- Ruhr-Universität Bochum
Scientific output
Publications
Below, you can either scroll through the complete list of our annually published research in peer-reviewed journals or search for a specific author or keyword via the free text search.
- 2024 • 210
Ni-Alloyed Copper Iodide Thin Films: Microstructural Features and Functional Performance
Dethloff, C. and Thieme, K. and Selle, S. and Seifert, M. and Vogt, S. and Splith, D. and Botti, S. and Grundmann, M. and Lorenz, M.
PHYSICA STATUS SOLIDI (B) BASIC RESEARCH. Volume: (2024) - 2024 • 209
On the inherent strength of Cr23C6 with the complex face-centered cubic D84 structure
Kishida, K. and Ito, M. and Inui, H. and Heilmaier, M. and Eggeler, G.
ACTA MATERIALIA. Volume: 263 (2024) - 2024 • 208
Misfit and the mechanism of high temperature and low stress creep of Ni-base single crystal superalloys
Parsa, A.B. and Bürger, D. and Pollock, T.M. and Eggeler, G.
ACTA MATERIALIA. Volume: 264 (2024) - 2024 • 207
Effect of stacking fault energy on the thickness and density of annealing twins in recrystallized FCC medium and high-entropy alloys
Schneider, M. and Couzinié, J. and Shalabi, A. and Ibrahimkhel, F. and Ferrari, A. and Körmann, F. and Laplanche, G.
SCRIPTA MATERIALIA. Volume: 240 (2024) - 2023 • 206
A review of the metastable omega phase in beta titanium alloys: the phase transformation mechanisms and its effect on mechanical properties
Ballor, J. and Li, T. and Prima, F. and Boehlert, C. J. and Devaraj, A.
INTERNATIONAL MATERIALS REVIEWS. Volume: 68 (2023) - 2023 • 205
Atomic-resolution observations of silver segregation in a [111] tilt grain boundary in copper
Langenohl, L. and Brink, T. and Richter, G. and Dehm, G. and Liebscher, C. H.
PHYSICAL REVIEW B. Volume: 107 (2023) - 2023 • 204
Oxide- and Silicate-Water Interfaces and Their Roles in Technology and the Environment
Bañuelos, J.L. and Borguet, E. and Brown, G.E. and Cygan, R.T. and Deyoreo, J.J. and Dove, P.M. and Gaigeot, M.-P. and Geiger, F.M. and Gibbs, J.M. and Grassian, V.H. and Ilgen, A.G. and Jun, Y.-S. and Kabengi, N. and Katz, L. and Kubicki, J.D. and Lützenkirchen, J. and Putnis, C.V. and Remsing, R.C. and Rosso, K.M. and Rother, G. and Sulpizi, M. and Villalobos, M. and Zhang, H.
CHEMICAL REVIEWS. Volume: 123 (2023) - 2023 • 203
Effect of grain size on critical twinning stress and work hardening behavior in the equiatomic CrMnFeCoNi high-entropy alloy
Wagner, C. and Laplanche, G.
INTERNATIONAL JOURNAL OF PLASTICITY. Volume: 166 (2023) - 2023 • 202
Local measurement of geometrically necessary dislocation densities and their strengthening effect in ultra-high deformed pearlite
Li, Y. and Goto, S. and Kostka, A. and Herbig, M.
MATERIALS CHARACTERIZATION. Volume: 203 (2023) - 2023 • 201
Local measurement of geometrically necessary dislocation densities and their strengthening effect in ultra-high deformed pearlite
Li, Y. and Goto, S. and Kostka, A. and Herbig, M.
MATERIALS CHARACTERIZATION. Volume: 203 (2023) - 2023 • 200
Cooperative deformation mechanisms in a fatigued CoCrNi multi-principal element alloy: A case of low stacking fault energy
Lu, K. and Chauhan, A. and Litvinov, D. and Schneider, M. and Laplanche, G. and Aktaa, J.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS. Volume: 180 (2023) - 2023 • 199
Linking Composition, Structure and Thickness of CoOOH layers to Oxygen Evolution Reaction Activity by Correlative Microscopy
Luan, C. and Angona, J. and Bala Krishnan, A. and Corva, M. and Hosseini, P. and Heidelmann, M. and Hagemann, U. and Batsa Tetteh, E. and Schuhmann, W. and Tschulik, K. and Li, T.
ANGEWANDTE CHEMIE - INTERNATIONAL EDITION. Volume: 62 (2023) - 2023 • 198
Evolution of local misorientations in the γ/γ’-microstructure of single crystal superalloys during creep studied with the rotation vector baseline (RVB) EBSD method
Gamanov, S. and Dlouhy, A. and Bürger, D. and Eggeler, G. and Thome, P.
MICROSCOPY RESEARCH AND TECHNIQUE. Volume: (2023) - 2022 • 197
Linear growth of reaction layer during in-situ TEM annealing of thin film Al/Ni diffusion couples
Kostka, A. and Naujoks, D. and Oellers, T. and Salomon, S. and Somsen, C. and Öztürk, E. and Savan, A. and Ludwig, A. and Eggeler, G.
JOURNAL OF ALLOYS AND COMPOUNDS. Volume: 922 (2022) - 2022 • 196
Quantitative analysis of grain boundary diffusion, segregation and precipitation at a sub-nanometer scale
Peng, Z. and Meiners, T. and Lu, Y. and Liebscher, C.H. and Kostka, A. and Raabe, D. and Gault, B.
ACTA MATERIALIA. Volume: 225 (2022) - 2022 • 195
A sustainable ultra-high strength Fe18Mn3Ti maraging steel through controlled solute segregation and α-Mn nanoprecipitation
Kwiatkowski da Silva, A. and Souza Filho, I.R. and Lu, W. and Zilnyk, K.D. and Hupalo, M.F. and Alves, L.M. and Ponge, D. and Gault, B. and Raabe, D.
NATURE COMMUNICATIONS. Volume: 13 (2022) - 2022 • 194
Microstructure and residual stress evolution in nanocrystalline Cu-Zr thin films
Chakraborty, J. and Oellers, T. and Raghavan, R. and Ludwig, A. and Dehm, G.
JOURNAL OF ALLOYS AND COMPOUNDS. Volume: 896 (2022) - 2022 • 193
Deformation and phase transformation in polycrystalline cementite (Fe3C) during single- and multi-pass sliding wear
Tsybenko, H. and Tian, C. and Rau, J. and Breitbach, B. and Schreiber, P. and Greiner, C. and Dehm, G. and Brinckmann, S.
ACTA MATERIALIA. Volume: 227 (2022) - 2022 • 192
Elevated-temperature cyclic deformation mechanisms of CoCrNi in comparison to CoCrFeMnNi
Lu, K. and Knöpfle, F. and Chauhan, A. and Litvinov, D. and Schneider, M. and Laplanche, G. and Aktaa, J.
SCRIPTA MATERIALIA. Volume: 220 (2022) - 2022 • 191
Effects of Cr/Ni ratio on physical properties of Cr-Mn-Fe-Co-Ni high-entropy alloys
Wagner, C. and Ferrari, A. and Schreuer, J. and Couzinié, J.-P. and Ikeda, Y. and Körmann, F. and Eggeler, G. and George, E.P. and Laplanche, G.
ACTA MATERIALIA. Volume: 227 (2022) - 2022 • 190
Exploring stability of a nanoscale complex solid solution thin film by in situ heating transmission electron microscopy
Manjón, A.G. and Zhang, S. and Völker, B. and Meischein, M. and Ludwig, Al. and Scheu, C.
MRS BULLETIN. Volume: (2022) - 2022 • 189
Elucidating dislocation core structures in titanium nitride through high-resolution imaging and atomistic simulations
Salamania, J. and Sangiovanni, D.G. and Kraych, A. and Calamba Kwick, K.M. and Schramm, I.C. and Johnson, L.J.S. and Boyd, R. and Bakhit, B. and Hsu, T.W. and Mrovec, M. and Rogström, L. and Tasnádi, F. and Abrikosov, I.A. and Odén, M.
MATERIALS AND DESIGN. Volume: 224 (2022) - 2022 • 188
Hydrogen-assisted decohesion associated with nanosized grain boundary κ-carbides in a high-Mn lightweight steel
Elkot, M.N. and Sun, B. and Zhou, X. and Ponge, D. and Raabe, D.
ACTA MATERIALIA. Volume: 241 (2022) - 2022 • 187
Impact of interstitial elements on the stacking fault energy of an equiatomic CoCrNi medium entropy alloy: theory and experiments
Moravcik, I. and Zelený, M. and Dlouhy, A. and Hadraba, H. and Moravcikova-Gouvea, L. and Papež, P. and Fikar, O. and Dlouhy, I. and Raabe, D. and Li, Z.
SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS. Volume: 23 (2022) - 2022 • 186
A review of the metastable omega phase in beta titanium alloys: the phase transformation mechanisms and its effect on mechanical properties
Ballor, J. and Li, T. and Prima, F. and Boehlert, C.J. and Devaraj, A.
INTERNATIONAL MATERIALS REVIEWS. Volume: (2022) - 2022 • 185
Non-uniform He bubble formation in W/W2C composite: Experimental and ab-initio study
Šestan, A. and Sreekala, L. and Markelj, S. and Kelemen, M. and Zavašnik, J. and Liebscher, C.H. and Dehm, G. and Hickel, T. and Čeh, M. and Novak, S. and Jenuš, P.
