild steel substrates
Choi, P.-P. and Cojocaru-Mirédin, O. and Wuerz, R. and Raabe, D.
JOURNAL OF APPLIED PHYSICS. Volume: 110 (2011) - 2011 • 23
Thermal stability of TiAIN/CrN multilayer coatings studied by atom probe tomography
Choi, P.-P. and Povstugar, I. and Ahn, J.-P. and Kostka, A. and Raabe, D.
ULTRAMICROSCOPY. Volume: 111 (2011) - 2011 • 22
Atomic-scale mechanisms of deformation-induced cementite decomposition in pearlite
Li, Y.J. and Choi, P. and Borchers, C. and Westerkamp, S. and Goto, S. and Raabe, D. and Kirchheim, R.
ACTA MATERIALIA. Volume: 59 (2011) - 2011 • 21
Effect of boron on the fracture behavior and grain boundary chemistry of Ni3Fe
Liu, Y. and Liu, C.T. and Heatherly, L. and George, E.P.
SCRIPTA MATERIALIA. Volume: 64 (2011) - 2011 • 20
Dislocation interactions and low-angle grain boundary strengthening
Liu, B. and Raabe, D. and Eisenlohr, P. and Roters, F. and Arsenlis, A. and Hommes, G.
ACTA MATERIALIA. Volume: 59 (2011) - 2011 • 19
Characterization of grain boundaries in Cu(In,Ga)Se 2 films using atom-probe tomography
Cojocaru-Mirédin, O. and Choi, P.-P. and Abou-Ras, D. and Schmidt, S.S. and Caballero, R. and Raabe, D.
IEEE JOURNAL OF PHOTOVOLTAICS. Volume: 1 (2011) - 2011 • 18
Atomic-scale distribution of impurities in cuinse2-based thin-film solar cells
Cojocaru-Miredin, O. and Choi, P. and Wuerz, R. and Raabe, D.
ULTRAMICROSCOPY. Volume: 111 (2011) - 2011 • 17
Mechanisms of grain boundary softening and strain-rate sensitivity in deformation of ultrafine-grained metals at high temperatures
Ahmed, N. and Hartmaier, A.
ACTA MATERIALIA. Volume: 59 (2011) - 2010 • 16
Creep properties beyond 1100°C and microstructure of Co-Re-Cr alloys
Brunner, M. and Hüttner, R. and Bölitz, M.-C. and Völkl, R. and Mukherji, D. and Rösler, J. and Depka, T. and Somsen, C. and Eggeler, G. and Glatzel, U.
MATERIALS SCIENCE AND ENGINEERING A. Volume: 528 (2010) - 2010 • 15
Influence of heat treatment and microstructure on the tensile pseudoelastic response of an Ni-rich NiTi shape memory alloy
Bujoreanu, L.-G. and Young, M.L. and Gollerthan, S. and Somsen, C. and Eggeler, G.
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH. Volume: 101 (2010) - 2010 • 14
The effect of grain size and grain orientation on deformation twinning in a Fe-22wt.% Mn-0.6wt.% C TWIP steel
Gutierrez-Urrutia, I. and Zaefferer, S. and Raabe, D.
MATERIALS SCIENCE AND ENGINEERING A. Volume: 527 (2010) - 2010 • 13
A review of crystallographic textures in chemical vapor-deposited diamond films
Liu, T. and Raabe, D. and Mao, W.-M.
SIGNAL, IMAGE AND VIDEO PROCESSING. Volume: 4 (2010) - 2010 • 12
Annealing behavior of ferritic-martensitic 9%Cr-ODS-Eurofer steel
Sandim, H.R.Z. and Renzetti, R.A. and Padilha, A.F. and Raabe, D. and Klimenkov, M. and Lindau, R. and Möslang, A.
MATERIALS SCIENCE AND ENGINEERING A. Volume: 527 (2010) - 2010 • 11
Ab initio tensile tests of Al bulk crystals and grain boundaries: Universality of mechanical behavior
Janisch, R. and Ahmed, N. and Hartmaier, A.
PHYSICAL REVIEW B - CONDENSED MATTER AND MATERIALS PHYSICS. Volume: 81 (2010) - 2010 • 10
Atomistic simulations of lattice defects in tungsten
Mrovec, M. and Elsässer, C. and Gumbsch, P.
INTERNATIONAL JOURNAL OF REFRACTORY METALS AND HARD MATERIALS. Volume: 28 (2010) - 2010 • 9
A two-dimensional dislocation dynamics model of the plastic deformation of polycrystalline metals
Ahmed, N. and Hartmaier, A.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS. Volume: 58 (2010) - 2010 • 8
Modeling size effects on fracture toughness by dislocation dynamics
Zeng, X.H. and Hartmaier, A.
ACTA MATERIALIA. Volume: 58 (2010) - 2010 • 7
Multiscale simulations on the grain growth process in nanostructured materials
Kamachali, R.D. and Hua, J. and Steinbach, I. and Hartmaier, A.
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH. Volume: 101 (2010) - 2010 • 6
Phase-field model with plastic flow for grain growth in nanocrystalline material
Steinbach, I. and Song, X. and Hartmaier, A.
PHILOSOPHICAL MAGAZINE. Volume: 90 (2010) - 2010 • 5
Microstructural characterization of lamellar features in TiAl by FIB imaging
Peter, D. and Eggeler, G. and Wagner, M.F.-X.
ADVANCED ENGINEERING MATERIALS. Volume: 12 (2010) - 2009 • 4
Modeling of dislocation patterns of small- and high-angle grain boundaries in aluminum
Zahn, D. and Tlatlik, H. and Raabe, D.
COMPUTATIONAL MATERIALS SCIENCE. Volume: 46 (2009) - 2009 • 3
Interstitial impurities at grain boundaries in metals: insight from atomistic calculations
Janisch, R. and Elsässer, C.
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH. Volume: 100 (2009) - 2009 • 2
Microtexture and grain boundaries in freestanding CVD diamond films: Growth and twinning mechanisms
Liu, T. and Raabe, D. and Mao, W. and Zaefferer, S.
ADVANCED FUNCTIONAL MATERIALS. Volume: 19 (2009) - 2009 • 1
The role of heterogeneous deformation on damage nucleation at grain boundaries in single phase metals
Bieler, T.R. and Eisenlohr, P. and Roters, F. and Kumar, D. and Mason, D.E. and Crimp, M.A. and Raabe, D.
INTERNATIONAL JOURNAL OF PLASTICITY. Volume: 25 (2009)