- Ruhr-Universität Bochum

Interfacial reactions drive all elemental cycling on Earth and play pivotal roles in human activities such as agriculture, water purification, energy production and storage, environmental contaminant remediation, and nuclear waste repository management. The onset of the 21st century marked the beginning of a more detailed understanding of mineral aqueous interfaces enabled by advances in techniques that use tunable high-flux focused ultrafast laser and X-ray sources to provide near-atomic measurement resolution, as well as by nanofabrication approaches that enable transmission electron microscopy in a liquid cell. This leap into atomic- and nanometer-scale measurements has uncovered scale-dependent phenomena whose reaction thermodynamics, kinetics, and pathways deviate from previous observations made on larger systems. A second key advance is new experimental evidence for what scientists hypothesized but could not test previously, namely, interfacial chemical reactions are frequently driven by "anomalies" or "non-idealities" such as defects, nanoconfinement, and other nontypical chemical structures. Third, progress in computational chemistry has yielded new insights that allow a move beyond simple schematics, leading to a molecular model of these complex interfaces. In combination with surface-sensitive measurements, we have gained knowledge of the interfacial structure and dynamics, including the underlying solid surface and the immediately adjacent water and aqueous ions, enabling a better definition of what constitutes the oxide- and silicate-water interfaces. This critical review discusses how science progresses from understanding ideal solid-water interfaces to more realistic systems, focusing on accomplishments in the last 20 years and identifying challenges and future opportunities for the community to address. We anticipate that the next 20 years will focus on understanding and predicting dynamic transient and reactive structures over greater spatial and temporal ranges as well as systems of greater structural and chemical complexity. Closer collaborations of theoretical and experimental experts across disciplines will continue to be critical to achieving this great aspiration. © 2023 American Chemical Society. All rights reserved.

The number of active sites and their intrinsic activity are key factors in designing high-performance catalysts for the oxygen evolution reaction (OER). The synthesis, properties, and in-depth characterization of a homogeneous CoNiFeCu catalyst are reported, demonstrating that multimetal synergistic effects improve the OER kinetics and the intrinsic activity. In situ carbon corrosion and Cu leaching during the OER lead to an enhanced electrochemically active surface area, providing favorable conditions for improved electronic interaction between the constituent metals. After activation, the catalyst exhibits excellent activity with a low overpotential of 291.5 ± 0.5 mV at 10 mA cm−2 and a Tafel slope of 43.9 mV dec−1. It shows superior stability compared to RuO2 in 1 m KOH, which is even preserved for 120 h at 500 mA cm−2 in 7 m KOH at 50 °C. Single particles of this CoNiFeCu after their placement on nanoelectrodes combined with identical location transmission electron microscopy before and after applying cyclic voltammetry are investigated. The improved catalytic performance is due to surface carbon corrosion and Cu leaching. The proposed catalyst design strategy combined with the unique single-nanoparticle technique contributes to the development and characterization of high-performance catalysts for electrochemical energy conversion. © 2022 The Authors. Advanced Materials published by Wiley-VCH GmbH

Grazing incidence X-ray diffraction (GIXRD) and scanning transmission electron microscopy (STEM) combined with energy dispersive X-ray spectroscopy (EDS) were employed to study the microstructure evolution and stress development in the nanocrystalline Cu100−X-ZrX (2.5 at% ≤ x ≤ 5.5 at%) alloy thin films. Small Zr additions to Cu led to significant lattice parameter anisotropy in the as-deposited Cu-Zr thin films both due to macroscopic lattice strain and stacking faults in the Cu matrix. Strain free lattice parameters obtained after the XRD stress analysis of Cu-Zr thin films confirmed formation of a supersaturated substitutional Cu-Zr solid solution. For the first time, the study of film microstructure by XRD line profile analysis (XLPA) confirmed progressive generation of dislocations and planar faults with increasing Zr composition in Cu-Zr alloy films. These microstructural changes led to the generation of tensile stresses in the thin films along with considerable stress gradients across the films thicknesses which are quantified by the traditional dψhkl−Sin2ψ and GIXRD stress measurement methods. The origin of tensile stresses and stress gradients in the Cu-Zr film are discussed on the basis of film growth and heterogeneous microstructure with changing Zr composition. © 2021

Abstract: Combining thin film deposition with in situ heating electron microscopy allows to understand the thermal stability of complex solid solution nanomaterials. From a CrMnFeCoNi alloy target a thin film with an average thickness of ~10 nm was directly sputtered onto a heating chip for in situ transmission electron microscopy. We investigate the growth process and the thermal stability of the alloy and compare our results with other investigations on bulk alloys or bulk-like films thicker than 100 nm. For the chosen sputtering condition and SiNx substrate, the sputter process leads to the Stranski–Krastanov growth type (i.e., islands forming on the top of a continuous layer). Directly after sputtering, we detect two different phases, namely CoNi-rich nanoscale islands and a continuous CrMnFe-rich layer. In situ annealing of the thin film up to 700°C leads to Ostwald ripening of the islands, which is enhanced in the areas irradiated by the electron beam during heating. Besides Ostwald ripening, the chemical composition of the continuous layer and the islands changed during the heating process. After annealing, the islands are still CoNi-rich, but lower amounts of Fe and Cr are observed and Mn was completely absent. The continuous layer also changed its composition. Co and Ni were removed, and the amount of Cr lowered. These results confirm that the synthesis of a CrMnFeCoNi thin film with an average thickness of ~10 nm can lead to a different morphology, chemical composition, and stability compared to thicker films (>100 nm). Impact statement: Exploring stability of a complex solid solution thin film by in situ heating transmission electron microscopy is a study of the thermal stability of sputtered complex solid solution thin films with thicknesses of ~10 nm. Complex solid solution materials have a promising electrocatalytic behavior due to the interplay of multi-element active sites. In order to understand their catalytic properties, it is important to identify the different structure-composition-activity correlations. Thus, our investigation helps to clarify and to understand the stability of nanoscale complex solid solution with an average film thickness of ~10 nm. Graphic abstract: Combining sputter deposition with in situ heating transmission electron microscopy allows to understand the thermal stability of nanoscale complex solid solution thin films. [Figure not available: see fulltext.] © 2022, The Author(s).

During reactive layer growth in binary diffusion couples new phases can nucleate and grow. In the present work we perform in- and ex-situ interdiffusion studies in the system Ni-Al using X-ray diffraction (XRD) and analytical transmission electron microscopy (TEM). We investigate the reaction between 270 °C and 500 °C. We show that in the early stages of the solid-state reaction a small polycrystalline aluminide layer forms, while preferential grain growth follows in the later stage. In the reaction layer we detect the presence of Al3Ni by XRD and electron diffraction. Local chemical analysis by EDX in the TEM suggests that a second aluminide phase forms simultaneously. An in-situ TEM study at 380 °C shows layer growth of about 0.042 nm/s with a linear time dependence. We interpret this rate law on the basis of an interface-controlled reaction and discuss our results in the light of what is known about layer growth in thin film diffusion couples (presence/absence of predicted phases, linear/parabolic rate laws) and in view of results from the Ni-Al system published in the literature. Areas in need of further work are identified. © 2022 The Authors

Grain boundaries are intrinsic and omnipresent microstructural imperfections in polycrystalline and nanocrystalline materials. They are short-circuit diffusion paths and preferential locations for alloying elements, dopants, and impurities segregation. They also facilitate heterogeneous nucleation and the growth of secondary phases. Therefore, grain boundaries strongly influence many materials' properties and their stabilities during application. Here, we propose an approach to measure diffusion, segregation, and segregation-induced precipitation at grain boundaries at a sub-nanometer scale by combining atom probe tomography and scanning transmission electron microscopy. Nanocrystalline multilayer thin films with columnar grain structure were used as a model system as they offer a large area of random high-angle grain boundaries and inherent short diffusion distance. Our results show that the fast diffusion flux proceeds primarily through the core region of the grain boundary, which is around 1 nm. While the spatial range that the segregated solute atoms occupied is larger: below the saturation level, it is 1,2 nm; as the segregation saturates, it is 2–3.4 nm in most grain boundary areas. Above 3.4 nm, secondary phase nuclei seem to form. The observed distributions of the solutes at the matrix grain boundaries evidence that even at a single grain boundary, different regions accommodate different amounts of solute atoms and promote secondary phase nuclei with different compositions, which is caused by its complex three-dimensional topology. © 2021 Acta Materialia Inc.

Tungsten-tungsten carbide (W/W2C) composites are considered as possible structural materials for future nuclear fusion reactors. Here, we report on the effect of helium (He) implantation on microstructure evolution of polycrystalline W/W2C composite consolidated by field-assisted sintering technique (FAST), homogenously implanted at room temperature with 1 MeV 4He+ ions at the fluence of 8 × 1016 ions cm−2 and annealed at 1873 K for 20 minutes. Samples were analysed by scanning and transmission electron microscopy to study the presence and size of He bubbles. Monomodal He bubbles in W (30-80 nm) are limited to point defects and grain boundaries, with a considerable void denuded zone (150 nm). Bubbles do not form in W2C, but at the W|W2C interface and are considerably larger (200-400 nm). The experimental observations on He behaviour and migration in W and W2C were assessed by density functional theory (DFT) calculations, suggesting He migration and accumulation in the composite are determined by the effective He-He binding in clusters, which will give rise to decohesion. In the presence of He clusters, the decohesion of bulk W into free surfaces is energetically highly favourable but not sufficient in the W2C; hence bubbles are only observed in W grains and interfaces and not within bulk W2C. © 2022

Since its discovery in 1954, the omega (ω) phase in titanium and its alloys has attracted substantial attention from researchers. The β-to-ω and ω-to-α phase transformations are central to β-titanium alloy design, but the transformation mechanisms have been a subject of debate. With new generations of aberration-corrected transmission electron microscopy and atom probe tomography, both the spatial resolution and compositional sensitivity of phase transformation analysis have been rapidly improving. This review provides a detailed assessment of the new understanding gained and related debates in this field enabled by advanced characterization methods. Specifically, new insights into the possibility of a coupled diffusional-displacive component in the β-to-ω transformation and key nucleation driving forces for the ω-assisted α phase formation are discussed. Additionally, the influence of ω phase on the mechanical properties of β-titanium alloys is also reviewed. Finally, a perspective on open questions and future direction for research is discussed. © This material is authored by Battelle Memorial Institute with the US Department of Energy under Contract No. DE-AC05-76RL01830. The US Government retains for itself, and others acting on its behalf, a paid-up, non-exclusive, and irrevocable worldwide license in said article to reproduce, prepare derivative works, distribute copies to the public, and perform publicly and display publicly, by or on behalf of the Government.

While age-hardened austenitic high-Mn and high-Al lightweight steels exhibit excellent strength-ductility combinations, their properties are strongly degraded when mechanically loaded under harsh environments, e.g. with the presence of hydrogen (H). The H embrittlement in this type of materials, especially pertaining to the effect of κ-carbide precipitation, has been scarcely studied. Here we focus on this subject, using a Fe-28.4Mn-8.3Al-1.3C (wt%) steel in different microstructure conditions, namely, solute solution treated and age-hardened. Contrary to the reports that grain boundary (GB) κ-carbides precipitate only during overaging, site-specific atom probe tomography and scanning transmission electron microscopy (STEM) reveal the existence of nanosized GB κ-carbides at early stages of aging. We correlate this observation with the deterioration of H embrittlement resistance in aged samples. While H pre-charged solution-treated samples fail by intergranular fracture at depths consistent with the H ingress depth (∼20 µm), age-hardened samples show intergranular fracture features at a much larger depth of above 500 µm, despite similar amount of H introduced into the material. This difference is explained in terms of the facile H-induced decohesion of GB κ-carbides/matrix interfaces where H can be continuously supplied through internal short-distance diffusion to the propagating crack tips. The H-associated decohesion mechanisms are supported by a comparison with the fracture behavior in samples loaded under the cryogenic temperature and can be explained based on dislocation pileups and elastic misfit at the GB κ-carbide/matrix interfaces. The roles of other plasticity-associated H embrittlement mechanisms are also discussed in this work based on careful investigations of the dislocation activities near the H-induced cracks. Possible alloying and microstructure design strategies for the enhancement of the H embrittlement resistance in this alloy family are also suggested. © 2022

Physical properties of ten single-phase FCC CrxMn20Fe20Co20Ni40-x high-entropy alloys (HEAs) were investigated for 0 ≤ x ≤ 26 at%. The lattice parameters of these alloys were nearly independent of composition while solidus temperatures increased linearly by ∼30 K as x increased from 0 to 26 at.%. For x ≥ 10 at.%, the alloys are not ferromagnetic between 100 and 673 K and the temperature dependencies of their coefficients of thermal expansion and elastic moduli are independent of composition. Magnetic transitions and associated magnetostriction were detected below ∼200 K and ∼440 K in Cr5Mn20Fe20Co20Ni35 and Mn20Fe20Co20Ni40, respectively. These composition and temperature dependencies could be qualitatively reproduced by ab initio simulations that took into account a ferrimagnetic ↔ paramagnetic transition. Transmission electron microscopy revealed that plastic deformation occurs initially by the glide of perfect dislocations dissociated into Shockley partials on {111} planes. From their separations, the stacking fault energy (SFE) was determined, which decreases linearly from 69 to 23 mJ·m−2 as x increases from 14 to 26 at.%. Ab initio simulations were performed to calculate stable and unstable SFEs and estimate the partial separation distances using the Peierls-Nabarro model. While the compositional trends were reasonably well reproduced, the calculated intrinsic SFEs were systematically lower than the experimental ones. Our ab initio simulations show that, individually, atomic relaxations, finite temperatures, and magnetism strongly increase the intrinsic SFE. If these factors can be simultaneously included in future computations, calculated SFEs will likely better match experimentally determined SFEs. © 2022