ACTA MATERIALIA. Volume: 226 (2022) - 2022 • 184
In Situ Carbon Corrosion and Cu Leaching as a Strategy for Boosting Oxygen Evolution Reaction in Multimetal Electrocatalysts
Zhang, J. and Quast, T. and He, W. and Dieckhöfer, S. and Junqueira, J.R.C. and Öhl, D. and Wilde, P. and Jambrec, D. and Chen, Y.-T. and Schuhmann, W.
ADVANCED MATERIALS. Volume: (2022) - 2021 • 183
Phase decomposition in nanocrystalline Cr0.8Cu0.2 thin films
Chakraborty, J. and Harzer, T.P. and Duarte, M.J. and Dehm, G.
JOURNAL OF ALLOYS AND COMPOUNDS. Volume: 888 (2021) - 2021 • 182
Understanding creep of a single-crystalline Co-Al-W-Ta superalloy by studying the deformation mechanism, segregation tendency and stacking fault energy
Volz, N. and Xue, F. and Zenk, C.H. and Bezold, A. and Gabel, S. and Subramanyam, A.P.A. and Drautz, R. and Hammerschmidt, T. and Makineni, S.K. and Gault, B. and Göken, M. and Neumeier, S.
ACTA MATERIALIA. Volume: 214 (2021) - 2021 • 181
Parallel Dislocation Networks and Cottrell Atmospheres Reduce Thermal Conductivity of PbTe Thermoelectrics
Abdellaoui, L. and Chen, Z. and Yu, Y. and Luo, T. and Hanus, R. and Schwarz, T. and Bueno Villoro, R. and Cojocaru-Mirédin, O. and Snyder, G.J. and Raabe, D. and Pei, Y. and Scheu, C. and Zhang, S.
ADVANCED FUNCTIONAL MATERIALS. Volume: 31 (2021) - 2021 • 180
Effects of temperature on mechanical properties and deformation mechanisms of the equiatomic CrFeNi medium-entropy alloy
Schneider, M. and Laplanche, G.
ACTA MATERIALIA. Volume: 204 (2021) - 2021 • 179
TEM replica analysis of particle phases in a tempered martensite ferritic Cr steel after long term creep
Wang, H. and Kostka, A. and Goosen, W.E. and Eggeler, G. and Westraadt, J.E.
MATERIALS CHARACTERIZATION. Volume: 181 (2021) - 2021 • 178
Searching novel complex solid solution electrocatalysts in unconventional element combinations
Krysiak, O.A. and Schumacher, S. and Savan, A. and Schuhmann, W. and Ludwig, A. and Andronescu, C.
NANO RESEARCH. Volume: (2021) - 2021 • 177
Dislocation networks in gamma/gamma’-microstructures formed during selective laser melting of a Ni-base superalloy
Heep, L. and Schwalbe, C. and Heinze, C. and Dlouhy, A. and Rae, C.M.F. and Eggeler, G.
SCRIPTA MATERIALIA. Volume: 190 (2021) - 2021 • 176
Revisiting ω phase embrittlement in metastable β titanium alloys: Role of elemental partitioning
Lai, M.J. and Li, T. and Yan, F.K. and Li, J.S. and Raabe, D.
SCRIPTA MATERIALIA. Volume: 193 (2021) - 2021 • 175
Structure and hardness of in situ synthesized nano-oxide strengthened CoCrFeNi high entropy alloy thin films
Lee, S. and Chatain, D. and Liebscher, C.H. and Dehm, G.
SCRIPTA MATERIALIA. Volume: 203 (2021) - 2021 • 174
The influence of post-weld tempering temperatures on microstructure and strength in the stir zone of friction stir welded reduced activation ferritic/martensitic steel
Li, S. and Yang, X. and Vajragupta, N. and Tang, W. and Hartmaier, A. and Li, H.
MATERIALS SCIENCE AND ENGINEERING A. Volume: 814 (2021) - 2021 • 173
Thermoelastic properties and γ’-solvus temperatures of single-crystal Ni-base superalloys
Horst, O.M. and Schmitz, D. and Schreuer, J. and Git, P. and Wang, H. and Körner, C. and Eggeler, G.
JOURNAL OF MATERIALS SCIENCE. Volume: 56 (2021) - 2021 • 172
Combinatorial exploration of B2/L21 precipitation strengthened AlCrFeNiTi compositionally complex alloys
Wolff-Goodrich, S. and Marshal, A. and Pradeep, K.G. and Dehm, G. and Schneider, J.M. and Liebscher, C.H.
JOURNAL OF ALLOYS AND COMPOUNDS. Volume: 853 (2021) - 2021 • 171
Partitioning of Solutes at Crystal Defects in Borides After Creep and Annealing in a Polycrystalline Superalloy
Lilensten, L. and Kostka, A. and Lartigue-Korinek, S. and Gault, B. and Tin, S. and Antonov, S. and Kontis, P.
JOM. Volume: (2021) - 2021 • 170
Sensing and electrocatalytic activity of tungsten disulphide thin films fabricated via metal-organic chemical vapour deposition
Wree, J.-L. and Glauber, J.-P. and Öhl, D. and Niesen, A. and Kostka, A. and Rogalla, D. and Schuhmann, W. and Devi, A.
JOURNAL OF MATERIALS CHEMISTRY C. Volume: 9 (2021) - 2021 • 169
CALPHAD-informed phase-field modeling of grain boundary microchemistry and precipitation in Al-Zn-Mg-Cu alloys
Liu, C. and Garner, A. and Zhao, H. and Prangnell, P.B. and Gault, B. and Raabe, D. and Shanthraj, P.
ACTA MATERIALIA. Volume: 214 (2021) - 2021 • 168
Single Particle Nanoelectrochemistry Reveals the Catalytic Oxygen Evolution Reaction Activity of Co3O4 Nanocubes
Quast, T. and Varhade, S. and Saddeler, S. and Chen, Y.-T. and Andronescu, C. and Schulz, S. and Schuhmann, W.
ANGEWANDTE CHEMIE - INTERNATIONAL EDITION. Volume: 60 (2021) - 2021 • 167
Ultrastructural changes of bovine tooth surfaces under erosion in presence of biomimetic hydroxyapatite
Fabritius-Vilpoux, K. and Enax, J. and Mayweg, D. and Meyer, F. and Herbig, M. and Raabe, D. and Fabritius, H.-O.
BIOINSPIRED, BIOMIMETIC AND NANOBIOMATERIALS. Volume: 10 (2021) - 2021 • 166
Identification of Active Sites in the Catalytic Oxidation of 2-Propanol over Co1+xFe2–xO4 Spinel Oxides at Solid/Liquid and Solid/Gas Interfaces
Falk, T. and Budiyanto, E. and Dreyer, M. and Pflieger, C. and Waffel, D. and Büker, J. and Weidenthaler, C. and Ortega, K.F. and Behrens, M. and Tüysüz, H. and Muhler, M. and Peng, B.
CHEMCATCHEM. Volume: 13 (2021) - 2021 • 165
Influence of the particle size on selective 2-propanol gas-phase oxidation over Co3O4 nanospheres
Falk, T. and Anke, S. and Hajiyani, H. and Saddeler, S. and Schulz, S. and Pentcheva, R. and Peng, B. and Muhler, M.
CATALYSIS SCIENCE AND TECHNOLOGY. Volume: 11 (2021) - 2021 • 164
Unveiling the interface characteristics and their influence on the heat transfer behavior of hot-forged Cu–Cr/Diamond composites
Jia, S.Q. and Bolzoni, L. and Li, T. and Yang, F.
CARBON. Volume: 172 (2021) - 2021 • 163
In situ investigation of nanometric cutting of 3C-SiC using scanning electron microscope
Tian, D. and Xu, Z. and Liu, L. and Zhou, Z. and Zhang, J. and Zhao, X. and Hartmaier, A. and Liu, B. and Song, L. and Luo, X.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY. Volume: (2021) - 2021 • 162
On the long-term aging of S-phase in aluminum alloy 2618A
Rockenhäuser, C. and Rowolt, C. and Milkereit, B. and Darvishi Kamachali, R. and Kessler, O. and Skrotzki, B.
JOURNAL OF MATERIALS SCIENCE. Volume: (2021) - 2021 • 161
Unraveling the Formation Mechanism of Nanoparticles Sputtered in Ionic Liquid
Meischein, M. and Wang, X. and Ludwig, Al.
JOURNAL OF PHYSICAL CHEMISTRY C. Volume: (2021) - 2021 • 160
Nickel nanoparticles supported on nitrogen–doped carbon nanotubes are a highly active, selective and stable CO2 methanation catalyst
Gödde, J. and Merko, M. and Xia, W. and Muhler, M.
JOURNAL OF ENERGY CHEMISTRY. Volume: 54 (2021) - 2020 • 159
Atomic Scale Origin of Metal Ion Release from Hip Implant Taper Junctions
Balachandran, S. and Zachariah, Z. and Fischer, A. and Mayweg, D. and Wimmer, M.A. and Raabe, D. and Herbig, M.
ADVANCED SCIENCE. Volume: 7 (2020) - 2020 • 158
Early stage phase separation of AlCoCr0.75Cu0.5FeNi high-entropy powder at the nanoscale
Peter, N.J. and Duarte, M.J. and Liebscher, C.H. and Srivastava, V.C. and Uhlenwinkel, V. and Jägle, E.A. and Dehm, G.
JOURNAL OF ALLOYS AND COMPOUNDS. Volume: 820 (2020) - 2020 • 157
Correlative chemical and structural investigations of accelerated phase evolution in a nanocrystalline high entropy alloy
Li, Y.J. and Kostka, A. and Savan, A. and Ludwig, Al.
