- Ruhr-Universität Bochum
Scientific output
Publications
Below, you can either scroll through the complete list of our annually published research in peer-reviewed journals or search for a specific author or keyword via the free text search.
- 2023 • 148
Cyclic deformation behavior of an equiatomic CrFeNi multi-principal element alloy
Sisodia, S. and Rajkowski, M. and Laplanche, G. and Chauhan, A.
INTERNATIONAL JOURNAL OF FATIGUE. Volume: 174 (2023) - 2023 • 147
Hardening effect of diffusible hydrogen on BCC Fe-based model alloys by in situ backside hydrogen charging
Rao, J. and Lee, S. and Dehm, G. and Duarte, M. J.
MATERIALS AND DESIGN. Volume: 232 (2023) - 2023 • 146
Site occupancies in a chemically complex σ-phase from the high-entropy Cr–Mn–Fe–Co–Ni system
Joubert, J. and Kalchev, Y. and Fantin, A. and Crivello, J. and Zehl, R. and Elkaim, E. and Laplanche, G.
ACTA MATERIALIA. Volume: 259 (2023) - 2023 • 145
Cooperative deformation mechanisms in a fatigued CoCrNi multi-principal element alloy: A case of low stacking fault energy
Lu, K. and Chauhan, A. and Litvinov, D. and Schneider, M. and Laplanche, G. and Aktaa, J.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS. Volume: 180 (2023) - 2023 • 144
Effect of grain size on critical twinning stress and work hardening behavior in the equiatomic CrMnFeCoNi high-entropy alloy
Wagner, C. and Laplanche, G.
INTERNATIONAL JOURNAL OF PLASTICITY. Volume: 166 (2023) - 2023 • 143
Increasing the friction stress decreases the size dependence of strength in a family of face-centered cubic high- and medium-entropy alloy micropillars
Pfetzing-Micklich, J. and Fox, F. and Thome, P. and George, E.P. and Eggeler, G.
MATERIALS SCIENCE AND ENGINEERING: A. Volume: 885 (2023) - 2023 • 142
Off-stoichiometric softening and polytypic transformations in the plastic deformation of the C14 Fe2Nb Laves phase
Ladines, A.N. and Drautz, R. and Hammerschmidt, T.
ACTA MATERIALIA. Volume: 260 (2023) - 2023 • 141
Magnetic bond-order potential for iron-cobalt alloys
Egorov, A. and Subramanyam, A. P. A. and Yuan, Z. and Drautz, R. and Hammerschmidt, T.
PHYSICAL REVIEW MATERIALS. Volume: 7 (2023) - 2023 • 140
SOI Integrated Micromagnets for Mechanical Magnetic Field Detection
Schmitt, P. and Gojdka, B. and Lisec, T. and Kroll, M. and Hoffmann, M.
IEEE SENSORS LETTERS. Volume: 7 (2023) - 2022 • 139
Exploring stability of a nanoscale complex solid solution thin film by in situ heating transmission electron microscopy
Manjón, A.G. and Zhang, S. and Völker, B. and Meischein, M. and Ludwig, Al. and Scheu, C.
MRS BULLETIN. Volume: (2022) - 2022 • 138
Ab initio investigations of point and complex defect structures in B2-FeAl
Sözen, H.I. and Mendive-Tapia, E. and Hickel, T. and Neugebauer, J.
PHYSICAL REVIEW MATERIALS. Volume: 6 (2022) - 2022 • 137
Combinatorial sputter deposition of CrMnFeCoNi high entropy alloy thin films on agitated particles
Lourens, F. and Ludwig, Al.
SURFACE AND COATINGS TECHNOLOGY. Volume: 449 (2022) - 2022 • 136
Influence of machining on the surface integrity of high- and medium-entropy alloys
Richter, T. and Schroepfer, D. and Rhode, M. and Boerner, A. and Neumann, R.S. and Schneider, M. and Laplanche, G.
MATERIALS CHEMISTRY AND PHYSICS. Volume: 275 (2022) - 2022 • 135
Elevated-temperature cyclic deformation mechanisms of CoCrNi in comparison to CoCrFeMnNi
Lu, K. and Knöpfle, F. and Chauhan, A. and Litvinov, D. and Schneider, M. and Laplanche, G. and Aktaa, J.
SCRIPTA MATERIALIA. Volume: 220 (2022) - 2022 • 134
Effects of Cr/Ni ratio on physical properties of Cr-Mn-Fe-Co-Ni high-entropy alloys
Wagner, C. and Ferrari, A. and Schreuer, J. and Couzinié, J.-P. and Ikeda, Y. and Körmann, F. and Eggeler, G. and George, E.P. and Laplanche, G.
ACTA MATERIALIA. Volume: 227 (2022) - 2022 • 133
Inner relaxations in equiatomic single-phase high-entropy cantor alloy
Smekhova, A. and Kuzmin, A. and Siemensmeyer, K. and Abrudan, R. and Reinholz, U. and Buzanich, A.G. and Schneider, M. and Laplanche, G. and Yusenko, K.V.
JOURNAL OF ALLOYS AND COMPOUNDS. Volume: 920 (2022) - 2022 • 132
Influence of Mo/Cr ratio on the lamellar microstructure and mechanical properties of as-cast Al0.75CoCrFeNi compositionally complex alloys
Asabre, A. and Gemagami, P. and Parsa, A.B. and Wagner, C. and Kostka, A. and Laplanche, G.
JOURNAL OF ALLOYS AND COMPOUNDS. Volume: 899 (2022) - 2022 • 131
NdFeB Magnets with Well-Pronounced Anisotropic Magnetic Properties Made by Electric Current-Assisted Sintering
Prasad Mishra, T. and Leich, L. and Krengel, M. and Weber, S. and Röttger, A. and Bram, M.
ADVANCED ENGINEERING MATERIALS. Volume: (2022) - 2021 • 130
Ab initio based models for temperature-dependent magnetochemical interplay in bcc Fe-Mn alloys
Schneider, A. and Fu, C.-C. and Waseda, O. and Barreteau, C. and Hickel, T.
PHYSICAL REVIEW B. Volume: 103 (2021) - 2021 • 129
Symbiotic crystal-glass alloys via dynamic chemical partitioning
Wu, G. and Liu, C. and Brognara, A. and Ghidelli, M. and Bao, Y. and Liu, S. and Wu, X. and Xia, W. and Zhao, H. and Rao, J. and Ponge, D. and Devulapalli, V. and Lu, W. and Dehm, G. and Raabe, D. and Li, Z.