Cementite (Fe3C) plays a major role in the tribological performance of rail and bearing steels. Nonetheless, the current understanding of its deformation behavior during wear is limited because it is conventionally embedded in a matrix. Here, we investigate the deformation and chemical evolution of bulk polycrystalline cementite during single-pass sliding at a contact pressure of 31 GPa and reciprocating multi-pass sliding at 3.3 GPa. The deformation behavior of cementite was studied by electron backscatter diffraction for slip trace analysis and transmission electron microscopy. Our results demonstrate activation of several deformation mechanisms below the contact surface: dislocation slip, shear band formation, fragmentation, grain boundary sliding, and grain rotation. During sliding wear, cementite ductility is enhanced due to the confined volume, shear/compression domination, and potentially frictional heating. The microstructural alterations during multi-pass wear increase the subsurface nanoindentation hardness by up to 2.7 GPa. In addition, we report Hägg carbide (Fe5C2) formation in the uppermost deformed regions after both sliding experiments. Based on the results of electron and X-ray diffraction, as well as atom probe tomography, we propose potential sources of excess carbon and mechanisms that promote the phase transformation. © 2022 The Author(s)

Although titanium nitride (TiN) is among the most extensively studied and thoroughly characterized thin-film ceramic materials, detailed knowledge of relevant dislocation core structures is lacking. By high-resolution scanning transmission electron microscopy (STEM) of epitaxial single crystal (001)-oriented TiN films, we identify different dislocation types and their core structures. These include, besides the expected primary a/2{110}〈11–0〉 dislocation, Shockley partial dislocations a/6{111}〈112–〉 and sessile Lomer edge dislocations a/2{100}〈011〉. Density-functional theory and classical interatomic potential simulations complement STEM observations by recovering the atomic structure of the different dislocation types, estimating Peierls stresses, and providing insights on the chemical bonding nature at the core. The generated models of the dislocation cores suggest locally enhanced metal–metal bonding, weakened Ti-N bonds, and N vacancy-pinning that effectively reduces the mobilities of {110}〈11–0〉 and {111}〈112–〉 dislocations. Our findings underscore that the presence of different dislocation types and their effects on chemical bonding should be considered in the design and interpretations of nanoscale and macroscopic properties of TiN. © 2022 The Authors

We report the cyclic deformation behavior of CoCrNi at 550 °C under a strain amplitude of ± 0.5% and compare it to that of CoCrFeMnNi. CoCrNi manifests cyclic hardening followed by minor softening and a near-steady state until failure. Transmission electron microscopy investigations of CoCrNi revealed that increasing the number of cycles from 10 to 2500/5000 leads to a transition of dislocation arrangements from slip bands to tangles. Compared to CoCrFeMnNi, CoCrNi exhibits higher strength, longer lifetime and persistent serrated flow. Owing to its lower stacking fault energy (even at 550 °C), planar slip is more pronounced in CoCrNi than CoCrFeMnNi, which additionally shows wavy slip. © 2022 Acta Materialia Inc.

We investigated the effects of interstitial N and C on the stacking fault energy (SFE) of an equiatomic CoCrNi medium entropy alloy. Results of computer modeling were compared to tensile deformation and electron microscopy data. Both N and C in solid solution increase the SFE of the face-centered cubic (FCC) alloy matrix at room temperature, with the former having a more significant effect by 240% for 0.5 at % N. Total energy calculations based on density functional theory (DFT) as well as thermodynamic modeling of the Gibbs free energy with the CALPHAD (CALculation of PHAse Diagrams) method reveal a stabilizing effect of N and C interstitials on the FCC lattice with respect to the hexagonal close-packed (HCP) CoCrNi-X (X: N, C) lattice. Scanning transmission electron microscopy (STEM) measurements of the width of dissociated ½<110> dislocations suggest that the SFE of CoCrNi increases from 22 to 42–44 mJ·m−2 after doping the alloy with 0.5 at. % interstitial N. The higher SFE reduces the nucleation rates of twins, leading to an increase in the critical stress required to trigger deformation twinning, an effect which can be used to design load-dependent strain hardening response. © 2022 The Author(s). Published by National Institute for Materials Science in partnership with Taylor & Francis Group.

The enormous magnitude of 2 billion tons of alloys produced per year demands a change in design philosophy to make materials environmentally, economically, and socially more sustainable. This disqualifies the use of critical elements that are rare or have questionable origin. Amongst the major alloy strengthening mechanisms, a high-dispersion of second-phase precipitates with sizes in the nanometre range is particularly effective for achieving ultra-high strength. Here, we propose an alternative segregation-based strategy for sustainable steels, free of critical elements, which are rendered ultrastrong by second-phase nano-precipitation. We increase the Mn-content in a supersaturated, metastable Fe-Mn solid solution to trigger compositional fluctuations and nano-segregation in the bulk. These fluctuations act as precursors for the nucleation of an unexpected α-Mn phase, which impedes dislocation motion, thus enabling precipitation strengthening. Our steel outperforms most common commercial alloys, yet it is free of critical elements, making it a new platform for sustainable alloy design. © 2022, The Author(s).

CO2 methanation using nickel-based catalysts has attracted large interest as a promising power-to-gas route. Ni nanoparticles supported on nitrogen-doped CNTs with Ni loadings in the range from 10 wt% to 50 wt% were synthesized by impregnation, calcination and reduction and characterized by elemental analysis, X-ray powder diffraction, H2 temperature-programmed reduction, CO pulse chemisorption and transmission electron microscopy. The Ni/NCNT catalysts were highly active in CO2 methanation at atmospheric pressure, reaching over 50% CO2 conversion and over 95% CH4 selectivity at 340 °C and a GHSV of 50,000 mL g−1 h−1 under kinetically controlled conditions. The small Ni particle sizes below 10 nm despite the high Ni loading is ascribed to the efficient anchoring on the N-doped CNTs. The optimum loading of 30 wt%–40 wt% Ni was found to result in the highest Ni surface area, the highest degree of conversion and the highest selectivity to methane. A constant TOF of 0.3 s−1 was obtained indicating similar catalytic properties of the Ni nanoparticles in the range from 10 wt% to 50 wt% Ni loading. Long-term experiments showed that the Ni/NCNT catalyst with 30 wt% Ni was highly stable for 100 h time on stream. © 2020 Science Press

In this study, we report on face-centered cubic structured CoCrFeNi high-entropy alloy thin films with finely dispersed nano-oxide particles which are formed by internal oxidation. Analytical scanning transmission electron microscopy imaging found that the particles are Cr2O3. The oxide particles contribute to the hardening of the film increasing its hardness by 14% compared to that of the film without precipitates, through the Orowan-type strengthening mechanism. Our novel approach paves the way to design medium- and high-entropy alloys with high strength by making use of oxide phases. © 2021

The unique structural and electronic properties of transition metal dichalcogenides (TMDs) and in particular tungsten disulphide (WS2) make them interesting for a variety of applications such as the electrocatalytic hydrogen evolution reaction (HER) for water splitting devices and chemiresistive gas sensors. The key parameter for the realisation of these devices is the controlled large-area growth of WS2 combined with tuning the surface morphology and electronic properties which is achieved by bottom-up fabrication methods such as chemical vapour deposition (CVD). In this study, 2H-WS2 films are fabricated by a new metal-organic CVD (MOCVD) process resulting in the growth of crystalline, pure, and stoichiometric films which was accomplished at temperatures as low as 600 °C as confirmed by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Rutherford backscattering spectrometry (RBS)/nuclear reaction analysis (NRA), and Raman spectroscopy. The surface morphology of WS2 layers was investigated by scanning electron microscopy (SEM) and high-resolution transmission electron microscopy (HR-TEM). Following successful process development, the WS2 layers were deposited on conducting FTO/glass substrates and their catalytic activity for the HER was evaluated in a linear sweep voltammetry (LSV) experiment. Furthermore, the temperature-dependent sensor response towards NO2, CO, and NH3 was investigated for WS2 films deposited on special sensor chips, revealing a p-type response towards NO2 and NH3 and sensitivities of around 20% for NO2 and NH3 concentrations of 1.5 ppm and 7.6 ppm, respectively. These promising results demonstrate the effectiveness of scalable CVD-grown WS2 and pave the way for practical applications by modulating the properties of materials to achieve enhanced electrocatalytic and sensing performances employing WS2 layers. © 2021 The Royal Society of Chemistry.

The formation of nanoparticles by sputtering on ionic liquids could occur at the surface or in the volume of the liquid. To clarify which process occurs, Cu was sputtered in inert and oxidative plasma onto two different ionic liquids. 1-Butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide [Bmim][(Tf)2N] and 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide [Emim][(Tf)2N] were selected for their low solubility of oxygen and their different surface tensions to differentiate the influence of the ionic liquid characteristics on the formation process and characteristics of nanoparticles. The chemical state of nanoparticles in the ionic liquids, metallic or oxidized, was analyzed by X-ray photoelectron spectroscopy. Transmission electron microscopy was performed to acquire nanoparticle size distributions and shapes. The results indicate that nanoparticle formation occurs within the ionic liquid volume, contradicting the prevailing assumption that nanoparticle formation begins at the ionic liquid surface. Nanoparticle size distributions indicate that a higher viscosity of the ionic liquid results in higher nanoparticle diameters. © 2021 The Authors. Published by American Chemical Society.

Using both novel high-throughput screening via combinatorial thin film deposition and conventional bulk alloy synthesis techniques, a large region of the AlCrFeNiTi composition space has been probed for alloys that could serve as low cost alternatives to nickel-base superalloys for medium-to-high temperature structural applications. Phase formation trends in this highly complex alloying system have been determined using characterisation techniques that span multiple length scales—from bulk X-ray diffraction and differential scanning calorimetry to atomically resolved scanning transmission electron microscopy and energy dispersive X-ray spectroscopy. A large region of stability for both disordered A2 and ordered B2/L21 type phases is observed, with several compositions exhibiting fine-scaled precipitation structures of these two phases. For alloys with ≥20 at.% Al, the precipitation structure was further refined to a nano-scale lamellar arrangement of A2 and B2/L21 phases. Formation of C14 Laves phase, especially for compositions with >10 at.% Ti, has consistently been observed. We include a screening of the mechanical properties based on nanoindentation and macroscopic hardness test data correlated with scanning electron microscope (SEM) observations of the hardness indents. The phase formation trends observed by both combinatorial thin film deposition and bulk alloy synthesis are discussed in detail for samples in the as-deposited and as-cast conditions, respectively. © 2020 Elsevier Ltd

A series of Co1+xFe2–xO4 (0≤x≤2) spinel nanowires was synthesized by nanocasting using SBA-15 silica as hard template, which was characterized by X-ray powder diffraction, X-ray photoelectron spectroscopy, and transmission electron microscopy. The Co1+xFe2–xO4 spinels were applied in the aerobic oxidation of aqueous 2-propanol solutions to systematically study the influence of exposed Co and Fe cations on the catalytic properties. The activity of the catalysts was found to depend strongly on the Co content, showing an exponential increase of the reaction rate with increasing Co content. Ensembles of Co3+cus (coordinatively unsaturated) sites were identified as the active sites for selective 2-propanol oxidation, which are assumed to consist of more than six Co ions. In addition, gas-phase oxidation with and without water vapor co-feeding was performed to achieve a comparison with liquid-phase oxidation kinetics. An apparent activation energy of 94 kJ mol−1 was determined for 2-propanol oxidation over Co3O4 in the liquid phase, which is in good agreement with the gas-phase oxidation in the presence of water vapor. In contrast to gas-phase conditions, the catalysts showed high stability and reusability in the aqueous phase with constant conversion in three consecutive runs. © 2021 The Authors. ChemCatChem published by Wiley-VCH GmbH

Tempered martensite ferritic steels (TMFSs) have been and are being used for critical components in high temperature plant operating in the 600 °C range. They are exposed to creep conditions for long time periods, exceeding 100,000 h. In the present study we investigate a 12% Cr TMFS, after creep-testing at 550 °C at 120 MPa for 139,000 h. We had previously investigated this material in the TEM using thin foils. We now use an extraction replica technique to analyze four particle families: M23C6, MX, Laves-phase and Z-phase, considering statistically relevant numbers of particles (between 120 and 720). We show how EELS mapping can help in identifying Z-phase particles and use Cr-V-maps to differentiate between the four particle families. The chemical evolution of particles is investigated. The experimental results are discussed in the light of previous thin foil data and with respect to predictions from computational thermodynamics. The strength and weakness of thin foil and replica procedures are compared. Improvements for thermodynamic databases are suggested. © 2021