SCRIPTA MATERIALIA. Volume: 183 (2020) - 2020 • 156
Phase decomposition in a nanocrystalline CrCoNi alloy
Li, Y.J. and Kostka, A. and Savan, A. and Ludwig, Al.
SCRIPTA MATERIALIA. Volume: 188 (2020) - 2020 • 155
Multicomponent diffusion of F, Cl and OH in apatite with application to magma ascent rates
Li, W. and Chakraborty, S. and Nagashima, K. and Costa, F.
EARTH AND PLANETARY SCIENCE LETTERS. Volume: 550 (2020) - 2020 • 154
(Al, Zn)3Zr dispersoids assisted η′ precipitation in anAl-Zn-Mg-Cu-Zr alloy
Zhao, H. and Chen, Y. and Gault, B. and Makineni, S.K. and Ponge, D. and Raabe, D.
MATERIALIA. Volume: 10 (2020) - 2020 • 153
Irreversible Structural Changes of Copper Hexacyanoferrate Used as a Cathode in Zn-Ion Batteries
Lim, J. and Kasiri, G. and Sahu, R. and Schweinar, K. and Hengge, K. and Raabe, D. and La Mantia, F. and Scheu, C.
CHEMISTRY - A EUROPEAN JOURNAL. Volume: 26 (2020) - 2020 • 152
A Universal Nano-capillary Based Method of Catalyst Immobilization for Liquid-Cell Transmission Electron Microscopy
Tarnev, T. and Cychy, S. and Andronescu, C. and Muhler, M. and Schuhmann, W. and Chen, Y.-T.
ANGEWANDTE CHEMIE - INTERNATIONAL EDITION. Volume: 59 (2020) - 2020 • 151
Synergistic Effect of Molybdenum and Tungsten in Highly Mixed Carbide Nanoparticles as Effective Catalysts in the Hydrogen Evolution Reaction under Alkaline and Acidic Conditions
Fu, Q. and Peng, B. and Masa, J. and Chen, Y.-T. and Xia, W. and Schuhmann, W. and Muhler, M.
CHEMELECTROCHEM. Volume: 7 (2020) - 2020 • 150
Bulk nanostructured AlCoCrFeMnNi chemically complex alloy synthesized by laser-powder bed fusion
Jung, H.Y. and Peter, N.J. and Gärtner, E. and Dehm, G. and Uhlenwinkel, V. and Jägle, E.A.
ADDITIVE MANUFACTURING. Volume: 35 (2020) - 2020 • 149
On the stress and temperature dependence of low temperature and high stress shear creep in Ni-base single crystal superalloys
Bürger, D. and Dlouhý, A. and Yoshimi, K. and Eggeler, G.
MATERIALS SCIENCE AND ENGINEERING A. Volume: 795 (2020) - 2020 • 148
Tantalum and zirconium induced structural transitions at complex [111] tilt grain boundaries in copper
Meiners, T. and Duarte, J.M. and Richter, G. and Dehm, G. and Liebscher, C.H.
ACTA MATERIALIA. Volume: 190 (2020) - 2020 • 147
Synthesis of plasmonic Fe/Al nanoparticles in ionic liquids
Schmitz, A. and Meyer, H. and Meischein, M. and Garzón Manjón, A. and Schmolke, L. and Giesen, B. and Schlüsener, C. and Simon, P. and Grin, Y. and Fischer, R.A. and Scheu, C. and Ludwig, Al. and Janiak, C.
RSC ADVANCES. Volume: 10 (2020) - 2020 • 146
Analysis of strengthening due to grain boundaries and annealing twin boundaries in the CrCoNi medium-entropy alloy
Schneider, M. and George, E.P. and Manescau, T.J. and Záležák, T. and Hunfeld, J. and Dlouhý, A. and Eggeler, G. and Laplanche, G.
INTERNATIONAL JOURNAL OF PLASTICITY. Volume: 124 (2020) - 2020 • 145
Could face-centered cubic titanium in cold-rolled commercially-pure titanium only be a Ti-hydride?
Chang, Y. and Zhang, S. and Liebscher, C.H. and Dye, D. and Ponge, D. and Scheu, C. and Dehm, G. and Raabe, D. and Gault, B. and Lu, W.
SCRIPTA MATERIALIA. Volume: 178 (2020) - 2020 • 144
Revealing the two-step nucleation and growth mechanism of vanadium carbonitrides in microalloyed steels
Wang, H. and Li, Y. and Detemple, E. and Eggeler, G.
SCRIPTA MATERIALIA. Volume: 187 (2020) - 2020 • 143
On the atomic solute diffusional mechanisms during compressive creep deformation of a Co-Al-W-Ta single crystal superalloy
He, J. and Zenk, C.H. and Zhou, X. and Neumeier, S. and Raabe, D. and Gault, B. and Makineni, S.K.
ACTA MATERIALIA. Volume: 184 (2020) - 2020 • 142
Atomic scale configuration of planar defects in the Nb-rich C14 Laves phase NbFe2
Šlapáková, M. and Zendegani, A. and Liebscher, C.H. and Hickel, T. and Neugebauer, J. and Hammerschmidt, T. and Ormeci, A. and Grin, J. and Dehm, G. and Kumar, K.S. and Stein, F.
ACTA MATERIALIA. Volume: 183 (2020) - 2020 • 141
On the reversible deactivation of cobalt ferrite spinel nanoparticles applied in selective 2-propanol oxidation
Anke, S. and Falk, T. and Bendt, G. and Sinev, I. and Hävecker, M. and Antoni, H. and Zegkinoglou, I. and Jeon, H. and Knop-Gericke, A. and Schlögl, R. and Roldan Cuenya, B. and Schulz, S. and Muhler, M.
JOURNAL OF CATALYSIS. Volume: 382 (2020) - 2020 • 140
High-throughput characterization of Ag–V–O nanostructured thin-film materials libraries for photoelectrochemical solar water splitting
Kumari, S. and Helt, L. and Junqueira, J.R.C. and Kostka, A. and Zhang, S. and Sarker, S. and Mehta, A. and Scheu, C. and Schuhmann, W. and Ludwig, Al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY. Volume: 45 (2020) - 2020 • 139
Grain boundary segregation, phase formation, and their influence on the coercivity of rapidly solidified SmF e11Ti hard magnetic alloys
Palanisamy, D. and Ener, S. and Maccari, F. and Schäfer, L. and Skokov, K.P. and Gutfleisch, O. and Raabe, D. and Gault, B.
PHYSICAL REVIEW MATERIALS. Volume: 4 (2020) - 2020 • 138
A new metalorganic chemical vapor deposition process for MoS2with a 1,4-diazabutadienyl stabilized molybdenum precursor and elemental sulfur
Wree, J.-L. and Ciftyurek, E. and Zanders, D. and Boysen, N. and Kostka, A. and Rogalla, D. and Kasischke, M. and Ostendorf, A. and Schierbaum, K. and Devi, A.
DALTON TRANSACTIONS. Volume: 49 (2020) - 2019 • 137
Stress-induced formation of TCP phases during high temperature low cycle fatigue loading of the single-crystal Ni-base superalloy ERBO/1
Meid, C. and Eggeler, M. and Watermeyer, P. and Kostka, A. and Hammerschmidt, T. and Drautz, R. and Eggeler, G. and Bartsch, M.
ACTA MATERIALIA. Volume: 168 (2019) - 2019 • 136
On the influence of the heat treatment on microstructure formation and mechanical properties of near-α Ti-Fe alloys
Sandlöbes, S. and Korte-Kerzel, S. and Raabe, D.
MATERIALS SCIENCE AND ENGINEERING A. Volume: 748 (2019) - 2019 • 135
Bimetallic silver-platinum nanoparticles with combined osteo-promotive and antimicrobial activity
Breisch, M. and Grasmik, V. and Loza, K. and Pappert, K. and Rostek, A. and Ziegler, N. and Ludwig, Al. and Heggen, M. and Epple, M. and Tiller, J.C. and Schildhauer, T.A. and Köller, M. and Sengstock, C.
NANOTECHNOLOGY. Volume: 30 (2019) - 2019 • 134
Nonbasal Slip Systems Enable a Strong and Ductile Hexagonal-Close-Packed High-Entropy Phase
Bu, Y. and Li, Z. and Liu, J. and Wang, H. and Raabe, D. and Yang, W.
PHYSICAL REVIEW LETTERS. Volume: 122 (2019) - 2019 • 133
Advances in in situ nanomechanical testing
Minor, A.M. and Dehm, G.
MRS BULLETIN. Volume: 44 (2019) - 2019 • 132
Creep properties of single crystal Ni-base superalloys (SX): A comparison between conventionally cast and additive manufactured CMSX-4 materials
Bürger, D. and Parsa, A.B. and Ramsperger, M. and Körner, C. and Eggeler, G.
MATERIALS SCIENCE AND ENGINEERING A. Volume: 762 (2019) - 2019 • 131
Aggregation control of Ru and Ir nanoparticles by tunable aryl alkyl imidazolium ionic liquids
Schmolke, L. and Lerch, S. and Bülow, M. and Siebels, M. and Schmitz, A. and Thomas, J. and Dehm, G. and Held, C. and Strassner, T. and Janiak, C.
NANOSCALE. Volume: 11 (2019) - 2019 • 130
Influence of composition and precipitation evolution on damage at grain boundaries in a crept polycrystalline Ni-based superalloy
Kontis, P. and Kostka, A. and Raabe, D. and Gault, B.