MATERIALS TODAY. Volume: (2021) - 2021 • 128
In situ nanoindentation during electrochemical hydrogen charging: a comparison between front-side and a novel back-side charging approach
Duarte, M.J. and Fang, X. and Rao, J. and Krieger, W. and Brinckmann, S. and Dehm, G.
JOURNAL OF MATERIALS SCIENCE. Volume: 56 (2021) - 2021 • 127
Effects of temperature on mechanical properties and deformation mechanisms of the equiatomic CrFeNi medium-entropy alloy
Schneider, M. and Laplanche, G.
ACTA MATERIALIA. Volume: 204 (2021) - 2021 • 126
Subcritical crack growth in hard alloys under cyclic loading
Brackmann, L. and Röttger, A. and Weber, S. and Theisen, W.
FATIGUE AND FRACTURE OF ENGINEERING MATERIALS AND STRUCTURES. Volume: 44 (2021) - 2021 • 125
Welding of high-entropy alloys and compositionally complex alloys—an overview
Rhode, M. and Richter, T. and Schroepfer, D. and Manzoni, A.M. and Schneider, M. and Laplanche, G.
WELDING IN THE WORLD. Volume: (2021) - 2021 • 124
Tracer diffusion in the σ phase of the CoCrFeMnNi system
Zhang, J. and Muralikrishna, G.M. and Asabre, A. and Kalchev, Y. and Müller, J. and Butz, B. and Hilke, S. and Rösner, H. and Laplanche, G. and Divinski, S.V. and Wilde, G.
ACTA MATERIALIA. Volume: 203 (2021) - 2021 • 123
Automated assessment of a kinetic database for fcc Co-Cr-Fe-Mn-Ni high entropy alloys
Abrahams, K. and Zomorodpoosh, S. and Khorasgani, A.R. and Roslyakova, I. and Steinbach, I. and Kundin, J.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING. Volume: 29 (2021) - 2021 • 122
3d transition-metal high-entropy Invar alloy developed by adjusting the valence-electron concentration
Rao, Z. and Cąklr, A. and Özgün, Ö. and Ponge, D. and Raabe, D. and Li, Z. and Acet, M.
PHYSICAL REVIEW MATERIALS. Volume: 5 (2021) - 2021 • 121
Superior low-cycle fatigue properties of CoCrNi compared to CoCrFeMnNi
Lu, K. and Chauhan, A. and Walter, M. and Tirunilai, A.S. and Schneider, M. and Laplanche, G. and Freudenberger, J. and Kauffmann, A. and Heilmaier, M. and Aktaa, J.
SCRIPTA MATERIALIA. Volume: 194 (2021) - 2021 • 120
High-Temperature Oxidation in Dry and Humid Atmospheres of the Equiatomic CrMnFeCoNi and CrCoNi High- and Medium-Entropy Alloys
Stephan-Scherb, C. and Schulz, W. and Schneider, M. and Karafiludis, S. and Laplanche, G.
OXIDATION OF METALS. Volume: 95 (2021) - 2021 • 119
Tensile creep properties of a CrMnFeCoNi high-entropy alloy
Zhang, M. and George, E.P. and Gibeling, J.C.
SCRIPTA MATERIALIA. Volume: 194 (2021) - 2021 • 118
Twins – A weak link in the magnetic hardening of ThMn12-type permanent magnets
Ener, S. and Skokov, K.P. and Palanisamy, D. and Devillers, T. and Fischbacher, J. and Eslava, G.G. and Maccari, F. and Schäfer, L. and Diop, L.V.B. and Radulov, I. and Gault, B. and Hrkac, G. and Dempsey, N.M. and Schrefl, T. and Raabe, D. and Gutfleisch, O.
ACTA MATERIALIA. Volume: 214 (2021) - 2021 • 117
Impact of magnetic transition on Mn diffusion in α -iron: Correlative state-of-the-art theoretical and experimental study
Hegde, O. and Kulitckii, V. and Schneider, A. and Soisson, F. and Hickel, T. and Neugebauer, J. and Wilde, G. and Divinski, S. and Fu, C.-C.
PHYSICAL REVIEW B. Volume: 104 (2021) - 2021 • 116
Ultrastrong and Ductile Soft Magnetic High-Entropy Alloys via Coherent Ordered Nanoprecipitates
Han, L. and Rao, Z. and Souza Filho, I.R. and Maccari, F. and Wei, Y. and Wu, G. and Ahmadian, A. and Zhou, X. and Gutfleisch, O. and Ponge, D. and Raabe, D. and Li, Z.
ADVANCED MATERIALS. Volume: 33 (2021) - 2021 • 115
Discovery and Implications of Hidden Atomic-Scale Structure in a Metallic Meteorite
Kovács, A. and Lewis, L.H. and Palanisamy, D. and Denneulin, T. and Schwedt, A. and Scott, E.R.D. and Gault, B. and Raabe, D. and Dunin-Borkowski, R.E. and Charilaou, M.
NANO LETTERS. Volume: 21 (2021) - 2021 • 114
Structure and hardness of in situ synthesized nano-oxide strengthened CoCrFeNi high entropy alloy thin films
Lee, S. and Chatain, D. and Liebscher, C.H. and Dehm, G.
SCRIPTA MATERIALIA. Volume: 203 (2021) - 2021 • 113
Reducing hot tearing by grain boundary segregation engineering in additive manufacturing: example of an AlxCoCrFeNi high-entropy alloy
Sun, Z. and Tan, X. and Wang, C. and Descoins, M. and Mangelinck, D. and Tor, S.B. and Jägle, E.A. and Zaefferer, S. and Raabe, D.
ACTA MATERIALIA. Volume: 204 (2021) - 2021 • 112
Atomic scale understanding of phase stability and decomposition of a nanocrystalline CrMnFeCoNi Cantor alloy
Li, Y.J. and Savan, A. and Ludwig, A.
APPLIED PHYSICS LETTERS. Volume: 119 (2021) - 2021 • 111
Plasticity induced by nanoindentation in a CrCoNi medium-entropy alloy studied by accurate electron channeling contrast imaging revealing dislocation-low angle grain boundary interactions
Habiyaremye, F. and Guitton, A. and Schäfer, F. and Scholz, F. and Schneider, M. and Frenzel, J. and Laplanche, G. and Maloufi, N.