Dislocations play an important role in thermal transport by scattering phonons. Nevertheless, for materials with intrinsically low thermal conductivity, such as thermoelectrics, classical models require exceedingly high numbers of dislocations (>1012 cm–2) to further impede thermal transport. In this work, a significant reduction in thermal conductivity of Na0.025Eu0.03Pb0.945Te is demonstrated at a moderate dislocation density of 1 × 1010 cm–2. Further characteristics of dislocations, including their arrangement, orientation, and local chemistry are shown to be crucial to their phonon-scattering effect and are characterized by correlative microscopy techniques. Electron channeling contrast imaging reveals a uniform distribution of dislocations within individual grains, with parallel lines along four <111> directions. Transmission electron microscopy (TEM) shows the parallel networks are edge-type and share the same Burgers vectors within each group. Atom probe tomography reveals the enrichment of dopant Na at dislocation cores, forming Cottrell atmospheres. The dislocation network is demonstrated to be stable during in situ heating in the TEM. Using the Callaway transport model, it is demonstrated that both parallel arrangement of dislocations and Cottrell atmospheres make dislocations more efficient in phonon scattering. These two mechanisms provide new avenues to lower the thermal conductivity in materials for thermal-insulating applications. © 2021 The Authors. Advanced Functional Materials published by Wiley-VCH GmbH

Metastable Cr0.8Cu0.2 alloy thin films with nominal thickness of 360 nm have been deposited on Si(100) substrate by co-evaporation of Cu and Cr using molecular beam epitaxy (MBE). Phase evolution, microstructure, stress development, and crystallographic texture in Cr0.8Cu0.2 thin films have been investigated by X-ray diffraction (XRD), atom probe tomography (APT) and transmission electron microscopy (TEM) combined with energy dispersive X-ray spectroscopy (EDS) during annealing of the films in the temperature range 200–450 °C. X-ray diffraction of the as-deposited thin film shows single phase bcc crystal structure of the film whereas APT observation of fine precipitates in the film matrix due to inherent compositional fluctuation indicates onset of phase separation via spinodal decomposition regime. XRD (in-situ) and APT investigation of 300 °C annealed film reveals that the early stage of phase separation involves localized formation of metastable intermediate bcc precipitate phase having 60 at% Cr and 40 at% Cu approximately (~Cr0.6Cu0.4). For longer duration of annealing at temperature ≥350 °C, such metastable bcc precipitates act as heterogeneous nucleation sites for the onset of precipitation of Cu rich fcc Cu(Cr) phase which indicates a change of phase separation mechanism from ‘spinodal decomposition’ to ‘nucleation and growth’. Annealing of the film at temperature ≥400 °C for longer duration leads to the formation of a two phase structure with Cu rich fcc precipitate phase in a Cr rich bcc matrix. Observed phase decomposition is accompanied by significant changes in the microstructure, residual stress and crystallographic texture in the Cr rich bcc film matrix which leads to the minimization of both surface and strain energies and thereby a reduction of total Gibbs free energy of the thin film. Thermodynamic model calculation has been presented in order to understand the nucleation pathway of Cu rich stable fcc Cu(Cr) precipitates via non-classical nucleation of metastable intermediate bcc Cr0.6Cu0.4 phase. © 2021 Elsevier B.V.

A systematic study of the compression creep properties of a single-crystalline Co-base superalloy (Co-9Al-7.5W-2Ta) was conducted at 950, 975 and 1000°C to reveal the influence of temperature and the resulting diffusion velocity of solutes like Al, W and Ta on the deformation mechanisms. Two creep rate minima are observed at all temperatures indicating that the deformation mechanisms causing these minima are quite similar. Atom-probe tomography analysis reveals elemental segregation to stacking faults, which had formed in the γ′ phase during creep. Density-functional-theory calculations indicate segregation of W and Ta to the stacking fault and an associated considerable reduction of the stacking fault energy. Since solutes diffuse faster at a higher temperature, segregation can take place more quickly. This results in a significantly faster softening of the alloy, since cutting of the γ′ precipitate phase by partial dislocations is facilitated through segregation already during the early stages of creep. This is confirmed by transmission electron microscopy analysis. Therefore, not only the smaller precipitate fraction at higher temperatures is responsible for the worse creep properties, but also faster diffusion-assisted shearing of the γ′ phase by partial dislocations. The understanding of these mechanisms will help in future alloy development by offering new design criteria. © 2021

An equiatomic CrFeNi medium-entropy alloy (MEA) that constitutes a cornerstone of austenitic stainless steels and Fe-based superalloys is investigated. Anneals at various temperatures revealed that CrFeNi forms a stable face-centered cubic (FCC) solid solution above ~1223 K. Based on this result, this alloy was cold-worked and recrystallized between 1273 K and 1473 K to produce different grain sizes. Compression tests were carried out at 293 K to investigate grain boundary strengthening (Hall-Petch slope: 966 MPa µm1/2) and this contribution was then subtracted from the overall strength to reveal the intrinsic uniaxial lattice strength (80 MPa). Additional compression and tensile tests were performed between 77 K and 873 K to study the effect of temperature on mechanical properties and deformation mechanisms. Ductility, yield and ultimate tensile strengths increased with decreasing temperature. To reveal the active deformation mechanisms in CrFeNi with the coarsest grain size (160 µm), tensile tests at 77 K and 293 K were interrupted at different strains followed by transmission electron microscopy analyses. In all cases, the deformation was accommodated by dislocation glide at low strains, while twinning additionally occurred above a critical resolved shear stress of 165 MPa, which was roughly temperature independent. This value compares well with predictions (180 MPa) based on the Kibey's model for twin nucleation. Moreover, the fact that this value is roughly temperature-independent is also consistent with the Kibey's model since the twin nucleation barrier (unstable twin stacking fault energy) of FCC metals and alloys does not vary significantly with temperature. © 2020 Acta Materialia Inc.

Reduced activation ferritic/martensitic (RAFM) steels are among the most competitive candidates of structural materials for nuclear fusion reactors, due to their superior comprehensive properties. Friction stir welding (FSW) was investigated in joining RAFM steel, considering its potential advantages in obtaining an optimal microstructure and mechanical properties of welded joint. To evaluate the feasibility of FSW in joining RAFM steel, an in-depth understanding of the microstructure-property relationships for friction stir welded joints of RAFM steel is necessary. In this research, the quantitative relationships between microstructural evolution and tensile properties in the stir zone (SZ) of friction stir welded RAFM steel after post-weld tempering treatment (PWTT) were systematically studied. Three different post-weld tempering temperatures namely 720 °C, 760 °C, and 800 °C were adopted. Then the uniaxial tensile properties were tested at room temperature and 550 °C, respectively. Electron backscatter diffraction (EBSD), transmission electron microscopy (TEM), and the Thermo-Calc Calphad software were adopted to systematically investigate the microstructural evolution. Martensite lath width, precipitate number density, equilibrium solid solubility of alloying elements in the matrix, and geometrically necessary dislocation (GND) density were analyzed quantitatively. With the results obtained, we assessed the contribution of each strengthening mechanism to the 0.2% offset yield strength. According to the effective inter-barrier spacing theory, a microstructure-sensitive yield strength model was obtained to well predict the change in yield strength at different conditions. Finally, the results calculated by equivalent strengthening effect indicated that the crucial microstructure determining the yield strength of the SZ for RAFM steel after PWTT is the high density of dislocation substructures. © 2021 Elsevier B.V.

Enamel and dentin are susceptible to acids from food sources leading to dental erosion, a global problem affecting millions of individuals. Particulate hydroxyapatite (HAP) on the tooth surface can influence the effects of acid attacks. Standardized bovine enamel and dentin samples with artificial saliva are used in an in vitro cyclic demineralization-remineralization protocol to analyze the structural changes experienced by tooth surfaces using high-resolution scanning electron microscopy and to evaluate the potential of a HAP-based oral care gel in the protection of teeth from erosive attacks. The interfaces between HAP particle and enamel HAP crystallites are investigated using focused ion beam preparation and transmission electron microscopy. The results show that erosion with phosphoric acid severely affects enamel crystallites and dentin tubules, while artificial saliva leads to remineralization effects. The HAP-gel forms a microscopic layer on both enamel and dentin surfaces. Upon acid exposure, this layer is sacrificed before the native tooth tissues are affected, leading to significantly lower degrees of demineralization compared to the controls. This demonstrates that the use of particulate HAP as a biomaterial in oral care formulations can help protect enamel and dentin surfaces from erosive attacks during meals using a simple and effective protection principle. © 2021 ICE Publishing: All rights reserved.

Co3O4 nanocubes are evaluated concerning their intrinsic electrocatalytic activity towards the oxygen evolution reaction (OER) by means of single-entity electrochemistry. Scanning electrochemical cell microscopy (SECCM) provides data on the electrocatalytic OER activity from several individual measurement areas covering one Co3O4 nanocube of a comparatively high number of individual particles with sufficient statistical reproducibility. Single-particle-on-nanoelectrode measurements of Co3O4 nanocubes provide an accelerated stress test at highly alkaline conditions with current densities of up to 5.5 A cm−2, and allows to derive TOF values of up to 2.8×104 s−1 at 1.92 V vs. RHE for surface Co atoms of a single cubic nanoparticle. Obtaining such high current densities combined with identical-location transmission electron microscopy allows monitoring the formation of an oxy(hydroxide) surface layer during electrocatalysis. Combining two independent single-entity electrochemistry techniques provides the basis for elucidating structure–activity relations of single electrocatalyst nanoparticles with well-defined surface structure. © 2021 The Authors. Angewandte Chemie International Edition published by Wiley-VCH GmbH

The grain boundary (GB) microchemistry and precipitation behaviour in high-strength Al-Zn-Mg-Cu alloys has an important influence on their mechanical and electrochemical properties. Simulation of the GB segregation, precipitation, and solute distribution in these alloys requires an accurate description of the thermodynamics and kinetics of this multi-component system. CALPHAD databases have been successfully developed for equilibrium thermodynamic calculations in complex multi-component systems, and in recent years have been combined with diffusion simulations. In this work, we have directly incorporated a CALPHAD database into a phase-field framework, to simulate, with high fidelity, the complex kinetics of the non-equilibrium GB microstructures that develop in these important commercial alloys during heat treatment. In particular, the influence of GB solute segregation, GB diffusion, precipitate number density, and far-field matrix composition, on the growth of a population of GB η-precipitates, was systematically investigated in a model Al-Zn-Mg-Cu alloy of near AA7050 composition. It is shown that the GB solute distribution in the early stages of ageing was highly heterogeneous and strongly affected by the distribution of GB η-precipitates. Significant Mg and Cu GB segregation was predicted to remain during overageing, while Zn was rapidly depleted. This non-trivial GB segregation behaviour markedly influenced the resulting precipitate morphologies, but the overall precipitate transformation kinetics on a GB were relatively unaffected. Furthermore, solute depletion adjacent to the GB was largely determined by Zn and Mg diffusion, which will affect the development of precipitate free zones during the early stages of ageing. The simulation results were compared with scanning transmission electron microscopy and atom probe tomography characterisation of alloys of the similar composition, with good agreement. © 2021

Abstract: The present work shows that thermal expansion experiments can be used to measure the γʼ-solvus temperatures of four Ni-base single-crystal superalloys (SX), one with Re and three Re-free variants. In the case of CMSX-4, experimental results are in good agreement with numerical thermodynamic results obtained using ThermoCalc. For three experimental Re-free alloys, the experimental and calculated results are close. Transmission electron microscopy shows that the chemical compositions of the γ- and the γʼ-phases can be reasonably well predicted. We also use resonant ultrasound spectroscopy (RUS) to show how elastic coefficients depend on chemical composition and temperature. The results are discussed in the light of previous results reported in the literature. Areas in need of further work are highlighted. Graphical abstract: [Figure not available: see fulltext.] © 2021, The Author(s).

Despite outstanding accomplishments in catalyst discovery, finding new, more efficient, environmentally neutral, and noble metal-free catalysts remains challenging and unsolved. Recently, complex solid solutions consisting of at least five different elements and often named as high-entropy alloys have emerged as a new class of electrocatalysts for a variety of reactions. The multicomponent combinations of elements facilitate tuning of active sites and catalytic properties. Predicting optimal catalyst composition remains difficult, making testing of a very high number of them indispensable. We present the high-throughput screening of the electrochemical activity of thin film material libraries prepared by combinatorial co-sputtering of metals which are commonly used in catalysis (Pd, Cu, Ni) combined with metals which are not commonly used in catalysis (Ti, Hf, Zr). Introducing unusual elements in the search space allows discovery of catalytic activity for hitherto unknown compositions. Material libraries with very similar composition spreads can show different activities vs. composition trends for different reactions. In order to address the inherent challenge of the huge combinatorial material space and the inability to predict active electrocatalyst compositions, we developed a high-throughput process based on co-sputtered material libraries, and performed high-throughput characterization using energy dispersive X-ray spectroscopy (EDS), scanning transmission electron microscopy (SEM), X-ray diffraction (XRD) and conductivity measurements followed by electrochemical screening by means of a scanning droplet cell. The results show surprising material compositions with increased activity for the oxygen reduction reaction and the hydrogen evolution reaction. Such data are important input data for future data-driven materials prediction. [Figure not available: see fulltext.] © 2021, The Author(s).