ACTA MATERIALIA. Volume: 166 (2019) - 2019 • 129
Oxygen-mediated deformation and grain refinement in Cu-Fe nanocrystalline alloys
Guo, J. and Duarte, M.J. and Zhang, Y. and Bachmaier, A. and Gammer, C. and Dehm, G. and Pippan, R. and Zhang, Z.
ACTA MATERIALIA. Volume: 166 (2019) - 2019 • 128
Shape-preserving machining produces gradient nanolaminate medium entropy alloys with high strain hardening capability
Guo, W. and Pei, Z. and Sang, X. and Poplawsky, J.D. and Bruschi, S. and Qu, J. and Raabe, D. and Bei, H.
ACTA MATERIALIA. Volume: 170 (2019) - 2019 • 127
Density, distribution and nature of planar faults in silver antimony telluride for thermoelectric applications
Abdellaoui, L. and Zhang, S. and Zaefferer, S. and Bueno-Villoro, R. and Baranovskiy, A. and Cojocaru-Mirédin, O. and Yu, Y. and Amouyal, Y. and Raabe, D. and Snyder, G.J. and Scheu, C.
ACTA MATERIALIA. Volume: 178 (2019) - 2019 • 126
Oxygen Evolution Electrocatalysis of a Single MOF-Derived Composite Nanoparticle on the Tip of a Nanoelectrode
Aiyappa, H.B. and Wilde, P. and Quast, T. and Masa, J. and Andronescu, C. and Chen, Y.-T. and Muhler, M. and Fischer, R.A. and Schuhmann, W.
ANGEWANDTE CHEMIE - INTERNATIONAL EDITION. Volume: 58 (2019) - 2019 • 125
On the mechanism of extraordinary strain hardening in an interstitial high-entropy alloy under cryogenic conditions
Wang, Z. and Lu, W. and Raabe, D. and Li, Z.
JOURNAL OF ALLOYS AND COMPOUNDS. Volume: (2019) - 2019 • 124
Tungsten carbide as a deoxidation agent for plasma-facing tungsten-based materials
Šestan, A. and Zavašnik, J. and Kržmanc, M.M. and Kocen, M. and Jenuš, P. and Novak, S. and Čeh, M. and Dehm, G.
JOURNAL OF NUCLEAR MATERIALS. Volume: 524 (2019) - 2019 • 123
Direct Growth of Highly Strained Pt Islands on Branched Ni Nanoparticles for Improved Hydrogen Evolution Reaction Activity
Alinezhad, A. and Gloag, L. and Benedetti, T.M. and Cheong, S. and Webster, R.F. and Roelsgaard, M. and Iversen, B.B. and Schuhmann, W. and Gooding, J.J. and Tilley, R.D.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY. Volume: 141 (2019) - 2019 • 122
On the compositional partitioning during phase transformation in a binary ferromagnetic MnAl alloy
Palanisamy, D. and Raabe, D. and Gault, B.
ACTA MATERIALIA. Volume: 174 (2019) - 2019 • 121
Strength of hydrogen-free and hydrogen-doped Ni50Ti50 shape memory platelets
Weiser, A. and Buršíková, V. and Jarý, M. and Dymáček, P. and Dugáček, J. and Frenzel, J. and Čermák, J. and Dlouhý, A.
SCRIPTA MATERIALIA. Volume: 162 (2019) - 2019 • 120
Strength of hydrogen-free and hydrogen-doped Ni 50 Ti 50 shape memory platelets
Weiser, A. and Buršíková, V. and Jarý, M. and Dymáček, P. and Dugáček, J. and Frenzel, J. and Čermák, J. and Dlouhý, A.
SCRIPTA MATERIALIA. Volume: 162 (2019) - 2019 • 119
Role of hole confinement in the recombination properties of InGaN quantum structures
Anikeeva, M. and Albrecht, M. and Mahler, F. and Tomm, J.W. and Lymperakis, L. and Chèze, C. and Calarco, R. and Neugebauer, J. and Schulz, T.
SCIENTIFIC REPORTS. Volume: 9 (2019) - 2019 • 118
On the evolution of dislocation cell structures in two Al-alloys (Al-5Mg and Al-11Zn) during reciprocal sliding wear at high homologous temperatures
Parsa, A.B. and Walter, M. and Theisen, W. and Bürger, D. and Eggeler, G.
WEAR. Volume: (2019) - 2019 • 117
Selective 2-Propanol Oxidation over Unsupported Co3O4 Spinel Nanoparticles: Mechanistic Insights into Aerobic Oxidation of Alcohols
Anke, S. and Bendt, G. and Sinev, I. and Hajiyani, H. and Antoni, H. and Zegkinoglou, I. and Jeon, H. and Pentcheva, R. and Roldan Cuenya, B. and Schulz, S. and Muhler, M.
ACS CATALYSIS. Volume: 9 (2019) - 2019 • 116
Achieving ultra-high strength and ductility in equiatomic CrCoNi with partially recrystallized microstructures
Slone, C.E. and Miao, J. and George, E.P. and Mills, M.J.
ACTA MATERIALIA. Volume: 165 (2019) - 2019 • 115
Composition of the nanosized orthorhombic O′ phase and its direct transformation to fine α during ageing in metastable β-Ti alloys
Li, T. and Lai, M. and Kostka, A. and Salomon, S. and Zhang, S. and Somsen, C. and Dargusch, M.S. and Kent, D.
SCRIPTA MATERIALIA. Volume: 170 (2019) - 2019 • 114
Elemental re-distribution inside shear bands revealed by correlative atom-probe tomography and electron microscopy in a deformed metallic glass
Balachandran, S. and Orava, J. and Köhler, M. and Breen, A.J. and Kaban, I. and Raabe, D. and Herbig, M.
SCRIPTA MATERIALIA. Volume: 168 (2019) - 2019 • 113
Crystal growth, microstructure, and physical properties of SrMnSb2
Liu, Y. and Ma, T. and Zhou, L. and Straszheim, W.E. and Islam, F. and Jensen, B.A. and Tian, W. and Heitmann, T. and Rosenberg, R.A. and Wilde, J.M. and Li, B. and Kreyssig, A. and Goldman, A.I. and Ueland, B.G. and McQueeney, R.J. and Vaknin, D.
PHYSICAL REVIEW B. Volume: 99 (2019) - 2019 • 112
Correlation between sputter deposition parameters and I-V characteristics in double-barrier memristive devices
Zahari, F. and Schlichting, F. and Strobel, J. and Dirkmann, S. and Cipo, J. and Gauter, S. and Trieschmann, J. and Marquardt, R. and Haberfehlner, G. and Kothleitner, G. and Kienle, L. and Mussenbrock, T. and Ziegler, M. and Kersten, H. and Kohlstedt, H.
JOURNAL OF VACUUM SCIENCE AND TECHNOLOGY B: NANOTECHNOLOGY AND MICROELECTRONICS. Volume: 37 (2019) - 2019 • 111
Multi-scale characterization of austenite reversion and martensite recovery in a cold-rolled medium-Mn steel
Benzing, J.T. and Kwiatkowski da Silva, A. and Morsdorf, L. and Bentley, J. and Ponge, D. and Dutta, A. and Han, J. and McBride, J.R. and Van Leer, B. and Gault, B. and Raabe, D. and Wittig, J.E.
ACTA MATERIALIA. Volume: 166 (2019) - 2019 • 110
Experimental and numerical study of mechanical properties of multi-phase medium-Mn TWIP-TRIP steel: Influences of strain rate and phase constituents
Benzing, J.T. and Liu, Y. and Zhang, X. and Luecke, W.E. and Ponge, D. and Dutta, A. and Oskay, C. and Raabe, D. and Wittig, J.E.
ACTA MATERIALIA. Volume: 177 (2019) - 2019 • 109
Synthesis, microstructure, and hardness of rapidly solidified Cu-Cr alloys
Garzón-Manjón, A. and Christiansen, L. and Kirchlechner, I. and Breitbach, B. and Liebscher, C.H. and Springer, H. and Dehm, G.
JOURNAL OF ALLOYS AND COMPOUNDS. Volume: 794 (2019) - 2018 • 108
Comparative biological effects of spherical noble metal nanoparticles (Rh, Pd, Ag, Pt, Au) with 4-8 nm diameter
Rostek, A. and Breisch, M. and Pappert, K. and Loza, K. and Heggen, M. and Köller, M. and Sengstock, C. and Epple, M.
BEILSTEIN JOURNAL OF NANOTECHNOLOGY. Volume: 9 (2018) - 2018 • 107
On the diffusive phase transformation mechanism assisted by extended dislocations during creep of a single crystal CoNi-based superalloy
Makineni, S.K. and Kumar, A. and Lenz, M. and Kontis, P. and Meiners, T. and Zenk, C. and Zaefferer, S. and Eggeler, G. and Neumeier, S. and Spiecker, E. and Raabe, D. and Gault, B.
ACTA MATERIALIA. Volume: 155 (2018) - 2018 • 106
Synthesis and stabilization of a new phase regime in a Mo-Si-B based alloy by laser-based additive manufacturing
Makineni, S.K. and Kini, A.R. and Jägle, E.A. and Springer, H. and Raabe, D. and Gault, B.
