- Ruhr-Universität Bochum
Scientific output
Publications
Below, you can either scroll through the complete list of our annually published research in peer-reviewed journals or search for a specific author or keyword via the free text search.
- 2023 • 177
On the role of potassium in Prussian blue analogue-derived Mn-Co catalysts applied in the CO hydrogenation to higher alcohols
Telaar, P. and Diehl, P. and Herrendorf, T. and Schaefer, S. and Kleist, W. and Muhler, M.
CATALYSIS SCIENCE AND TECHNOLOGY. Volume: 13 (2023) - 2023 • 176
Investigating the microplastic behavior of hierarchical polycrystalline γ-TiAl microstructures
Motahari, S. and Chauniyal, A. and Janisch, R.
COMPUTATIONAL MATERIALS SCIENCE. Volume: 226 (2023) - 2023 • 175
Multi-phase field modeling and simulation of magnetically driven grain boundary migration in SmCo polycrystals
Huo, L. and Schiedung, R. and Li, H. and Wang, G. and Hong, Y. and Grünebohm, A. and Steinbach, I.
JOURNAL OF PHYSICS D: APPLIED PHYSICS. Volume: 56 (2023) - 2023 • 174
Mechanical properties and thermal stability of ZrCuAlx thin film metallic glasses: Experiments and first-principle calculations
Poltronieri, C. and Brognara, A. and Bignoli, F. and Evertz, S. and Djemia, P. and Faurie, D. and Challali, F. and Li, C.H. and Belliard, L. and Dehm, G. and Best, J.P. and Ghidelli, M.
ACTA MATERIALIA. Volume: 258 (2023) - 2023 • 173
Hardening effect of diffusible hydrogen on BCC Fe-based model alloys by in situ backside hydrogen charging
Rao, J. and Lee, S. and Dehm, G. and Duarte, M. J.
MATERIALS AND DESIGN. Volume: 232 (2023) - 2023 • 172
How Coherent and Semi-Coherent Interfaces Govern Dislocation Nucleation in Lamellar TiAl Alloys
Chauniyal, A. and Janisch, R.
ADVANCED ENGINEERING MATERIALS. Volume: 25 (2023) - 2023 • 171
Off-stoichiometric softening and polytypic transformations in the plastic deformation of the C14 Fe2Nb Laves phase
Ladines, A.N. and Drautz, R. and Hammerschmidt, T.
ACTA MATERIALIA. Volume: 260 (2023) - 2023 • 170
Electronic correlations and superconducting instability in La3Ni2 O7 under high pressure
Lechermann, F. and Gondolf, J. and Bötzel, S. and Eremin, I. M.
PHYSICAL REVIEW B. Volume: 108 (2023) - 2023 • 169
Magnetic bond-order potential for iron-cobalt alloys
Egorov, A. and Subramanyam, A. P. A. and Yuan, Z. and Drautz, R. and Hammerschmidt, T.
PHYSICAL REVIEW MATERIALS. Volume: 7 (2023) - 2022 • 168
Influence of a Partial Substitution of Co by Fe on the Phase Stability and Fatigue Behavior of a CoCrWC Hard Alloy at Room Temperature
Brackmann, L. and Schuppener, J. and Röttger, A. and Weber, S.
METALLURGICAL AND MATERIALS TRANSACTIONS A: PHYSICAL METALLURGY AND MATERIALS SCIENCE. Volume: 53 (2022) - 2022 • 167
A single-Pt-atom-on-Ru-nanoparticle electrocatalyst for CO-resilient methanol oxidation
Poerwoprajitno, A.R. and Gloag, L. and Watt, J. and Cheong, S. and Tan, X. and Lei, H. and Tahini, H.A. and Henson, A. and Subhash, B. and Bedford, N.M. and Miller, B.K. and O’Mara, P.B. and Benedetti, T.M. and Huber, D.L. and Zhang, W. and Smith, S.C. and Gooding, J.J. and Schuhmann, W. and Tilley, R.D.
NATURE CATALYSIS. Volume: 5 (2022) - 2022 • 166
Strain rate dependent deformation behavior of BCC-structured Ti29Zr24Nb23Hf24 high entropy alloy at elevated temperatures
Cao, T. and Guo, W. and Lu, W. and Xue, Y. and Lu, W. and Su, J. and Liebscher, C.H. and Li, C. and Dehm, G.
JOURNAL OF ALLOYS AND COMPOUNDS. Volume: 891 (2022) - 2022 • 165
High-pressure CO, H2, CO2 and Ethylene Pulses Applied in the Hydrogenation of CO to Higher Alcohols over a Bulk Co-Cu Catalyst
Telaar, P. and Schwiderowski, P. and Schmidt, S. and Stürmer, S. and Muhler, M.
CHEMCATCHEM. Volume: 14 (2022) - 2022 • 164
Microstructure and residual stress evolution in nanocrystalline Cu-Zr thin films
Chakraborty, J. and Oellers, T. and Raghavan, R. and Ludwig, A. and Dehm, G.
JOURNAL OF ALLOYS AND COMPOUNDS. Volume: 896 (2022) - 2022 • 163
Combinatorial sputter deposition of CrMnFeCoNi high entropy alloy thin films on agitated particles
Lourens, F. and Ludwig, Al.
SURFACE AND COATINGS TECHNOLOGY. Volume: 449 (2022) - 2022 • 162
Elastic energy of multi-component solid solutions and strain origins of phase stability in high-entropy alloys
Darvishi Kamachali, R. and Wang, L.
SCRIPTA MATERIALIA. Volume: 206 (2022) - 2022 • 161
Electrochemical dealloying in a magnetic field – Tapping the potential for catalyst and material design
Rurainsky, C. and Nettler, D.-R. and Pahl, T. and Just, A. and Cignoni, P. and Kanokkanchana, K. and Tschulik, K.
ELECTROCHIMICA ACTA. Volume: 426 (2022) - 2022 • 160
Effect of laser shock peening without protective coating on the surface mechanical properties of NiTi alloy
Wang, H. and Keller, S. and Chang, Y. and Kashaev, N. and Yan, K. and Gurevich, E.L. and Ostendorf, A.
JOURNAL OF ALLOYS AND COMPOUNDS. Volume: 896 (2022) - 2022 • 159
MEAM interatomic potentials of Ni, Re, and Ni-Re alloys for atomistic fracture simulations
Alam, M. and Lymperakis, L. and Groh, S. and Neugebauer, J.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING. Volume: 30 (2022) - 2022 • 158
Weak itinerant magnetic phases of La2Ni7
Wilde, J.M. and Sapkota, A. and Tian, W. and Bud'Ko, S.L. and Ribeiro, R.A. and Kreyssig, A. and Canfield, P.C.
PHYSICAL REVIEW B. Volume: 106 (2022) - 2022 • 157
Pseudoelastic cycling of ultra-fine-grained NiTi shape-memory wires
Yawny, A. and Sade, M. and Eggeler, G.
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH. Volume: 96 (2022) - 2022 • 156
Unravelling the lamellar size-dependent fracture behavior of fully lamellar intermetallic γ-TiAl
Neogi, A. and Janisch, R.
ACTA MATERIALIA. Volume: 227 (2022) - 2022 • 155
Revealing in-plane grain boundary composition features through machine learning from atom probe tomography data
Zhou, X. and Wei, Y. and Kühbach, M. and Zhao, H. and Vogel, F. and Darvishi Kamachali, R. and Thompson, G.B. and Raabe, D. and Gault, B.
