- Ruhr-Universität Bochum
Scientific output
Publications
Below, you can either scroll through the complete list of our annually published research in peer-reviewed journals or search for a specific author or keyword via the free text search.
- 2023 • 236
Microstructure and Mechanical Properties of a Ni-Based Superalloy Thin Film Investigated by Micropillar Compression
Kalchev, Y. and Zehl, R. and Piotrowiak, T. and Kostka, A. and Naujoks, D. and Pfetzing-Micklich, J. and Ludwig, A.
METALLURGICAL AND MATERIALS TRANSACTIONS A: PHYSICAL METALLURGY AND MATERIALS SCIENCE. Volume: 54 (2023) - 2023 • 235
Green laser powder bed fusion based fabrication and rate-dependent mechanical properties of copper lattices
Kang, S. and Gainov, R. and Heußen, D. and Bieler, S. and Sun, Z. and Weinberg, K. and Dehm, G. and Ramachandramoorthy, R.
MATERIALS AND DESIGN. Volume: 231 (2023) - 2023 • 234
Influence of cooling rate on the microstructure and room temperature mechanical properties in the refractory AlMo0.5NbTa0.5TiZr superalloy
Suárez Ocaño, P. and Manzoni, A. and Lopez-Galilea, I. and Ruttert, B. and Laplanche, G. and Agudo Jácome, L.
JOURNAL OF ALLOYS AND COMPOUNDS. Volume: 949 (2023) - 2023 • 233
A review of the metastable omega phase in beta titanium alloys: the phase transformation mechanisms and its effect on mechanical properties
Ballor, J. and Li, T. and Prima, F. and Boehlert, C. J. and Devaraj, A.
INTERNATIONAL MATERIALS REVIEWS. Volume: 68 (2023) - 2023 • 232
Mechanical properties and thermal stability of ZrCuAlx thin film metallic glasses: Experiments and first-principle calculations
Poltronieri, C. and Brognara, A. and Bignoli, F. and Evertz, S. and Djemia, P. and Faurie, D. and Challali, F. and Li, C.H. and Belliard, L. and Dehm, G. and Best, J.P. and Ghidelli, M.
ACTA MATERIALIA. Volume: 258 (2023) - 2022 • 231
Effect of composition and nanostructure on the mechanical properties and thermal stability of Zr100-xCux thin film metallic glasses
Brognara, A. and Best, J.P. and Djemia, P. and Faurie, D. and Dehm, G. and Ghidelli, M.
MATERIALS AND DESIGN. Volume: 219 (2022) - 2022 • 230
Effect of microstructure heterogeneity on the mechanical properties of friction stir welded reduced activation ferritic/martensitic steel
Li, S. and Vajragupta, N. and Biswas, A. and Tang, W. and Wang, H. and Kostka, A. and Yang, X. and Hartmaier, A.
SCRIPTA MATERIALIA. Volume: 207 (2022) - 2022 • 229
Effect of laser shock peening without protective coating on the surface mechanical properties of NiTi alloy
Wang, H. and Keller, S. and Chang, Y. and Kashaev, N. and Yan, K. and Gurevich, E.L. and Ostendorf, A.
JOURNAL OF ALLOYS AND COMPOUNDS. Volume: 896 (2022) - 2022 • 228
Influence of Mo/Cr ratio on the lamellar microstructure and mechanical properties of as-cast Al0.75CoCrFeNi compositionally complex alloys
Asabre, A. and Gemagami, P. and Parsa, A.B. and Wagner, C. and Kostka, A. and Laplanche, G.
JOURNAL OF ALLOYS AND COMPOUNDS. Volume: 899 (2022) - 2022 • 227
Dynamic cryo-mechanical properties of additively manufactured nanocrystalline nickel 3D microarchitectures
Schwiedrzik, J. and Ramachandramoorthy, R. and Edwards, T.E.J. and Schürch, P. and Casari, D. and Duarte, M.J. and Mohanty, G. and Dehm, G. and Maeder, X. and Philippe, L. and Breguet, J.-M. and Michler, J.
MATERIALS AND DESIGN. Volume: 220 (2022) - 2022 • 226
A review of the metastable omega phase in beta titanium alloys: the phase transformation mechanisms and its effect on mechanical properties
Ballor, J. and Li, T. and Prima, F. and Boehlert, C.J. and Devaraj, A.
INTERNATIONAL MATERIALS REVIEWS. Volume: (2022) - 2021 • 225
Additive manufacturing of a carbon-martensitic hot-work tool steel using a powder mixture – Microstructure, post-processing, mechanical properties
Großwendt, F. and Röttger, A. and Strauch, A. and Chehreh, A. and Uhlenwinkel, V. and Fechte-Heinen, R. and Walther, F. and Weber, S. and Theisen, W.
MATERIALS SCIENCE AND ENGINEERING A. Volume: 827 (2021) - 2021 • 224
Effects of temperature on mechanical properties and deformation mechanisms of the equiatomic CrFeNi medium-entropy alloy
Schneider, M. and Laplanche, G.
ACTA MATERIALIA. Volume: 204 (2021) - 2021 • 223
CrMnFeCoNi high entropy alloys with carbon and nitrogen: mechanical properties, wear and corrosion resistance
Chmielak, L. and Mujica Roncery, L. and Niederhofer, P. and Weber, S. and Theisen, W.
SN APPLIED SCIENCES. Volume: 3 (2021) - 2021 • 222
Effect of cooling rate on the microstructure and mechanical properties of a low-carbon low-alloyed steel
Wang, H. and Cao, L. and Li, Y. and Schneider, M. and Detemple, E. and Eggeler, G.
JOURNAL OF MATERIALS SCIENCE. Volume: 56 (2021) - 2021 • 221
Intercritical annealing to achieve a positive strain-rate sensitivity of mechanical properties and suppression of macroscopic plastic instabilities in multi-phase medium-Mn steels
Benzing, J.T. and Luecke, W.E. and Mates, S.P. and Ponge, D. and Raabe, D. and Wittig, J.E.
MATERIALS SCIENCE AND ENGINEERING A. Volume: 803 (2021) - 2021 • 220
Superior mechanical properties of a selective-laser-melted AlZnMgCuScZr alloy enabled by a tunable hierarchical microstructure and dual-nanoprecipitation
Zhu, Z. and Ng, F.L. and Seet, H.L. and Lu, W. and Liebscher, C.H. and Rao, Z. and Raabe, D. and Mui Ling Nai, S.
MATERIALS TODAY. Volume: (2021) - 2021 • 219
Design of refractory compositionally complex alloys with optimal mechanical properties
Ferrari, A. and Lysogorskiy, Y. and Drautz, R.
PHYSICAL REVIEW MATERIALS. Volume: 5 (2021) - 2021 • 218
Revealing atomic-scale vacancy-solute interaction in nickel
Morgado, F.F. and Katnagallu, S. and Freysoldt, C. and Klaes, B. and Vurpillot, F. and Neugebauer, J. and Raabe, D. and Neumeier, S. and Gault, B. and Stephenson, L.T.
SCRIPTA MATERIALIA. Volume: 203 (2021) - 2021 • 217
Link between plasma properties with morphological, structural and mechanical properties of thin Ti films deposited by high power impulse magnetron sputtering
Moskovkin, P. and Maszl, C. and Schierholz, R. and Breilmann, W. and Petersen, J. and Pflug, A. and Muller, J. and Raza, M. and Konstantinidis, S. and von Keudell, A. and Lucas, S.
SURFACE AND COATINGS TECHNOLOGY. Volume: 418 (2021) - 2020 • 216
Orientation-dependent deformation behavior of 316L steel manufactured by laser metal deposition and casting under local scratch and indentation load
Pöhl, F. and Hardes, C. and Scholz, F. and Frenzel, J.
MATERIALS. Volume: 13 (2020) - 2020 • 215
Thermal fatigue behavior of functionally graded W/EUROFER-layer systems using a new test apparatus
Emmerich, T. and Vaßen, R. and Aktaa, J.
FUSION ENGINEERING AND DESIGN. Volume: 154 (2020) - 2020 • 214
Generalized stability criterion for exploiting optimized mechanical properties by a general correlation between phase transformations and plastic deformations
Huang, L. and Lin, W. and Zhang, Y. and Feng, D. and Li, Y. and Chen, X. and Niu, K. and Liu, F.
ACTA MATERIALIA. Volume: 201 (2020) - 2020 • 213
Mapping the mechanical properties in nitride coatings at the nanometer scale
Zhang, Z. and Chen, Z. and Holec, D. and Liebscher, C.H. and Koutná, N. and Bartosik, M. and Zheng, Y. and Dehm, G. and Mayrhofer, P.H.
ACTA MATERIALIA. Volume: 194 (2020) - 2020 • 212
Densification of a high chromium cold work tool steel powder in different atmospheres by SLPS: Microstructure, heat treatment and micromechanical properties
Farayibi, P.K. and Blüm, M. and Weber, S.
MATERIALS SCIENCE AND ENGINEERING A. Volume: 777 (2020) - 2020 • 211
Joint investigation of strain partitioning and chemical partitioning in ferrite-containing TRIP-assisted steels
Tan, X. and Ponge, D. and Lu, W. and Xu, Y. and He, H. and Yan, J. and Wu, D. and Raabe, D.