ACTA MATERIALIA. Volume: 151 (2018) - 2018 • 105
Carbide types in an advanced microalloyed bainitic/ferritic Cr–Mo Steel – TEM observations and thermodynamic calculations [Karbide in einem mikrolegierten bainitisch-ferritischen Cr–Mo-Stahl – TEM Charakterisierung und thermodynamische Berechnungen]
Wang, H. and Somsen, C. and Eggeler, G. and Detemple, E.
MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK. Volume: 49 (2018) - 2018 • 104
Ex situ and in situ TEM investigations of carbide precipitation in a 10Cr martensitic steel
Wang, H.
JOURNAL OF MATERIALS SCIENCE. Volume: 53 (2018) - 2018 • 103
Multiscale Characterization of Microstructure in Near-Surface Regions of a 16MnCr5 Gear Wheel After Cyclic Loading
Medghalchi, S. and Jamebozorgi, V. and Bala Krishnan, A. and Vincent, S. and Salomon, S. and Basir Parsa, A. and Pfetzing, J. and Kostka, A. and Li, Y. and Eggeler, G. and Li, T.
JOM. Volume: (2018) - 2018 • 102
Sulfur – induced embrittlement in high-purity, polycrystalline copper
Meiners, T. and Peng, Z. and Gault, B. and Liebscher, C.H. and Dehm, G.
ACTA MATERIALIA. Volume: 156 (2018) - 2018 • 101
Effects of strain rate on mechanical properties and deformation behavior of an austenitic Fe-25Mn-3Al-3Si TWIP-TRIP steel
Benzing, J.T. and Poling, W.A. and Pierce, D.T. and Bentley, J. and Findley, K.O. and Raabe, D. and Wittig, J.E.
MATERIALS SCIENCE AND ENGINEERING A. Volume: 711 (2018) - 2018 • 100
Crystallographic examination of the interaction between texture evolution, mechanically induced martensitic transformation and twinning in nanostructured bainite
Morales-Rivas, L. and Archie, F. and Zaefferer, S. and Benito-Alfonso, M. and Tsai, S.-P. and Yang, J.-R. and Raabe, D. and Garcia-Mateo, C. and Caballero, F.G.
JOURNAL OF ALLOYS AND COMPOUNDS. Volume: 752 (2018) - 2018 • 99
Towards Reproducible Fabrication of Nanometre-Sized Carbon Electrodes: Optimisation of Automated Nanoelectrode Fabrication by Means of Transmission Electron Microscopy
Wilde, P. and Quast, T. and Aiyappa, H.B. and Chen, Y.-T. and Botz, A. and Tarnev, T. and Marquitan, M. and Feldhege, S. and Lindner, A. and Andronescu, C. and Schuhmann, W.
CHEMELECTROCHEM. Volume: 5 (2018) - 2018 • 98
Subsurface characterization of high-strength high-interstitial austenitic steels after impact wear
Mujica Roncery, L. and Agudo Jácome, L. and Aghajani, A. and Theisen, W. and Weber, S.
WEAR. Volume: 402-403 (2018) - 2018 • 97
On the Ni-Ion release rate from surfaces of binary NiTi shape memory alloys
Ševčíková, J. and Bártková, D. and Goldbergová, M. and Kuběnová, M. and Čermák, J. and Frenzel, J. and Weiser, A. and Dlouhý, A.
APPLIED SURFACE SCIENCE. Volume: 427 (2018) - 2018 • 96
Modifying the nanostructure and the mechanical properties of Mo2BC hard coatings: Influence of substrate temperature during magnetron sputtering
Gleich, S. and Soler, R. and Fager, H. and Bolvardi, H. and Achenbach, J.-O. and Hans, M. and Primetzhofer, D. and Schneider, J.M. and Dehm, G. and Scheu, C.
MATERIALS AND DESIGN. Volume: 142 (2018) - 2018 • 95
Thermal stability of nanocomposite Mo2BC hard coatings deposited by magnetron sputtering
Gleich, S. and Breitbach, B. and Peter, N.J. and Soler, R. and Bolvardi, H. and Schneider, J.M. and Dehm, G. and Scheu, C.
SURFACE AND COATINGS TECHNOLOGY. Volume: 349 (2018) - 2018 • 94
Atomic scale analysis of grain boundary deuteride growth front in Zircaloy-4
Breen, A.J. and Mouton, I. and Lu, W. and Wang, S. and Szczepaniak, A. and Kontis, P. and Stephenson, L.T. and Chang, Y. and da Silva, A.K. and Liebscher, C.H. and Raabe, D. and Britton, T.B. and Herbig, M. and Gault, B.
SCRIPTA MATERIALIA. Volume: 156 (2018) - 2018 • 93
Synthesis of rare-earth metal and rare-earth metal-fluoride nanoparticles in ionic liquids and propylene carbonate
Siebels, M. and Mai, L. and Schmolke, L. and Schütte, K. and Barthel, J. and Yue, J. and Thomas, J. and Smarsly, B.M. and Devi, A. and Fischer, R.A. and Janiak, C.
BEILSTEIN JOURNAL OF NANOTECHNOLOGY. Volume: 9 (2018) - 2018 • 92
Ag-Segregation to Dislocations in PbTe-Based Thermoelectric Materials
Yu, Y. and Zhang, S. and Mio, A.M. and Gault, B. and Sheskin, A. and Scheu, C. and Raabe, D. and Zu, F. and Wuttig, M. and Amouyal, Y. and Cojocaru-Mirédin, O.
ACS APPLIED MATERIALS AND INTERFACES. Volume: 10 (2018) - 2018 • 91
Nano-laminated thin film metallic glass design for outstanding mechanical properties
Kontis, P. and Köhler, M. and Evertz, S. and Chen, Y.-T. and Schnabel, V. and Soler, R. and Bednarick, J. and Kirchlechner, C. and Dehm, G. and Raabe, D. and Schneider, J.M. and Gault, B.
SCRIPTA MATERIALIA. Volume: 155 (2018) - 2018 • 90
Synthesis and biological characterization of alloyed silver-platinum nanoparticles: From compact core-shell nanoparticles to hollow nanoalloys
Grasmik, V. and Breisch, M. and Loza, K. and Heggen, M. and Köller, M. and Sengstock, C. and Epple, M.
RSC ADVANCES. Volume: 8 (2018) - 2018 • 89
Fracture toughness of Mo2BC thin films: Intrinsic toughness versus system toughening
Soler, R. and Gleich, S. and Kirchlechner, C. and Scheu, C. and Schneider, J.M. and Dehm, G.
MATERIALS AND DESIGN. Volume: 154 (2018) - 2018 • 88
Microstructure and mechanical properties in the thin film system Cu-Zr
Oellers, T. and Raghavan, R. and Chakraborty, J. and Kirchlechner, C. and Kostka, A. and Liebscher, C.H. and Dehm, G. and Ludwig, Al.
THIN SOLID FILMS. Volume: 645 (2018) - 2018 • 87
How evolving multiaxial stress states affect the kinetics of rafting during creep of single crystal Ni-base superalloys
Cao, L. and Wollgramm, P. and Bürger, D. and Kostka, A. and Cailletaud, G. and Eggeler, G.
ACTA MATERIALIA. Volume: 158 (2018) - 2018 • 86
Mechanochemical synthesis of porous carbon at room temperature with a highly ordered sp2 microstructure
Casco, M.E. and Badaczewski, F. and Grätz, S. and Tolosa, A. and Presser, V. and Smarsly, B.M. and Borchardt, L.
CARBON. Volume: 139 (2018) - 2018 • 85
On the origin of the improvement of shape memory effect by precipitating VC in Fe–Mn–Si-based shape memory alloys
Lai, M.J. and Li, Y.J. and Lillpopp, L. and Ponge, D. and Will, S. and Raabe, D.
ACTA MATERIALIA. Volume: 155 (2018) - 2018 • 84
ω phase acts as a switch between dislocation channeling and joint twinning- and transformation-induced plasticity in a metastable β titanium alloy
Lai, M.J. and Li, T. and Raabe, D.
ACTA MATERIALIA. Volume: 151 (2018) - 2018 • 83
Deformation mechanisms, activated slip systems and critical resolved shear stresses in an Mg-LPSO alloy studied by micro-pillar compression
Chen, R. and Sandlöbes, S. and Zehnder, C. and Zeng, X. and Korte-Kerzel, S. and Raabe, D.
MATERIALS AND DESIGN. Volume: 154 (2018) - 2018 • 82
Elemental segregation to twin boundaries in a MnAl ferromagnetic Heusler alloy
Palanisamy, D. and Raabe, D. and Gault, B.
SCRIPTA MATERIALIA. Volume: 155 (2018) - 2018 • 81
Nucleation driving force for ω-assisted formation of α and associated ω morphology in β-Ti alloys
Li, T. and Kent, D. and Sha, G. and Liu, H. and Fries, S.G. and Ceguerra, A.V. and Dargusch, M.S. and Cairney, J.M.
SCRIPTA MATERIALIA. Volume: 155 (2018) - 2018 • 80
Strain-Induced Asymmetric Line Segregation at Faceted Si Grain Boundaries
Liebscher, C.H. and Stoffers, A. and Alam, M. and Lymperakis, L. and Cojocaru-Mirédin, O. and Gault, B. and Neugebauer, J. and Dehm, G. and Scheu, C. and Raabe, D.
PHYSICAL REVIEW LETTERS. Volume: 121 (2018) - 2018 • 79
Microstructure and mechanical properties of Al0.7CoCrFeNi high-entropy-alloy prepared by directional solidification
Liu, G. and Liu, L. and Liu, X. and Wang, Z. and Han, Z. and Zhang, G. and Kostka, A.