The aluminum alloy 2618A is applied for engine components such as radial compressor wheels which operate for long time at elevated temperatures. This results in coarsening of the hardening precipitates and degradation in mechanical properties during the long-term operation, which is not taken into account in the current lifetime prediction models due to the lack of quantitative microstructural and mechanical data. To address this issue, a quantitative investigation on the evolution of precipitates during long-term aging at 190 °C for up to 25,000 h was conducted. Detailed transmission electron microscopy (TEM) was combined with Brinell hardness measurements and thorough differential scanning calorimetry (DSC) experiments. The results show that GPB zones and S-phase Al2CuMg grow up to < 1,000 h during which the GPB zones dissolve and S-phase precipitates form. For longer aging times, only S-phase precipitates coarsen, which can be well described using the Lifshitz–Slyozov–Wagner theory of ripening. A thorough understanding of the underlying microstructural processes is a prerequisite to enable the integration of aging behavior into the established lifetime models for components manufactured from alloy 2618A. © 2021, The Author(s).

A dislocation network which formed during selective laser melting (SLM) of a Ni-base superalloy was analyzed using scanning transmission electron microscopy (STEM). This network traverses an ordered Gamma'-phase domain, in between two adjacent Gamma-solid solution regions. The Gamma’-phase region has formed when two Gamma’-phase particles have started to coalesce, trapping the dislocation network in this ordered region so that it formed two dislocation families with pairs of anti-phase boundary (APB) coupled super partial dislocations. The network features are presented and unusual features (twist character and low APB energies), not previously reported, are discussed. © 2020

The role of elemental partitioning between β and ω phase in embrittling an originally ductile ω-containing Ti–12Mo (wt.%) model alloy was studied using transmission electron microscopy and atom probe tomography. It is revealed that the embrittlement of this alloy already occurs after aging at 400 °C for as short as 10 min, when the size, inter-particle spacing and volume fraction of the ω particles remain almost unchanged. The origin of the aging-induced embrittlement is attributed to the significant rejection of Mo (>5 at.%) from the ω particles during aging, which leads to remarkable increase in the shear modulus (>30 GPa) of the ω particles, promoting intense plastic flow localization and facilitating crack nucleation prior to macroscopic yielding. © 2020

Co3O4 nanospheres with a mean diameter of 19 nm were applied in the selective oxidation of 2-propanol to acetone in the gas phase. Compared with 9 nm spheres, the 19 nm spheres exhibited superior catalytic activity and stability with 100% selectivity to acetone up to 500 K. Transmission electron microscopy, N2 physisorption, 2-propanol and O2 temperature-programmed desorption, and 2-propanol temperature-programmed surface reaction in O2 were applied to characterize the bulk and surface properties. Despite the smaller specific surface area (35 m2 g-1), an increased 2-propanol adsorption capacity was observed for the larger nanospheres ascribed to a preferential (110) surface orientation. Temperature-programmed oxidation experiments after reaction showed multilayer coke deposition and severe reduction of the Co3O4 surface, but excellent stability was maintained at 430 K using the 19 nm spheres in a steady-state oxidation experiment for 100 h with only 10% loss of the initial activity. The good agreement of the 2-propanol decomposition profiles indicates that the superior activity is caused by the enhanced interaction of the larger nanospheres with O2. A Mars-van Krevelen mechanism on the (110) surface was identified by density functional theory calculations with a Hubbard U term, favoring faster reoxidation compared with the (100) surface predominantly exposed by the 9 nm spheres. © The Royal Society of Chemistry.

Experimentally revealing the nanometric deformation behavior of 3C-SiC is challenging due to its ultra-small feature size for brittle-to-ductile transition. In the present work, we elucidated the nanometric cutting mechanisms of 3C-SiC by performing in situ nanometric cutting experiments under scanning electron microscope (SEM), as well as post-characterization by electron back-scattered diffraction (EBSD) and transmission electron microscopy (TEM). In particular, a new method based on the combination of image processing technology and SEM online observation was proposed to achieve in situ measurement of cutting force with an uncertainty less than 1 mN. Furthermore, the cutting cross-section was characterized by atomic force microscope (AFM) to access the specific cutting energy. The results revealed that the specific cutting energy increase non-linearly with the decrease of cutting depth due to the size effect of cutting tool in nanometric cutting. The high-pressure phase transformation (HPPT) may play the major role in 3C-SiC ductile machining under the parameters of this experiment. © 2021, The Author(s), under exclusive licence to Springer-Verlag London Ltd., part of Springer Nature.

We have investigated the partitioning of solutes at crystal defects in intergranular Cr-rich M2B borides after creep at 850°C/185MPa and annealing at 850°C for approximately 3000 h in a polycrystalline nickel-based superalloy. Borides were found to coarsen in both cases, with the borides after creep being the thickest (800–1100 nm), compared to borides annealed in the absence of an external applied load (400–600 nm). Transmission electron microscopy revealed that the coarsened borides have either a tetragonal I4/mcm structure, or an orthorhombic Fddd, with those two structures coexisting in a single particle. The presence of a very high density of planar faults was systematically observed within the coarsened borides. The faults were correlated with chemical fluctuations of B and Cr, revealed by atom probe tomography. In addition, partitioning of Ni and Co was observed at dislocations within the borides after creep, providing insights into the deformation of borides. © 2021, The Minerals, Metals & Materials Society.

Cu–Cr/55 vol% diamond composites with 1 wt % (Cu–1Cr/55Dia), 2 wt % (Cu–2Cr/55Dia), and 3 wt % (Cu–3Cr/55Dia) Cr additives, respectively, are fabricated by a hot forging method. The diamond particle surfaces are nearly completely covered by the formed carbides interface for the Cu–3Cr/55Dia composite, and the Cu–3Cr/55Dia has the highest measured thermal conductivity among the three fabricated composites (433 Wm−1K−1). High Resolution Transmission Electron Microscopy analyses suggest that a double-layered interface structure is formed between the copper matrix and the diamond particle in the Cu–3Cr/55Dia, which is composed of 160 nm-thick Cr3C2 and 2 nm-thick Cr23C6. This interface structure, together with high relative density of the composite, high interface coverage of diamond, thin interface layer, and formation of coherent atomic boundaries, significantly contributes to obtaining high thermal conductivity for the Cu–3Cr/55Dia composite. The Diffuse Mismatch Model and Differential Effective Medium model are modified for establishing the quantitative relationship among interface characteristics, interface thermal conductance, and the composite's thermal conductivity, based on considering the composite's interface structure and phonon transmission theory. The predicted thermal conductivity value is well matched with the measured value for the Cu–3Cr/diamond (487 Wm−1K−1 vs 433 Wm−1K−1). This helps understand heat transfer behavior in the Cu–Cr/diamond composites. © 2020 Elsevier Ltd

SmFe11Ti-based alloys have potential as permanent magnet materials; however, until now, crystallographically textured bulk permanent magnets have not yet been produced from this alloy system. This is partly due to the lack of information on the morphology and composition of grain boundary phases present in the Fe-rich Sm-Fe-Ti alloys. Here we investigated the microstructure of a Sm1.25Fe11Ti alloy by using correlative transmission electron microscopy and atom-probe tomography, combined with magneto-optical Kerr effect (MOKE) probing to relate the material's micro- and nanostructure to its properties. The grains of the Sm(Fe,Ti)12 matrix phase are separated by grain boundaries exhibiting a different composition over 3-4 nm width. They contain >75at% of the ferromagnetic element Fe, with an enrichment of Sm of up to 16.6 at% and a depletion in Ti, down to approx. 3.4 at%. We believe that the grain boundary is ferromagnetic at room temperature, which makes the magnetic decoupling of the grains practically impossible, which, in turn, leads to a low coercivity of SmFe11Ti-based alloys. MOKE measurements reveal the strong ferromagnetic coupling across the grain boundary, causing the nucleation of reversal magnetic domains when exposed to low magnetic fields. In a triple-junction area we identified three other ferromagnetic phases: Sm3(Fe,Ti)29,SmFe2, and Fe2Ti. These details bring out the scope of further adjustment of the coercivity in the Sm-Fe-Ti alloy system by grain boundary segregation engineering through the reduction of the presence of ferromagnetic phases to ensure a magnetic decoupling of the micrometer-sized Sm(Fe,Ti)12 grains. © 2020 authors. Published by the American Physical Society. Published by the American Physical Society under the terms of the "https://creativecommons.org/licenses/by/4.0/"Creative Commons Attribution 4.0 International license. Further distribution of this work must maintain attribution to the author(s) and the published article's title, journal citation, and DOI. Open access publication funded by the Max Planck Society.

A face-centered cubic (FCC) phase in electro-polished specimens for transmission electron microscopy of commercially pure titanium has sometimes been reported. Here, a combination of atom-probe tomography, scanning transmission electron microscopy and low-loss electron energy loss spectroscopy is employed to study both the crystal structural and chemical composition of this FCC phase. Our results prove that the FCC phase is actually a TiHx (x ≥ 1) hydride, and not a new allotrope of Ti, in agreement with previous reports. The formation of the hydride is discussed. © 2019 Acta Materialia Inc.

We investigated the solute diffusional behavior active during compressive creep deformation at 150 MPa / 975 °C of a Co-Al-W-Ta single crystal superalloy in the [001] orientation. We report the formation of shear-bands that involves re-orientation of γ/γʹ rafts to {111} from {001} planes, referring to as γ/γ′ raft-rotation. In the shear-band regions, we observed abundant micro-twins, stacking faults (SFs), disordered zones within the γʹ termed as ‘γ pockets’ and also few geometrically-close-packed (GCP) phases. We used a correlative approach blending electron microscopy and atom probe tomography to characterize the structure and composition of these features. The SFs were identified as intrinsic and exhibit a W enrichment up to 14.5 at.% and an Al deficiency down to 5.1 at.%, with respect to the surrounding γʹ phase. The micro-twin boundaries show a solute enrichment similar to the SFs with a distinct W compositional profile gradients perpendicular from the boundaries into the twin interior, indicating solute diffusion within the micro-twins. The γ-pockets have a composition close to that of γ but richer in W/Ta. Based on these observations, we propose (i) a solute diffusion mechanism taking place during micro-twinning, (ii) a mechanism for the γ/γʹ raft-rotation process and evaluate their influence on the overall creep deformation of the present Co-based superalloy. © 2019

Based on our recently-developed combinatorial processing platforms for accelerated investigations of phase evolution in multinary alloys, a novel correlative atom probe tomography and transmission electron microscopy approach is proposed to study phase stability in a nanocrystalline CrMnFeCoNi alloy. We observed that the material can decompose at 250 °C for 5 h or 300 °C for 1 h, having the same decomposed products as in its coarse-grained counterpart after annealing at 500 °C for 500 days. A low apparent activation energy for the diffusion of Ni in the nanocrystalline alloy is derived and explains the fast kinetics of phase decomposition in nanocrystalline alloys. © 2020 Acta Materialia Inc.

Phase stability of a nanocrystalline CrCoNi alloy is investigated using the combinatorial processing platform approach, which enables synthesis, processing and direct atomic-scale characterizations of alloys by atom probe tomography and transmission electron microscopy. Phase decomposition with formation of CoNi-rich phase occurs faster in the smaller (10 nm) grain-sized region than the larger one (20 nm), both being present in the same sample. Chemical analyses indicate that diffusion of Co and Cr plays an important role in phase decomposition. Comparison of phase stability between CrMnFeCoNi and CrCoNi implies that elemental segregation may promote phase decomposition by providing an additional chemical driving force for it. © 2020 Acta Materialia Inc.