ACTA MATERIALIA. Volume: 186 (2020) - 2020 • 210
Effect of Grain Statistics on Micromechanical Modeling: The Example of Additively Manufactured Materials Examined by Electron Backscatter Diffraction
Biswas, A. and Prasad, M.R.G. and Vajragupta, N. and Kostka, A. and Niendorf, T. and Hartmaier, A.
ADVANCED ENGINEERING MATERIALS. Volume: 22 (2020) - 2020 • 209
Crystal structure and composition dependence of mechanical properties of single-crystalline NbCo2 Laves phase
Luo, W. and Kirchlechner, C. and Zavašnik, J. and Lu, W. and Dehm, G. and Stein, F.
ACTA MATERIALIA. Volume: 184 (2020) - 2020 • 208
High entropy alloys: A focused review of mechanical properties and deformation mechanisms
George, E.P. and Curtin, W.A. and Tasan, C.C.
ACTA MATERIALIA. Volume: 188 (2020) - 2020 • 207
Influence of Process Parameters on the Aerosol Deposition (AD) of Yttria-Stabilized Zirconia Particles
Mishra, T.P. and Singh, R. and Mücke, R. and Malzbender, J. and Bram, M. and Guillon, O. and Vaßen, R.
JOURNAL OF THERMAL SPRAY TECHNOLOGY. Volume: (2020) - 2020 • 206
Sintering and biocompatibility of blended elemental Ti-xNb alloys
Chen, Y. and Han, P. and Dehghan-Manshadi, A. and Kent, D. and Ehtemam-Haghighi, S. and Jowers, C. and Bermingham, M. and Li, T. and Cooper-White, J. and Dargusch, M.S.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS. Volume: 104 (2020) - 2020 • 205
Microhardness and microabrasion behaviour of NiTi shape memory alloy after femtosecond laser shock peening without coating in air
Wang, H. and Gurevich, E.L. and Ostendorf, A.
PROCEEDINGS OF SPIE - THE INTERNATIONAL SOCIETY FOR OPTICAL ENGINEERING. Volume: 11273 (2020) - 2020 • 204
Experimental and Theoretical Investigation on Phase Formation and Mechanical Properties in Cr-Co-Ni Alloys Processed Using a Novel Thin-Film Quenching Technique
Naujoks, D. and Schneider, M. and Salomon, S. and Pfetzing-Micklich, J. and Subramanyam, A.P.A. and Hammerschmidt, T. and Drautz, R. and Frenzel, J. and Kostka, A. and Eggeler, G. and Laplanche, G. and Ludwig, Al.
ACS COMBINATORIAL SCIENCE. Volume: 22 (2020) - 2020 • 203
Thin-Film Microtensile-Test Structures for High-Throughput Characterization of Mechanical Properties
Oellers, T. and Arigela, V.G. and Kirchlechner, C. and Dehm, G. and Ludwig, Al.
ACS COMBINATORIAL SCIENCE. Volume: 22 (2020) - 2019 • 202
On the influence of the heat treatment on microstructure formation and mechanical properties of near-α Ti-Fe alloys
Sandlöbes, S. and Korte-Kerzel, S. and Raabe, D.
MATERIALS SCIENCE AND ENGINEERING A. Volume: 748 (2019) - 2019 • 201
Influence of different annealing atmospheres on the mechanical properties of freestanding MCrALY bond coats investigated by micro-tensile creep tests
Giese, S. and Neumeier, S. and Bergholz, J. and Naumenko, D. and Quadakkers, W.J. and Vaßen, R. and Göken, M.
METALS. Volume: 9 (2019) - 2019 • 200
Order/disorder processes and electromechanical properties of monoclinic GdCa4O(BO3)3
Münchhalfen, M. and Schreuer, J. and Reuther, C. and Möckel, R. and Götze, J. and Mehner, E. and Stöcker, H. and Meyer, D.
ZEITSCHRIFT FUR KRISTALLOGRAPHIE - CRYSTALLINE MATERIALS. Volume: (2019) - 2019 • 199
Thermo-mechanical properties of mullite ceramics: New data
Krenzel, T.F. and Schreuer, J. and Laubner, D. and Cichocki, M. and Schneider, H.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY. Volume: 102 (2019) - 2019 • 198
Crystal plasticity finite element simulation and experiment investigation of nanoscratching of single crystalline copper
Wang, Z. and Zhang, H. and Li, Z. and Li, G. and Zhang, J. and Zhang, J. and Hassan, H.U. and Yan, Y. and Hartmaier, A. and Sun, T.
WEAR. Volume: 430-431 (2019) - 2019 • 197
On the mechanism of extraordinary strain hardening in an interstitial high-entropy alloy under cryogenic conditions
Wang, Z. and Lu, W. and Raabe, D. and Li, Z.
JOURNAL OF ALLOYS AND COMPOUNDS. Volume: (2019) - 2019 • 196
Tungsten carbide as a deoxidation agent for plasma-facing tungsten-based materials
Šestan, A. and Zavašnik, J. and Kržmanc, M.M. and Kocen, M. and Jenuš, P. and Novak, S. and Čeh, M. and Dehm, G.
JOURNAL OF NUCLEAR MATERIALS. Volume: 524 (2019) - 2019 • 195
Joint contribution of transformation and twinning to the high strength-ductility combination of a FeMnCoCr high entropy alloy at cryogenic temperatures
He, Z.F. and Jia, N. and Ma, D. and Yan, H.L. and Li, Z.M. and Raabe, D.
MATERIALS SCIENCE AND ENGINEERING A. Volume: 759 (2019) - 2019 • 194
Understanding the role of cu and clustering on strain hardening and strain rate sensitivity of al-mg-si-cu alloys
Langille, M. and Diak, B.J. and De Geuser, F. and Guiglionda, G. and Meddeb, S. and Zhao, H. and Gault, B. and Raabe, D. and Deschamps, A.
MINERALS, METALS AND MATERIALS SERIES. Volume: (2019) - 2019 • 193
Iron Aluminides
Palm, M. and Stein, F. and Dehm, G.
ANNUAL REVIEW OF MATERIALS RESEARCH. Volume: 49 (2019) - 2019 • 192
Site-specific quasi in situ investigation of primary static recrystallization in a low carbon steel
Diehl, M. and Kertsch, L. and Traka, K. and Helm, D. and Raabe, D.
MATERIALS SCIENCE AND ENGINEERING A. Volume: 755 (2019) - 2019 • 191
Real-time nanoscale observation of deformation mechanisms in CrCoNi-based medium- to high-entropy alloys at cryogenic temperatures
Ding, Q. and Fu, X. and Chen, D. and Bei, H. and Gludovatz, B. and Li, J. and Zhang, Z. and George, E.P. and Yu, Q. and Zhu, T. and Ritchie, R.O.
MATERIALS TODAY. Volume: 25 (2019) - 2019 • 190
Achieving ultra-high strength and ductility in equiatomic CrCoNi with partially recrystallized microstructures
Slone, C.E. and Miao, J. and George, E.P. and Mills, M.J.
ACTA MATERIALIA. Volume: 165 (2019) - 2019 • 189
Development of a high-temperature micromechanics stage with a novel temperature measurement approach
Arigela, V.G. and Oellers, T. and Ludwig, Al. and Kirchlechner, C. and Dehm, G.
REVIEW OF SCIENTIFIC INSTRUMENTS. Volume: 90 (2019) - 2019 • 188
Effect of Al, Ti and C additions on Widmanstätten microstructures and mechanical properties of cast Al0.6CoCrFeNi compositionally complex alloys
Asabre, A. and Kostka, A. and Stryzhyboroda, O. and Pfetzing-Micklich, J. and Hecht, U. and Laplanche, G.
MATERIALS AND DESIGN. Volume: 184 (2019) - 2019 • 187
Data regarding the influence of Al, Ti, and C additions to as-cast Al0.6CoCrFeNi compositionally complex alloys on microstructures and mechanical properties
Asabre, A. and Pfetzing-Micklich, J. and Stryzhyboroda, O. and Kostka, A. and Hecht, U. and Laplanche, G.
DATA IN BRIEF. Volume: 27 (2019) - 2019 • 186
Effects of the Ion to Growth Flux Ratio on the Constitution and Mechanical Properties of Cr1- x-Alx-N Thin Films
Banko, L. and Ries, S. and Grochla, D. and Arghavani, M. and Salomon, S. and Pfetzing-Micklich, J. and Kostka, A. and Rogalla, D. and Schulze, J. and Awakowicz, P. and Ludwig, Al.
ACS COMBINATORIAL SCIENCE. Volume: 21 (2019) - 2019 • 185
Columnar to equiaxed transition and grain refinement of cast CrCoNi medium-entropy alloy by microalloying with titanium and carbon
Liu, X.W. and Laplanche, G. and Kostka, A. and Fries, S.G. and Pfetzing-Micklich, J. and Liu, G. and George, E.P.
JOURNAL OF ALLOYS AND COMPOUNDS. Volume: 775 (2019) - 2019 • 184
Hierarchical microstructure design to tune the mechanical behavior of an interstitial TRIP-TWIP high-entropy alloy
Su, J. and Raabe, D. and Li, Z.
ACTA MATERIALIA. Volume: 163 (2019) - 2019 • 183
A constitutive model for the sintering of suspension plasma-sprayed thermal barrier coating with vertical cracks
Lv, B. and Mücke, R. and Zhou, D. and Fan, X. and Wang, T.J. and Guillon, O. and Vaßen, R.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY. Volume: 102 (2019) - 2019 • 182
Sintering behavior of columnar thermal barrier coatings deposited by axial suspension plasma spraying (SPS)
Zhou, D. and Malzbender, J. and Sohn, Y.J. and Guillon, O. and Vaßen, R.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY. Volume: 39 (2019) - 2019 • 181
Emergence and impact of Al2TiO5 in Al2O3-TiO2 APS coatings
Richter, A. and Berger, L.-M. and Conze, S. and Sohn, Y.J. and Vaßen, R.
IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING. Volume: 480 (2019) - 2019 • 180
Impact of Al2O3-40 wt.% TiO2 feedstock powder characteristics on the sprayability, microstructure and mechanical properties of plasma sprayed coatings
Richter, A. and Berger, L.-M. and Sohn, Y.J. and Conze, S. and Sempf, K. and Vaßen, R.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY. Volume: 39 (2019) - 2019 • 179
Experimental and numerical study of mechanical properties of multi-phase medium-Mn TWIP-TRIP steel: Influences of strain rate and phase constituents
Benzing, J.T. and Liu, Y. and Zhang, X. and Luecke, W.E. and Ponge, D. and Dutta, A. and Oskay, C. and Raabe, D. and Wittig, J.E.
ACTA MATERIALIA. Volume: 177 (2019) - 2019 • 178
Time-Dependent Evolution of Microstructure and Mechanical Properties of Mortar
Röttger, A. and Youn-Čale, B.-Y. and Küpferle, J. and Lentz, J. and Breitenbücher, R. and Theisen, W.
INTERNATIONAL JOURNAL OF CIVIL ENGINEERING. Volume: 17 (2019) - 2019 • 177
Synthesis and mechanical testing of grain boundaries at the micro and sub-micro scale
Malyar, N.V. and Springer, H. and Wichert, J. and Dehm, G. and Kirchlechner, C.
MATERIALPRUEFUNG/MATERIALS TESTING. Volume: 61 (2019) - 2019 • 176
Temperature and load-ratio dependent fatigue-crack growth in the CrMnFeCoNi high-entropy alloy
Thurston, K.V.S. and Gludovatz, B. and Yu, Q. and Laplanche, G. and George, E.P. and Ritchie, R.O.
JOURNAL OF ALLOYS AND COMPOUNDS. Volume: 794 (2019) - 2019 • 175
Influence of Microstructural Features on the Strain Hardening Behavior of Additively Manufactured Metallic Components
Biswas, A. and Prasad, M.R.G. and Vajragupta, N. and ul Hassan, H. and Brenne, F. and Niendorf, T. and Hartmaier, A.
ADVANCED ENGINEERING MATERIALS. Volume: 21 (2019) - 2019 • 174
On the effects of microstructure on the mechanical properties of open-pore Al–11Zn foams
Matz, A.M. and Matz, B.S. and Parsa, A.B. and Jost, N. and Eggeler, G.
MATERIALS SCIENCE AND ENGINEERING A. Volume: 759 (2019) - 2018 • 173
Thermophysical and Mechanical Properties of Advanced Single Crystalline Co-base Superalloys
Volz, N. and Zenk, C.H. and Cherukuri, R. and Kalfhaus, T. and Weiser, M. and Makineni, S.K. and Betzing, C. and Lenz, M. and Gault, B. and Fries, S.G. and Schreuer, J. and Vaßen, R. and Virtanen, S. and Raabe, D. and Spiecker, E. and Neumeier, S. and Göken, M.
METALLURGICAL AND MATERIALS TRANSACTIONS A: PHYSICAL METALLURGY AND MATERIALS SCIENCE. Volume: 49 (2018) - 2018 • 172
Development of high modulus steels based on the Fe – Cr – B system
Baron, C. and Springer, H. and Raabe, D.
MATERIALS SCIENCE AND ENGINEERING A. Volume: 724 (2018) - 2018 • 171
Construction of statistically similar representative volume elements for discontinuous fiber composites
Sasagawa, T. and Tanaka, M. and Omote, R. and Balzani, D.
COMPOSITE STRUCTURES. Volume: 203 (2018) - 2018 • 170
Hydrogen embrittlement of tungsten induced by deuterium plasma: Insights from nanoindentation tests
Fang, X. and Kreter, A. and Rasinski, M. and Kirchlechner, C. and Brinckmann, S. and Linsmeier, C. and Dehm, G.
JOURNAL OF MATERIALS RESEARCH. Volume: 33 (2018) - 2018 • 169
Investigation of multiple laser shock peening on the mechanical property and corrosion resistance of shipbuilding 5083Al alloy under a simulated seawater environment
Wang, H. and Huang, Y. and Zhang, W. and Ostendorf, A.
APPLIED OPTICS. Volume: 57 (2018) - 2018 • 168
Coupled effect of crystallographic orientation and indenter geometry on nanoindentation of single crystalline copper
Wang, Z. and Zhang, J. and Hassan, H.U. and Zhang, J. and Yan, Y. and Hartmaier, A. and Sun, T.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES. Volume: 148 (2018) - 2018 • 167
On the accumulation of irreversible plastic strain during compression loading of open-pore metallic foams
Matz, A.M. and Matz, B.S. and Jost, N. and Eggeler, G.
MATERIALS SCIENCE AND ENGINEERING A. Volume: 728 (2018) - 2018 • 166
Ab initio simulation of hydrogen-induced decohesion in cementite-containing microstructures
McEniry, E.J. and Hickel, T. and Neugebauer, J.
ACTA MATERIALIA. Volume: 150 (2018) - 2018 • 165
Effects of strain rate on mechanical properties and deformation behavior of an austenitic Fe-25Mn-3Al-3Si TWIP-TRIP steel
Benzing, J.T. and Poling, W.A. and Pierce, D.T. and Bentley, J. and Findley, K.O. and Raabe, D. and Wittig, J.E.
MATERIALS SCIENCE AND ENGINEERING A. Volume: 711 (2018) - 2018 • 164
Influence of short-term heat treatment on the mechanical properties of Al–Mg–Si profiles
Kernebeck, S. and Weber, S.
METALS. Volume: 8 (2018) - 2018 • 163
Experimental and Numerical Investigations on Interdiffusion Profiles in Compounds Produced by Sinter-Cladding
Blüm, M. and Theisen, W. and Weber, S.
METALLURGICAL AND MATERIALS TRANSACTIONS A: PHYSICAL METALLURGY AND MATERIALS SCIENCE. Volume: 49 (2018) - 2018 • 162
Numerical and Experimental Study of the Spatial Stress Distribution on the Cornea Surface During a Non-Contact Tonometry Examination
Muench, S. and Roellig, M. and Spoerl, E. and Balzani, D.
EXPERIMENTAL MECHANICS. Volume: (2018) - 2018 • 161
Boron doped ultrastrong and ductile high-entropy alloys
Seol, J.B. and Bae, J.W. and Li, Z. and Chan Han, J. and Kim, J.G. and Raabe, D. and Kim, H.S.
ACTA MATERIALIA. Volume: 151 (2018) - 2018 • 160
Systematic Investigation on the Influence of Spray Parameters on the Mechanical Properties of Atmospheric Plasma-Sprayed YSZ Coatings
Mutter, M. and Mauer, G. and Mücke, R. and Guillon, O. and Vaßen, R.
JOURNAL OF THERMAL SPRAY TECHNOLOGY. Volume: (2018) - 2018 • 159
Modifying the nanostructure and the mechanical properties of Mo2BC hard coatings: Influence of substrate temperature during magnetron sputtering
Gleich, S. and Soler, R. and Fager, H. and Bolvardi, H. and Achenbach, J.-O. and Hans, M. and Primetzhofer, D. and Schneider, J.M. and Dehm, G. and Scheu, C.
MATERIALS AND DESIGN. Volume: 142 (2018) - 2018 • 158
Thermal stability of nanocomposite Mo2BC hard coatings deposited by magnetron sputtering
Gleich, S. and Breitbach, B. and Peter, N.J. and Soler, R. and Bolvardi, H. and Schneider, J.M. and Dehm, G. and Scheu, C.
SURFACE AND COATINGS TECHNOLOGY. Volume: 349 (2018) - 2018 • 157
Microstructure and Mechanical Properties of CMSX-4 Single Crystals Prepared by Additive Manufacturing
Körner, C. and Ramsperger, M. and Meid, C. and Bürger, D. and Wollgramm, P. and Bartsch, M. and Eggeler, G.
METALLURGICAL AND MATERIALS TRANSACTIONS A: PHYSICAL METALLURGY AND MATERIALS SCIENCE. Volume: (2018) - 2018 • 156
On the grain boundary strengthening effect of boron in γ/γ′ Cobalt-base superalloys
Kolb, M. and Freund, L.P. and Fischer, F. and Povstugar, I. and Makineni, S.K. and Gault, B. and Raabe, D. and Müller, J. and Spiecker, E. and Neumeier, S. and Göken, M.
ACTA MATERIALIA. Volume: 145 (2018) - 2018 • 155
Nano-laminated thin film metallic glass design for outstanding mechanical properties
Kontis, P. and Köhler, M. and Evertz, S. and Chen, Y.-T. and Schnabel, V. and Soler, R. and Bednarick, J. and Kirchlechner, C. and Dehm, G. and Raabe, D. and Schneider, J.M. and Gault, B.
SCRIPTA MATERIALIA. Volume: 155 (2018) - 2018 • 154
Mechanical properties of sprayed overlayers on superalloy substrates, obtained via indentation testing
Campbell, J.E. and Kalfhaus, T. and Vassen, R. and Thompson, R.P. and Dean, J. and Clyne, T.W.