ACTA MATERIALIA. Volume: 226 (2022) - 2022 • 154
Integration of Hot Isostatic Pressing and Heat Treatment for Advanced Modified γ-TiAl TNM Alloys
Bernal, D. and Chamorro, X. and Hurtado, I. and Lopez-Galilea, I. and Bürger, D. and Weber, S. and Madariaga, I.
MATERIALS. Volume: 15 (2022) - 2022 • 153
Linear growth of reaction layer during in-situ TEM annealing of thin film Al/Ni diffusion couples
Kostka, A. and Naujoks, D. and Oellers, T. and Salomon, S. and Somsen, C. and Öztürk, E. and Savan, A. and Ludwig, A. and Eggeler, G.
JOURNAL OF ALLOYS AND COMPOUNDS. Volume: 922 (2022) - 2022 • 152
Ab initio investigations of point and complex defect structures in B2-FeAl
Sözen, H.I. and Mendive-Tapia, E. and Hickel, T. and Neugebauer, J.
PHYSICAL REVIEW MATERIALS. Volume: 6 (2022) - 2021 • 151
Elemental segregation to lattice defects in the CrMnFeCoNi high-entropy alloy during high temperature exposures
Heczko, M. and Mazánová, V. and Gröger, R. and Záležák, T. and Hooshmand, M.S. and George, E.P. and Mills, M.J. and Dlouhý, A.
ACTA MATERIALIA. Volume: 208 (2021) - 2021 • 150
Gd-Ru Nanoparticles Supported on Zr0.5Ce0.5O2Nanorods for Dry Methane Reforming
Das, S. and Sengupta, M. and Bag, A. and Saini, A. and Muhler, M. and Bordoloi, A.
ACS APPLIED NANO MATERIALS. Volume: 4 (2021) - 2021 • 149
Properties of α-Brass Nanoparticles II: Structure and Composition
Weinreich, J. and Paleico, M.L. and Behler, J.
JOURNAL OF PHYSICAL CHEMISTRY C. Volume: 125 (2021) - 2021 • 148
Mechanochemical Synthesis of Supported Bimetallic Catalysts
De Bellis, J. and Felderhoff, M. and Schüth, F.
CHEMISTRY OF MATERIALS. Volume: 33 (2021) - 2021 • 147
Evidence for a large Rashba splitting in PtPb4 from angle-resolved photoemission spectroscopy
Lee, K. and Mou, D. and Jo, N.H. and Wu, Y. and Schrunk, B. and Wilde, J.M. and Kreyssig, A. and Estry, A. and Bud'Ko, S.L. and Nguyen, M.C. and Wang, L.-L. and Wang, C.-Z. and Ho, K.-M. and Canfield, P.C. and Kaminski, A.
PHYSICAL REVIEW B. Volume: 103 (2021) - 2021 • 146
Influence of crystalline defects on magnetic nanodomains in a rare-earth-free magnetocrystalline anisotropic alloy
Palanisamy, D. and Kovács, A. and Hegde, O. and Dunin-Borkowski, R.E. and Raabe, D. and Hickel, T. and Gault, B.
PHYSICAL REVIEW MATERIALS. Volume: 5 (2021) - 2021 • 145
Laboratory-Scale Processing and Performance Assessment of Ti–Ta High-Temperature Shape Memory Spring Actuators
Paulsen, A. and Dumlu, H. and Piorunek, D. and Langenkämper, D. and Frenzel, J. and Eggeler, G.
SHAPE MEMORY AND SUPERELASTICITY. Volume: 7 (2021) - 2021 • 144
Bayesian Optimization of High-Entropy Alloy Compositions for Electrocatalytic Oxygen Reduction**
Pedersen, J.K. and Clausen, C.M. and Krysiak, O.A. and Xiao, B. and Batchelor, T.A.A. and Löffler, T. and Mints, V.A. and Banko, L. and Arenz, M. and Savan, A. and Schuhmann, W. and Ludwig, Al. and Rossmeisl, J.
ANGEWANDTE CHEMIE - INTERNATIONAL EDITION. Volume: 60 (2021) - 2021 • 143
In situ nanoindentation during electrochemical hydrogen charging: a comparison between front-side and a novel back-side charging approach
Duarte, M.J. and Fang, X. and Rao, J. and Krieger, W. and Brinckmann, S. and Dehm, G.
JOURNAL OF MATERIALS SCIENCE. Volume: 56 (2021) - 2021 • 142
Faceting diagram for Ag segregation induced nanofaceting at an asymmetric Cu tilt grain boundary
Peter, N.J. and Duarte, M.J. and Kirchlechner, C. and Liebscher, C.H. and Dehm, G.
ACTA MATERIALIA. Volume: 214 (2021) - 2021 • 141
Spinodal Decomposition in Nanocrystalline Alloys
Zhou, X. and Darvishi Kamachali, R. and Boyce, B.L. and Clark, B.G. and Raabe, D. and Thompson, G.B.
ACTA MATERIALIA. Volume: 215 (2021) - 2021 • 140
The hidden structure dependence of the chemical life of dislocations
Zhou, X. and Mianroodi, J.R. and Da Silva, A.K. and Koenig, T. and Thompson, G.B. and Shanthraj, P. and Ponge, D. and Gault, B. and Svendsen, B. and Raabe, D.
SCIENCE ADVANCES. Volume: 7 (2021) - 2021 • 139
3d transition-metal high-entropy Invar alloy developed by adjusting the valence-electron concentration
Rao, Z. and Cąklr, A. and Özgün, Ö. and Ponge, D. and Raabe, D. and Li, Z. and Acet, M.
PHYSICAL REVIEW MATERIALS. Volume: 5 (2021) - 2021 • 138
Simulation of the θ’ precipitation process with interfacial anisotropy effects in Al-Cu alloys
Ta, N. and Bilal, M.U. and Häusler, I. and Saxena, A. and Lin, Y.-Y. and Schleifer, F. and Fleck, M. and Glatzel, U. and Skrotzki, B. and Kamachali, R.D.
MATERIALS. Volume: 14 (2021) - 2021 • 137
Calibrating SECCM measurements by means of a nanoelectrode ruler. The intrinsic oxygen reduction activity of PtNi catalyst nanoparticles
Tetteh, E.B. and Löffler, T. and Tarnev, T. and Quast, T. and Wilde, P. and Aiyappa, H.B. and Schumacher, S. and Andronescu, C. and Tilley, R.D. and Chen, X. and Schuhmann, W.
NANO RESEARCH. Volume: (2021) - 2021 • 136
Nitrogen and Oxygen Functionalization of Multi-walled Carbon Nanotubes for Tuning the Bifunctional Oxygen Reduction/Oxygen Evolution Performance of Supported FeCo Oxide Nanoparticles
Kazakova, M.A. and Koul, A. and Golubtsov, G.V. and Selyutin, A.G. and Ishchenko, A.V. and Kvon, R.I. and Kolesov, B.A. and Schuhmann, W. and Morales, D.M.
CHEMELECTROCHEM. Volume: (2021) - 2021 • 135
Phase-field modeling of chemoelastic binodal/spinodal relations and solute segregation to defects in binary alloys
Mianroodi, J.R. and Shanthraj, P. and Svendsen, B. and Raabe, D.
MATERIALS. Volume: 14 (2021) - 2021 • 134
Phase decomposition in nanocrystalline Cr0.8Cu0.2 thin films
Chakraborty, J. and Harzer, T.P. and Duarte, M.J. and Dehm, G.