In the present work, we investigate the stress and temperature dependence of low-temperature (750 ± 20 °C) and high-stress (300 ± 20 MPa) shear creep of a Ni-base single crystal superalloy. From continuous isothermal experiments and stress and temperature change tests the stress exponent n and the apparent activation energy Qapp of the phenomenological Sherby-Dorn equation were determined for the two macroscopic crystallographic shear systems (MCSS) [011¯](111) and [112¯](111). The activation parameters of creep, the stress exponents and the apparent activation energies were identified as 16 and 620 kJ/mol (MCSS: [011¯](111)) and 14 and 460 kJ/mol (MCSS: [112¯](111)). We show that during shear creep testing these phenomenological parameters do not change between the early (0.5–1% strain) and later stages of creep (4.5–5% strain), in contrast to what was observed for uniaxial tensile testing. The results are discussed in the light of what is known about stress and temperature dependencies of deformation rates in the creep literature and in view of the recent work by Bürger et al., 2020, who combined shear creep testing with analytical transmission electron microscopy to identify the elementary deformation mechanism, which governs low temperature and high stress creep. © 2020 The Authors

Ag–V–O thin-film materials libraries, with both composition (Ag22-77V23-78Ox) and thickness (123–714 nm) gradients were fabricated using combinatorial reactive magnetron co-sputtering aiming on establishing relations between composition, structure, and functional properties. As-deposited libraries were annealed in air at 300 °C for 10 h. High-throughput characterization methods of composition, structure and functional properties were used to identify photoelectrochemically active regions. The phases AgV6O15, Ag2V4O11, AgVO3, and Ag4V2O7 were observed throughout the composition gradient. The photoelectrochemical properties of Ag–V–O films are dependent on composition and morphology. An enhanced photocurrent density (~300–554 μA/cm2) was obtained at 30 to 45 at.% Ag along the thickness gradient. Thin films of these compositions show a nanowire morphology, which is an important factor for the enhancement of photoelectrochemical performance. The photoelectrochemically active regions were further investigated by high-throughput synchrotron-X-ray diffraction and transmission electron microscopy (Ag32V68Ox) which confirmed the presence of Ag2V4O11 as the dominating phase along with the minor phases AgV6O15 and AgVO3. This enhanced photoactive region shows bandgap values of ~2.30 eV for the direct and ~1.87 eV for the indirect bandgap energies. The porous nanostructured films improve charge transport and are hence of interest for photoelectrochemical water splitting. © 2020 Hydrogen Energy Publications LLC

Molybdenum disulfide (MoS2) is known for its versatile properties and hence is promising for a wide range of applications. The fabrication of high quality MoS2either as homogeneous films or as two-dimensional layers on large areas is thus the objective of intense research. Since industry requirements on MoS2thin films can hardly be matched by established exfoliation fabrication methods, there is an enhanced need for developing new chemical vapor deposition (CVD) and atomic layer deposition (ALD) processes where a rational precursor selection is a crucial step. In this study, a new molybdenum precursor, namely 1,4-di-tert-butyl-1,4-diazabutadienyl-bis(tert-butylimido)molybdenum(vi) [Mo(NtBu)2(tBu2DAD)], is identified as a potential candidate. The combination of imido and chelating 1,4-diazadieneyl ligand moieties around the molybdenum metal center results in a monomeric compound possessing adequate thermal characteristics relevant for vapor phase deposition applications. Hexagonal MoS2layers are fabricated in a metalorganic CVD (MOCVD) process with elemental sulfur as the co-reactant at temperatures between 600 °C and 800 °C. The structure and composition of the films are investigated by X-ray diffraction, high resolution transmission electron microscopy, synchrotron X-ray photoelectron spectroscopy and Raman spectroscopy revealing crystalline and stoichiometric MoS2films. The new MOCVD process developed for MoS2is highly promising due to its moderate process conditions, scalability and controlled targeted composition. © The Royal Society of Chemistry 2020.

Alloying nanocrystalline copper (Cu) with immiscible elements, such as tantalum (Ta) and zirconium (Zr), is a promising technique to manipulate grain boundary properties and by this suppress grain growth at elevated temperatures. However, insights on the atomistic origins on the influence of impurity elements on grain boundaries are lacking. In this study, the atomistic effects of Ta and Zr on [111] tilt grain boundaries in Cu are investigated by high resolution scanning transmission electron microscopy techniques. In case of Ta, the formation of spherical, nano-scale precipitates in close vicinity to the grain boundaries is observed, but no sign of segregation. The particles induce a repelling force to migrating boundaries and act as local pinning points. The segregation of Zr is observed to occur either at confined grain boundary steps or homogeneously along the boundaries without steps. In both cases a strong disordering of the defect or grain boundary structure is revealed. Furthermore, at low Zr concentrations it induces structural grain boundary transitions and partial atomic reordering of the grain boundary structural units. © 2020 Acta Materialia Inc.

CrCoNi exhibits the best combination of strength and ductility among all the equiatomic single-phase FCC subsets of the CrMnFeCoNi high-entropy alloy. Here, its yield strength was determined in compression as a function of grain size and temperature. Yield strength was also plotted as a function of "crystallite" size, which takes into account both annealing twin boundaries and grain boundaries. The resulting Hall-Petch slopes were straight lines but with different slopes that depend on the number of twin boundaries per grain. Scanning transmission electron microscopy of deformed specimens revealed the formation of dislocation pile-ups at grain and annealing twin boundaries indicating that the latter also act as obstacles to slip and contribute to strength. Using a simple pile-up model, the strengths of the grain and twin boundaries were estimated to lie in the range 900-1250 »MPa. Assuming that they have the same strength, in the case of twin boundaries this strength corresponds roughly to the stress required to constrict Shockley partials, which suggests that dissociated dislocations have to become compact before they can cross the annealing twin boundaries. © 2019 The Authors.

CoFe2O4 nanoparticles (NPs) were synthesized by using a colloidal one-pot synthesis method based on the decomposition of metal acetylacetonates in the presence of oleyl amine. The characterization by X-ray diffraction, transmission electron microscopy and N2 physisorption revealed non-porous spinel phase CoFe2O4 NPs with an average particle size of 4 nm. The unsupported metal oxide NPs were applied in the selective oxidation of 2-propanol in a continuously operated fixed-bed reactor under quasi steady-state conditions using a heating rate of 0.5 k min−1. 2-Propanol was found to be oxidatively dehydrogenated over CoFe2O4 yielding acetone and H2O with high selectivity. Only to a minor extent dehydration to propene and total oxidation to CO2 was observed at higher temperatures. The detected low-temperature reaction pathway with maxima at 430 and 510 K was inhibited after the initial 2-propanol oxidation up to 573 K, but an oxidative treatment in O2 or N2O atmosphere led to full regeneration. No correlation between the desorbing amount or the surface oxygen species investigated by O2 temperature-programmed desorption experiments and the low-temperature activity was observed. The amounts of evolving CO2 during the TPO experiments indicate deactivation due to formation of carbonaceous species. Inhibition experiments with pre-adsorbed reaction intermediates and infrared spectroscopy identified acetate species as reversible poison, whereas carbonates are rather spectators. In addition, carbon deposition was detected by X-ray photoelectron spectroscopy, which also revealed a minor influence of cobalt reduction during the deactivation process as confirmed by X-ray absorption spectroscopy studies. © 2019 Elsevier Inc.

Monometallic Mo and W carbides as well as highly mixed (Mo,W) carbides with various Mo/W ratios were synthesized directly on oxygen-functionalized carbon nanotubes (OCNTs), and used as noble-metal-free electrocatalysts in the hydrogen evolution reaction (HER) under both acidic and alkaline conditions. A purely orthorhombic structure was found in both monometallic and mixed carbide samples by X-ray diffraction. Transmission electron microscopy images showed that the carbide particles were highly dispersed on the OCNTs with well-controlled particle size. The homogeneous distribution of Mo and W in the carbides was confirmed by elemental mapping. (Mo,W)2C/OCNT with a Mo/W ratio of 3 : 1 showed the lowest overpotential to reach a current density of 10 mA/cm2 (87 mV in 0.1 M KOH and 92 mV in 0.5 M H2SO4), and the smallest Tafel slope of 34 mV/dec. Long-term stability under both alkaline and acidic conditions was demonstrated for 24 h. Our results revealed that an optimal amount of W in the mixed carbide can significantly improve its performance in the HER following the Tafel reaction pathway, most likely due to the weakened Mo−Hads bond. © 2020 The Authors. Published by Wiley-VCH Verlag GmbH & Co. KGaA.

High entropy alloys are generally considered to be single phase material. This state is, however, typically a non-equilibrium state after fabrication at high cooling rates. Phase constitution after fabrication or heat treatment is mostly known for isothermal annealing only and for casts as well as rapidly quenched alloys. Knowledge on early phase separation stages of high entropy alloys and their mechanisms are missing so far. Here, we present results on phase separation at intermediate cooling rates, by characterization of gas atomized powder of the AlCoCr0.75Cu0.5FeNi alloy. Although investigation by X-ray diffraction and Electron Backscatter Diffraction indicates a single-phase nature of the powder particles, aberration-corrected scanning transmission electron microscopy and atom probe tomography reveal a nanoscale phase separation into Ni–Al-rich B2 and Fe–Cr-rich A2 regions as well as a high number density of 3.1 × 1024 Cu-rich clusters per m3 in the B2 matrix. The observed phase separation and cluster formation are linked to spinodal decomposition and nucleation processes, respectively. The study highlights that adequate characterization techniques need to be chosen when making statements about phase stability and structural evolution in compositionally complex alloys. © 2019 The Authors

A universal nano-capillary based method for sample deposition on the silicon nitride membrane of liquid-cell transmission electron microscopy (LCTEM) chips is demonstrated. It is applicable to all substances which can be dispersed in a solvent and are suitable for drop casting, including catalysts, biological samples, and polymers. Most importantly, this method overcomes limitations concerning sample immobilization due to the fragility of the ultra-thin silicon nitride membrane required for electron transmission. Thus, a straightforward way is presented to widen the research area of LCTEM to encompass any sample which can be externally deposited beforehand. Using this method, NixB nanoparticles are deposited on the μm-scale working electrode of the LCTEM chip and in situ observation of single catalyst particles during ethanol oxidation is for the first time successfully monitored by means of TEM movies. © 2020 The Authors. Published by Wiley-VCH Verlag GmbH & Co. KGaA.

Millions worldwide suffer from arthritis of the hips, and total hip replacement is a clinically successful treatment for end-stage arthritis patients. Typical hip implants incorporate a cobalt alloy (Co–Cr–Mo) femoral head fixed on a titanium alloy (Ti-6Al-4V) femoral stem via a Morse taper junction. However, fretting and corrosion at this junction can cause release of wear particles and metal ions from the metallic implant, leading to local and systemic toxicity in patients. This study is a multiscale structural-chemical investigation, ranging from the micrometer down to the atomic scale, of the underlying mechanisms leading to metal ion release from such taper junctions. Correlative transmission electron microscopy and atom probe tomography reveals microstructural and compositional alterations in the subsurface of the titanium alloy subjected to in vitro gross-slip fretting against the cobalt alloy. Even though the cobalt alloy is comparatively more wear-resistant, changes in the titanium alloy promote tribocorrosion and subsequent degradation of the cobalt alloy. These observations regarding the concurrent occurrence of electrochemical and tribological phenomena are vital to further improve the design and performance of taper junctions in similar environments. © 2020 The Authors. Published by WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim

Laves phases belong to the group of tetrahedrally close-packed intermetallic phases, and their crystal structure can be described by discrete layer arrangements. They often possess extended homogeneity ranges and the general notion is that deviations from stoichiometry are accommodated by anti-site atoms or vacancies. The present work shows that excess Nb atoms in a Nb-rich NbFe2 C14 Laves phase can also be incorporated in various types of planar defects. Aberration-corrected scanning transmission electron microscopy and density functional theory calculations are employed to characterize the atomic configuration of these defects and to establish stability criteria for them. The planar defects can be categorized as extended or confined ones. The extended defects lie parallel to the basal plane of the surrounding C14 Laves phase and are fully coherent. They contain the characteristic Zr4Al3-type (O) units found in the neighboring Nb6Fe7 µ phase. An analysis of the chemical bonding reveals that the local reduction of the charge transfer is a possible reason for the preference of this atomic arrangement. However, the overall layer stacking deviates from that of the perfect µ phase. The ab initio calculations establish why these exceptionally layered defects can be more stable configurations than coherent nano-precipitates of the perfect µ phase. The confined defects are observed with pyramidal and basal habit planes. The pyramidal defect is only ~1 nm thick and resembles the perfect µ phase. In contrast, the confined basal defect can be regarded as only one single O unit and it appears as if the stacking sequence is disrupted. This configuration is confirmed by ab initio calculations to be metastable. © 2019

Chemical zoning in igneous minerals is a potential record of the time, processes, and thermal evolution during the lifetime of a given magma reservoir. Abundances of volatiles (OH, Cl and F) in apatite from terrestrial and extraterrestrial plutonic and volcanic rocks have been used to study volatile behavior in magmas, however, volatile diffusivities in apatite are poorly constrained. Here we report new experimental results on Cl, F and OH diffusivities in apatite and apply them to estimate magma ascent times and rates. The experiments were carried out on oriented natural Durango fluorapatite crystals at 800–1100 °C, 1-atm, and oxygen fugacity at the wüstite-magnetite buffer. Experimental charges and chemical profiles were investigated with a variety of methods, including scanning electron microscopy, transmission electron microscopy, electron probe microanalysis, secondary ion mass spectrometry, and nuclear reaction analysis. We find that the concentration profiles of Cl show evidence of uphill diffusion that is likely related to the co-existence of three monovalent anions, i.e., OH−, Cl−, F−, at the same site of the apatite structure. Chemical gradients of OH, Cl and F were reproduced using a multicomponent diffusion model to extract the tracer diffusion coefficient (Di⁎) of each component (i). The calculated values of Di⁎ parallel to the c-axis show a general relation of DF⁎>DCl⁎>DOH⁎, and define the following Arrhenius relations (parallel to the c-axis, at 1 bar) as: [Formula presented] [Formula presented] [Formula presented] The activation energy for Cl diffusion that we determined (294 kJ⋅mol−1) is within the range of that reported by Brenan (1994), but the pre-exponential factor is smaller and thus we obtain in general slower diffusivities than Brenan (1994). DCl⁎ and DOH⁎ parallel to the a-axis are 1 to 2 orders of magnitude slower than those parallel to the c-axis, indicating anisotropic diffusion of Cl and OH. Preliminary results on S diffusivity (parallel to the c-axis) at 800–900 °C show values between those of Cl and OH. The diffusion coefficients and model proposed in this study can be used to estimate the timescales of volatile re-equilibration in apatite in a variety of contexts from plutonic rocks and layered intrusions, to volcanic rocks and meteorites. We show that, for example, magma ascent rates can be determined by modelling Cl zoning in volcanic apatite. These applications provide new opportunities for understanding the influence of magma ascent rates on the eruption styles of volcanoes, thus having potential contributions to improving volcano forecasting and hazard assessments. © 2020