INTERMETALLICS. Volume: 93 (2018) - 2018 • 78
Formation of eta carbide in ferrous martensite by room temperature aging
Lu, W. and Herbig, M. and Liebscher, C.H. and Morsdorf, L. and Marceau, R.K.W. and Dehm, G. and Raabe, D.
ACTA MATERIALIA. Volume: 158 (2018) - 2018 • 77
Bidirectional Transformation Enables Hierarchical Nanolaminate Dual-Phase High-Entropy Alloys
Lu, W. and Liebscher, C.H. and Dehm, G. and Raabe, D. and Li, Z.
ADVANCED MATERIALS. Volume: 30 (2018) - 2018 • 76
Atomic Layer Deposition of Nickel on ZnO Nanowire Arrays for High-Performance Supercapacitors
Ren, Q.-H. and Zhang, Y. and Lu, H.-L. and Wang, Y.-P. and Liu, W.-J. and Ji, X.-M. and Devi, A. and Jiang, A.-Q. and Zhang, D.W.
ACS APPLIED MATERIALS AND INTERFACES. Volume: 10 (2018) - 2017 • 75
Nanophase Segregation of Self-Assembled Monolayers on Gold Nanoparticles
Meena, S.K. and Goldmann, C. and Nassoko, D. and Seydou, M. and Marchandier, T. and Moldovan, S. and Ersen, O. and Ribot, F. and Chanéac, C. and Sanchez, C. and Portehault, D. and Tielens, F. and Sulpizi, M.
ACS NANO. Volume: 11 (2017) - 2017 • 74
Coarsening of Y-rich oxide particles in 9%Cr-ODS Eurofer steel annealed at 1350 °C
Sandim, M.J.R. and Souza Filho, I.R. and Bredda, E.H. and Kostka, A. and Raabe, D. and Sandim, H.R.Z.
JOURNAL OF NUCLEAR MATERIALS. Volume: 484 (2017) - 2017 • 73
Surface optical phonon propagation in defect modulated nanowires
Venkatesan, S. and Mancabelli, T. and Krogstrup, P. and Hartschuh, A. and Dehm, G. and Scheu, C.
JOURNAL OF APPLIED PHYSICS. Volume: 121 (2017) - 2017 • 72
Nanostructure of and structural defects in a Mo2BC hard coating investigated by transmission electron microscopy and atom probe tomography
Gleich, S. and Fager, H. and Bolvardi, H. and Achenbach, J.-O. and Soler, R. and Pradeep, K.G. and Schneider, J.M. and Dehm, G. and Scheu, C.
JOURNAL OF APPLIED PHYSICS. Volume: 122 (2017) - 2017 • 71
Influence of rhenium on γ′-strengthened cobalt-base superalloys
Kolb, M. and Zenk, C.H. and Kirzinger, A. and Povstugar, I. and Raabe, D. and Neumeier, S. and Göken, M.
JOURNAL OF MATERIALS RESEARCH. Volume: 32 (2017) - 2017 • 70
Room temperature deformation of LPSO structures by non-basal slip
Chen, R. and Sandlöbes, S. and Zeng, X. and Li, D. and Korte-Kerzel, S. and Raabe, D.
MATERIALS SCIENCE AND ENGINEERING A. Volume: 682 (2017) - 2017 • 69
Experimental and Theoretical Understanding of Nitrogen-Doping-Induced Strong Metal-Support Interactions in Pd/TiO2 Catalysts for Nitrobenzene Hydrogenation
Chen, P. and Khetan, A. and Yang, F. and Migunov, V. and Weide, P. and Stürmer, S.P. and Guo, P. and Kähler, K. and Xia, W. and Mayer, J. and Pitsch, H. and Simon, U. and Muhler, M.
ACS CATALYSIS. Volume: 7 (2017) - 2017 • 68
Dislocation interaction and twinning-induced plasticity in face-centered cubic Fe-Mn-C micro-pillars
Choi, W.S. and Sandlöbes, S. and Malyar, N.V. and Kirchlechner, C. and Korte-Kerzel, S. and Dehm, G. and De Cooman, B.C. and Raabe, D.
ACTA MATERIALIA. Volume: 132 (2017) - 2017 • 67
Identification of a ternary μ-phase in the Co-Ti-W system – An advanced correlative thin-film and bulk combinatorial materials investigation
Naujoks, D. and Eggeler, Y.M. and Hallensleben, P. and Frenzel, J. and Fries, S.G. and Palumbo, M. and Koßmann, J. and Hammerschmidt, T. and Pfetzing-Micklich, J. and Eggeler, G. and Spiecker, E. and Drautz, R. and Ludwig, Al.
ACTA MATERIALIA. Volume: 138 (2017) - 2017 • 66
Role of Nanostructuring and Microstructuring in Silver Antimony Telluride Compounds for Thermoelectric Applications
Cojocaru-Mirédin, O. and Abdellaoui, L. and Nagli, M. and Zhang, S. and Yu, Y. and Scheu, C. and Raabe, D. and Wuttig, M. and Amouyal, Y.
ACS APPLIED MATERIALS AND INTERFACES. Volume: 9 (2017) - 2017 • 65
Formation of nanometer-sized Cu-Sn-Se particles in Cu2ZnSnSe4 thin-films and their effect on solar cell efficiency
Schwarz, T. and Cojocaru-Mirédin, O. and Mousel, M. and Redinger, A. and Raabe, D. and Choi, P.-P.
ACTA MATERIALIA. Volume: 132 (2017) - 2017 • 64
Confined chemical and structural states at dislocations in Fe-9wt%Mn steels: A correlative TEM-atom probe study combined with multiscale modelling
Kwiatkowski da Silva, A. and Leyson, G. and Kuzmina, M. and Ponge, D. and Herbig, M. and Sandlöbes, S. and Gault, B. and Neugebauer, J. and Raabe, D.
ACTA MATERIALIA. Volume: 124 (2017) - 2017 • 63
Stability, phase separation and oxidation of a supersaturated nanocrystalline Cu-33 at.% Cr thin film alloy
Harzer, T.P. and Dehm, G.
THIN SOLID FILMS. Volume: 623 (2017) - 2017 • 62
In–situ TEM study of diffusion kinetics and electron irradiation effects on the Cr phase separation of a nanocrystalline Cu–4 at.% Cr thin film alloy
Harzer, T.P. and Duarte, M.J. and Dehm, G.
JOURNAL OF ALLOYS AND COMPOUNDS. Volume: 695 (2017) - 2017 • 61
Reasons for the superior mechanical properties of medium-entropy CrCoNi compared to high-entropy CrMnFeCoNi
Laplanche, G. and Kostka, A. and Reinhart, C. and Hunfeld, J. and Eggeler, G. and George, E.P.
ACTA MATERIALIA. Volume: 128 (2017) - 2017 • 60
Transmission electron microscopy study of the microstructural evolution during higherature and low-stress (011) [11] shear creep deformation of the superalloy single crystal LEK 94
Agudo Jácome, L. and Göbenli, G. and Eggeler, G.
JOURNAL OF MATERIALS RESEARCH. Volume: 32 (2017) - 2017 • 59
Strengthening and strain hardening mechanisms in a precipitation-hardened high-Mn lightweight steel
Yao, M.J. and Welsch, E. and Ponge, D. and Haghighat, S.M.H. and Sandlöbes, S. and Choi, P. and Herbig, M. and Bleskov, I. and Hickel, T. and Lipinska-Chwalek, M. and Shanthraj, P. and Scheu, C. and Zaefferer, S. and Gault, B. and Raabe, D.
ACTA MATERIALIA. Volume: 140 (2017) - 2017 • 58
Annealing induced void formation in epitaxial Al thin films on sapphire (α-Al2O3)
Hieke, S.W. and Dehm, G. and Scheu, C.
ACTA MATERIALIA. Volume: 140 (2017) - 2017 • 57
In-situ tracking the structural and chemical evolution of nanostructured CuCr alloys
Zhang, Z. and Guo, J. and Dehm, G. and Pippan, R.
ACTA MATERIALIA. Volume: 138 (2017) - 2017 • 56
Electronic structure of metastable bcc Cu-Cr alloy thin films: Comparison of electron energy-loss spectroscopy and first-principles calculations
Liebscher, C.H. and Freysoldt, C. and Dennenwaldt, T. and Harzer, T.P. and Dehm, G.
ULTRAMICROSCOPY. Volume: 178 (2017) - 2017 • 55
Kinetics and crystallization path of a Fe-based metallic glass alloy
Duarte, M.J. and Kostka, A. and Crespo, D. and Jimenez, J.A. and Dippel, A.-C. and Renner, F.U. and Dehm, G.
ACTA MATERIALIA. Volume: 127 (2017) - 2017 • 54
Dislocation activities at the martensite phase transformation interface in metastable austenitic stainless steel: An in-situ TEM study
Liu, J. and Chen, C. and Feng, Q. and Fang, X. and Wang, H. and Liu, F. and Lu, J. and Raabe, D.
MATERIALS SCIENCE AND ENGINEERING A. Volume: 703 (2017) - 2017 • 53
Maintaining strength in supersaturated copper–chromium thin films annealed at 0.5 of the melting temperature of Cu
Raghavan, R. and Harzer, T.P. and Djaziri, S. and Hieke, S.W. and Kirchlechner, C. and Dehm, G.