JOURNAL OF ALLOYS AND COMPOUNDS. Volume: 888 (2021) - 2021 • 133
A combined experimental and first-principles based assessment of finite-temperature thermodynamic properties of intermetallic al3sc
Gupta, A. and Tas, B. and Korbmacher, D. and Dutta, B. and Neitzel, Y. and Grabowski, B. and Hickel, T. and Esin, V. and Divinski, S.V. and Wilde, G. and Neugebauer, J.
MATERIALS. Volume: 14 (2021) - 2021 • 132
Electrocatalytic oxidation of 2-propanol on PtxIr100-x bifunctional electrocatalysts – A thin-film materials library study
Kormányos, A. and Savan, A. and Ludwig, Al. and Speck, F.D. and Mayrhofer, K.J.J. and Cherevko, S.
JOURNAL OF CATALYSIS. Volume: 396 (2021) - 2021 • 131
Ab initio based models for temperature-dependent magnetochemical interplay in bcc Fe-Mn alloys
Schneider, A. and Fu, C.-C. and Waseda, O. and Barreteau, C. and Hickel, T.
PHYSICAL REVIEW B. Volume: 103 (2021) - 2021 • 130
CrMnFeCoNi high entropy alloys with carbon and nitrogen: mechanical properties, wear and corrosion resistance
Chmielak, L. and Mujica Roncery, L. and Niederhofer, P. and Weber, S. and Theisen, W.
SN APPLIED SCIENCES. Volume: 3 (2021) - 2021 • 129
Orientation-dependent plastic deformation mechanisms and competition with stress-induced phase transformation in microscale NiTi
Choi, W.S. and Pang, E.L. and Ko, W.-S. and Jun, H. and Bong, H.J. and Kirchlechner, C. and Raabe, D. and Choi, P.-P.
ACTA MATERIALIA. Volume: 208 (2021) - 2021 • 128
Twin-boundary assisted crack tip plasticity and toughening in lamellar γ-TiAl
Neogi, A. and Janisch, R.
ACTA MATERIALIA. Volume: 213 (2021) - 2021 • 127
Discovery and Implications of Hidden Atomic-Scale Structure in a Metallic Meteorite
Kovács, A. and Lewis, L.H. and Palanisamy, D. and Denneulin, T. and Schwedt, A. and Scott, E.R.D. and Gault, B. and Raabe, D. and Dunin-Borkowski, R.E. and Charilaou, M.
NANO LETTERS. Volume: 21 (2021) - 2021 • 126
Incorporating elasticity into CALPHAD-informed density-based grain boundary phase diagrams reveals segregation transition in Al-Cu and Al-Cu-Mg alloys
Wang, L. and Darvishi Kamachali, R.
COMPUTATIONAL MATERIALS SCIENCE. Volume: 199 (2021) - 2021 • 125
Application of nanoindentation technique to test surface hardness and residual stress of NiTi alloy after femtosecond laser shock peening
Wang, H. and Gurevich, E.L. and Ostendorf, A.
PROCEEDINGS OF SPIE - THE INTERNATIONAL SOCIETY FOR OPTICAL ENGINEERING. Volume: 11679 (2021) - 2021 • 124
CrOx-Mediated Performance Enhancement of Ni/NiO-Mg:SrTiO3in Photocatalytic Water Splitting
Han, K. and Haiber, D.M. and Knöppel, J. and Lievens, C. and Cherevko, S. and Crozier, P. and Mul, G. and Mei, B.
ACS CATALYSIS. Volume: 11 (2021) - 2020 • 123
Effects of Mo on the mechanical behavior of γ/γʹ-strengthened Co-Ti-based alloys
Im, H.J. and Lee, S. and Choi, W.S. and Makineni, S.K. and Raabe, D. and Ko, W.-S. and Choi, P.-P.
ACTA MATERIALIA. Volume: 197 (2020) - 2020 • 122
Unveiling the mechanism of abnormal magnetic behavior of FeNiCoMnCu high-entropy alloys through a joint experimental-theoretical study
Rao, Z. and Dutta, B. and Körmann, F. and Ponge, D. and Li, L. and He, J. and Stephenson, L. and Schäfer, L. and Skokov, K. and Gutfleisch, O. and Raabe, D. and Li, Z.
PHYSICAL REVIEW MATERIALS. Volume: 4 (2020) - 2020 • 121
Beyond Solid Solution High-Entropy Alloys: Tailoring Magnetic Properties via Spinodal Decomposition
Rao, Z. and Dutta, B. and Körmann, F. and Lu, W. and Zhou, X. and Liu, C. and da Silva, A.K. and Wiedwald, U. and Spasova, M. and Farle, M. and Ponge, D. and Gault, B. and Neugebauer, J. and Raabe, D. and Li, Z.
ADVANCED FUNCTIONAL MATERIALS. Volume: (2020) - 2020 • 120
Micro-, macromechanical and aeroelastic investigation of glass - fiber based, lightweight turbomachinery components
Iseni, S. and Prasad, M.R.G. and Hartmaier, A. and Holeczek, K. and Modeler, N. and di Mare, F.
PROCEEDINGS OF THE ASME TURBO EXPO. Volume: 10A-2020 (2020) - 2020 • 119
Thermodynamic modelling of the Ni–Zr system
Jana, A. and Sridar, S. and Fries, S.G. and Hammerschmidt, T. and Kumar, K.C.H.
INTERMETALLICS. Volume: 116 (2020) - 2020 • 118
Crystal structure and composition dependence of mechanical properties of single-crystalline NbCo2 Laves phase
Luo, W. and Kirchlechner, C. and Zavašnik, J. and Lu, W. and Dehm, G. and Stein, F.
ACTA MATERIALIA. Volume: 184 (2020) - 2020 • 117
Composition dependence of hardness and elastic modulus of the cubic and hexagonal NbCo2 Laves phase polytypes studied by nanoindentation
Luo, W. and Kirchlechner, C. and Li, J. and Dehm, G. and Stein, F.
JOURNAL OF MATERIALS RESEARCH. Volume: 35 (2020) - 2020 • 116
Electrochemical dealloying as a tool to tune the porosity, composition and catalytic activity of nanomaterials
Rurainsky, C. and Manjón, A.G. and Hiege, F. and Chen, Y.-T. and Scheu, C. and Tschulik, K.
JOURNAL OF MATERIALS CHEMISTRY A. Volume: 8 (2020) - 2020 • 115
Comparison of cryogenic deformation of the concentrated solid solutions CoCrFeMnNi, CoCrNi and CoNi
Tirunilai, A.S. and Hanemann, T. and Reinhart, C. and Tschan, V. and Weiss, K.-P. and Laplanche, G. and Freudenberger, J. and Heilmaier, M. and Kauffmann, A.
MATERIALS SCIENCE AND ENGINEERING A. Volume: 783 (2020) - 2020 • 114
Nanoglass–Nanocrystal Composite—a Novel Material Class for Enhanced Strength–Plasticity Synergy
Katnagallu, S. and Wu, G. and Singh, S.P. and Nandam, S.H. and Xia, W. and Stephenson, L.T. and Gleiter, H. and Schwaiger, R. and Hahn, H. and Herbig, M. and Raabe, D. and Gault, B. and Balachandran, S.
SMALL. Volume: 16 (2020) - 2020 • 113
Structural evolution of bimetallic Co-Cu catalysts in CO hydrogenation to higher alcohols at high pressure
Göbel, C. and Schmidt, S. and Froese, C. and Fu, Q. and Chen, Y.-T. and Pan, Q. and Muhler, M.