ACTA MATERIALIA. Volume: 154 (2018) - 2018 • 153
Microstructure and mechanical properties in the thin film system Cu-Zr
Oellers, T. and Raghavan, R. and Chakraborty, J. and Kirchlechner, C. and Kostka, A. and Liebscher, C.H. and Dehm, G. and Ludwig, Al.
THIN SOLID FILMS. Volume: 645 (2018) - 2018 • 152
Hardness and modulus of Fe2B, Fe3(C,B), and Fe23(C,B)6 borides and carboborides in the Fe-C-B system
Lentz, J. and Röttger, A. and Theisen, W.
MATERIALS CHARACTERIZATION. Volume: 135 (2018) - 2018 • 151
Overview on micro- and nanomechanical testing: New insights in interface plasticity and fracture at small length scales
Dehm, G. and Jaya, B.N. and Raghavan, R. and Kirchlechner, C.
ACTA MATERIALIA. Volume: 142 (2018) - 2018 • 150
Microstructure and mechanical properties of Al0.7CoCrFeNi high-entropy-alloy prepared by directional solidification
Liu, G. and Liu, L. and Liu, X. and Wang, Z. and Han, Z. and Zhang, G. and Kostka, A.
INTERMETALLICS. Volume: 93 (2018) - 2017 • 149
Reasons for the superior mechanical properties of medium-entropy CrCoNi compared to high-entropy CrMnFeCoNi
Laplanche, G. and Kostka, A. and Reinhart, C. and Hunfeld, J. and Eggeler, G. and George, E.P.
ACTA MATERIALIA. Volume: 128 (2017) - 2017 • 148
A TRIP-assisted dual-phase high-entropy alloy: Grain size and phase fraction effects on deformation behavior
Li, Z. and Tasan, C.C. and Pradeep, K.G. and Raabe, D.
ACTA MATERIALIA. Volume: 131 (2017) - 2017 • 147
Ab initio assisted design of quinary dual-phase high-entropy alloys with transformation-induced plasticity
Li, Z. and Körmann, F. and Grabowski, B. and Neugebauer, J. and Raabe, D.
ACTA MATERIALIA. Volume: 136 (2017) - 2017 • 146
Influence of compositional inhomogeneity on mechanical behavior of an interstitial dual-phase high-entropy alloy
Li, Z. and Raabe, D.
MATERIALS CHEMISTRY AND PHYSICS. Volume: (2017) - 2017 • 145
Strong and Ductile Non-equiatomic High-Entropy Alloys: Design, Processing, Microstructure, and Mechanical Properties
Li, Z. and Raabe, D.
JOM. Volume: 69 (2017) - 2016 • 144
Atom probe tomography of metallic nanostructures
Hono, K. and Raabe, D. and Ringer, S.P. and Seidman, D.N.
MRS BULLETIN. Volume: 41 (2016) - 2016 • 143
In-situ metal matrix composite steels: Effect of alloying and annealing on morphology, structure and mechanical properties of TiB2 particle containing high modulus steels
Aparicio-Fernández, R. and Springer, H. and Szczepaniak, A. and Zhang, H. and Raabe, D.
ACTA MATERIALIA. Volume: 107 (2016) - 2016 • 142
Coarse graining of force fields for metal-organic frameworks
Dürholt, J.P. and Galvelis, R. and Schmid, R.
DALTON TRANSACTIONS. Volume: 45 (2016) - 2016 • 141
Modeling of low-alloyed trip-steels based on direct micro-macro simulations
Prüger, S. and Gandhi, A. and Balzani, D.
ECCOMAS CONGRESS 2016 - PROCEEDINGS OF THE 7TH EUROPEAN CONGRESS ON COMPUTATIONAL METHODS IN APPLIED SCIENCES AND ENGINEERING. Volume: 2 (2016) - 2016 • 140
Effects of Mn additions on microstructure and properties of Fe–TiB2 based high modulus steels
Baron, C. and Springer, H. and Raabe, D.
MATERIALS AND DESIGN. Volume: 111 (2016) - 2016 • 139
Effect of intercritical deformation on microstructure and mechanical properties of a low-silicon aluminum-added hot-rolled directly quenched and partitioned steel
Tan, X.-D. and Xu, Y.-B. and Ponge, D. and Yang, X.-L. and Hu, Z.-P. and Peng, F. and Ju, X.-W. and Wu, D. and Raabe, D.
MATERIALS SCIENCE AND ENGINEERING A. Volume: 656 (2016) - 2016 • 138
Tempering behavior of a low nitrogen boron-added 9%Cr steel
Fedorova, I. and Kostka, A. and Tkachev, E. and Belyakov, A. and Kaibyshev, R.
MATERIALS SCIENCE AND ENGINEERING A. Volume: 662 (2016) - 2016 • 137
Influence of the twin microstructure on the mechanical properties in magnetic shape memory alloys
Reinholz, B. and Brinckmann, S. and Hartmaier, A. and Muntifering, B. and Knowlton, W.B. and Müllner, P.
ACTA MATERIALIA. Volume: 108 (2016) - 2016 • 136
Characterization of mechanical properties of hydroxyapatite-silicon-multi walled carbon nano tubes composite coatings synthesized by EPD on NiTi alloys for biomedical application
Khalili, V. and Khalil-Allafi, J. and Sengstock, C. and Motemani, Y. and Paulsen, A. and Frenzel, J. and Eggeler, G. and Köller, M.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS. Volume: 59 (2016) - 2016 • 135
Computational modeling of dual-phase steels based on representative three-dimensional microstructures obtained from EBSD data
Brands, D. and Balzani, D. and Scheunemann, L. and Schröder, J. and Richter, H. and Raabe, D.
ARCHIVE OF APPLIED MECHANICS. Volume: 86 (2016) - 2016 • 134
First-principles modeling of energetic and mechanical properties of Ni-Cr, Ni-Re and Cr-Re random alloys
Breidi, A. and Fries, S.G. and Palumbo, M. and Ruban, A.V.
COMPUTATIONAL MATERIALS SCIENCE. Volume: 117 (2016) - 2016 • 133
Revealing the relationships between chemistry, topology and stiffness of ultrastrong Co-based metallic glass thin films: A combinatorial approach
Schnabel, V. and Köhler, M. and Evertz, S. and Gamcova, J. and Bednarcik, J. and Music, D. and Raabe, D. and Schneider, J.M.
ACTA MATERIALIA. Volume: 107 (2016) - 2016 • 132
Experimental and modelling characterisation of residual stresses in cylindrical samples of rapidly cooled bulk metallic glass
Korsunsky, A.M. and Sui, T. and Salvati, E. and George, E.P. and Sebastiani, M.
MATERIALS AND DESIGN. Volume: 104 (2016) - 2016 • 131
Direction-dependent mechanical characterization of cellulose-based composite vulcanized fiber
Scholz, R. and Mittendorf, R. M. and Engels, J. K. and Hartmaier, A. and Kunne, B. and Walther, F.
MATERIALS TESTING. Volume: 58 (2016) - 2016 • 130
(Nbx, Zr1-x)4AlC3 MAX Phase Solid Solutions: Processing, Mechanical Properties, and Density Functional Theory Calculations
Lapauw, T. and Tytko, D. and Vanmeensel, K. and Huang, S. and Choi, P.-P. and Raabe, D. and Caspi, E.N. and Ozeri, O. and To Baben, M. and Schneider, J.M. and Lambrinou, K. and Vleugels, J.
INORGANIC CHEMISTRY. Volume: 55 (2016) - 2016 • 129
Plasticity of the ω-Al7Cu2Fe phase
Laplanche, G. and Bonneville, J. and Joulain, A. and Gauthier-Brunet, V. and Dubois, S.
JOURNAL OF ALLOYS AND COMPOUNDS. Volume: 665 (2016) - 2016 • 128
Improving the mechanical properties of Fe – TiB2 high modulus steels through controlled solidification processes
Zhang, H. and Springer, H. and Aparicio-Fernández, R. and Raabe, D.
ACTA MATERIALIA. Volume: 118 (2016) - 2016 • 127
Dynamic high-temperature tensile characterization of an iridium alloy
Song, B. and Nelson, K. and Lipinski, R. and Bignell, J. and Ulrich, G.B. and George, E.P.
CONFERENCE PROCEEDINGS OF THE SOCIETY FOR EXPERIMENTAL MECHANICS SERIES. Volume: 85 (2016) - 2015 • 126
The evolution of microstructure and mechanical properties of Ti-5Al-5Mo-5V-2Cr-1Fe during ageing
Ahmed, M. and Li, T. and Casillas, G. and Cairney, J.M. and Wexler, D. and Pereloma, E.V.
JOURNAL OF ALLOYS AND COMPOUNDS. Volume: 629 (2015) - 2015 • 125
Mechanisms of subgrain coarsening and its effect on the mechanical properties of carbon-supersaturated nanocrystalline hypereutectoid steel
Li, Y.J. and Kostka, A. and Choi, P. and Goto, S. and Ponge, D. and Kirchheim, R. and Raabe, D.
ACTA MATERIALIA. Volume: 84 (2015) - 2015 • 124
Atom probe tomography investigation of heterogeneous short-range ordering in the 'komplex' phase state (K-state) of Fe-18Al (at.%)
Marceau, R.K.W. and Ceguerra, A.V. and Breen, A.J. and Palm, M. and Stein, F. and Ringer, S.P. and Raabe, D.