JOURNAL OF MATERIALS SCIENCE. Volume: 52 (2017) - 2016 • 52
Structural and optical properties of (1122) InGaN quantum wells compared to (0001) and (1120)
Pristovsek, M. and Han, Y. and Zhu, T. and Oehler, F. and Tang, F. and Oliver, R.A. and Humphreys, C.J. and Tytko, D. and Choi, P.-P. and Raabe, D. and Brunner, F. and Weyers, M.
SEMICONDUCTOR SCIENCE AND TECHNOLOGY. Volume: 31 (2016) - 2016 • 51
Growth of bainitic ferrite and carbon partitioning during the early stages of bainite transformation in a 2 mass% silicon steel studied by in situ neutron diffraction, TEM and APT
Timokhina, I.B. and Liss, K.D. and Raabe, D. and Rakha, K. and Beladi, H. and Xiong, X.Y. and Hodgson, P.D.
JOURNAL OF APPLIED CRYSTALLOGRAPHY. Volume: 49 (2016) - 2016 • 50
Hollow Zn/Co Zeolitic Imidazolate Framework (ZIF) and Yolk-Shell Metal@Zn/Co ZIF Nanostructures
Rösler, C. and Aijaz, A. and Turner, S. and Filippousi, M. and Shahabi, A. and Xia, W. and Van Tendeloo, G. and Muhler, M. and Fischer, R.A.
CHEMISTRY - A EUROPEAN JOURNAL. Volume: 22 (2016) - 2016 • 49
Heat-Induced Phase Transformation of Three-Dimensional Nb3O7(OH) Superstructures: Effect of Atmosphere and Electron Beam
Betzler, S.B. and Harzer, T. and Ciston, J. and Dahmen, U. and Dehm, G. and Scheu, C.
CRYSTAL GROWTH AND DESIGN. Volume: 16 (2016) - 2016 • 48
High-Temperature Stable Ni Nanoparticles for the Dry Reforming of Methane
Mette, K. and Kühl, S. and Tarasov, A. and Willinger, M.G. and Kröhnert, J. and Wrabetz, S. and Trunschke, A. and Scherzer, M. and Girgsdies, F. and Düdder, H. and Kähler, K. and Ortega, K.F. and Muhler, M. and Schlögl, R. and Behrens, M. and Lunkenbein, T.
ACS CATALYSIS. Volume: 6 (2016) - 2016 • 47
The role of metastable LPSO building block clusters in phase transformations of an Mg-Y-Zn alloy
Kim, J.-K. and Ko, W.-S. and Sandlöbes, S. and Heidelmann, M. and Grabowski, B. and Raabe, D.
ACTA MATERIALIA. Volume: 112 (2016) - 2016 • 46
Use of small-angle X-ray scattering to resolve intracellular structure changes of Escherichia coli cells induced by antibiotic treatment
Von Gundlach, A.R. and Garamus, V.M. and Willey, T.M. and Ilavsky, J. and Hilpert, K. and Rosenhahn, A.
JOURNAL OF APPLIED CRYSTALLOGRAPHY. Volume: 49 (2016) - 2016 • 45
Multiple mechanisms of lath martensite plasticity
Morsdorf, L. and Jeannin, O. and Barbier, D. and Mitsuhara, M. and Raabe, D. and Tasan, C.C.
ACTA MATERIALIA. Volume: 121 (2016) - 2016 • 44
Phase selection and nanocrystallization in Cu-free soft magnetic FeSiNbB amorphous alloy upon rapid annealing
Morsdorf, L. and Pradeep, K.G. and Herzer, G. and Kovács, A. and Dunin-Borkowski, R.E. and Povstugar, I. and Konygin, G. and Choi, P. and Raabe, D.
JOURNAL OF APPLIED PHYSICS. Volume: 119 (2016) - 2016 • 43
Strain hardening by dynamic slip band refinement in a high-Mn lightweight steel
Welsch, E. and Ponge, D. and Hafez Haghighat, S.M. and Sandlöbes, S. and Choi, P. and Herbig, M. and Zaefferer, S. and Raabe, D.
ACTA MATERIALIA. Volume: 116 (2016) - 2016 • 42
Magnetic microstructure in a stress-annealed Fe73.5Si15.5B7Nb3Cu1 soft magnetic alloy observed using off-axis electron holography and Lorentz microscopy
Kovács, A. and Pradeep, K.G. and Herzer, G. and Raabe, D. and Dunin-Borkowski, R.E.
AIP ADVANCES. Volume: 6 (2016) - 2016 • 41
Zeolite Beta Formation from Clear Sols: Silicate Speciation, Particle Formation and Crystallization Monitored by Complementary Analysis Methods
Castro, M. and Haouas, M. and Lim, I. and Bongard, H.J. and Schüth, F. and Taulelle, F. and Karlsson, G. and Alfredsson, V. and Breyneart, E. and Kirschhock, C.E.A. and Schmidt, W.
CHEMISTRY - A EUROPEAN JOURNAL. Volume: 22 (2016) - 2016 • 40
The effect of stress, temperature and loading direction on the creep behaviour of Ni-base single crystal superalloy miniature tensile specimens
Wollgramm, P. and Bürger, D. and Parsa, A.B. and Neuking, K. and Eggeler, G.
MATERIALS AT HIGH TEMPERATURES. Volume: 33 (2016) - 2016 • 39
Double minimum creep of single crystal Ni-base superalloys
Wu, X. and Wollgramm, P. and Somsen, C. and Dlouhy, A. and Kostka, A. and Eggeler, G.
ACTA MATERIALIA. Volume: 112 (2016) - 2016 • 38
On the mechanism of {332} twinning in metastable β titanium alloys
Lai, M.J. and Tasan, C.C. and Raabe, D.
ACTA MATERIALIA. Volume: 111 (2016) - 2016 • 37
Microstructure evolution and critical stress for twinning in the CrMnFeCoNi high-entropy alloy
Laplanche, G. and Kostka, A. and Horst, O.M. and Eggeler, G. and George, E.P.
ACTA MATERIALIA. Volume: 118 (2016) - 2016 • 36
Autonomous Filling of Grain-Boundary Cavities during Creep Loading in Fe-Mo Alloys
Zhang, S. and Fang, H. and Gramsma, M.E. and Kwakernaak, C. and Sloof, W.G. and Tichelaar, F.D. and Kuzmina, M. and Herbig, M. and Raabe, D. and Brück, E. and van der Zwaag, S. and van Dijk, N.H.
METALLURGICAL AND MATERIALS TRANSACTIONS A: PHYSICAL METALLURGY AND MATERIALS SCIENCE. Volume: 47 (2016) - 2016 • 35
The role of ω in the precipitation of α in near-β Ti alloys
Li, T. and Kent, D. and Sha, G. and Cairney, J.M. and Dargusch, M.S.
SCRIPTA MATERIALIA. Volume: 117 (2016) - 2016 • 34
Decomposition of the single-phase high-entropy alloy CrMnFeCoNi after prolonged anneals at intermediate temperatures
Otto, F. and Dlouhý, A. and Pradeep, K.G. and Kuběnová, M. and Raabe, D. and Eggeler, G. and George, E.P.
ACTA MATERIALIA. Volume: 112 (2016) - 2016 • 33
New insights into the phase transformations to isothermal ω and ω-assisted α in near β-Ti alloys
Li, T. and Kent, D. and Sha, G. and Stephenson, L.T. and Ceguerra, A.V. and Ringer, S.P. and Dargusch, M.S. and Cairney, J.M.
ACTA MATERIALIA. Volume: 106 (2016) - 2016 • 32
Cr2O3 Nanoparticles on Ba5Ta4O15 as a Noble-Metal-Free Oxygen Evolution Co-Catalyst for Photocatalytic Overall Water Splitting
Soldat, J. and Busser, G.W. and Muhler, M. and Wark, M.
CHEMCATCHEM. Volume: 8 (2016) - 2016 • 31
Local Platinum Environments in a Solid Analogue of the Molecular Periana Catalyst
Soorholtz, M. and Jones, L.C. and Samuelis, D. and Weidenthaler, C. and White, R.J. and Titirici, M.-M. and Cullen, D.A. and Zimmermann, T. and Antonietti, M. and Maier, J. and Palkovits, R. and Chmelka, B.F. and Schüth, F.
ACS CATALYSIS. Volume: 6 (2016) - 2016 • 30
Beam-induced atomic migration at Ag-containing nanofacets at an asymmetric Cu grain boundary
Peter, N.J. and Liebscher, C.H. and Kirchlechner, C. and Dehm, G.
JOURNAL OF MATERIALS RESEARCH. Volume: 32 (2016) - 2016 • 29
Are Mo2BC nanocrystalline coatings damage resistant? Insights from comparative tension experiments
Djaziri, S. and Gleich, S. and Bolvardi, H. and Kirchlechner, C. and Hans, M. and Scheu, C. and Schneider, J.M. and Dehm, G.
SURFACE AND COATINGS TECHNOLOGY. Volume: 289 (2016) - 2015 • 28
The influence of partitioning on the growth of intragranular α in near-β Ti alloys
Li, T. and Ahmed, M. and Sha, G. and Shi, R. and Casillas, G. and Yen, H.-W. and Wang, Y. and Pereloma, E.V. and Cairney, J.M.
JOURNAL OF ALLOYS AND COMPOUNDS. Volume: 643 (2015) - 2015 • 27
The mechanism of ω-assisted α phase formation in near β-Ti alloys
Li, T. and Kent, D. and Sha, G. and Dargusch, M.S. and Cairney, J.M.