JOURNAL OF CATALYSIS. Volume: 383 (2020) - 2020 • 112
The steady-state kinetics of CO hydrogenation to higher alcohols over a bulk Co-Cu catalyst
Göbel, C. and Schmidt, S. and Froese, C. and Bujara, T. and Viktor Scherer and Muhler, M.
JOURNAL OF CATALYSIS. Volume: (2020) - 2020 • 111
Trends in elastic properties of Ti-Ta alloys from first-principles calculations
Chakraborty, T. and Rogal, J.
JOURNAL OF PHYSICS CONDENSED MATTER. Volume: 33 (2020) - 2020 • 110
Influence of lattice misfit on the deformation behaviour of α2/γ lamellae in TiAl alloys
Chauniyal, A. and Janisch, R.
MATERIALS SCIENCE AND ENGINEERING A. Volume: 796 (2020) - 2020 • 109
Sintering and biocompatibility of blended elemental Ti-xNb alloys
Chen, Y. and Han, P. and Dehghan-Manshadi, A. and Kent, D. and Ehtemam-Haghighi, S. and Jowers, C. and Bermingham, M. and Li, T. and Cooper-White, J. and Dargusch, M.S.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS. Volume: 104 (2020) - 2020 • 108
The sum is more than its parts: stability of MnFe oxide nanoparticles supported on oxygen-functionalized multi-walled carbon nanotubes at alternating oxygen reduction reaction and oxygen evolution reaction conditions
Morales, D.M. and Kazakova, M.A. and Purcel, M. and Masa, J. and Schuhmann, W.
JOURNAL OF SOLID STATE ELECTROCHEMISTRY. Volume: 24 (2020) - 2020 • 107
Unfolding the complexity of phonon quasi-particle physics in disordered materials
Mu, S. and Olsen, R.J. and Dutta, B. and Lindsay, L. and Samolyuk, G.D. and Berlijn, T. and Specht, E.D. and Jin, K. and Bei, H. and Hickel, T. and Larson, B.C. and Stocks, G.M.
NPJ COMPUTATIONAL MATERIALS. Volume: 6 (2020) - 2020 • 106
Corrosion behavior of NiTi alloy subjected to femtosecond laser shock peening without protective coating in air environment
Wang, H. and Jürgensen, J. and Decker, P. and Hu, Z. and Yan, K. and Gurevich, E.L. and Ostendorf, A.
APPLIED SURFACE SCIENCE. Volume: 501 (2020) - 2020 • 105
Formation of a 2D Meta-stable Oxide by Differential Oxidation of AgCu Alloys
Schweinar, K. and Beeg, S. and Hartwig, C. and Rajamathi, C.R. and Kasian, O. and Piccinin, S. and Prieto, M.J. and Tanase, L.C. and Gottlob, D.M. and Schmidt, T. and Raabe, D. and Schlögl, R. and Gault, B. and Jones, T.E. and Greiner, M.T.
ACS APPLIED MATERIALS AND INTERFACES. Volume: 12 (2020) - 2020 • 104
Probing catalytic surfaces by correlative scanning photoemission electron microscopy and atom probe tomography
Schweinar, K. and Nicholls, R.L. and Rajamathi, C.R. and Zeller, P. and Amati, M. and Gregoratti, L. and Raabe, D. and Greiner, M. and Gault, B. and Kasian, O.
JOURNAL OF MATERIALS CHEMISTRY A. Volume: 8 (2020) - 2020 • 103
Surface modification of NiTi alloy by ultrashort pulsed laser shock peening
Wang, H. and Kalchev, Y. and Wang, H. and Yan, K. and Gurevich, E.L. and Ostendorf, A.
SURFACE AND COATINGS TECHNOLOGY. Volume: 394 (2020) - 2020 • 102
Structural stability of Co–V intermetallic phases and thermodynamic description of the Co–V system
Wang, P. and Hammerschmidt, T. and Kattner, U.R. and Olson, G.B.
CALPHAD: COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY. Volume: 68 (2020) - 2020 • 101
Microhardness and microabrasion behaviour of NiTi shape memory alloy after femtosecond laser shock peening without coating in air
Wang, H. and Gurevich, E.L. and Ostendorf, A.
PROCEEDINGS OF SPIE - THE INTERNATIONAL SOCIETY FOR OPTICAL ENGINEERING. Volume: 11273 (2020) - 2020 • 100
Femtosecond laser shock peening on the surface of NiTi shape memory alloy
Wang, H. and Gurevich, E.L. and Ostendorf, A.
PROCEDIA CIRP. Volume: 94 (2020) - 2020 • 99
Anisotropic failure behavior of ordered intermetallic TiAl alloys under pure mode-I loading
Neogi, A. and Alam, M. and Hartmaier, A. and Janisch, R.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING. Volume: 28 (2020) - 2020 • 98
A model for grain boundary thermodynamics
Darvishi Kamachali, R.
RSC ADVANCES. Volume: 10 (2020) - 2020 • 97
Trivalent iron rich CoFe layered oxyhydroxides for electrochemical water oxidation
Weiß, S. and Ertl, M. and Varhade, S.D. and Radha, A.V. and Schuhmann, W. and Breu, J. and Andronescu, C.
ELECTROCHIMICA ACTA. Volume: 350 (2020) - 2020 • 96
Atomic scale configuration of planar defects in the Nb-rich C14 Laves phase NbFe2
Šlapáková, M. and Zendegani, A. and Liebscher, C.H. and Hickel, T. and Neugebauer, J. and Hammerschmidt, T. and Ormeci, A. and Grin, J. and Dehm, G. and Kumar, K.S. and Stein, F.
ACTA MATERIALIA. Volume: 183 (2020) - 2020 • 95
Control of thermally stable core-shell nano-precipitates in additively manufactured Al-Sc-Zr alloys
Kürnsteiner, P. and Bajaj, P. and Gupta, A. and Wilms, M.B. and Weisheit, A. and Li, X. and Leinenbach, C. and Gault, B. and Jägle, E.A. and Raabe, D.
ADDITIVE MANUFACTURING. Volume: 32 (2020) - 2020 • 94
Effect of Oxygen on High-temperature Phase Equilibria in Ternary Ti-Al-Nb Alloys
Distl, B. and Dehm, G. and Stein, F.
ZEITSCHRIFT FUR ANORGANISCHE UND ALLGEMEINE CHEMIE. Volume: 646 (2020) - 2020 • 93
Deactivating deformation twinning in medium-entropy CrCoNi with small additions of aluminum and titanium
Slone, C.E. and LaRosa, C.R. and Zenk, C.H. and George, E.P. and Ghazisaeidi, M. and Mills, M.J.
SCRIPTA MATERIALIA. Volume: 178 (2020) - 2020 • 92
The importance of nanoscale confinement to electrocatalytic performance
Wordsworth, J. and Benedetti, T.M. and Alinezhad, A. and Tilley, R.D. and Edwards, M.A. and Schuhmann, W. and Gooding, J.J.
CHEMICAL SCIENCE. Volume: 11 (2020) - 2020 • 91
Influence of Ti3Ni4 precipitates on the indentation-induced two-way shape-memory effect in Nickel-Titanium
Laursen, C.M. and Peter, N.J. and Gerstein, G. and Maier, H.J. and Dehm, G. and Frick, C.P.