The influence of (Al,Zn)3Zr dispersoids on the precipitation of the main strengthening (Mg,Zn)-rich phases was investigated during isothermal aging of a model Al-Zn-Mg-Cu-Zr alloy. Upon homogenization of the alloy, dispersoids of (Al,Zn)3Zr with a L12 structure are present. Isothermal aging at 120 °C for 0.5 h leads to the homogeneous formation of spherical GP zones in the α-Al matrix and heterogeneous nucleation on (Al,Zn)3Zr dispersoids. After 2 h of aging, GP zones remain present in the α-Al matrix while the accelerated transformation of GP zones to plate-shaped (Mg,Zn)-rich ηʹ precipitates is shown on the {111} planes at the interface of the L12 dispersoids. Even at grain boundaries, the similar composite structure comprising ηʹ precipitates on the coarser Zr-dispersoid is observed, along with 10-nm wide precipitate-free zones around them. The composition and structure of pre-existing dispersoids, their role in the formation of the composite structure are discussed. © 2020

We report the synthesis of a bulk nanostructured alloy using laser-powder bed fusion. The equiatomic AlCoCrFeMnNi chemically complex alloy forms a nanoscale modulated structure, which is homogeneously distributed in the as-built condition. The nanostructure consists of Al & Ni-rich ordered and Cr & Fe-rich disordered BCC phases. The two phases form an interconnected phase network with coherent interface boundaries. Atom probe tomography and aberration-corrected scanning transmission electron microscopy analysis of the spatial distribution of the modulated structure suggests the occurrence of nano-scale spinodal decomposition. These results introduce a direct synthesis of bulk nanostructured alloys with promising geometric flexibility. © 2020 Elsevier B.V.

The structural changes of copper hexacyanoferrate (CuHCF), a Prussian blue analogue, which occur when used as a cathode in an aqueous Zn-ion battery, are investigated using electron microscopy techniques. The evolution of ZnxCu1−xHCF phases possessing wire and cubic morphologies from initial CuHCF nanoparticles are monitored after hundreds of cycles. Irreversible introduction of Zn ions to CuHCF is revealed locally using scanning transmission electron microscopy. A substitution mechanism is proposed to explain the increasing Zn content within the cathode material while simultaneously the Cu content is lowered during Zn-ion battery cycling. The present study demonstrates that the irreversible introduction of Zn ions is responsible for the decreasing Zn ion capacity of the CuHCF cathode in high electrolyte concentration. © 2019 The Authors. Published by Wiley-VCH Verlag GmbH & Co. KGaA.

Combining high-resolution transmission electron microscopy (HR-TEM) and 3-dimensional atom probe tomography (3D-APT), the early stages of nucleation and growth of vanadium carbonitrides (VCN) were revealed. VCN nucleation starts with locally distorted body-centered cubic (bcc) lattices due to a substitution of Fe atoms by V atoms, which results in the formation of an intermediate coherent crystal structure within the ferrite matrix. Misfit strain self-accommodation leads to twining within the VCN particles. As the particles grow, the precipitates gradually lose coherency and grow into discs or plates. Simultaneously, the intermediate crystal structure of the nucleus transforms into the equilibrium VCN-structure. © 2020

Bottom-up and top-down approaches are described for the challenging synthesis of Fe/Al nanoparticles (NPs) in ionic liquids (ILs) under mild conditions. The crystalline phase and morphology of the metal nanoparticles synthesized in three different ionic liquids were identified by powder X-ray diffractometry (PXRD), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), selected-area electron diffraction (SAED) and fast Fourier transform (FFT) of high-resolution TEM images. Characterization was completed by scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM-EDX) for the analysis of the element composition of the whole sample consisting of the NPs and the amorphous background. The bottom-up approaches resulted in crystalline FeAl NPs on an amorphous background. The top-down approach revealed small NPs and could be identified as Fe4Al13 NPs which in the IL [OPy][NTf2] yield two absorption bands in the green-blue to green spectral region at 475 and 520 nm which give rise to a complementary red color, akin to appropriate Au NPs. © 2020 The Royal Society of Chemistry.

We introduce a new perspective on the classical massive mode of solid-state phase transformation enabled by the correlative use of atomic-scale electron microscopy and atom probe tomography. This is demonstrated in a binary MnAl alloy which has Heusler-like characteristics. In this system, the τ phase formed by a massive transformation from the high-temperature ε phase is metastable and ferromagnetic. The transformation results in a high density of micro-twins inside the newly grown τ phase. Atomic-scale compositional analysis across the interface boundaries and atomic structure of the micro-twins reveals the involvement of both structural modification and also the compositional partitioning during the growth of the τ phase. This is assisted by the migrating τ/ε interface boundary during transformation. Finally, the role of micro-twins on nucleating the equilibrium phases and the influence of the defects and phase formation on the magnetic properties are discussed. © 2019 Acta Materialia Inc.

In situ nanomechanical testing provides critical insight into the fundamental processes that lead to deformation phenomena in materials. Often, in situ tests are performed in relevant conditions such as high or low temperatures, tribological contact, gas environments, or under radiation exposure. Modern diffraction and imaging methods of materials under load provide high spatial resolution and enable extraction of quantitative mechanical data from local microstructure components or nano-sized objects. The articles in this issue cover recent advances in different types of in situ nanomechanical testing methods, spanning from dedicated nanomechanical testing platforms and microelectromechanical systems devices to deformation analyses via in situ diffraction and imaging methods. This includes scanning electron microscopy, advanced scanning transmission electron microscopy, electron diffraction, x-ray diffraction, and synchrotron techniques. Emerging areas such as in situ tribology enable novel insights into the origin of deformation mechanisms, while the evolution of microelectromechanical systems for controlled in situ testing provide opportunities for advanced control and loading strategies. Discussion on the current state of the art for in situ nanomechanical testing and future opportunities in imaging, strain sensing, and testing environments are also addressed. Copyright © Materials Research Society 2019.

The microstructural and compositional evolution of intergranular carbides and borides prior to and after creep deformation at 850 °C in a polycrystalline nickel-based superalloy was studied. Primary MC carbides, enveloped within intergranular γ′ layers, decomposed resulting in the formation of layers of the undesirable η phase. These layers have a composition corresponding to Ni3Ta as measured by atom probe tomography and their structure is consistent with the D024 hexagonal structure as revealed by transmission electron microscopy. Electron backscattered diffraction reveals that they assume various misorientations with regard to the adjacent grains. As a consequence, these layers act as brittle recrystallized zones and crack initiation sites. The composition of the MC carbides after creep was altered substantially, with the Ta content decreasing and the Hf and Zr contents increasing, suggesting a beneficial effect of Hf and Zr additions on the stability of MC carbides. By contrast, M5B3 borides were found to be microstructurally stable after creep and without substantial compositional changes. Borides at 850 °C were found to coarsen, resulting in some cases into γ′- depleted zones, where, however, no cracks were observed. The major consequences of secondary phases on the microstructural stability of superalloys during the design of new polycrystalline superalloys are discussed. © 2018 Acta Materialia Inc.

The direct growth of Pt islands on lattice mismatched Ni nanoparticles is a major synthetic challenge and a promising strategy to create highly strained Pt atoms for electrocatalysis. By using very mild reaction conditions, Pt islands with tunable strain were formed directly on Ni branched particles. The highly strained 1.9 nm Pt-island on branched Ni nanoparticles exhibited high specific activity and the highest mass activity for hydrogen evolution (HER) in a pH 13 electrolyte. These results show the ability to synthetically tune the size of the Pt islands to control the strain to give higher HER activity. Copyright © 2019 American Chemical Society.

Sputter deposition is one of the most important techniques for the fabrication of memristive devices. It allows us to adjust the concentration of defects within the fabricated metal-oxide thin film layers. The defect concentration is important for those memristive devices whose resistance changes during device operation due to the drift of ions within the active layer while an electric field is applied. Reversible change of the resistance is an important property for devices used in neuromorphic circuits to emulate synaptic behavior. These novel bioinspired hardware architectures are ascertained in terms of advantageous features such as lower power dissipation and improved cognitive capabilities compared to state-of-the-art digital electronics. Thus, memristive devices are intensively studied with regard to neuromorphic analog systems. Double-barrier memristive devices with the layer sequence Nb/Al/Al2O3/NbOx/Au are promising candidates to emulate analog synaptic behavior in hardware. Here, the niobium oxide acts as the active layer, in which charged defects can drift due to an applied electric field causing analog resistive switching. In this publication, crucial parameters of the process plasma for thin film deposition, such as floating potential, electron temperature, and the energy flux to the substrate, are correlated with the I-V characteristics of the individual memristive devices. The results from plasma diagnostics are combined with microscopic and simulation methods. Strong differences in the oxidation state of the niobium oxide layers were found by transmission electron microscopy. Furthermore, kinetic Monte Carlo simulations indicate the impact of the defect concentration within the NbOx layer on the I-V hysteresis. The findings may enable a new pathway for the development of plasma-engineered memristive devices tailored for specific application. © 2019 Author(s).

Light elements play a crucial role on the microstructure and properties of conventional alloys and steels. Oxygen is one of the light elements which is inevitably introduced into nanocrystalline alloys during manufacturing. Here, we report that severe plastic deformation can fragment the oxides formed in powder processing and eventually cause oxygen dissolution in the matrix. A comparative investigation on Cu-Fe nanocrystalline alloys generated from different initial materials, blended powders and arc-melted bulk materials which have different oxygen contents, reveals that fragmented oxides at grain boundaries effectively decrease the grain boundary mobility, markedly facilitating grain refinement. In contrast, those oxygen atoms dissolved as interstitials in the Cu-Fe matrix lead to lattice expansion and significant decrease of stacking fault energy locally as validated by density functional theory. Such oxygen-mediated microstructure gives rise to enhanced strength and superior structural stability. The remarkable tailoring effect of oxygen can be employed to engineer nanocrystalline materials with desired properties for different applications. © 2018 Acta Materialia Inc.

Defects such as planar faults in thermoelectric materials improve their performance by scattering phonons with short and medium mean free paths (3–100 nm), thereby reducing the lattice thermal conductivity,κl. Understanding statistically the microscopic distribution of these extended defects within the grains and in low angle grain boundaries is necessary to tailor and develop materials with optimal thermoelectric performance for waste heat harvesting. Herein, we analyze these defects from the millimeter down to the nanometer scale in a AgSbTe2 thermoelectric material with low angle grain boundaries. The investigations were performed using electron channeling contrast imaging combined with transmission electron microscopy. The microstructure study was complemented by estimating the effect of planar faults on the phonon scattering using the Debye-Callaway model. AgSbTe2 is a promising thermoelectric material, which exhibits extremely low thermal conductivity, κ, of 0.5 Wm−1K−1 at room temperature. In contrast to conventional alloys or intermetallic materials, in the present material small angle grain boundaries are not composed of individual dislocations but of a dense arrangement of stacked planar faults with fault densities up to NPF=1.6⋅108m−1. We explain their abundance based on their low interfacial energy of about 186 mJm−2 calculated ab-initio. The current findings show, that it is possible to reach very high densities of phonon-scattering planar faults by the correct microstructure engineering in AgSbTe2 thermoelectric materials. © 2019 Acta Materialia Inc.

We study the isolated contribution of hole localization for well-known charge carrier recombination properties observed in conventional, polar InGaN quantum wells (QWs). This involves the interplay of charge carrier localization and non-radiative transitions, a non-exponential decay of the emission and a specific temperature dependence of the emission, denoted as “s-shape”. We investigate two dimensional In0.25Ga0.75N QWs of single monolayer (ML) thickness, stacked in a superlattice with GaN barriers of 6, 12, 25 and 50 MLs. Our results are based on scanning and high-resolution transmission electron microscopy (STEM and HR-TEM), continuous-wave (CW) and time-resolved photoluminescence (TRPL) measurements as well as density functional theory (DFT) calculations. We show that the recombination processes in our structures are not affected by polarization fields and electron localization. Nevertheless, we observe all the aforementioned recombination properties typically found in standard polar InGaN quantum wells. Via decreasing the GaN barrier width to 6 MLs and below, the localization of holes in our QWs is strongly reduced. This enhances the influence of non-radiative recombination, resulting in a decreased lifetime of the emission, a weaker spectral dependence of the decay time and a reduced s-shape of the emission peak. These findings suggest that single exponential decay observed in non-polar QWs might be related to an increasing influence of non-radiative transitions. © 2019, The Author(s).