INTERMETALLICS. Volume: 64 (2015) - 2015 • 123
Formation of dislocation networks in a coherent Cu Σ3(1 1 1) twin boundary
Jeon, J.B. and Dehm, G.
SCRIPTA MATERIALIA. Volume: 102 (2015) - 2015 • 122
Multiphase microstructures via confined precipitation and dissolution of vessel phases: Example of austenite in martensitic steel
Belde, M. and Springer, H. and Inden, G. and Raabe, D.
ACTA MATERIALIA. Volume: 86 (2015) - 2015 • 121
Microstructure design and mechanical properties in a near-α Ti-4Mo alloy
Tarzimoghadam, Z. and Sandlöbes, S. and Pradeep, K.G. and Raabe, D.
ACTA MATERIALIA. Volume: 97 (2015) - 2015 • 120
Nanoindentation studies of the mechanical properties of the μ phase in a creep deformed Re containing nickel-based superalloy
Rehman, H.U. and Durst, K. and Neumeier, S. and Parsa, A.B. and Kostka, A. and Eggeler, G. and Göken, M.
MATERIALS SCIENCE AND ENGINEERING A. Volume: 634 (2015) - 2015 • 119
Correlations between microstructure and room temperature tensile behavior of a duplex TNB alloy for systematically heat treated samples
Kabir, M.R. and Bartsch, M. and Chernova, L. and Kelm, K. and Wischek, J.
MATERIALS SCIENCE AND ENGINEERING A. Volume: 635 (2015) - 2015 • 118
Importance of dislocation pile-ups on the mechanical properties and the Bauschinger effect in microcantilevers
Kapp, M.W. and Kirchlechner, C. and Pippan, R. and Dehm, G.
JOURNAL OF MATERIALS RESEARCH. Volume: 30 (2015) - 2015 • 117
3D structural and atomic-scale analysis of lath martensite: Effect of the transformation sequence
Morsdorf, L. and Tasan, C.C. and Ponge, D. and Raabe, D.
ACTA MATERIALIA. Volume: 95 (2015) - 2015 • 116
Processing, Microstructure and Mechanical Properties of the CrMnFeCoNi High-Entropy Alloy
Gludovatz, B. and George, E.P. and Ritchie, R.O.
JOM. Volume: 67 (2015) - 2015 • 115
Alloying effects on microstructure formation of dual phase steels
Schemmann, L. and Zaefferer, S. and Raabe, D. and Friedel, F. and Mattissen, D.
ACTA MATERIALIA. Volume: 95 (2015) - 2015 • 114
Mechanical properties, microstructure and thermal stability of a nanocrystalline CoCrFeMnNi high-entropy alloy after severe plastic deformation
Schuh, B. and Mendez-Martin, F. and Völker, B. and George, E.P. and Clemens, H. and Pippan, R. and Hohenwarter, A.
ACTA MATERIALIA. Volume: 96 (2015) - 2015 • 113
Evolution of microstructure and mechanical properties of coated Co-base superalloys during heat treatment and thermal exposure
Webler, R. and Ziener, M. and Neumeier, S. and Terberger, P.J. and Vaßen, R. and Göken, M.
MATERIALS SCIENCE AND ENGINEERING A. Volume: 628 (2015) - 2015 • 112
Nitrogen uptake of nickel free austenitic stainless steel powder during heat treatment-an XPS study
Weddeling, A. and Lefor, K. and Hryha, E. and Huth, S. and Nyborg, L. and Weber, S. and Theisen, W.
SURFACE AND INTERFACE ANALYSIS. Volume: 47 (2015) - 2015 • 111
Thermo-physical properties of heat-treatable steels in the temperature range relevant for hot-stamping applications
Kuepferle, J. and Wilzer, J. and Weber, S. and Theisen, W.
JOURNAL OF MATERIALS SCIENCE. Volume: 50 (2015) - 2015 • 110
From hard to rubber-like: mechanical properties of resorcinol–formaldehyde aerogels
Schwan, M. and Naikade, M. and Raabe, D. and Ratke, L.
JOURNAL OF MATERIALS SCIENCE. Volume: 50 (2015) - 2015 • 109
Wet Nanoindentation of the Solid Electrolyte Interphase on Thin Film Si Electrodes
Kuznetsov, V. and Zinn, A.-H. and Zampardi, G. and Borhani-Haghighi, S. and La Mantia, F. and Ludwig, Al. and Schuhmann, W. and Ventosa, E.
ACS APPLIED MATERIALS AND INTERFACES. Volume: 7 (2015) - 2015 • 108
Structural stability of Fe-based topologically close-packed phases
Ladines, A.N. and Hammerschmidt, T. and Drautz, R.
INTERMETALLICS. Volume: 59 (2015) - 2015 • 107
Hydrogen diffusion and segregation in α iron ∑ 3 (111) grain boundaries
Hamza, M. and Hatem, T.M. and Raabe, D. and El-Awady, J.A.
ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, PROCEEDINGS (IMECE). Volume: 9-2015 (2015) - 2015 • 106
Microstructural evolution of a CoCrFeMnNi high-entropy alloy after swaging and annealing
Laplanche, G. and Horst, O. and Otto, F. and Eggeler, G. and George, E.P.
JOURNAL OF ALLOYS AND COMPOUNDS. Volume: 647 (2015) - 2015 • 105
Micro-tension study of miniaturized cu lines at variable temperatures
Wimmer, A. and Heinz, W. and Leitner, A. and Detzel, T. and Robl, W. and Kirchlechner, C. and Dehm, G.
ACTA MATERIALIA. Volume: 92 (2015) - 2015 • 104
Advanced scale bridging microstructure analysis of single crystal Ni-base superalloys
Parsa, A.B. and Wollgramm, P. and Buck, H. and Somsen, C. and Kostka, A. and Povstugar, I. and Choi, P.-P. and Raabe, D. and Dlouhy, A. and Müller, J. and Spiecker, E. and Demtroder, K. and Schreuer, J. and Neuking, K. and Eggeler, G.
ADVANCED ENGINEERING MATERIALS. Volume: 17 (2015) - 2014 • 103
Influence of formation and coarsening of the laves phase on the mechanical properties of heat-resistant ferritic steels
Klein, S. and Nabiran, N. and Weber, S. and Theisen, W.
STEEL RESEARCH INTERNATIONAL. Volume: 85 (2014) - 2014 • 102
High-precision green densities of thick films and their correlation with powder, ink, and film properties
Mücke, R. and Büchler, O. and Menzler, N.H. and Lindl, B. and Vaßen, R. and Buchkremer, H.P.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY. Volume: 34 (2014) - 2014 • 101
Experimental investigation and numerical simulation of the mechanical and thermal behavior of a superelastic shape memory alloy beam during bending
Ullrich, J. and Schmidt, M. and Schütze, A. and Wieczorek, A. and Frenzel, J. and Eggeler, G. and Seelecke, S.
ASME 2014 CONFERENCE ON SMART MATERIALS, ADAPTIVE STRUCTURES AND INTELLIGENT SYSTEMS, SMASIS 2014. Volume: 2 (2014) - 2014 • 100
The modeling scheme to evaluate the influence of microstructure features on microcrack formation of DP-steel: The artificial microstructure model and its application to predict the strain hardening behavior
Vajragupta, N. and Wechsuwanmanee, P. and Lian, J. and Sharaf, M. and Münstermann, S. and Ma, A. and Hartmaier, A. and Bleck, W.
COMPUTATIONAL MATERIALS SCIENCE. Volume: 94 (2014) - 2014 • 99
Intrinsic acidity of surface sites in calcium silicate hydrates and its implication to their electrokinetic properties
Churakov, S.V. and Labbez, C. and Pegado, L. and Sulpizi, M.
JOURNAL OF PHYSICAL CHEMISTRY C. Volume: 118 (2014) - 2014 • 98
Investigation of Optical, Electrical, and Mechanical Properties of MOCVD-grown ZrO2 Films
Dang, V.-S. and Banerjee, M. and Zhu, H. and Srinivasan, N.B. and Parala, H. and Pfetzing-Micklich, J. and Wieck, A.D. and Devi, A.
CHEMICAL VAPOR DEPOSITION. Volume: 20 (2014) - 2014 • 97
Mechanical properties of Al-Cu-Fe quasicrystalline and crystalline phases: An analogy
Laplanche, G. and Bonneville, J. and Joulain, A. and Gauthier-Brunet, V. and Dubois, S.
INTERMETALLICS. Volume: 50 (2014) - 2014 • 96
Influence of the PM-Processing Route and Nitrogen Content on the Properties of Ni-Free Austenitic Stainless Steel
Lefor, K. and Walter, M. and Weddeling, A. and Hryha, E. and Huth, S. and Weber, S. and Nyborg, L. and Theisen, W.
METALLURGICAL AND MATERIALS TRANSACTIONS A: PHYSICAL METALLURGY AND MATERIALS SCIENCE. Volume: 46 (2014) - 2014 • 95
Temperature dependence of the mechanical properties of equiatomic solid solution alloys with face-centered cubic crystal structures
Wu, Z. and Bei, H. and Pharr, G.M. and George, E.P.
ACTA MATERIALIA. Volume: 81 (2014) - 2014 • 94
Impact of nanodiffusion on the stacking fault energy in high-strength steels
Hickel, T. and Sandlöbes, S. and Marceau, R.K.W. and Dick, A. and Bleskov, I. and Neugebauer, J. and Raabe, D.