MATERIALS SCIENCE AND ENGINEERING A. Volume: 792 (2020) - 2020 • 90
Electroenzymatic Nitrogen Fixation Using a MoFe Protein System Immobilized in an Organic Redox Polymer
Lee, Y.S. and Ruff, A. and Cai, R. and Lim, K. and Schuhmann, W. and Minteer, S.D.
ANGEWANDTE CHEMIE - INTERNATIONAL EDITION. Volume: 59 (2020) - 2020 • 89
In Situ X-ray Microscopy Reveals Particle Dynamics in a NiCo Dry Methane Reforming Catalyst under Operating Conditions
Beheshti Askari, A. and Al Samarai, M. and Morana, B. and Tillmann, L. and Pfänder, N. and Wandzilak, A. and Watts, B. and Belkhou, R. and Muhler, M. and Muhler, M. and Debeer, S.
ACS CATALYSIS. Volume: 10 (2020) - 2020 • 88
Deformation mechanisms in a superelastic NiTi alloy: An in-situ high resolution digital image correlation study
Polatidis, E. and Šmíd, M. and Kuběna, I. and Hsu, W.-N. and Laplanche, G. and Van Swygenhoven, H.
MATERIALS AND DESIGN. Volume: 191 (2020) - 2020 • 87
In situ X-ray emission and high-resolution X-ray absorption spectroscopy applied to Ni-based bimetallic dry methane reforming catalysts
Beheshti Askari, A. and Al Samarai, M. and Hiraoka, N. and Ishii, H. and Tillmann, L. and Muhler, M. and Debeer, S.
NANOSCALE. Volume: 12 (2020) - 2020 • 86
Diffusion, defects and understanding the growth of a multicomponent interdiffusion zone between Pt-modified B2 NiAl bond coat and single crystal superalloy
Esakkiraja, N. and Gupta, A. and Jayaram, V. and Hickel, T. and Divinski, S.V. and Paul, A.
ACTA MATERIALIA. Volume: 195 (2020) - 2019 • 85
Influence of composition and precipitation evolution on damage at grain boundaries in a crept polycrystalline Ni-based superalloy
Kontis, P. and Kostka, A. and Raabe, D. and Gault, B.
ACTA MATERIALIA. Volume: 166 (2019) - 2019 • 84
Oxygen-mediated deformation and grain refinement in Cu-Fe nanocrystalline alloys
Guo, J. and Duarte, M.J. and Zhang, Y. and Bachmaier, A. and Gammer, C. and Dehm, G. and Pippan, R. and Zhang, Z.
ACTA MATERIALIA. Volume: 166 (2019) - 2019 • 83
On the role of cobalt carbidization in higher alcohol synthesis over hydrotalcite-based Co-Cu catalysts
Nebel, J. and Schmidt, S. and Pan, Q. and Lotz, K. and Kaluza, S. and Muhler, M.
CHINESE JOURNAL OF CATALYSIS. Volume: 40 (2019) - 2019 • 82
Effects of femtosecond laser shock peening in distilled water on the surface characterizations of NiTi shape memory alloy
Wang, H. and Pöhl, F. and Yan, K. and Decker, P. and Gurevich, E.L. and Ostendorf, A.
APPLIED SURFACE SCIENCE. Volume: 471 (2019) - 2019 • 81
Thermodynamic assessment of the Co-Ta system
Wang, P. and Koßmann, J. and Kattner, U.R. and Palumbo, M. and Hammerschmidt, T. and Olson, G.B.
CALPHAD: COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY. Volume: 64 (2019) - 2019 • 80
Comparative study of different anisotropy and potential formulations of phase-field models for dendritic solidification
Kundin, J. and Steinbach, I.
COMPUTATIONAL MATERIALS SCIENCE. Volume: 170 (2019) - 2019 • 79
Thermodynamics of grain boundary segregation, interfacial spinodal and their relevance for nucleation during solid-solid phase transitions
Kwiatkowski da Silva, A. and Kamachali, R.D. and Ponge, D. and Gault, B. and Neugebauer, J. and Raabe, D.
ACTA MATERIALIA. Volume: 168 (2019) - 2019 • 78
On the compositional partitioning during phase transformation in a binary ferromagnetic MnAl alloy
Palanisamy, D. and Raabe, D. and Gault, B.
ACTA MATERIALIA. Volume: 174 (2019) - 2019 • 77
Iron Aluminides
Palm, M. and Stein, F. and Dehm, G.
ANNUAL REVIEW OF MATERIALS RESEARCH. Volume: 49 (2019) - 2019 • 76
Strength of hydrogen-free and hydrogen-doped Ni50Ti50 shape memory platelets
Weiser, A. and Buršíková, V. and Jarý, M. and Dymáček, P. and Dugáček, J. and Frenzel, J. and Čermák, J. and Dlouhý, A.
SCRIPTA MATERIALIA. Volume: 162 (2019) - 2019 • 75
Strength of hydrogen-free and hydrogen-doped Ni 50 Ti 50 shape memory platelets
Weiser, A. and Buršíková, V. and Jarý, M. and Dymáček, P. and Dugáček, J. and Frenzel, J. and Čermák, J. and Dlouhý, A.
SCRIPTA MATERIALIA. Volume: 162 (2019) - 2019 • 74
On the evolution of dislocation cell structures in two Al-alloys (Al-5Mg and Al-11Zn) during reciprocal sliding wear at high homologous temperatures
Parsa, A.B. and Walter, M. and Theisen, W. and Bürger, D. and Eggeler, G.
WEAR. Volume: (2019) - 2019 • 73
Ab initio phase stabilities of Ce-based hard magnetic materials and comparison with experimental phase diagrams
Sözen, H.Ä. and Ener, S. and MacCari, F. and Skokov, K.P. and Gutfleisch, O. and Körmann, F. and Neugebauer, J. and Hickel, T.
PHYSICAL REVIEW MATERIALS. Volume: 3 (2019) - 2019 • 72
On the role of nitrogen on hydrogen environment embrittlement of high-interstitial austenitic CrMnC(N) steels
Egels, G. and Fussik, R. and Weber, S. and Theisen, W.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY. Volume: 44 (2019) - 2019 • 71
Altering the stability of nanoislands through core-shell supports
Sprodowski, C. and Morgenstern, K.
NANOSCALE. Volume: 11 (2019) - 2019 • 70
Enhanced propylene oxide selectivity for gas phase direct propylene epoxidation by lattice expansion of silver atoms on nickel nanoparticles
Yu, B. and Ayvalı, T. and Raine, E. and Li, T. and Li, M.M.-J. and Zheng, J. and Wu, S. and Bagabas, A.A. and Tsang, S.C.E.
APPLIED CATALYSIS B: ENVIRONMENTAL. Volume: 243 (2019) - 2019 • 69
Quasi-Fermi-Level Splitting of Cu -Poor and Cu -Rich CuIn S2 Absorber Layers
Lomuscio, A. and Rödel, T. and Schwarz, T. and Gault, B. and Melchiorre, M. and Raabe, D. and Siebentritt, S.
PHYSICAL REVIEW APPLIED. Volume: 11 (2019) - 2019 • 68
Influence of phase decomposition on mechanical behavior of an equiatomic CoCuFeMnNi high entropy alloy
MacDonald, B.E. and Fu, Z. and Wang, X. and Li, Z. and Chen, W. and Zhou, Y. and Raabe, D. and Schoenung, J. and Hahn, H. and Lavernia, E.J.
ACTA MATERIALIA. Volume: 181 (2019) - 2019 • 67
First-principles characterization of reversible martensitic transformations
Ferrari, A. and Sangiovanni, D.G. and Rogal, J. and Drautz, R.