Determination of the intrinsic electrocatalytic activity of nanomaterials by means of macroelectrode techniques is compromised by ensemble and film effects. Here, a unique “particle on a stick” approach is used to grow a single metal–organic framework (MOF; ZIF-67) nanoparticle on a nanoelectrode surface which is pyrolyzed to generate a cobalt/nitrogen-doped carbon (CoN/C) composite nanoparticle that exhibits very high catalytic activity towards the oxygen evolution reaction (OER) with a current density of up to 230 mA cm−2 at 1.77 V (vs. RHE), and a high turnover frequency (TOF) of 29.7 s−1 at 540 mV overpotential. Identical location transmission electron microscopy (IL-TEM) analysis substantiates the “self-sacrificial” template nature of the MOF, while post-electrocatalysis studies reveal agglomeration of Co centers within the CoN/C composite during the OER. “Single-entity” electrochemical analysis allows for deriving the intrinsic electrocatalytic activity and furnishes insight into the transient behavior of the electrocatalyst under reaction conditions. © 2019 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim

A medium-Mn steel (Fe-12Mn-3Al-0.05C wt%) was designed using Thermo-Calc ® simulations to balance the fraction and stacking fault energy of reverted austenite. Intercritical annealing for 0.5, 8 and 48 h was carried out at 585 °C to investigate the microstructural evolution. X-ray diffraction (XRD), electron backscatter diffraction (EBSD), 3-dimensional EBSD, energy-dispersive spectroscopy via scanning-transmission electron microscopy (STEM-EDS) and atom probe tomography (APT) enable characterization of phase fraction, grain area, grain morphology and alloy partitioning. An increase in annealing time from 0.5 h to 48 h increases the amount of ultrafine-grained (UFG) reverted austenite from 3 to 40 vol %. EBSD and TEM reveal multiple morphologies of UFG austenite (equiaxed, rod-like and plate-like). In addition, most of the remaining microstructure consists of recovered α′-martensite that resembles the cold-rolled state, as well as a relatively small fraction of UFG ferrite (i.e., only a small amount of martensite recrystallization occurs). Multi-scale characterization results show that the location within the cold-rolled microstructure has a strong influence on boundary mobility and grain morphology during austenite reversion. Results from APT reveal Mn-decoration of dislocation networks and low-angle lath boundaries in the recovered α′-martensite, but an absence of Mn-decoration of defects in the vicinity of austenite grains, thereby promoting recovery. STEM-EDS and APT reveal Mn depletion zones in the ferrite/recovered α′-martensite near austenite boundaries, whereas gradients of C and Mn co-partitioning are visible within some of the austenite grains after annealing for 0.5 h. Relatively flat C-enriched austenite boundaries are present even after 8 h of annealing and indicate certain boundaries possess low mobility. At later stages the growth of austenite followed the local equilibrium (LE) model such that the driving force between two equilibrium phases moves the mobile interface, as confirmed by DICTRA simulations (a Thermo-Calc ® diffusion module). The sequence of austenite reversion is: (i) formation of Mn- and C-enriched face-centered-cubic nuclei from decorated dislocations and/or particles; (ii) co-partitioning of Mn and C and (iii) growth of austenite controlled by the LE mode. © 2019 Acta Materialia Inc.

Crystalline Co3O4 nanoparticles with a uniform size of 9 nm as shown by X-ray diffraction (XRD) and transmission electron microscopy (TEM) were synthesized by thermal decomposition of cobalt acetylacetonate in oleylamine and applied in the oxidation of 2-propanol after calcination. The catalytic properties were derived under continuous flow conditions as a function of temperature up to 573 K in a fixed-bed reactor at atmospheric pressure. Temperature-programmed oxidation, desorption (TPD), surface reaction (TPSR), and 2-propanol decomposition experiments were performed to study the interaction of 2-propanol and O2 with the exposed spinel surfaces. Co3O4 selectively catalyzes the oxidative dehydrogenation of 2-propanol, yielding acetone and H2O and only to a minor extent the total oxidation to CO2 and H2O at higher temperatures. The high catalytic activity of Co3O4 reaching nearly full conversion with 100% selectivity to acetone at 430 K is attributed to the high amount of active Co3+ species at the catalyst surface as well as surface-bound reactive oxygen species observed in the O2 TPD, 2-propanol TPD, TPSR, and 2-propanol decomposition experiments. Density functional theory calculations with a Hubbard U term support the identification of the 5-fold-coordinated octahedral surface Co5c3+ as the active site, and oxidative dehydrogenation involving adsorbed atomic oxygen was found to be the energetically most favored pathway. The consumption of surface oxygen and reduction of Co3+ to Co2+ during 2-propanol oxidation derived from X-ray absorption spectroscopy and X-ray photoelectron spectroscopy measurements before and after reaction and poisoning by strongly bound carbonaceous species result in the loss of the low-temperature activity, while the high-temperature reaction pathway remained unaffected. © 2019 American Chemical Society.

Tungsten (W) and various composites are being considered as the primary plasma-facing materials for fusion reactors. Like all engineering materials, they contain certain levels of impurities, which can have an important impact on mechanical properties. In the present work, oxygen was identified as a major impurity in our starting tungsten powder. At elevated temperatures, the presence of interstitial elements such as oxygen leads to the formation of an oxide-rich tungsten phase at the tungsten grain boundaries. In this study, we determined the capacity of tungsten carbide (WC) nanoparticles to remove the oxide impurities from a tungsten body. Tungsten composites with 0.05, 0.25 and 0.51 wt. % carbon (C) in the form of WC were sintered using a field-assisted sintering technique (FAST) at 1900 °C for 5 min. The sintered samples were characterized using field-emission scanning and transmission electron microscopy. Thermodynamic and kinetic considerations allowed us to determine the optimum theoretical amount of WC to prevent the in-situ formation of WO2. © 2019 Andreja Šestan, Janez Zavašnik, Marjeta Maček Kržmanc, Matej Kocen, Petra Jenuš, Saša Novak, Miran Čeh, Gerhard Dehm

The microstructural evolution in the single crystal Ni-base superalloy ERBO/1 (CMSX 4 type) is investigated after load controlled low cycle fatigue (LCF) at 950 °C (load-ratio: 0.6, tensile stress range: 420–740 MPa, test frequency: 0.25 Hz, fatigue rupture life: about 1000 - 3000 cycles). Bulk topologically close packed (TCP) phase particles precipitated and were analyzed by three-dimensional focus ion beam slice and view imaging and analytical transmission electron microscopy. The particles did not precipitate homogenously but at locations with enhanced levels of local stresses/strains, such as isolated γ-channels subjected to cross channel stresses, shear bands and in front of micro cracks. The influence of stress/strain is furthermore apparent in the spatial arrangement and the shape of the TCP phase particles. Only μ-phase TCP particles were found by electron diffraction. Results of a structure-map analysis suggest that most of these TCP particles observed after LCF testing would not precipitate in thermodynamic equilibrium. In order to rationalize this effect, the atomic volume was analyzed that transition-metal (TM) elements take in unary fcc and in unary μ-phase crystal structures and found that all TM elements except Zr and V take a larger volume in a unary μ phase than in a unary fcc phase. This trend is in line with the observed localized precipitation of TCP phases that are rich in Ni and other late TM elements. The experimental and theoretical findings suggest consistently that formation of TCP particles in LCF tests is considerably influenced by the local tensile stress/strain states. © 2019 Acta Materialia Inc.

Small-punch and nano-indentation tests were used for the first time to probe strength of 500 μm thin Ni50Ti50 shape memory platelets in their hydrogen-free and hydrogen-doped states. Results show excellent reproducibility and suggest that hydrogen penetrates the alloy more efficiently during the cathodic charging at ambient temperatures as compared to heat treatments in a controlled hydrogen atmosphere. Hydrogen content exceeding 100 wtppm results in a retransformation from the B19′ martensite to the R lattice and causes a systematic drop of the rupture strength. The retransformation events in thin surface lamellae were documented by the transmission electron microscopy. © 2018 Elsevier Ltd

Bimetallic alloyed silver-platinum nanoparticles (AgPt NP) with different metal composition from Ag10Pt90 to Ag90Pt10 in steps of 20 mol% were synthesized. The biological effects of AgPt NP, including cellular uptake, cell viability, osteogenic differentiation and osteoclastogenesis as well as the antimicrobial activity towards Staphylococcus aureus and Escherichia coli were analyzed in comparison to pure Ag NP and pure Pt NP. The uptake of NP into human mesenchymal stem cells was confirmed by cross-sectional focused-ion beam preparation and observation by scanning and transmission electron microscopy in combination with energy-dispersive x-ray analysis. Lower cytotoxicity and antimicrobial activity were observed for AgPt NP compared to pure Ag NP. Thus, an enhanced Ag ion release due to a possible sacrificial anode effect was not achieved. Nevertheless, a Ag content of at least 50 mol% was sufficient to induce bactericidal effects against both Staphylococcus aureus and Escherichia coli. In addition, a Pt-related (≥50 mol% Pt) osteo-promotive activity on human mesenchymal stem cells was observed by enhanced cell calcification and alkaline phosphatase activity. In contrast, the osteoclastogenesis of rat primary precursor osteoclasts was inhibited. In summary, these results demonstrate a combinatory osteo-promotive and antimicrobial activity of bimetallic Ag50Pt50 NP. © 2019 IOP Publishing Ltd.

Small-punch and nano-indentation tests were used for the first time to probe strength of 500 μm thin Ni 50 Ti 50 shape memory platelets in their hydrogen-free and hydrogen-doped states. Results show excellent reproducibility and suggest that hydrogen penetrates the alloy more efficiently during the cathodic charging at ambient temperatures as compared to heat treatments in a controlled hydrogen atmosphere. Hydrogen content exceeding 100 wtppm results in a retransformation from the B19′ martensite to the R lattice and causes a systematic drop of the rupture strength. The retransformation events in thin surface lamellae were documented by the transmission electron microscopy. © 2018 Elsevier Ltd

We report on the crystal and magnetic structures and magnetic and transport properties of SrMnSb2 single crystals grown by the self-flux method. Magnetic susceptibility measurements reveal an antiferromagnetic (AFM) transition at TN=295(3) K. Above TN, the susceptibility slightly increases and forms a broad peak at T∼420 K, which is a typical feature of two-dimensional magnetic systems. Neutron diffraction measurements on single crystals confirm the previously reported C-type AFM structure below TN. Both de Haas-van Alphen (dHvA) and Shubnikov-de Haas (SdH) effects are observed in SrMnSb2 single crystals. Analysis of the oscillatory component by a Fourier transform shows that the prominent frequencies obtained by the two different techniques are practically the same within error regardless of sample size or saturated magnetic moment. Transmission electron microscopy (TEM) reveals the existence of stacking faults in the crystals, which result from a horizontal shift of Sb atomic layers suggesting possible ordering of Sb vacancies in the crystals. Increase of temperature in susceptibility measurements leads to the formation of a strong peak at T∼570 K that upon cooling under magnetic field the susceptibility shows a ferromagnetic transition at TC∼580 K. Neutron powder diffraction on crushed single crystals does not support a ferromagnetic phase above TN. Furthermore, x-ray magnetic circular dichroism (XMCD) measurements of a single crystal at the L2,3 edge of Mn shows a signal due to induced canting of AFM moments by the applied magnetic field. All evidence strongly suggests that a chemical transformation at the surface of single crystals occurs above 500 K concurrently producing a minute amount of ferromagnetic impurity phase. © 2019 American Physical Society.

In the current work we investigate the room temperature tensile properties of a medium-Mn twinning- and transformation-induced plasticity (TWIP-TRIP) steel from quasi-static to low-dynamic strain rates (ε˙ = 10−4 s−1 to ε˙ = 102 s−1). The multi-phase microstructure consists of coarse-grained recovered α'-martensite (inherited from the cold-rolled microstructure), multiple morphologies of ultrafine-grained (UFG) austenite (equiaxed, rod-like and plate-like), and equiaxed UFG ferrite. The multi-phase material exhibits a positive strain-rate sensitivity for yield and ultimate tensile strengths. Thermal imaging and digital image correlation allow for in situ measurements of temperature and local strain in the gauge length during tensile testing, but Lüders bands and Portevin Le Chatelier bands are not observed. A finite-element model uses empirical evidence from electron backscatter diffraction (EBSD) and transmission electron microscopy (TEM), plus constitutive equations to dissect the microstructural influences of grain size, dislocation density and TWIP-TRIP driving forces on tensile properties. Calibration of tensile properties not only captures the strain rate sensitivity of the multi-phase TWIP-TRIP steel, but also provides opportunity for a complete parametric analysis by changing one variable at a time (phase fraction, grain size, strain-induced twin fraction and strain-induced ε-martensite fraction). An equivalent set of high-rate mechanical properties can be matched by changing either the austenite phase fraction or the ratio of twinning vs. transformation to ε-martensite. This experimental-computational framework enables the prediction of mechanical properties in multi-phase steels beyond the experimental regime by tuning variables that are relevant to the alloy design process. © 2019 Acta Materialia Inc.