MATERIALS SCIENCE AND ENGINEERING A. Volume: 817 (2021) - 2021 • 110
Effect of synthesis temperature on the phase formation of NiTiAlFeCr compositionally complex alloy thin films
Marshal, A. and Singh, P. and Music, D. and Wolff-Goodrich, S. and Evertz, S. and Schökel, A. and Johnson, D.D. and Dehm, G. and Liebscher, C.H. and Schneider, J.M.
JOURNAL OF ALLOYS AND COMPOUNDS. Volume: 854 (2021) - 2021 • 109
Combinatorial exploration of B2/L21 precipitation strengthened AlCrFeNiTi compositionally complex alloys
Wolff-Goodrich, S. and Marshal, A. and Pradeep, K.G. and Dehm, G. and Schneider, J.M. and Liebscher, C.H.
JOURNAL OF ALLOYS AND COMPOUNDS. Volume: 853 (2021) - 2021 • 108
Comparing the Activity of Complex Solid Solution Electrocatalysts Using Inflection Points of Voltammetric Activity Curves as Activity Descriptors
Löffler, T. and Waag, F. and Gökce, B. and Ludwig, Al. and Barcikowski, S. and Schuhmann, W.
ACS CATALYSIS. Volume: 11 (2021) - 2020 • 107
Grain boundary segregation, phase formation, and their influence on the coercivity of rapidly solidified SmF e11Ti hard magnetic alloys
Palanisamy, D. and Ener, S. and Maccari, F. and Schäfer, L. and Skokov, K.P. and Gutfleisch, O. and Raabe, D. and Gault, B.
PHYSICAL REVIEW MATERIALS. Volume: 4 (2020) - 2020 • 106
Dislocation-induced breakthrough of strength and ductility trade-off in a non-equiatomic high-entropy alloy
Guo, W. and Su, J. and Lu, W. and Liebscher, C.H. and Kirchlechner, C. and Ikeda, Y. and Körmann, F. and Liu, X. and Xue, Y. and Dehm, G.
ACTA MATERIALIA. Volume: 185 (2020) - 2020 • 105
Growth kinetics of σ-phase precipitates and underlying diffusion processes in CrMnFeCoNi high-entropy alloys
Laplanche, G.
ACTA MATERIALIA. Volume: 199 (2020) - 2020 • 104
Analysis of strengthening due to grain boundaries and annealing twin boundaries in the CrCoNi medium-entropy alloy
Schneider, M. and George, E.P. and Manescau, T.J. and Záležák, T. and Hunfeld, J. and Dlouhý, A. and Eggeler, G. and Laplanche, G.
INTERNATIONAL JOURNAL OF PLASTICITY. Volume: 124 (2020) - 2020 • 103
Early stage phase separation of AlCoCr0.75Cu0.5FeNi high-entropy powder at the nanoscale
Peter, N.J. and Duarte, M.J. and Liebscher, C.H. and Srivastava, V.C. and Uhlenwinkel, V. and Jägle, E.A. and Dehm, G.
JOURNAL OF ALLOYS AND COMPOUNDS. Volume: 820 (2020) - 2020 • 102
Sputter deposition of highly active complex solid solution electrocatalysts into an ionic liquid library: Effect of structure and composition on oxygen reduction activity
Manjón, A.G. and Löffler, T. and Meischein, M. and Meyer, H. and Lim, J. and Strotkötter, V. and Schuhmann, W. and Ludwig, Al. and Scheu, C.
NANOSCALE. Volume: 12 (2020) - 2020 • 101
Structure zone investigation of multiple principle element alloy thin films as optimization for nanoindentation measurements
Savan, A. and Allermann, T. and Wang, X. and Grochla, D. and Banko, L. and Kalchev, Y. and Kostka, A. and Pfetzing-Micklich, J. and Ludwig, Al.
MATERIALS. Volume: 13 (2020) - 2020 • 100
Impact of magnetism on the phase stability of rare-earth based hard magnetic materials
Sözen, H.İ. and Hickel, T. and Neugebauer, J.
CALPHAD: COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY. Volume: 68 (2020) - 2020 • 99
Beyond Solid Solution High-Entropy Alloys: Tailoring Magnetic Properties via Spinodal Decomposition
Rao, Z. and Dutta, B. and Körmann, F. and Lu, W. and Zhou, X. and Liu, C. and da Silva, A.K. and Wiedwald, U. and Spasova, M. and Farle, M. and Ponge, D. and Gault, B. and Neugebauer, J. and Raabe, D. and Li, Z.
ADVANCED FUNCTIONAL MATERIALS. Volume: (2020) - 2020 • 98
Unveiling the mechanism of abnormal magnetic behavior of FeNiCoMnCu high-entropy alloys through a joint experimental-theoretical study
Rao, Z. and Dutta, B. and Körmann, F. and Ponge, D. and Li, L. and He, J. and Stephenson, L. and Schäfer, L. and Skokov, K. and Gutfleisch, O. and Raabe, D. and Li, Z.
PHYSICAL REVIEW MATERIALS. Volume: 4 (2020) - 2020 • 97
Trivalent iron rich CoFe layered oxyhydroxides for electrochemical water oxidation
Weiß, S. and Ertl, M. and Varhade, S.D. and Radha, A.V. and Schuhmann, W. and Breu, J. and Andronescu, C.
ELECTROCHIMICA ACTA. Volume: 350 (2020) - 2020 • 96
Generalized stability criterion for exploiting optimized mechanical properties by a general correlation between phase transformations and plastic deformations
Huang, L. and Lin, W. and Zhang, Y. and Feng, D. and Li, Y. and Chen, X. and Niu, K. and Liu, F.
ACTA MATERIALIA. Volume: 201 (2020) - 2020 • 95
Microstructure evolution and thermal stability of equiatomic CoCrFeNi films on (0001) α-Al2O3
Addab, Y. and Kini, M.K. and Courtois, B. and Savan, A. and Ludwig, Al. and Bozzolo, N. and Scheu, C. and Dehm, G. and Chatain, D.