PHYSICAL REVIEW B. Volume: 99 (2019) - 2019 • 66
Discovery of ω -free high-temperature Ti-Ta- X shape memory alloys from first-principles calculations
Ferrari, A. and Paulsen, A. and Langenkämper, D. and Piorunek, D. and Somsen, C. and Frenzel, J. and Rogal, J. and Eggeler, G. and Drautz, R.
PHYSICAL REVIEW MATERIALS. Volume: 3 (2019) - 2019 • 65
Role of Boron and Phosphorus in Enhanced Electrocatalytic Oxygen Evolution by Nickel Borides and Nickel Phosphides
Masa, J. and Andronescu, C. and Antoni, H. and Sinev, I. and Seisel, S. and Elumeeva, K. and Barwe, S. and Marti-Sanchez, S. and Arbiol, J. and Roldan Cuenya, B. and Muhler, M. and Schuhmann, W.
CHEMELECTROCHEM. Volume: 6 (2019) - 2019 • 64
Temperature and load-ratio dependent fatigue-crack growth in the CrMnFeCoNi high-entropy alloy
Thurston, K.V.S. and Gludovatz, B. and Yu, Q. and Laplanche, G. and George, E.P. and Ritchie, R.O.
JOURNAL OF ALLOYS AND COMPOUNDS. Volume: 794 (2019) - 2019 • 63
A neutron diffraction demonstration of long-range magnetic order in the quasicrystal approximant DyCd6
Ryan, D.H. and Cadogan, J.M. and Kong, T. and Canfield, P.C. and Goldman, A.I. and Kreyssig, A.
AIP ADVANCES. Volume: 9 (2019) - 2019 • 62
New flat-punch indentation creep testing approach for characterizing the local creep properties at high temperatures
Matschkal-Amberger, D. and Kolb, M. and Neumeier, S. and Gao, S. and Hartmaier, A. and Durst, K. and Göken, M.
MATERIALS AND DESIGN. Volume: 183 (2019) - 2019 • 61
On the effects of microstructure on the mechanical properties of open-pore Al–11Zn foams
Matz, A.M. and Matz, B.S. and Parsa, A.B. and Jost, N. and Eggeler, G.
MATERIALS SCIENCE AND ENGINEERING A. Volume: 759 (2019) - 2019 • 60
Imaging individual solute atoms at crystalline imperfections in metals
Katnagallu, S. and Stephenson, L.T. and Mouton, I. and Freysoldt, C. and Subramanyam, A.P.A. and Jenke, J. and Ladines, A.N. and Neumeier, S. and Hammerschmidt, T. and Drautz, R. and Neugebauer, J. and Vurpillot, F. and Raabe, D. and Gault, B.
NEW JOURNAL OF PHYSICS. Volume: 21 (2019) - 2019 • 59
Fe/Co/Ni mixed oxide nanoparticles supported on oxidized multi-walled carbon nanotubes as electrocatalysts for the oxygen reduction and the oxygen evolution reactions in alkaline media
Kazakova, M.A. and Morales, D.M. and Andronescu, C. and Elumeeva, K. and Selyutin, A.G. and Ishchenko, A.V. and Golubtsov, G.V. and Dieckhöfer, S. and Schuhmann, W. and Masa, J.
CATALYSIS TODAY. Volume: (2019) - 2019 • 58
Synthesis, microstructure, and hardness of rapidly solidified Cu-Cr alloys
Garzón-Manjón, A. and Christiansen, L. and Kirchlechner, I. and Breitbach, B. and Liebscher, C.H. and Springer, H. and Dehm, G.
JOURNAL OF ALLOYS AND COMPOUNDS. Volume: 794 (2019) - 2019 • 57
On the influence of the heat treatment on microstructure formation and mechanical properties of near-α Ti-Fe alloys
Sandlöbes, S. and Korte-Kerzel, S. and Raabe, D.
MATERIALS SCIENCE AND ENGINEERING A. Volume: 748 (2019) - 2019 • 56
Electron-phonon coupling and superconductivity-induced distortion of the phonon lineshape in V3Si
Sauer, A. and Zocco, D.A. and Said, A.H. and Heid, R. and Böhmer, A. and Weber, F.
PHYSICAL REVIEW B. Volume: 99 (2019) - 2019 • 55
Bimetallic silver-platinum nanoparticles with combined osteo-promotive and antimicrobial activity
Breisch, M. and Grasmik, V. and Loza, K. and Pappert, K. and Rostek, A. and Ziegler, N. and Ludwig, Al. and Heggen, M. and Epple, M. and Tiller, J.C. and Schildhauer, T.A. and Köller, M. and Sengstock, C.
NANOTECHNOLOGY. Volume: 30 (2019) - 2019 • 54
Cold spray deposition of Cr2AlC MAX phase for coatings and bond-coat layers
Go, T. and Sohn, Y.J. and Mauer, G. and Vaßen, R. and Gonzalez-Julian, J.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY. Volume: 39 (2019) - 2018 • 53
Multiscale Characterization of Microstructure in Near-Surface Regions of a 16MnCr5 Gear Wheel After Cyclic Loading
Medghalchi, S. and Jamebozorgi, V. and Bala Krishnan, A. and Vincent, S. and Salomon, S. and Basir Parsa, A. and Pfetzing, J. and Kostka, A. and Li, Y. and Eggeler, G. and Li, T.
JOM. Volume: (2018) - 2018 • 52
Electrocatalytic Nanoparticles That Mimic the Three-Dimensional Geometric Architecture of Enzymes: Nanozymes
Benedetti, T.M. and Andronescu, C. and Cheong, S. and Wilde, P. and Wordsworth, J. and Kientz, M. and Tilley, R.D. and Schuhmann, W. and Gooding, J.J.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY. Volume: 140 (2018) - 2018 • 51
On the Electropolishing Mechanism of Nickel Titanium in Methanolic Sulfuric acid − An Electrochemical Impedance Study
Fushimi, K. and Neelakantan, L. and Eggeler, G. and Hassel, A.W.
PHYSICA STATUS SOLIDI (A) APPLICATIONS AND MATERIALS SCIENCE. Volume: 215 (2018) - 2018 • 50
Understanding the Effect of Au in Au-Pd Bimetallic Nanocrystals on the Electrocatalysis of the Methanol Oxidation Reaction
Kelly, C.H.W. and Benedetti, T.M. and Alinezhad, A. and Schuhmann, W. and Gooding, J.J. and Tilley, R.D.
JOURNAL OF PHYSICAL CHEMISTRY C. Volume: 122 (2018) - 2018 • 49
Compositional evolution of long-period stacking ordered structures in magnesium studied by atom probe tomography
Kim, J.-K. and Guo, W. and Choi, P.-P. and Raabe, D.
SCRIPTA MATERIALIA. Volume: 156 (2018) - 2018 • 48
NiTi-Based Elastocaloric Cooling on the Macroscale: From Basic Concepts to Realization
Kirsch, S.-M. and Welsch, F. and Michaelis, N. and Schmidt, M. and Wieczorek, A. and Frenzel, J. and Eggeler, G. and Schütze, A. and Seelecke, S.
ENERGY TECHNOLOGY. Volume: 6 (2018) - 2018 • 47
Computationally Efficient Phase-field Simulation Studies Using RVE Sampling and Statistical Analysis
Schwarze, C. and Darvishi Kamachali, R. and Kühbach, M. and Mießen, C. and Tegeler, M. and Barrales-Mora, L. and Steinbach, I. and Gottstein, G.