ACTA MATERIALIA. Volume: 75 (2014) - 2014 • 93
CrN/AlN nanolaminate coatings deposited via high power pulsed and middle frequency pulsed magnetron sputtering
Bagcivan, N. and Bobzin, K. and Ludwig, Al. and Grochla, D. and Brugnara, R.H.
THIN SOLID FILMS. Volume: 572 (2014) - 2014 • 92
Precipitation of the α-phase in an ultrafine grained beta-titanium alloy processed by severe plastic deformation
Li, T. and Kent, D. and Sha, G. and Dargusch, M.S. and Cairney, J.M.
MATERIALS SCIENCE AND ENGINEERING A. Volume: 605 (2014) - 2014 • 91
Elemental partitioning and mechanical properties of Ti- and Ta-containing Co-Al-W-base superalloys studied by atom probe tomography and nanoindentation
Povstugar, I. and Choi, P.-P. and Neumeier, S. and Bauer, A. and Zenk, C.H. and Göken, M. and Raabe, D.
ACTA MATERIALIA. Volume: 78 (2014) - 2014 • 90
Ultrastructural organization and micromechanical properties of shark tooth enameloid
Enax, J. and Janus, A.M. and Raabe, D. and Epple, M. and Fabritius, H.-O.
ACTA BIOMATERIALIA. Volume: 10 (2014) - 2014 • 89
Mechanical properties of SiLix thin films at different stages of electrochemical Li insertion
Zinn, A.-H. and Borhani-Haghighi, S. and Ventosa, E. and Pfetzing-Micklich, J. and Wieczorek, N. and Schuhmann, W. and Ludwig, Al.
PHYSICA STATUS SOLIDI (A) APPLICATIONS AND MATERIALS SCIENCE. Volume: 211 (2014) - 2014 • 88
Plasma spray physical vapor deposition of La1-x Sr x Co y Fe1-y O3-δ Thin-film oxygen transport membrane on porous metallic supports
Jarligo, M.O. and Mauer, G. and Bram, M. and Baumann, S. and Vaßen, R.
JOURNAL OF THERMAL SPRAY TECHNOLOGY. Volume: 23 (2014) - 2014 • 87
Hydrogen embrittlement of a carbon segregated σ5 (310) [001] symmetrical tilt grain boundary in α-Fe
Tahir, A.M. and Janisch, R. and Hartmaier, A.
MATERIALS SCIENCE AND ENGINEERING A. Volume: 612 (2014) - 2014 • 86
Investigation on the effectiveness of chemically synthesized nano cement in controlling the physical and mechanical performances of concrete
Jo, B.W. and Chakraborty, S. and Kim, K.H.
CONSTRUCTION AND BUILDING MATERIALS. Volume: 70 (2014) - 2014 • 85
Composition Dependence of Phase Stability, Deformation Mechanisms, and Mechanical Properties of the CoCrFeMnNi High-Entropy Alloy System
Tasan, C.C. and Deng, Y. and Pradeep, K.G. and Yao, M.J. and Springer, H. and Raabe, D.
JOM. Volume: 66 (2014) - 2014 • 84
The principle of the minimum of the dissipation potential for non-isothermal processes
Junker, P. and Makowski, J. and Hackl, K.
CONTINUUM MECHANICS AND THERMODYNAMICS. Volume: 26 (2014) - 2014 • 83
Interface properties in lamellar TiAl microstructures from density functional theory
Kanani, M. and Hartmaier, A. and Janisch, R.
INTERMETALLICS. Volume: 54 (2014) - 2014 • 82
Plasma Spraying of Ceramics with Particular Difficulties in Processing
Mauer, G. and Schlegel, N. and Guignard, A. and Jarligo, M.O. and Rezanka, S. and Hospach, A. and Vaßen, R.
JOURNAL OF THERMAL SPRAY TECHNOLOGY. Volume: 24 (2014) - 2014 • 81
Designing Heusler nanoprecipitates by elastic misfit stabilization in Fe-Mn maraging steels
Millán, J. and Sandlöbes, S. and Al-Zubi, A. and Hickel, T. and Choi, P. and Neugebauer, J. and Ponge, D. and Raabe, D.
ACTA MATERIALIA. Volume: 76 (2014) - 2014 • 80
Ductility improvement of Mg alloys by solid solution: Ab initio modeling, synthesis and mechanical properties
Sandlöbes, S. and Pei, Z. and Friák, M. and Zhu, L.-F. and Wang, F. and Zaefferer, S. and Raabe, D. and Neugebauer, J.
ACTA MATERIALIA. Volume: 70 (2014) - 2013 • 79
Influence of fiber alignment on creep in directionally solidified NiAl-10Mo in-situ composites
Seemüller, C. and Heilmaier, M. and Haenschke, T. and Bei, H. and Dlouhy, A. and George, E.P.
INTERMETALLICS. Volume: 35 (2013) - 2013 • 78
Hydrogen-assisted failure in a twinning-induced plasticity steel studied under in situ hydrogen charging by electron channeling contrast imaging
Koyama, M. and Akiyama, E. and Tsuzaki, K. and Raabe, D.
ACTA MATERIALIA. Volume: 61 (2013) - 2013 • 77
Re effects on phase stability and mechanical properties of Mo SS+Mo3Si+Mo5SiB2 alloys
Yang, Y. and Bei, H. and Tiley, J. and George, E.P.
JOURNAL OF ALLOYS AND COMPOUNDS. Volume: 556 (2013) - 2013 • 76
The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy
Otto, F. and Dlouhý, A. and Somsen, C. and Bei, H. and Eggeler, G. and George, E.P.
ACTA MATERIALIA. Volume: 61 (2013) - 2013 • 75
Mechanical properties of zirconia composite ceramics
Zhang, Y. and Malzbender, J. and Mack, D.E. and Jarligo, M.O. and Cao, X. and Li, Q. and Vaßen, R. and Stöver, D.
CERAMICS INTERNATIONAL. Volume: 39 (2013) - 2013 • 74
On the crystallographic anisotropy of nanoindentation in pseudoelastic NiTi
Pfetzing-Micklich, J. and Somsen, C. and Dlouhy, A. and Begau, C. and Hartmaier, A. and Wagner, M.F.-X. and Eggeler, G.
ACTA MATERIALIA. Volume: 61 (2013) - 2013 • 73
Bulk combinatorial design of ductile martensitic stainless steels through confined martensite-to-austenite reversion
Springer, H. and Belde, M. and Raabe, D.
MATERIALS SCIENCE AND ENGINEERING A. Volume: 582 (2013) - 2013 • 72
Polymer modified jute fibre as reinforcing agent controlling the physical and mechanical characteristics of cement mortar
Chakraborty, S. and Kundu, S.P. and Roy, A. and Adhikari, B. and Majumder, S.B.
CONSTRUCTION AND BUILDING MATERIALS. Volume: 49 (2013) - 2013 • 71
Improvement of the mechanical properties of jute fibre reinforced cement mortar: A statistical approach
Chakraborty, S. and Kundu, S.P. and Roy, A. and Basak, R.K. and Adhikari, B. and Majumder, S.B.
CONSTRUCTION AND BUILDING MATERIALS. Volume: 38 (2013) - 2013 • 70
Fabrication of Borassus fruit lignocellulose fiber/PP composites and comparison with jute, sisal and coir fibers
Sudhakara, P. and Jagadeesh, D. and Wang, Y. and Venkata Prasad, C. and Devi, A.P.K. and Balakrishnan, G. and Kim, B.S. and Song, J.I.
CARBOHYDRATE POLYMERS. Volume: 98 (2013) - 2013 • 69
Massive anisotropic thermal expansion and thermo-responsive breathing in metal-organic frameworks modulated by linker functionalization
Henke, S. and Schneemann, A. and Fischer, R.A.
ADVANCED FUNCTIONAL MATERIALS. Volume: 23 (2013) - 2013 • 68
Ab initio calculation of traction separation laws for a grain boundary in molybdenum with segregated C impurites
Tahir, A.M. and Janisch, R. and Hartmaier, A.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING. Volume: 21 (2013) - 2013 • 67
A thermodynamic approach for the development of austenitic steels with a high resistance to hydrogen gas embrittlement
Martín, M. and Weber, S. and Theisen, W.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY. Volume: 38 (2013) - 2013 • 66
Ab initio prediction of the critical thickness of a precipitate
Sampath, S. and Janisch, R.
JOURNAL OF PHYSICS CONDENSED MATTER. Volume: 25 (2013) - 2013 • 65
Characterization of crocodile teeth: Correlation of composition, microstructure, and hardness
Enax, J. and Fabritius, H.-O. and Rack, A. and Prymak, O. and Raabe, D. and Epple, M.
JOURNAL OF STRUCTURAL BIOLOGY. Volume: 184 (2013) - 2013 • 64
Combined experimental and numerical approach for linking microstructure and mechanical properties on different length scales for near γ-TiAl alloys
Kabir, M.R. and Bartsch, M. and Chernova, L. and Schneider, J. and Kelm, K.
MATERIALS SCIENCE FORUM. Volume: 750 (2013) - 2013 • 63
Ferritic stainless steels for high-temperature applications: Stabilization of the microstructure by solid state precipitation of MX carbonitrides
Nabiran, N. and Weber, S. and Theisen, W.