ACTA MATERIALIA. Volume: 200 (2020) - 2020 • 94
Short-range order in face-centered cubic VCoNi alloys
Kostiuchenko, T. and Ruban, A.V. and Neugebauer, J. and Shapeev, A. and Körmann, F.
PHYSICAL REVIEW MATERIALS. Volume: 4 (2020) - 2020 • 93
Grain boundary energy effect on grain boundary segregation in an equiatomic high-entropy alloy
Li, L. and Kamachali, R.D. and Li, Z. and Zhang, Z.
PHYSICAL REVIEW MATERIALS. Volume: 4 (2020) - 2020 • 92
Atomic scale configuration of planar defects in the Nb-rich C14 Laves phase NbFe2
Šlapáková, M. and Zendegani, A. and Liebscher, C.H. and Hickel, T. and Neugebauer, J. and Hammerschmidt, T. and Ormeci, A. and Grin, J. and Dehm, G. and Kumar, K.S. and Stein, F.
ACTA MATERIALIA. Volume: 183 (2020) - 2020 • 91
Interfacial nanophases stabilize nanotwins in high-entropy alloys
Lu, W. and Liebscher, C.H. and Yan, F. and Fang, X. and Li, L. and Li, J. and Guo, W. and Dehm, G. and Raabe, D. and Li, Z.
ACTA MATERIALIA. Volume: 185 (2020) - 2020 • 90
Unfolding the complexity of phonon quasi-particle physics in disordered materials
Mu, S. and Olsen, R.J. and Dutta, B. and Lindsay, L. and Samolyuk, G.D. and Berlijn, T. and Specht, E.D. and Jin, K. and Bei, H. and Hickel, T. and Larson, B.C. and Stocks, G.M.
NPJ COMPUTATIONAL MATERIALS. Volume: 6 (2020) - 2020 • 89
Nanocrystalline Sm-based 1:12 magnets
Schönhöbel, A.M. and Madugundo, R. and Barandiarán, J.M. and Hadjipanayis, G.C. and Palanisamy, D. and Schwarz, T. and Gault, B. and Raabe, D. and Skokov, K. and Gutfleisch, O. and Fischbacher, J. and Schrefl, T.
ACTA MATERIALIA. Volume: 200 (2020) - 2020 • 88
Comparison of cryogenic deformation of the concentrated solid solutions CoCrFeMnNi, CoCrNi and CoNi
Tirunilai, A.S. and Hanemann, T. and Reinhart, C. and Tschan, V. and Weiss, K.-P. and Laplanche, G. and Freudenberger, J. and Heilmaier, M. and Kauffmann, A.
MATERIALS SCIENCE AND ENGINEERING A. Volume: 783 (2020) - 2020 • 87
Correlative chemical and structural investigations of accelerated phase evolution in a nanocrystalline high entropy alloy
Li, Y.J. and Kostka, A. and Savan, A. and Ludwig, Al.
SCRIPTA MATERIALIA. Volume: 183 (2020) - 2020 • 86
Phase decomposition in a nanocrystalline CrCoNi alloy
Li, Y.J. and Kostka, A. and Savan, A. and Ludwig, Al.
SCRIPTA MATERIALIA. Volume: 188 (2020) - 2020 • 85
Nanoglass–Nanocrystal Composite—a Novel Material Class for Enhanced Strength–Plasticity Synergy
Katnagallu, S. and Wu, G. and Singh, S.P. and Nandam, S.H. and Xia, W. and Stephenson, L.T. and Gleiter, H. and Schwaiger, R. and Hahn, H. and Herbig, M. and Raabe, D. and Gault, B. and Balachandran, S.
SMALL. Volume: 16 (2020) - 2020 • 84
High temperature creep resistance of a thermally stable nanocrystalline Fe-5 at.% Zr steel
Shan, G.B. and Chen, Y.Z. and Li, Y.J. and Zhang, C.Y. and Dong, H. and Cong, Y.B. and Zhang, W.X. and Huang, L.K. and Suo, T. and Liu, F.
SCRIPTA MATERIALIA. Volume: 179 (2020) - 2020 • 83
Synthesis of plasmonic Fe/Al nanoparticles in ionic liquids
Schmitz, A. and Meyer, H. and Meischein, M. and Garzón Manjón, A. and Schmolke, L. and Giesen, B. and Schlüsener, C. and Simon, P. and Grin, Y. and Fischer, R.A. and Scheu, C. and Ludwig, Al. and Janiak, C.
RSC ADVANCES. Volume: 10 (2020) - 2020 • 82
Trimetallic Mn-Fe-Ni Oxide Nanoparticles Supported on Multi-Walled Carbon Nanotubes as High-Performance Bifunctional ORR/OER Electrocatalyst in Alkaline Media
Morales, D.M. and Kazakova, M.A. and Dieckhöfer, S. and Selyutin, A.G. and Golubtsov, G.V. and Schuhmann, W. and Masa, J.
ADVANCED FUNCTIONAL MATERIALS. Volume: 30 (2020) - 2020 • 81
The sum is more than its parts: stability of MnFe oxide nanoparticles supported on oxygen-functionalized multi-walled carbon nanotubes at alternating oxygen reduction reaction and oxygen evolution reaction conditions
Morales, D.M. and Kazakova, M.A. and Purcel, M. and Masa, J. and Schuhmann, W.
JOURNAL OF SOLID STATE ELECTROCHEMISTRY. Volume: 24 (2020) - 2020 • 80
High entropy alloys: A focused review of mechanical properties and deformation mechanisms
George, E.P. and Curtin, W.A. and Tasan, C.C.
ACTA MATERIALIA. Volume: 188 (2020) - 2019 • 79
Oxygen-mediated deformation and grain refinement in Cu-Fe nanocrystalline alloys
Guo, J. and Duarte, M.J. and Zhang, Y. and Bachmaier, A. and Gammer, C. and Dehm, G. and Pippan, R. and Zhang, Z.
ACTA MATERIALIA. Volume: 166 (2019) - 2019 • 78
Nonbasal Slip Systems Enable a Strong and Ductile Hexagonal-Close-Packed High-Entropy Phase
Bu, Y. and Li, Z. and Liu, J. and Wang, H. and Raabe, D. and Yang, W.
PHYSICAL REVIEW LETTERS. Volume: 122 (2019) - 2019 • 77
Ballistic rectification based on inhomogeneous magnetic stray fields
Szelong, M. and Ludwig, Ar. and Wieck, A.D. and Kunze, U.