COMPUTATIONAL MATERIALS SCIENCE. Volume: 147 (2018) - 2018 • 46
Fabrication of perovskite-based porous nanotubes as efficient bifunctional catalyst and application in hybrid lithium-oxygen batteries
Gong, H. and Wang, T. and Guo, H. and Fan, X. and Liu, X. and Song, L. and Xia, W. and Gao, B. and Huang, X. and He, J.
JOURNAL OF MATERIALS CHEMISTRY A. Volume: 6 (2018) - 2018 • 45
Microstructure and mechanical properties in the thin film system Cu-Zr
Oellers, T. and Raghavan, R. and Chakraborty, J. and Kirchlechner, C. and Kostka, A. and Liebscher, C.H. and Dehm, G. and Ludwig, Al.
THIN SOLID FILMS. Volume: 645 (2018) - 2018 • 44
Characterizing solute hydrogen and hydrides in pure and alloyed titanium at the atomic scale
Chang, Y. and Breen, A.J. and Tarzimoghadam, Z. and Kürnsteiner, P. and Gardner, H. and Ackerman, A. and Radecka, A. and Bagot, P.A.J. and Lu, W. and Li, T. and Jägle, E.A. and Herbig, M. and Stephenson, L.T. and Moody, M.P. and Rugg, D. and Dye, D. and Ponge, D. and Raabe, D. and Gault, B.
ACTA MATERIALIA. Volume: 150 (2018) - 2018 • 43
Elemental segregation to twin boundaries in a MnAl ferromagnetic Heusler alloy
Palanisamy, D. and Raabe, D. and Gault, B.
SCRIPTA MATERIALIA. Volume: 155 (2018) - 2018 • 42
Atypical titration curves for GaAl12 Keggin-ions explained by a joint experimental and simulation approach
Sulpizi, M. and Lützenkirchen, J.
JOURNAL OF CHEMICAL PHYSICS. Volume: 148 (2018) - 2018 • 41
From Quasicrystals to Crystals with Interpenetrating Icosahedra in Ca-Au-Al: In Situ Variable-Temperature Transformation
Pham, J. and Meng, F. and Lynn, M.J. and Ma, T. and Kreyssig, A. and Kramer, M.J. and Goldman, A.I. and Miller, G.J.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY. Volume: 140 (2018) - 2018 • 40
Segregation Phenomena in Size-Selected Bimetallic CuNi Nanoparticle Catalysts
Pielsticker, L. and Zegkinoglou, I. and Divins, N.J. and Mistry, H. and Chen, Y.-T. and Kostka, A. and Boscoboinik, J.A. and Cuenya, B.R.
JOURNAL OF PHYSICAL CHEMISTRY B. Volume: 122 (2018) - 2018 • 39
Hedgehog Spin-Vortex Crystal Antiferromagnetic Quantum Criticality in CaK (Fe1-xNix)4As4 Revealed by NMR
Ding, Q.-P. and Meier, W.R. and Cui, J. and Xu, M. and Böhmer, A.E. and Bud'Ko, S.L. and Canfield, P.C. and Furukawa, Y.
PHYSICAL REVIEW LETTERS. Volume: 121 (2018) - 2018 • 38
Antibacterial Efficacy of Sacrifical Anode Thin Films Combining Silver with Platinum Group Elements within a Bacteria-Containing Human Plasma Clot
Abuayyash, A. and Ziegler, N. and Gessmann, J. and Sengstock, C. and Schildhauer, T.A. and Ludwig, Al. and Köller, M.
ADVANCED ENGINEERING MATERIALS. Volume: 20 (2018) - 2018 • 37
Influence of Temperature and Electrolyte Concentration on the Structure and Catalytic Oxygen Evolution Activity of Nickel–Iron Layered Double Hydroxide
Andronescu, C. and Seisel, S. and Wilde, P. and Barwe, S. and Masa, J. and Chen, Y.-T. and Ventosa, E. and Schuhmann, W.
CHEMISTRY - A EUROPEAN JOURNAL. Volume: 24 (2018) - 2018 • 36
Influence of composition and crystal structure on the fracture toughness of NbCo2 Laves phase studied by micro-cantilever bending tests
Luo, W. and Kirchlechner, C. and Fang, X. and Brinckmann, S. and Dehm, G. and Stein, F.
MATERIALS AND DESIGN. Volume: 145 (2018) - 2018 • 35
Elemental partitioning and site-occupancy in γ/γ′ forming Co-Ti-Mo and Co-Ti-Cr alloys
Im, H.J. and Makineni, S.K. and Gault, B. and Stein, F. and Raabe, D. and Choi, P.-P.
SCRIPTA MATERIALIA. Volume: 154 (2018) - 2018 • 34
Development of high modulus steels based on the Fe – Cr – B system
Baron, C. and Springer, H. and Raabe, D.
MATERIALS SCIENCE AND ENGINEERING A. Volume: 724 (2018) - 2017 • 33
On the competition between the stress-induced formation of martensite and dislocation plasticity during crack propagation in pseudoelastic NiTi shape memory alloys
Ungár, T. and Frenzel, J. and Gollerthan, S. and Ribárik, G. and Balogh, L. and Eggeler, G.
JOURNAL OF MATERIALS RESEARCH. Volume: (2017) - 2017 • 32
Elastically confined martensitic transformation at the nano-scale in a multifunctional titanium alloy
Wang, H.L. and Hao, Y.L. and He, S.Y. and Li, T. and Cairney, J.M. and Wang, Y.D. and Wang, Y. and Obbard, E.G. and Prima, F. and Du, K. and Li, S.J. and Yang, R.
ACTA MATERIALIA. Volume: 135 (2017) - 2017 • 31
Electronic and molecular structure relations in diiron compounds mimicking the [FeFe]-hydrogenase active site studied by X-ray spectroscopy and quantum chemistry
Kositzki, R. and Mebs, S. and Schüth, N. and Leidel, N. and Schwartz, L. and Karnahl, M. and Wittkamp, F. and Daunke, D. and Grohmann, A. and Apfel, U.-P. and Gloaguen, F. and Ott, S. and Haumann, M.
DALTON TRANSACTIONS. Volume: 46 (2017) - 2017 • 30
Unraveling compositional effects on the light-induced oxygen evolution in Bi(V-Mo-X)O4 material libraries
Gutkowski, R. and Khare, C. and Conzuelo, F. and Kayran, Y.U. and Ludwig, Al. and Schuhmann, W.
ENERGY AND ENVIRONMENTAL SCIENCE. Volume: 10 (2017) - 2017 • 29
High-throughput study of binary thin film tungsten alloys
Nikolić, V. and Wurster, S. and Savan, A. and Ludwig, Al. and Pippan, R.
INTERNATIONAL JOURNAL OF REFRACTORY METALS AND HARD MATERIALS. Volume: 69 (2017) - 2017 • 28
A novel type of Co–Ti–Cr-base γ/γ′ superalloys with low mass density
Zenk, C.H. and Povstugar, I. and Li, R. and Rinaldi, F. and Neumeier, S. and Raabe, D. and Göken, M.
ACTA MATERIALIA. Volume: 135 (2017) - 2017 • 27
Spinel-Structured ZnCr2O4 with Excess Zn Is the Active ZnO/Cr2O3 Catalyst for High-Temperature Methanol Synthesis
Song, H. and Laudenschleger, D. and Carey, J.J. and Ruland, H. and Nolan, M. and Muhler, M.