SCRIPTA MATERIALIA. Volume: 104 (2015) - 2015 • 26
Reversible or Not? Distinguishing Agglomeration and Aggregation at the Nanoscale
Sokolov, S.V. and Tschulik, K. and Batchelor-McAuley, C. and Jurkschat, K. and Compton, R.G.
ANALYTICAL CHEMISTRY. Volume: 87 (2015) - 2015 • 25
Damage resistance in gum metal through cold work-induced microstructural heterogeneity
Zhang, J.-L. and Tasan, C.C. and Lai, M.L. and Zhang, J. and Raabe, D.
JOURNAL OF MATERIALS SCIENCE. Volume: 50 (2015) - 2015 • 24
Stability of Dealloyed Porous Pt/Ni Nanoparticles
Baldizzone, C. and Gan, L. and Hodnik, N. and Keeley, G.P. and Kostka, A. and Heggen, M. and Strasser, P. and Mayrhofer, K.J.J.
ACS CATALYSIS. Volume: 5 (2015) - 2015 • 23
Complex Nanotwin Substructure of an Asymmetric Σ9 Tilt Grain Boundary in a Silicon Polycrystal
Stoffers, A. and Ziebarth, B. and Barthel, J. and Cojocaru-Mirédin, O. and Elsässer, C. and Raabe, D.
PHYSICAL REVIEW LETTERS. Volume: 115 (2015) - 2015 • 22
High-quality functionalized few-layer graphene: Facile fabrication and doping with nitrogen as a metal-free catalyst for the oxygen reduction reaction
Sun, Z. and Masa, J. and Weide, P. and Fairclough, S.M. and Robertson, A.W. and Ebbinghaus, P. and Warner, J.H. and Tsang, S.C.E. and Muhler, M. and Schuhmann, W.
JOURNAL OF MATERIALS CHEMISTRY A. Volume: 3 (2015) - 2015 • 21
Microstructure design and mechanical properties in a near-α Ti-4Mo alloy
Tarzimoghadam, Z. and Sandlöbes, S. and Pradeep, K.G. and Raabe, D.
ACTA MATERIALIA. Volume: 97 (2015) - 2015 • 20
Microstructural evolution in a Ti-Ta hightemperature shape memory alloy during creep
Rynko, R. and Marquardt, A. and Paulsen, A. and Frenzel, J. and Somsen, C. and Eggeler, G.
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH. Volume: 106 (2015) - 2015 • 19
Uniform 2 nm gold nanoparticles supported on iron oxides as active catalysts for CO oxidation reaction: Structure-activity relationship
Guo, Y. and Gu, D. and Jin, Z. and Du, P.-P. and Si, R. and Tao, J. and Xu, W.-Q. and Huang, Y.-Y. and Senanayake, S. and Song, Q.-S. and Jia, C.-J. and Schüth, F.
NANOSCALE. Volume: 7 (2015) - 2015 • 18
Size and orientation effects in partial dislocation-mediated deformation of twinning-induced plasticity steel micro-pillars
Choi, W.S. and De Cooman, B.C. and Sandlöbes, S. and Raabe, D.
ACTA MATERIALIA. Volume: 98 (2015) - 2015 • 17
Deformation mechanism of ω-enriched Ti-Nb-based gum metal: Dislocation channeling and deformation induced ω-β transformation
Lai, M.J. and Tasan, C.C. and Raabe, D.
ACTA MATERIALIA. Volume: 100 (2015) - 2014 • 16
Separating strain from composition in unit cell parameter maps obtained from aberration corrected high resolution transmission electron microscopy imaging
Schulz, T. and Duff, A. and Remmele, T. and Korytov, M. and Markurt, T. and Albrecht, M. and Lymperakis, L. and Neugebauer, J. and Cheze, C. and Skierbiszewski, C.
JOURNAL OF APPLIED PHYSICS. Volume: 115 (2014) - 2014 • 15
Transmission electron microscopy and ferromagnetic resonance investigations of tunnel magnetic junctions using Co2MnGe Heusler alloys as magnetic electrodes
Belmeguenai, M. and Genevois, C. and Zighem, F. and Roussigné, Y. and Chérif, S.M. and Westerholt, K. and El Bahoui, A. and Fnidiki, A. and Moch, P.
THIN SOLID FILMS. Volume: 551 (2014) - 2014 • 14
On the physical nature of tribolayers and wear debris after sliding wear in a superalloy/steel tribosystem at 25 and 300°C
Rynio, C. and Hattendorf, H. and Klöwer, J. and Eggeler, G.
WEAR. Volume: 317 (2014) - 2013 • 13
Preparation of cubic ordered mesoporous silicon carbide monoliths by pressure assisted preceramic polymer nanocasting
Wang, J. and Oschatz, M. and Biemelt, T. and Lohe, M.R. and Borchardt, L. and Kaskel, S.
MICROPOROUS AND MESOPOROUS MATERIALS. Volume: 168 (2013) - 2013 • 12
Magnetization dynamics in Co2MnGe/Al2O3/Co tunnel junctions grown on different substrates
Belmeguenai, M. and Tuzcuoglu, H. and Zighem, F. and Chérif, S.-M. and Roussigné, Y. and Westerholt, K. and Moch, P. and El Bahoui, A. and Genevois, C. and Fnidiki, A.
SENSOR LETTERS. Volume: 11 (2013) - 2013 • 11
Composition-dependent crystal structure and martensitic transformation in Heusler Ni-Mn-Sn alloys
Zheng, H. and Wang, W. and Xue, S. and Zhai, Q. and Frenzel, J. and Luo, Z.
ACTA MATERIALIA. Volume: 61 (2013) - 2013 • 10
Blocking growth by an electrically active subsurface layer: The effect of si as an antisurfactant in the growth of GaN
Markurt, T. and Lymperakis, L. and Neugebauer, J. and Drechsel, P. and Stauss, P. and Schulz, T. and Remmele, T. and Grillo, V. and Rotunno, E. and Albrecht, M.
PHYSICAL REVIEW LETTERS. Volume: 110 (2013) - 2013 • 9
Basal and non-basal dislocation slip in Mg–Y
Sandlöbes, S. and Friák, M. and Neugebauer, J. and Raabe, D.
MATERIALS SCIENCE AND ENGINEERING A. Volume: 576 (2013) - 2012 • 8
Growth optimization and characterization of lattice-matched Al 0.82In 0.18N optical confinement layer for edge emitting nitride laser diodes
Kim-Chauveau, H. and Frayssinet, E. and Damilano, B. and De Mierry, P. and Bodiou, L. and Nguyen, L. and Vennéguès, P. and Chauveau, J.-M. and Cordier, Y. and Duboz, J.Y. and Charash, R. and Vajpeyi, A. and Lamy, J.-M. and Akhter, M. and Maaskant, P.P. and Corbett, B. and Hangleiter, A. and Wieck, A.
JOURNAL OF CRYSTAL GROWTH. Volume: 338 (2012) - 2011 • 7
Structural and magnetic characterization of self-assembled iron oxide nanoparticle arrays
Benitez, M.J. and Mishra, D. and Szary, P. and Badini Confalonieri, G.A. and Feyen, M. and Lu, A.H. and Agudo, L. and Eggeler, G. and Petracic, O. and Zabel, H.
JOURNAL OF PHYSICS CONDENSED MATTER. Volume: 23 (2011) - 2010 • 6
Growth of single-crystal mesoporous carbons with im 3̄ m symmetry
Gu, D. and Bongard, H. and Meng, Y. and Miyasaka, K. and Terasaki, O. and Zhang, F. and Deng, Y. and Wu, Z. and Feng, D. and Fang, Y. and Tu, B. and Schüth, F. and Zhao, D.
CHEMISTRY OF MATERIALS. Volume: 22 (2010) - 2010 • 5
Where Does the Lithium Go? - A Study of the Precipitates in the Stir Zone of a Friction Stir Weld in a Li-containing 2xxx Series Al Alloy
Rao, J.C. and Payton, E.J. and Somsen, C. and Neuking, K. and Eggeler, G. and Kostka, A. and Dos Santos, J.F.
ADVANCED ENGINEERING MATERIALS. Volume: 12 (2010) - 2010 • 4
Structural characterization of a Cu/MgO(001) interface using C S-corrected HRTEM
Cazottes, S. and Zhang, Z.L. and Daniel, R. and Chawla, J.S. and Gall, D. and Dehm, G.
THIN SOLID FILMS. Volume: 519 (2010) - 2010 • 3
The ferromagnetic shape memory system Fe-Pd-Cu
Hamann, S. and Gruner, M.E. and Irsen, S. and Buschbeck, J. and Bechtold, C. and Kock, I. and Mayr, S.G. and Savan, A. and Thienhaus, S. and Quandt, E. and Fähler, S. and Entel, P. and Ludwig, Al.
ACTA MATERIALIA. Volume: 58 (2010) - 2010 • 2
Annealing behavior of ferritic-martensitic 9%Cr-ODS-Eurofer steel
Sandim, H.R.Z. and Renzetti, R.A. and Padilha, A.F. and Raabe, D. and Klimenkov, M. and Lindau, R. and Möslang, A.
MATERIALS SCIENCE AND ENGINEERING A. Volume: 527 (2010) - 2010 • 1
Epitaxially stabilized TiN/(Ti,Fe,Co)N multilayer thin films in (pseudo-)fcc crystal structure by sequential magnetron sputter deposition
Klever, C. and Seemann, K. and Stüber, M. and Ulrich, S. and Brunken, H. and Ludwig, Al. and Leiste, H.
JOURNAL OF PHYSICS D: APPLIED PHYSICS. Volume: 43 (2010)