JOURNAL OF APPLIED PHYSICS. Volume: 125 (2019) - 2019 • 76
Iron Aluminides
Palm, M. and Stein, F. and Dehm, G.
ANNUAL REVIEW OF MATERIALS RESEARCH. Volume: 49 (2019) - 2019 • 75
Impact of interstitial C on phase stability and stacking-fault energy of the CrMnFeCoNi high-entropy alloy
Ikeda, Y. and Tanaka, I. and Neugebauer, J. and Körmann, F.
PHYSICAL REVIEW MATERIALS. Volume: 3 (2019) - 2019 • 74
Ab initio phase stabilities of Ce-based hard magnetic materials and comparison with experimental phase diagrams
Sözen, H.Ä. and Ener, S. and MacCari, F. and Skokov, K.P. and Gutfleisch, O. and Körmann, F. and Neugebauer, J. and Hickel, T.
PHYSICAL REVIEW MATERIALS. Volume: 3 (2019) - 2019 • 73
Multi-scale characterization of austenite reversion and martensite recovery in a cold-rolled medium-Mn steel
Benzing, J.T. and Kwiatkowski da Silva, A. and Morsdorf, L. and Bentley, J. and Ponge, D. and Dutta, A. and Han, J. and McBride, J.R. and Van Leer, B. and Gault, B. and Raabe, D. and Wittig, J.E.
ACTA MATERIALIA. Volume: 166 (2019) - 2019 • 72
Strengthening of a CrMnFeCoNi high-entropy alloy by carbide precipitation
Gao, N. and Lu, D.H. and Zhao, Y.Y. and Liu, X.W. and Liu, G.H. and Wu, Y. and Liu, G. and Fan, Z.T. and Lu, Z.P. and George, E.P.
JOURNAL OF ALLOYS AND COMPOUNDS. Volume: (2019) - 2019 • 71
Joint contribution of transformation and twinning to the high strength-ductility combination of a FeMnCoCr high entropy alloy at cryogenic temperatures
He, Z.F. and Jia, N. and Ma, D. and Yan, H.L. and Li, Z.M. and Raabe, D.
MATERIALS SCIENCE AND ENGINEERING A. Volume: 759 (2019) - 2019 • 70
Invar effects in FeNiCo medium entropy alloys: From an Invar treasure map to alloy design
Rao, Z. and Ponge, D. and Körmann, F. and Ikeda, Y. and Schneeweiss, O. and Friák, M. and Neugebauer, J. and Raabe, D. and Li, Z.
INTERMETALLICS. Volume: 111 (2019) - 2019 • 69
Influence of phase decomposition on mechanical behavior of an equiatomic CoCuFeMnNi high entropy alloy
MacDonald, B.E. and Fu, Z. and Wang, X. and Li, Z. and Chen, W. and Zhou, Y. and Raabe, D. and Schoenung, J. and Hahn, H. and Lavernia, E.J.
ACTA MATERIALIA. Volume: 181 (2019) - 2019 • 68
Segregation-driven grain boundary spinodal decomposition as a pathway for phase nucleation in a high-entropy alloy
Li, L. and Li, Z. and Kwiatkowski da Silva, A. and Peng, Z. and Zhao, H. and Gault, B. and Raabe, D.
ACTA MATERIALIA. Volume: 178 (2019) - 2019 • 67
On the onset of deformation twinning in the CrFeMnCoNi high-entropy alloy using a novel tensile specimen geometry
Thurston, K.V.S. and Hohenwarter, A. and Laplanche, G. and George, E.P. and Gludovatz, B. and Ritchie, R.O.
INTERMETALLICS. Volume: 110 (2019) - 2019 • 66
Additive manufacturing of soft magnetic permalloy from Fe and Ni powders: Control of magnetic anisotropy
Schönrath, H. and Spasova, M. and Kilian, S.O. and Meckenstock, R. and Witt, G. and Sehrt, J.T. and Farle, M.
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS. Volume: 478 (2019) - 2019 • 65
Thermodynamics of grain boundary segregation, interfacial spinodal and their relevance for nucleation during solid-solid phase transitions
Kwiatkowski da Silva, A. and Kamachali, R.D. and Ponge, D. and Gault, B. and Neugebauer, J. and Raabe, D.
ACTA MATERIALIA. Volume: 168 (2019) - 2019 • 64
On the mechanism of extraordinary strain hardening in an interstitial high-entropy alloy under cryogenic conditions
Wang, Z. and Lu, W. and Raabe, D. and Li, Z.
JOURNAL OF ALLOYS AND COMPOUNDS. Volume: (2019) - 2019 • 63
Concentration-dependent atomic mobilities in FCC CoCrFeMnNi high-entropy alloys
Gaertner, D. and Abrahams, K. and Kottke, J. and Esin, V.A. and Steinbach, I. and Wilde, G. and Divinski, S.V.
ACTA MATERIALIA. Volume: 166 (2019) - 2019 • 62
Optimizing the synthesis of Co/Co–Fe nanoparticles/N-doped carbon composite materials as bifunctional oxygen electrocatalysts
Medina, D. and Barwe, S. and Masa, J. and Seisel, S. and Schuhmann, W. and Andronescu, C.
ELECTROCHIMICA ACTA. Volume: 318 (2019) - 2019 • 61
Elemental re-distribution inside shear bands revealed by correlative atom-probe tomography and electron microscopy in a deformed metallic glass
Balachandran, S. and Orava, J. and Köhler, M. and Breen, A.J. and Kaban, I. and Raabe, D. and Herbig, M.
SCRIPTA MATERIALIA. Volume: 168 (2019) - 2019 • 60
Fe/Co/Ni mixed oxide nanoparticles supported on oxidized multi-walled carbon nanotubes as electrocatalysts for the oxygen reduction and the oxygen evolution reactions in alkaline media
Kazakova, M.A. and Morales, D.M. and Andronescu, C. and Elumeeva, K. and Selyutin, A.G. and Ishchenko, A.V. and Golubtsov, G.V. and Dieckhöfer, S. and Schuhmann, W. and Masa, J.
CATALYSIS TODAY. Volume: (2019) - 2019 • 59
On the influence of the heat treatment on microstructure formation and mechanical properties of near-α Ti-Fe alloys
Sandlöbes, S. and Korte-Kerzel, S. and Raabe, D.