ACS CATALYSIS. Volume: 7 (2017) - 2017 • 26
In-situ tracking the structural and chemical evolution of nanostructured CuCr alloys
Zhang, Z. and Guo, J. and Dehm, G. and Pippan, R.
ACTA MATERIALIA. Volume: 138 (2017) - 2017 • 25
Partial recrystallization of gum metal to achieve enhanced strength and ductility
Zhang, J.-L. and Tasan, C.C. and Lai, M.J. and Yan, D. and Raabe, D.
ACTA MATERIALIA. Volume: 135 (2017) - 2017 • 24
Gold-Palladium Bimetallic Catalyst Stability: Consequences for Hydrogen Peroxide Selectivity
Pizzutilo, E. and Freakley, S.J. and Cherevko, S. and Venkatesan, S. and Hutchings, G.J. and Liebscher, C.H. and Dehm, G. and Mayrhofer, K.J.J.
ACS CATALYSIS. Volume: 7 (2017) - 2017 • 23
The Space Confinement Approach Using Hollow Graphitic Spheres to Unveil Activity and Stability of Pt-Co Nanocatalysts for PEMFC
Pizzutilo, E. and Knossalla, J. and Geiger, S. and Grote, J.-P. and Polymeros, G. and Baldizzone, C. and Mezzavilla, S. and Ledendecker, M. and Mingers, A. and Cherevko, S. and Schüth, F. and Mayrhofer, K.J.J.
ADVANCED ENERGY MATERIALS. Volume: 7 (2017) - 2017 • 22
The shear instability energy: A new parameter for materials design?
Kanani, M. and Hartmaier, A. and Janisch, R.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING. Volume: 25 (2017) - 2015 • 21
Incorporating the CALPHAD sublattice approach of ordering into the phase-field model with finite interface dissipation
Zhang, L. and Stratmann, M. and Du, Y. and Sundman, B. and Steinbach, I.
ACTA MATERIALIA. Volume: 88 (2015) - 2015 • 20
Ab initio study of compositional trends in solid solution strengthening in metals with low Peierls stresses
Ma, D. and Friák, M. and Von Pezold, J. and Neugebauer, J. and Raabe, D.
ACTA MATERIALIA. Volume: 98 (2015) - 2015 • 19
On the widths of the hysteresis of mechanically and thermally induced martensitic transformations in Ni-Ti-based shape memory alloys
Jaeger, S. and Maaß, B. and Frenzel, J. and Schmidt, M. and Ullrich, J. and Seelecke, S. and Schütze, A. and Kastner, O. and Eggeler, G.
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH. Volume: 106 (2015) - 2015 • 18
The crystallographic template effect assisting the formation of stable α-Al2O3 during low temperature oxidation of Fe-Al alloys
Brito, P. and Pinto, H. and Kostka, A.
CORROSION SCIENCE. Volume: (2015) - 2015 • 17
Structural stability of Fe-based topologically close-packed phases
Ladines, A.N. and Hammerschmidt, T. and Drautz, R.
INTERMETALLICS. Volume: 59 (2015) - 2015 • 16
Rapid theory-guided prototyping of ductile Mg alloys: From binary to multi-component materials
Pei, Z. and Friák, M. and Sandlöbes, S. and Nazarov, R. and Svendsen, B. and Raabe, D. and Neugebauer, J.
NEW JOURNAL OF PHYSICS. Volume: 17 (2015) - 2014 • 15
On the functional degradation of binary titanium-tantalum high-temperature shape memory alloys - A new concept for fatigue life extension
Niendorf, T. and Krooß, P. and Batyrsina, E. and Paulsen, A. and Frenzel, J. and Eggeler, G. and Maier, H.J.
FUNCTIONAL MATERIALS LETTERS. Volume: 7 (2014) - 2014 • 14
Recovery, recrystallization, grain growth and phase stability of a family of FCC-structured multi-component equiatomic solid solution alloys
Wu, Z. and Bei, H. and Otto, F. and Pharr, G.M. and George, E.P.
INTERMETALLICS. Volume: 46 (2014) - 2014 • 13
Modelling of dendritic growth during alloy solidification under natural convection
Zhu, M. and Sun, D. and Pan, S. and Zhang, Q. and Raabe, D.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING. Volume: 22 (2014) - 2014 • 12
Composition Dependence of Phase Stability, Deformation Mechanisms, and Mechanical Properties of the CoCrFeMnNi High-Entropy Alloy System
Tasan, C.C. and Deng, Y. and Pradeep, K.G. and Yao, M.J. and Springer, H. and Raabe, D.
JOM. Volume: 66 (2014) - 2014 • 11
Effect of ternary element addition on the corrosion behaviour of NiTi shape memory alloys
Kassab, E. and Neelakantan, L. and Frotscher, M. and Swaminathan, S. and Maaß, B. and Rohwerder, M. and Gomes, J. and Eggeler, G.
MATERIALS AND CORROSION. Volume: 65 (2014) - 2014 • 10
The thermodynamic assessment of the Au-In-Ga system
Ghasemi, M. and Sundman, B. and Fries, S.G. and Johansson, J.
JOURNAL OF ALLOYS AND COMPOUNDS. Volume: 600 (2014) - 2013 • 9
The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy
Otto, F. and Dlouhý, A. and Somsen, C. and Bei, H. and Eggeler, G. and George, E.P.
ACTA MATERIALIA. Volume: 61 (2013) - 2013 • 8
Atomic engineering of platinum alloy surfaces
Li, T. and Bagot, P.A.J. and Marquis, E.A. and Edman Tsang, S.C. and Smith, G.D.W.
ULTRAMICROSCOPY. Volume: 132 (2013) - 2012 • 7
Combinatorial development of nanoporous WO 3 thin film photoelectrodes for solar water splitting by dealloying of binary alloys
Stepanovich, A. and Sliozberg, K. and Schuhmann, W. and Ludwig, Al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY. Volume: 37 (2012) - 2011 • 6
Molecular dynamics simulation study of microstructure evolution during cyclic martensitic transformations
Kastner, O. and Eggeler, G. and Weiss, W. and Ackland, G.J.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS. Volume: 59 (2011) - 2011 • 5
Achieving small structures in thin NiTi sheets for medical applications with water jet and micro machining: A comparison
Frotscher, M. and Kahleyss, F. and Simon, T. and Biermann, D. and Eggeler, G.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE. Volume: 20 (2011) - 2011 • 4
TCP phase predictions in Ni-based superalloys: Structure maps revisited
Seiser, B. and Drautz, R. and Pettifor, D.G.
ACTA MATERIALIA. Volume: 59 (2011) - 2011 • 3
On the stress-induced formation of R-phase in ultra-fine-grained Ni-rich NiTi shape memory alloys
Olbricht, J. and Yawny, A. and Pelegrina, J.L. and Dlouhy, A. and Eggeler, G.
METALLURGICAL AND MATERIALS TRANSACTIONS A: PHYSICAL METALLURGY AND MATERIALS SCIENCE. Volume: 42 (2011) - 2011 • 2
High-energy X-ray diffraction studies of i-Sc12Zn88
Goldman, A.I. and Kreyssig, A. and Nandi, S. and Kim, M.G. and Caudle, M.L. and Canfield, P.C.
PHILOSOPHICAL MAGAZINE. Volume: 91 (2011) - 2010 • 1
L21-ordered Fe-Al-Ti alloys
Krein, R. and Friak, M. and Neugebauer, J. and Palm, M. and Heilmaier, M.
INTERMETALLICS. Volume: 18 (2010)