HIGH TEMPERATURE MATERIALS AND PROCESSES. Volume: 32 (2013) - 2012 • 62
Novel temperature dependent tensile test of freestanding copper thin film structures
Smolka, M. and Motz, C. and Detzel, T. and Robl, W. and Griesser, T. and Wimmer, A. and Dehm, G.
REVIEW OF SCIENTIFIC INSTRUMENTS. Volume: 83 (2012) - 2012 • 61
The mechanical shear behavior of Al single crystals and grain boundaries
Pang, X. and Ahmed, N. and Janisch, R. and Hartmaier, A.
JOURNAL OF APPLIED PHYSICS. Volume: 112 (2012) - 2012 • 60
Chemically modified jute fibre reinforced non-pressure (NP) concrete pipes with improved mechanical properties
Kundu, S.P. and Chakraborty, S. and Roy, A. and Adhikari, B. and Majumder, S.B.
CONSTRUCTION AND BUILDING MATERIALS. Volume: 37 (2012) - 2012 • 59
Rapid alloy prototyping: Compositional and thermo-mechanical high throughput bulk combinatorial design of structural materials based on the example of 30Mn-1.2C-xAl triplex steels
Springer, H. and Raabe, D.
ACTA MATERIALIA. Volume: 60 (2012) - 2012 • 58
Polycrystal model of the mechanical behavior of a Mo-TiC 30 vol.% metal-ceramic composite using a three-dimensional microstructure map obtained by dual beam focused ion beam scanning electron microscopy
Cédat, D. and Fandeur, O. and Rey, C. and Raabe, D.
ACTA MATERIALIA. Volume: 60 (2012) - 2012 • 57
Friction-stir dissimilar welding of aluminium alloy to high strength steels: Mechanical properties and their relation to microstructure
Coelho, R.S. and Kostka, A. and dos Santos, J.F. and Kaysser-Pyzalla, A.
MATERIALS SCIENCE AND ENGINEERING A. Volume: 556 (2012) - 2012 • 56
Robust mechanical performance of chromium-coated polyethylene terephthalate over a broad range of conditions
Cordill, M.J. and Taylor, A.A. and Berger, J. and Schmidegg, K. and Dehm, G.
PHILOSOPHICAL MAGAZINE. Volume: 92 (2012) - 2012 • 55
In-Situ TEM Straining Experiments: Recent Progress in Stages and Small-Scale Mechanics
Dehm, G. and Legros, M. and Kiener, D.
IN-SITU ELECTRON MICROSCOPY: APPLICATIONS IN PHYSICS, CHEMISTRY AND MATERIALS SCIENCE. Volume: (2012) - 2012 • 54
Modification of pineapple leaf fibers and graft copolymerization of acrylonitrile onto modified fibers
Maniruzzaman, M. and Rahman, M.A. and Gafur, M.A. and Fabritius, H. and Raabe, D.
JOURNAL OF COMPOSITE MATERIALS. Volume: 46 (2012) - 2012 • 53
Do cement nanotubes exist?
Manzano, H. and Enyashin, A.N. and Dolado, J.S. and Ayuela, A. and Frenzel, J. and Seifert, G.
ADVANCED MATERIALS. Volume: 24 (2012) - 2012 • 52
A micromechanical damage simulation of dual phase steels using XFEM
Vajragupta, N. and Uthaisangsuk, V. and Schmaling, B. and Münstermann, S. and Hartmaier, A. and Bleck, W.
COMPUTATIONAL MATERIALS SCIENCE. Volume: 54 (2012) - 2012 • 51
Improvement in mechanical properties of jute fibres through mild alkali treatment as demonstrated by utilisation of the Weibull distribution model
Roy, A. and Chakraborty, S. and Kundu, S.P. and Basak, R.K. and Basu Majumder, S. and Adhikari, B.
BIORESOURCE TECHNOLOGY. Volume: 107 (2012) - 2012 • 50
Structure, composition, and mechanical properties of shark teeth
Enax, J. and Prymak, O. and Raabe, D. and Epple, M.
JOURNAL OF STRUCTURAL BIOLOGY. Volume: 178 (2012) - 2012 • 49
Correlation of structure, composition and local mechanical properties in the dorsal carapace of the edible crab cancer pagurus
Fabritius, H.-O. and Karsten, E.S. and Balasundaram, K. and Hild, S. and Huemer, K. and Raabe, D.
ZEITSCHRIFT FUR KRISTALLOGRAPHIE. Volume: 227 (2012) - 2012 • 48
Impact of heat treatment on the mechanical properties of AISI 304L austenitic stainless steel in high-pressure hydrogen gas
Weber, S. and Martin, M. and Theisen, W.
JOURNAL OF MATERIALS SCIENCE. Volume: 47 (2012) - 2012 • 47
Crystal chemistry and properties of mullite-type Bi 2M 4O 9: An overview
Schneider, H. and Fischer, R.X. and Gesing, T.M. and Schreuer, J. and Mühlberg, M.
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH. Volume: 103 (2012) - 2012 • 46
Mechanical properties of (20-30)Mn12Cr(0.56-0.7)CN corrosion resistant austenitic TWIP steels
Mújica Roncery, L. and Weber, S. and Theisen, W.
STEEL RESEARCH INTERNATIONAL. Volume: 83 (2012) - 2012 • 45
Influence of laves phase precipitation and coarsening on high-temperature strength of ferritic stainless steels
Nabiran, N. and Weber, S. and Theisen, W.
STEEL RESEARCH INTERNATIONAL. Volume: 83 (2012) - 2012 • 44
Expected and unexpected plastic behavior at the micron scale: An in situ μlaue tensile study
Kirchlechner, C. and Imrich, P.J. and Grosinger, W. and Kapp, M.W. and Keckes, J. and Micha, J.S. and Ulrich, O. and Thomas, O. and Labat, S. and Motz, C. and Dehm, G.
ACTA MATERIALIA. Volume: 60 (2012) - 2012 • 43
Atomic scale effects of alloying, partitioning, solute drag and austempering on the mechanical properties of high-carbon bainitic-austenitic TRIP steels
Seol, J.-B. and Raabe, D. and Choi, P.-P. and Im, Y.-R. and Park, C.-G.
ACTA MATERIALIA. Volume: 60 (2012) - 2011 • 42
Mechanical properties of thermally sprayed Fe based coatings
Röttger, A. and Weber, S. and Theisen, W. and Rajasekeran, B. and Vassen, R.
MATERIALS SCIENCE AND TECHNOLOGY. Volume: 27 (2011) - 2011 • 41
The relation between shear banding, microstructure and mechanical properties in Mg and Mg-Y alloys
Sandlöbes, S. and Schestakow, I. and Yi, S. and Zaefferer, S. and Chen, J. and Friák, M. and Neugebauer, J. and Raabe, D.
MATERIALS SCIENCE FORUM. Volume: 690 (2011) - 2011 • 40
Anisotropic mechanical behavior of ultrafine eutectic TiFe cast under non-equilibrium conditions
Schlieter, A. and Kühn, U. and Eckert, J. and Löser, W. and Gemming, T. and Friák, M. and Neugebauer, J.
INTERMETALLICS. Volume: 19 (2011) - 2011 • 39
Studies on the cycling, processing and programming of an industrially applicable shape memory polymer Tecoflex® (or TFX EG 72D)
Schmidt, C. and Chowdhury, A.M.S. and Neuking, K. and Eggeler, G.
HIGH PERFORMANCE POLYMERS. Volume: 23 (2011) - 2011 • 38
Experimental and numerical study on geometrically necessary dislocations and non-homogeneous mechanical properties of the ferrite phase in dual phase steels
Kadkhodapour, J. and Schmauder, S. and Raabe, D. and Ziaei-Rad, S. and Weber, U. and Calcagnotto, M.
ACTA MATERIALIA. Volume: 59 (2011) - 2011 • 37
Improvement of NiTi shape memory actuator performance through ultra-fine grained and nanocrystalline microstructures
Frenzel, J. and Burow, J.A. and Payton, E.J. and Rezanka, S. and Eggeler, G.
ADVANCED ENGINEERING MATERIALS. Volume: 13 (2011) - 2011 • 36
Development and characterization of novel corrosion-resistant TWIP steels
Mujica, L. and Weber, S. and Hunold, G. and Theisen, W.
STEEL RESEARCH INTERNATIONAL. Volume: 82 (2011) - 2011 • 35
Determining the elasticity of materials employing quantum-mechanical approaches from the electronic ground state to the limits of materials stability
Friák, M. and Hickel, T. and Körmann, F. and Udyansky, A. and Dick, A. and Von Pezold, J. and Ma, D. and Kim, O. and Counts, W.A. and Šob, M. and Gebhardt, T. and Music, D. and Schneider, J. and Raabe, D. and Neugebauer, J.
STEEL RESEARCH INTERNATIONAL. Volume: 82 (2011) - 2011 • 34
Influence of intermetallic precipitates and heat treatment on the mechanical properties of high-temperature corrosion resistant ferritic steels
Nabiran, N. and Weber, S. and Theisen, W.
PROCEDIA ENGINEERING. Volume: 10 (2011) - 2011 • 33
Analysis of the plastic anisotropy and pre-yielding of (γ/ α2)-phase titanium aluminide microstructures by crystal plasticity simulation
Zambaldi, C. and Roters, F. and Raabe, D.
INTERMETALLICS. Volume: 19 (2011) - 2011 • 32
High-throughput characterization of mechanical properties of Ti-Ni-Cu shape memory thin films at elevated temperature
Zarnetta, R. and Kneip, S. and Somsen, C. and Ludwig, Al.