MATERIALS SCIENCE AND ENGINEERING A. Volume: 748 (2019) - 2018 • 58
High resolution, binder-free investigation of the intrinsic activity of immobilized NiFe LDH nanoparticles on etched carbon nanoelectrodes
Wilde, P. and Barwe, S. and Andronescu, C. and Schuhmann, W. and Ventosa, E.
NANO RESEARCH. Volume: 11 (2018) - 2018 • 57
Phase stability and kinetics of σ-phase precipitation in CrMnFeCoNi high-entropy alloys
Laplanche, G. and Berglund, S. and Reinhart, C. and Kostka, A. and Fox, F. and George, E.P.
ACTA MATERIALIA. Volume: 161 (2018) - 2018 • 56
Thermal activation parameters of plastic flow reveal deformation mechanisms in the CrMnFeCoNi high-entropy alloy
Laplanche, G. and Bonneville, J. and Varvenne, C. and Curtin, W.A. and George, E.P.
ACTA MATERIALIA. Volume: 143 (2018) - 2018 • 55
Origin of the low magnetic moment in Fe2AlTi: An Ab initio study
Friák, M. and Slávik, A. and Miháliková, I. and Holec, D. and Všianská, M. and Šob, M. and Palm, M. and Neugebauer, J.
MATERIALS. Volume: 11 (2018) - 2018 • 54
Atomic scale analysis of grain boundary deuteride growth front in Zircaloy-4
Breen, A.J. and Mouton, I. and Lu, W. and Wang, S. and Szczepaniak, A. and Kontis, P. and Stephenson, L.T. and Chang, Y. and da Silva, A.K. and Liebscher, C.H. and Raabe, D. and Britton, T.B. and Herbig, M. and Gault, B.
SCRIPTA MATERIALIA. Volume: 156 (2018) - 2018 • 53
Misorientation distribution between martensite and austenite in Fe-31 wt%Ni-0.01 wt%C
Zilnyk, K.D. and Almeida Junior, D.R. and Sandim, H.R.Z. and Rios, P.R. and Raabe, D.
ACTA MATERIALIA. Volume: 143 (2018) - 2018 • 52
Competition between formation of carbides and reversed austenite during tempering of a medium-manganese steel studied by thermodynamic-kinetic simulations and atom probe tomography
Kwiatkowski da Silva, A. and Inden, G. and Kumar, A. and Ponge, D. and Gault, B. and Raabe, D.
ACTA MATERIALIA. Volume: 147 (2018) - 2018 • 51
Microstructure and mechanical properties of Al0.7CoCrFeNi high-entropy-alloy prepared by directional solidification
Liu, G. and Liu, L. and Liu, X. and Wang, Z. and Han, Z. and Zhang, G. and Kostka, A.
INTERMETALLICS. Volume: 93 (2018) - 2018 • 50
Boron doped ultrastrong and ductile high-entropy alloys
Seol, J.B. and Bae, J.W. and Li, Z. and Chan Han, J. and Kim, J.G. and Raabe, D. and Kim, H.S.
ACTA MATERIALIA. Volume: 151 (2018) - 2018 • 49
Hydrogen embrittlement of an interstitial equimolar high-entropy alloy
Luo, H. and Li, Z. and Lu, W. and Ponge, D. and Raabe, D.
CORROSION SCIENCE. Volume: 136 (2018) - 2018 • 48
On the nature of twin boundary-associated strengthening in Fe-Mn-C steel
Choi, W.S. and Sandlöbes, S. and Malyar, N.V. and Kirchlechner, C. and Korte-Kerzel, S. and Dehm, G. and Choi, P.-P. and Raabe, D.
SCRIPTA MATERIALIA. Volume: 156 (2018) - 2018 • 47
Hardness and modulus of Fe2B, Fe3(C,B), and Fe23(C,B)6 borides and carboborides in the Fe-C-B system
Lentz, J. and Röttger, A. and Theisen, W.
MATERIALS CHARACTERIZATION. Volume: 135 (2018) - 2017 • 46
High-throughput study of binary thin film tungsten alloys
Nikolić, V. and Wurster, S. and Savan, A. and Ludwig, Al. and Pippan, R.
INTERNATIONAL JOURNAL OF REFRACTORY METALS AND HARD MATERIALS. Volume: 69 (2017) - 2017 • 45
Kinetics and crystallization path of a Fe-based metallic glass alloy
Duarte, M.J. and Kostka, A. and Crespo, D. and Jimenez, J.A. and Dippel, A.-C. and Renner, F.U. and Dehm, G.
ACTA MATERIALIA. Volume: 127 (2017) - 2017 • 44
Electronic and molecular structure relations in diiron compounds mimicking the [FeFe]-hydrogenase active site studied by X-ray spectroscopy and quantum chemistry
Kositzki, R. and Mebs, S. and Schüth, N. and Leidel, N. and Schwartz, L. and Karnahl, M. and Wittkamp, F. and Daunke, D. and Grohmann, A. and Apfel, U.-P. and Gloaguen, F. and Ott, S. and Haumann, M.
DALTON TRANSACTIONS. Volume: 46 (2017) - 2017 • 43
Insights into the deformation behavior of the CrMnFeCoNi high-entropy alloy revealed by elevated temperature nanoindentation
Maier-Kiener, V. and Schuh, B. and George, E.P. and Clemens, H. and Hohenwarter, A.
JOURNAL OF MATERIALS RESEARCH. Volume: 32 (2017) - 2017 • 42
Ab initio assisted design of quinary dual-phase high-entropy alloys with transformation-induced plasticity
Li, Z. and Körmann, F. and Grabowski, B. and Neugebauer, J. and Raabe, D.
ACTA MATERIALIA. Volume: 136 (2017) - 2016 • 41
Phase selection and nanocrystallization in Cu-free soft magnetic FeSiNbB amorphous alloy upon rapid annealing
Morsdorf, L. and Pradeep, K.G. and Herzer, G. and Kovács, A. and Dunin-Borkowski, R.E. and Povstugar, I. and Konygin, G. and Choi, P. and Raabe, D.
JOURNAL OF APPLIED PHYSICS. Volume: 119 (2016) - 2016 • 40
Mechanism of the Fe3(B,C) and Fe23(C,B)6 solid-state transformation in the hypoeutectic region of the Fe-C-B system
Lentz, J. and Röttger, A. and Theisen, W.
ACTA MATERIALIA. Volume: 119 (2016) - 2015 • 39
Dynamic strain-induced transformation: An atomic scale investigation
Zhang, H. and Pradeep, K.G. and Mandal, S. and Ponge, D. and Springer, H. and Raabe, D.
SCRIPTA MATERIALIA. Volume: 109 (2015) - 2015 • 38
Evolution of the Laves Phase in Ferritic Heat-Resistant Steels During Long-term Annealing and its Influence on the High-Temperature Strength
Nabiran, N. and Klein, S. and Weber, S. and Theisen, W.
METALLURGICAL AND MATERIALS TRANSACTIONS A: PHYSICAL METALLURGY AND MATERIALS SCIENCE. Volume: 46 (2015) - 2015 • 37
Relationship Between Damping Capacity and Variations of Vacancies Concentration and Segregation of Carbon Atom in an Fe-Mn Alloy
Wen, Y. and Xiao, H. and Peng, H. and Li, N. and Raabe, D.
METALLURGICAL AND MATERIALS TRANSACTIONS A: PHYSICAL METALLURGY AND MATERIALS SCIENCE. Volume: 46 (2015) - 2015 • 36
Grain boundary segregation engineering and austenite reversion turn embrittlement into toughness: Example of a 9 wt.% medium Mn steel
Kuzmina, M. and Ponge, D. and Raabe, D.
ACTA MATERIALIA. Volume: 86 (2015) - 2015 • 35
Structural stability of Fe-based topologically close-packed phases
Ladines, A.N. and Hammerschmidt, T. and Drautz, R.
INTERMETALLICS. Volume: 59 (2015) - 2015 • 34
The crystallographic template effect assisting the formation of stable α-Al2O3 during low temperature oxidation of Fe-Al alloys
Brito, P. and Pinto, H. and Kostka, A.
CORROSION SCIENCE. Volume: (2015) - 2015 • 33
From high-entropy alloys to high-entropy steels
Raabe, D. and Tasan, C.C. and Springer, H. and Bausch, M.
STEEL RESEARCH INTERNATIONAL. Volume: 86 (2015) - 2015 • 32
Atomic scale study of CU clustering and pseudo-homogeneous Fe-Si nanocrystallization in soft magnetic FeSiNbB(CU) alloys
Pradeep, K.G. and Herzer, G. and Raabe, D.
ULTRAMICROSCOPY. Volume: 159 (2015) - 2015 • 31
Solidification and phase formation of alloys in the hypoeutectic region of the Fe-C-B system
Lentz, J. and Röttger, A. and Theisen, W.
ACTA MATERIALIA. Volume: 99 (2015) - 2014 • 30
Designing Heusler nanoprecipitates by elastic misfit stabilization in Fe-Mn maraging steels
Millán, J. and Sandlöbes, S. and Al-Zubi, A. and Hickel, T. and Choi, P. and Neugebauer, J. and Ponge, D. and Raabe, D.
ACTA MATERIALIA. Volume: 76 (2014) - 2014 • 29
Impact of Mn on the solution enthalpy of hydrogen in austenitic Fe-Mn alloys: A first-principles study
Von Appen, J. and Dronskowski, R. and Chakrabarty, A. and Hickel, T. and Spatschek, R. and Neugebauer, J.
JOURNAL OF COMPUTATIONAL CHEMISTRY. Volume: 35 (2014) - 2014 • 28
Synthesis, characterization, and nanoindentation response of single crystal Fe-Cr-Ni alloys with FCC and BCC structures
Xia, Y.Z. and Bei, H. and Gao, Y.F. and Catoor, D. and George, E.P.
MATERIALS SCIENCE AND ENGINEERING A. Volume: 611 (2014) - 2014 • 27
Alloy Design, Combinatorial Synthesis, and Microstructure–Property Relations for Low-Density Fe-Mn-Al-C Austenitic Steels
Raabe, D. and Springer, H. and Gutierrez-Urrutia, I. and Roters, F. and Bausch, M. and Seol, J.-B. and Koyama, M. and Choi, P.-P. and Tsuzaki, K.
JOM. Volume: 66 (2014) - 2014 • 26
Vacancy strengthening in Fe3Al iron aluminides
Hasemann, G. and Schneibel, J.H. and Krüger, M. and George, E.P.
INTERMETALLICS. Volume: 54 (2014) - 2013 • 25
Nanocrystalline Fe-C alloys produced by ball milling of iron and graphite
Chen, Y.Z. and Herz, A. and Li, Y.J. and Borchers, C. and Choi, P. and Raabe, D. and Kirchheim, R.
ACTA MATERIALIA. Volume: 61 (2013) - 2013 • 24
Asymmetric superconducting spin valves based on the Fe/V layer system grown on MgO(100)
Nowak, G. and Westerholt, K. and Zabel, H.
SUPERCONDUCTOR SCIENCE AND TECHNOLOGY. Volume: 26 (2013) - 2013 • 23
Spatial Distributions of Alloying Elements Obtained from Atom Probe Tomography of the Amorphous Ribbon Fe75C11Si2B8Cr4
Shin, J. and Yi, S. and Pradeep, K.G. and Choi, P.P. and Raabe, D.
KOREAN JOURNAL OF MATERIALS RESEARCH. Volume: 23 (2013) - 2013 • 22
Compositional trends and magnetic excitations in binary and ternary Fe-Pd-X magnetic shape memory alloys
Gruner, M.E. and Hamann, S. and Brunken, H. and Ludwig, Al. and Entel, P.
JOURNAL OF ALLOYS AND COMPOUNDS. Volume: 577 (2013) - 2013 • 21
Atomic-scale compositional characterization of a nanocrystalline AlCrCuFeNiZn high-entropy alloy using atom probe tomography
Pradeep, K.G. and Wanderka, N. and Choi, P. and Banhart, J. and Murty, B.S. and Raabe, D.
ACTA MATERIALIA. Volume: 61 (2013) - 2012 • 20
First-principles study of the thermodynamic and elastic properties of eutectic Fe-Ti alloys
Zhu, L.-F. and Friák, M. and Dick, A. and Grabowski, B. and Hickel, T. and Liot, F. and Holec, D. and Schlieter, A. and Kühn, U. and Eckert, J. and Ebrahimi, Z. and Emmerich, H. and Neugebauer, J.