MATERIALS SCIENCE AND ENGINEERING A. Volume: 528 (2011) - 2011 • 31
Recrystallization and grain growth in ultrafine-grained materials produced by high pressure torsion
Khorashadizadeh, A. and Raabe, D. and Winning, M. and Pippan, R.
ADVANCED ENGINEERING MATERIALS. Volume: 13 (2011) - 2011 • 30
Robustness and optimal use of design principles of arthropod exoskeletons studied by ab initio-based multiscale simulations
Nikolov, S. and Fabritius, H. and Petrov, M. and Friák, M. and Lymperakis, L. and Sachs, C. and Raabe, D. and Neugebauer, J.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS. Volume: 4 (2011) - 2011 • 29
Hot Direct Extrusion of Abrasion Resistant Fe-Base Metal Matrix Composites-Interface Characterization and Mechanical Properties of Co-Extruded Layered Structures
Silva, P.A. and Weber, S. and Karlsohn, M. and Röttger, A. and Theisen, W. and Reimers, W. and Pyzalla, A.R.
FRICTION, WEAR AND WEAR PROTECTION: INTERNATIONAL SYMPOSIUM ON FRICTION, WEAR AND WEAR PROTECTION 2008 AACHEN, GERMANY. Volume: (2011) - 2011 • 28
The evolution of laminates in finite crystal plasticity: A variational approach
Kochmann, D.M. and Hackl, K.
CONTINUUM MECHANICS AND THERMODYNAMICS. Volume: 23 (2011) - 2011 • 27
Influence of intermetallic phases and Kirkendall-porosity on the mechanical properties of joints between steel and aluminium alloys
Springer, H. and Kostka, A. and dos Santos, J.F. and Raabe, D.
MATERIALS SCIENCE AND ENGINEERING A. Volume: 528 (2011) - 2011 • 26
Deformation and fracture mechanisms in fine- and ultrafine-grained ferrite/martensite dual-phase steels and the effect of aging
Calcagnotto, M. and Adachi, Y. and Ponge, D. and Raabe, D.
ACTA MATERIALIA. Volume: 59 (2011) - 2011 • 25
The collagen fibril architecture in the lamina cribrosa and peripapillary sclera predicted by a computational remodeling approach
Grytz, R. and Meschke, G. and Jonas, J.B.
BIOMECHANICS AND MODELING IN MECHANOBIOLOGY. Volume: 10 (2011) - 2011 • 24
Microstructure evolution and mechanical properties of an intermetallic Ti-43.5Al-4Nb-1Mo-0.1B alloy after ageing below the eutectoid temperature
Cha, L. and Clemens, H. and Dehm, G.
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH. Volume: 102 (2011) - 2010 • 23
Nanoindentation of a pseudoelastic NiTiFe shape memory alloy
Pfetzing-Micklich, J. and Wagner, M.F.-X. and Zarnetta, R. and Frenzel, J. and Eggeler, G. and Markaki, A.E. and Wheeler, J. and Clyne, T.W.
ADVANCED ENGINEERING MATERIALS. Volume: 12 (2010) - 2010 • 22
A computational remodeling approach to predict the physiological architecture of the collagen fibril network in corneo-scleral shells
Grytz, R. and Meschke, G.
BIOMECHANICS AND MODELING IN MECHANOBIOLOGY. Volume: 9 (2010) - 2010 • 21
Microstructural and mechanical study of an Al matrix composite reinforced by Al-Cu-Fe Icosahedral particles
Laplanche, G. and Joulain, A. and Bonneville, J. and Gauthier-Brunet, V. and Dubois, S. and El Kabir, T.
JOURNAL OF MATERIALS RESEARCH. Volume: 25 (2010) - 2010 • 20
Microstructures and mechanical properties of Al-base composite materials reinforced by Al-Cu-Fe particles
Laplanche, G. and Joulain, A. and Bonneville, J. and Schaller, R. and El Kabir, T.
JOURNAL OF ALLOYS AND COMPOUNDS. Volume: 493 (2010) - 2010 • 19
Where Does the Lithium Go? - A Study of the Precipitates in the Stir Zone of a Friction Stir Weld in a Li-containing 2xxx Series Al Alloy
Rao, J.C. and Payton, E.J. and Somsen, C. and Neuking, K. and Eggeler, G. and Kostka, A. and Dos Santos, J.F.
ADVANCED ENGINEERING MATERIALS. Volume: 12 (2010) - 2010 • 18
The exoskeleton of the American lobster- From texture to anisotropic properties
Raue, L. and Klein, H. and Raabe, D.
SOLID STATE PHENOMENA. Volume: 160 (2010) - 2010 • 17
Effect of grain refinement to 1μm on strength and toughness of dual-phase steels
Calcagnotto, M. and Ponge, D. and Raabe, D.
MATERIALS SCIENCE AND ENGINEERING A. Volume: 527 (2010) - 2010 • 16
Synthesis and characterization of lamellar and fibre-reinforced NiAl-Mo and NiAl-Cr
Haenschke, T. and Gali, A. and Heilmaier, M. and Krüger, M. and Bei, H. and George, E.P.
JOURNAL OF PHYSICS: CONFERENCE SERIES. Volume: 240 (2010) - 2010 • 15
A review of crystallographic textures in chemical vapor-deposited diamond films
Liu, T. and Raabe, D. and Mao, W.-M.
SIGNAL, IMAGE AND VIDEO PROCESSING. Volume: 4 (2010) - 2010 • 14
Synthesis of defect-free single-phase bars of high-melting Laves phases through modified cold crucible levitation melting
Voß, S. and Stein, F. and Palm, M. and Raabe, D.
MATERIALS SCIENCE AND ENGINEERING A. Volume: 527 (2010) - 2010 • 13
Using Ab initio calculations in designing bcc MgLi-X alloys for ultra-lightweight applications
Counts, W.A. and Friák, M. and Raabe, D. and Neugebauer, J.
ADVANCED ENGINEERING MATERIALS. Volume: 12 (2010) - 2010 • 12
Ab Initio guided design of bcc ternary Mg-Li-X (X=Ca, Al, Si, Zn, Cu) alloys for ultra-lightweight applications
Counts, W.A. and Friák, M. and Raabe, D. and Neugebauer, J.
ADVANCED ENGINEERING MATERIALS. Volume: 12 (2010) - 2010 • 11
EBSD study of substructure and texture formation in dual-phase steel sheets for semi-finished products
Masimov, M. and Peranio, N. and Springub, B. and Roters, F. and Raabe, D.
SOLID STATE PHENOMENA. Volume: 160 (2010) - 2010 • 10
Anodic oxides on a beta type Nb-Ti alloy and their characterization by electrochemical impedance spectroscopy
Woldemedhin, M.T. and Raabe, D. and Hassel, A.W.
PHYSICA STATUS SOLIDI (A) APPLICATIONS AND MATERIALS SCIENCE. Volume: 207 (2010) - 2010 • 9
Crystal plasticity modelling and experiments for deriving microstructure-property relationships in γ-TiAl based alloys
Zambaldi, C. and Raabe, D.
JOURNAL OF PHYSICS: CONFERENCE SERIES. Volume: 240 (2010) - 2010 • 8
Microstructure and mechanical properties of laser-welded joints of TWIP and TRIP steels
Mujica, L. and Weber, S. and Pinto, H. and Thomy, C. and Vollertsen, F.
MATERIALS SCIENCE AND ENGINEERING A. Volume: 527 (2010) - 2010 • 7
Plastic anisotropy of γ-TiAl revealed by axisymmetric indentation
Zambaldi, C. and Raabe, D.
ACTA MATERIALIA. Volume: 58 (2010) - 2010 • 6
Numerical investigation of room-temperature deformation behavior of a duplex type γtiAl alloy using a multi-scale modeling approach
Kabir, M.R. and Chernova, L. and Bartsch, M.
ACTA MATERIALIA. Volume: 58 (2010) - 2010 • 5
Modeling of hot ductility during solidification of steel grades in continuous casting - Part I
Senk, D. and Stratemeier, S. and Böttger, B. and Göhler, K. and Steinbach, I.
ADVANCED ENGINEERING MATERIALS. Volume: 12 (2010) - 2010 • 4
Effects of annealing on the microstructure and the mechanical properties of EB-PVD thermal barrier coatings
Zotov, N. and Bartsch, M. and Chernova, L. and Schmidt, D.A. and Havenith, M. and Eggeler, G.
SURFACE AND COATINGS TECHNOLOGY. Volume: 205 (2010) - 2010 • 3
Revealing the design principles of high-performance biological composites using Ab initio and multiscale simulations: The example of lobster cuticle
Nikolov, S. and Petrov, M. and Lymperakis, L. and Friák, M. and Sachs, C. and Fabritius, H.-O. and Raabe, D. and Neugebauer, J.
ADVANCED MATERIALS. Volume: 22 (2010) - 2010 • 2
Evaluation of factors influencing deep cryogenic treatment that affect the properties of tool steels
Oppenkowski, A. and Weber, S. and Theisen, W.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY. Volume: 210 (2010) - 2009 • 1
Characterization of the mechanical properties of ultra-fine grained NiTiCr-wires
Frotscher, M. and Burow, J. and Schön, P. and Neuking, K. and Böckmann, R. and Eggeler, G.
MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK. Volume: 40 (2009)