ACTA MATERIALIA. Volume: 60 (2012) - 2012 • 19
Spark plasma sintering synthesis and mechanical spectroscopy of the ω-Al 0.7Cu 0.2Fe 0.1 phase
Laplanche, G. and Gadaud, P. and Bonneville, J. and Joulain, A. and Gauthier-Brunet, V. and Dubois, S. and Jay, F.
JOURNAL OF MATERIALS SCIENCE. Volume: 47 (2012) - 2012 • 18
Micropatterning of Fe-based bulk metallic glass surfaces by pulsed electrochemical micromachining
Sueptitz, R. and Tschulik, K. and Becker, C. and Stoica, M. and Uhlemann, M. and Eckert, J. and Gebert, A.
JOURNAL OF MATERIALS RESEARCH. Volume: 27 (2012) - 2012 • 17
Elastic properties of face-centred cubic Fe-Mn-C studied by nanoindentation and ab initio calculations
Reeh, S. and Music, D. and Gebhardt, T. and Kasprzak, M. and Jäpel, T. and Zaefferer, S. and Raabe, D. and Richter, S. and Schwedt, A. and Mayer, J. and Wietbrock, B. and Hirt, G. and Schneider, J.M.
ACTA MATERIALIA. Volume: 60 (2012) - 2012 • 16
Thermodynamic and physical properties of FeAl and Fe 3Al: An atomistic study by EAM simulation
Ouyang, Y. and Tong, X. and Li, C. and Chen, H. and Tao, X. and Hickel, T. and Du, Y.
PHYSICA B: CONDENSED MATTER. Volume: 407 (2012) - 2011 • 15
Compositional dependence of the compressive yield strength of Fe-Nb(-Al) and Co-Nb Laves phases
Voß, S. and Palm, M. and Stein, F. and Raabe, D.
MATERIALS RESEARCH SOCIETY SYMPOSIUM PROCEEDINGS. Volume: 1295 (2011) - 2011 • 14
Development and characterization of novel corrosion-resistant TWIP steels
Mujica, L. and Weber, S. and Hunold, G. and Theisen, W.
STEEL RESEARCH INTERNATIONAL. Volume: 82 (2011) - 2011 • 13
Effect of boron on the fracture behavior and grain boundary chemistry of Ni3Fe
Liu, Y. and Liu, C.T. and Heatherly, L. and George, E.P.
SCRIPTA MATERIALIA. Volume: 64 (2011) - 2011 • 12
The influence of additions of Al and Si on the lattice stability of fcc and hcp Fe-Mn random alloys
Gebhardt, T. and Music, D. and Ekholm, M. and Abrikosov, I.A. and Vitos, L. and Dick, A. and Hickel, T. and Neugebauer, J. and Schneider, J.M.
JOURNAL OF PHYSICS CONDENSED MATTER. Volume: 23 (2011) - 2010 • 11
Synthesis and brittle-to-ductile transition of the ω-Al0.7Cu0.2Fe0.1 tetragonal phase
Laplanche, G. and Joulain, A. and Bonneville, J. and Gauthier-Brunet, V. and Dubois, S.
MATERIALS SCIENCE AND ENGINEERING A. Volume: 527 (2010) - 2010 • 10
Microstructures and mechanical properties of Al-base composite materials reinforced by Al-Cu-Fe particles
Laplanche, G. and Joulain, A. and Bonneville, J. and Schaller, R. and El Kabir, T.
JOURNAL OF ALLOYS AND COMPOUNDS. Volume: 493 (2010) - 2010 • 9
Combined ab initio and experimental study of structural and elastic properties of Fe3Al-based ternaries
Friák, M. and Deges, J. and Krein, R. and Frommeyer, G. and Neugebauer, J.
INTERMETALLICS. Volume: 18 (2010) - 2010 • 8
Ab initio study of the anomalous volume-composition dependence in Fe-Al alloys
Friák, M. and Neugebauer, J.
INTERMETALLICS. Volume: 18 (2010) - 2010 • 7
Orientation dependence of local lattice rotations at precipitates: Example of κ-Fe3AlC carbides in a Fe3Al-based alloy
Kobayashi, S. and Zambaldi, C. and Raabe, D.
ACTA MATERIALIA. Volume: 58 (2010) - 2010 • 6
The ferromagnetic shape memory system Fe-Pd-Cu
Hamann, S. and Gruner, M.E. and Irsen, S. and Buschbeck, J. and Bechtold, C. and Kock, I. and Mayr, S.G. and Savan, A. and Thienhaus, S. and Quandt, E. and Fähler, S. and Entel, P. and Ludwig, Al.
ACTA MATERIALIA. Volume: 58 (2010) - 2010 • 5
Diffusivities of an Al-Fe-Ni melt and their effects on the microstructure during solidification
Zhang, L. and Du, Y. and Steinbach, I. and Chen, Q. and Huang, B.
ACTA MATERIALIA. Volume: 58 (2010) - 2010 • 4
A comparative study of (Fe, Fe3Si)/GaAs and Heusler/MgO for spintronics applications
Grünebohm, A. and Siewert, M. and Herper, H.C. and Gruner, M.E. and Entel, P.
JOURNAL OF PHYSICS: CONFERENCE SERIES. Volume: 200 (2010) - 2010 • 3
Electrocrystallisation of metallic films under the influence of an external homogeneous magnetic field - Early stages of the layer growth
Koza, J.A. and Mogi, I. and Tschulik, K. and Uhlemann, M. and Mickel, C. and Gebert, A. and Schultz, L.
ELECTROCHIMICA ACTA. Volume: 55 (2010) - 2010 • 2
Correlation of phase transformations and magnetic properties in annealed epitaxial Fe-Pd magnetic shape memory alloy films
Buschbeck, J. and Hamann, S. and Ludwig, Al. and Holzapfel, B. and Schultz, L. and Fähler, S.
JOURNAL OF APPLIED PHYSICS. Volume: 107 (2010) - 2010 • 1
L21-ordered Fe-Al-Ti alloys
Krein, R. and Friak, M. and Neugebauer, J. and Palm, M. and Heilmaier, M.
INTERMETALLICS. Volume: 18 (2010)