We investigate the cryogenic deformation response and underlying mechanisms of a carbon-doped interstitial high-entropy alloy (iHEA) with a nominal composition of Fe49.5Mn30Co10Cr10C0.5 (at. %). Extraordinary strain hardening of the iHEA at 77 K leads to a substantial increase in ultimate tensile strength (∼1300 MPa) with excellent ductility (∼50%) compared to that at room temperature. Prior to loading, iHEAs with coarse (∼100 μm) and fine (∼6 μm) grain sizes show nearly single face-centered cubic (FCC) structure, while the fraction of hexagonal close-packed (HCP) phase reaches up to ∼70% in the cryogenically tensile-fractured iHEAs. Such an unusually high fraction of deformation-induced phase transformation and the associated plasticity (TRIP effect) is caused by the strong driving force supported by the reduced stacking fault energy and increased flow stress at 77 K. The transformation mechanism from the FCC matrix to the HCP phase is revealed by transmission electron microscopy (TEM) observations. In addition to the deformation-induced phase transformation, stacking faults and dislocation slip contribute to the deformation of the FCC matrix phase at low strains and of the HCP phase at medium and large strains, suggesting dynamic strain partitioning among these two phases. The combination of TRIP and dynamic strain partitioning explain the striking strain hardening capability and resulting excellent combination of strength and ductility of iHEAs under cryogenic conditions. The current investigation thus offers guidance for the design of high-performance HEAs for cryogenic applications. © 2018 Elsevier B.V.

We study the microstructure formation and mechanical properties of Ti-1Fe (wt%) and Ti-3Fe (wt%) alloys for different heat treatments in the β-phase and α + β-phase regions. By applying different heat treatment routes, we observe different microstructure formation mechanisms causing a wide range of mechanical properties from high strength (1.3 GPa) and low ductility (2%) to intermediate strength (700 MPa) and high ductility (30%) in these simple binary alloys. We performed microstructure characterizsation using scanning electron microscopy, transmission electron microscopy and atom probe tomography to show that the alloying content and heat treatment significantly affect the local martensitic and / or diffusional phase transformations causing the substantial changes in the mechanical behavior. © 2018

A high density of grain boundaries can potentially increase structural materials' strength, but at the expense of losing the materials' strain hardening ability at high flow stress levels. However, endowing materials with grain size gradients and a high density of internal interfaces can simultaneously increase the strength and strain hardening ability. This applies particularly for through-thickness gradients of nanoscale interface structures. Here we apply a machining method that produces metals with nanoscale interface gradients. Conventional bulk plastic deformation such as rolling, a process applied annually to about 2 billion tons of material, aims to reduce the metal thickness. We have modified this process by introducing severe strain path changes, realized by leading the sheet through a U-turn while preserving its shape, an approach known as ‘hard turning’. We applied this process at both room temperature and 77 K to a NiCrCo medium entropy alloy. Micropillar compression was conducted to evaluate the mechanical response. After hard turning at room temperature, the surface microstructure obtained a ∼50% increase in yield stress (0.9 GPa) over the original state with homogeneous grain size (0.4 GPa), but the initial strain hardening rate did not show significant improvement. However, after hard turning at 77 k, the gradient nanolaminate structure tripled in yield stress and more than doubled its initial strain hardening rate. The improvements were achieved by introducing a specific microstructure that consists of gradient nanolaminates in the form of nanospaced twins and martensite in the face center cubic (fcc) phase. This microstructure was formed only at cryogenic temperature. It was found after turning at room temperature that only nanospaced twins were present in the fcc phase inside nanolaminates that had formed at the surface. The origin of the enhanced strain hardening mechanism was studied. Joint density functional theory (DFT) and axial next nearest neighbor Ising (ANNNI) models were used to explain the temperature-dependent phase formation of the NiCrCo nanolaminate at the surface of the hard-turned material. © 2019 Acta Materialia Inc.

The present work compares the microstructures and the creep properties of two types of single crystal Ni-base superalloy CMSX-4 materials (SXs). One was produced by conventional directional solidification Bridgman processing. The other was manufactured by selective electron beam melting (SEBM). The microstructures of the two types of materials are compared with emphasis placed on the large (dendritic/interdendritic regions) and small scale (γ-matrix/γ′-precipitates) microstructural heterogeneities, which characterize SX microstructures and their evolution during processing, heat treatment and creep. It is shown that heat treated SEBM materials have creep properties, which match or even outperform those of conventionally processed SX materials. Creep properties were assessed using a miniature creep test technique where [001] miniature tensile creep specimens were tested in the high temperature/low stress (1050 °C, 160 MPa) and in the low temperature/high stress (850 °C, 600 MPa) creep regimes. The creep behavior is interpreted based on microstructural results, which were obtained using analytical scanning and transmission electron microscopy (SEM and TEM). © 2019 The Authors

Cu-Cr alloys with ∼32 at.% Cr were rapidly solidified by splat quenching or laser melting techniques with the intention to form a very fine grained, non-equilibrium nanostructure similar to those obtained by severe plastic deformation or thin film deposition. The rapidly solidified Cu-Cr alloys were analyzed by X-ray diffraction, scanning electron microscopy and transmission electron microscopy. Both synthesis techniques lead to a similar two-phase microstructure with a nearly pure fcc Cu matrix with μm grain sizes and bcc Cr particles highly supersaturated with Cu. Splat quenching provides finer bcc particles with dimensions of less than 50 nm compared to laser melting with particle sizes of 100–2000 nm. In case of laser melting, (14 ± 2) at.% Cu are contained in the bcc phase, while splat quenching freezes (20 ± 2) at.% Cu in the bcc particles. The microstructures are discussed and compared to the non-equilibrium microstructures reported in literature using severe plastic deformation and thin films deposition. © 2019 Elsevier B.V.

A density variation in shear bands visible by electron microscopy is correlated with compositionally altered locations measured by atom-probe tomography in plastically-deformed Al 85.6 Y 7.5 Fe 5.8 metallic-glass ribbons. Two compositionally distinct regions are identified along shear bands, one is Al-rich (~92 at.%), the other is Al-depleted (~82.5 at.%) and both regions show marginal concentration fluctuations of Y and Fe. The elemental re-distribution is observed within shear bands only, and no chemical exchange with the surrounding glassy matrix is observed. © 2019

The structure and chemistry of the orthorhombic O′ phase after quenching of a Ti-23 at.%Nb-2 at.%O was measured using aberration-corrected transmission electron microscopy and atom probe tomography. The nanosized O′ phase, formed in the vicinity of ω, is enriched with oxygen and slightly depleted in Nb. Upon annealing, ω dissolves and the O′ phase develops in β up to 350 °C, above which temperature it transforms to colonies of fine α phase. Another needle-like form of α with lower Nb content is thought to nucleate from Nb-lean regions related to spinodal decomposition of β. © 2019 Elsevier Ltd

Linear defects, referred to as dislocations, determine the strength, formability, and toughness of crystalline metallic alloys. The associated deformation mechanisms are well understood for traditional metallic materials consisting of one or two prevalent matrix elements such as steels or aluminum alloys. In the recently developed high-entropy alloys (HEAs) containing multiple principal elements, the relationship between dislocations and the mechanical behavior is less understood. Particularly HEAs with a hexagonal close-packed (hcp) structure can suffer from intrinsic brittleness due to their insufficient number of slip systems. Here we report on the surprisingly high formability of a novel high-entropy phase with hcp structure. Through in situ tensile testing and postmortem characterization by transmission electron microscopy we reveal that the hcp phase in a dual-phase HEA (Fe50Mn30Co10Cr10, at. %) activates three types of dislocations, i.e., a ©, ccopy;, and +a©. Specifically, nonbasal c+a© dislocations occupy a high line fraction of ∼31% allowing for frequent double cross slip which explains the high deformability of this high-entropy phase. The hcp structure has a c/a ratio of 1.616, i.e., below the ideal value of 1.633. This modest change in the structure parameters promotes nonbasal c+a© slip, suggesting that ductile HEAs with hcp structure can be designed by shifting the c/a ratio into regimes where nonbasal slip systems are activated. This simple alloy design principle is particularly suited for HEAs due to their characteristic massive solid solution content which readily allows tuning the c/a ratio of hcp phases into regimes promoting nonbasal slip activation. © 2019 American Physical Society.

The formation of dislocation substructures in up to 10 µm deep subsurface regions of two aluminium alloys, Al-5Mg and Al-11Zn, was investigated under conditions of high homologous temperature reciprocal sliding wear (HT-RSW). Under creep conditions, Al-5Mg shows a solid solution type of inverse primary creep. In contrast, Al-11Zn creeps obstacle controlled and exhibits normal primary creep. These two materials were subjected to reciprocal sliding wear at 200 and 300 °C for 100 and 1000 cycles. Flat polished disks were exposed to the 1 mm reciprocal movements of a spherical aluminium oxide counterbody under normal forces of 5 and 10 N at an oscillation frequency of 1 Hz. Using focused ion beam (FIB) micromachining thin electron transparent foils were prepared from the surface regions of the as received and worn material states. Transmission electron microscopy (TEM) was used to study the evolution of nano and micro grain sizes in the surface regions. Despite the different creep behavior, the two materials behave similar under conditions of reciprocal sliding wear. The results obtained in the present work show that subgrain sizes decrease with increasing numbers of wear cycles and increasing normal forces. Subgrain sizes also increase with increasing temperature. At 300 °C, dynamic recrystallization was observed in both Al-alloys. The results of the present work are discussed in the light of previous results reported in the literature. Areas in need of further work are highlighted. © 2018 Elsevier B.V.

Metal-nanoparticles (M-NPs) were synthesized in a wet-chemical synthesis route in tunable aryl alkyl ionic liquids (TAAILs) based on the 1-aryl-3-alkyl-substituted imidazolium motif from Ru3(CO)12 and Ir4(CO)12 by microwave-heating induced thermal decomposition. The size and size dispersion of the NPs were determined by transmission electron microscopy (TEM) to an average diameter of 2.2(±0.1) to 3.9(±0.3) nm for Ru-NPs and to an average diameter of 1.4(±0.1) to 2.4(±0.1) nm for Ir-NPs. The TAAILs used contain the same bis(trifluoromethylsulfonyl)imide anion but differ in the substituents on the 1-aryl ring, e.g. 2-methyl-, 4-methoxy- and 2,4-dimethyl groups and in the 3-alkyl chain lengths (C4H9, C5H11, C8H17, C9H19, C11H23). All used TAAILs are suitable for the stabilization of Ru- and Ir-NPs over months in the IL dispersion. Different from all other investigations on M-NP/IL systems which we are aware of the particle separation properties of the TAAILs vary strongly as a function of the aryl substituent. Good NP separation can be achieved with the 4-methoxyphenyl- and 2,4-dimethylphenyl-substituted ILs, irrespective of the 3-alkyl chain lengths. Significant aggregation can be observed for 2-methylphenyl-substituted ILs. The good NP separation can be correlated with a negative electrostatic potential at the 4-methoxyphenyl or 4-methylphenyl substituent that is in the para-position of the aryl ring, whereas the 2-(ortho-)methylphenyl group assumes no negative potential. ϵ-ePC-SAFT calculations were used to validate that the interactions between ILs and the washing agents (required for TEM analyses) do not cause the observed aggregation/separation behaviour of the M-NPs. Ru-NPs were investigated as catalysts for the solvent-free hydrogenation of benzene to cyclohexane under mild conditions (70 °C, 10 bar) with activities up to 760 (mol cyclohexane) (mol Ru)-1 h-1 and over 95% conversion in ten consecutive runs for Ru-NPs. No significant loss of catalytic activity could be observed. This journal is © The Royal Society of Chemistry.

Despite having otherwise outstanding mechanical properties, many single-phase medium and high entropy alloys are limited by modest yield strengths. Although grain refinement offers one opportunity for additional strengthening, it requires significant and undesirable compromises to ductility. This work therefore explores an alternative, simple processing route to achieve strength by cold-rolling and annealing an equiatomic CrCoNi alloy to produce heterogeneous, partially recrystallized microstructures. Tensile tests reveal that our approach dramatically increases the yield strength (to ∼1100 MPa) while retaining good ductility (total elongation ∼23%) in the single-phase CrCoNi alloy. Scanning and transmission electron microscopy indicate that the strengthening is due to the non-recrystallized grains retaining their deformation-induced twins and very high dislocation densities. Load-unload-reload tests and grain-scale digital image correlation are also used to study the accumulation of plastic deformation in our highly heterogeneous microstructures. © 2018 Acta Materialia Inc.

The investigation of hard coatings under thermal load is crucial in order to obtain information on the thermal stability and possible changes of microstructure and mechanical properties. In addition, advanced heating studies may also provide feedback for the grain growth mechanism occurring during annealing and thus, help to predict optimum post-growth annealing conditions for producing high-performance hard coatings. Here, we investigate the thermal response of Mo2BC, deposited by bipolar pulsed direct current magnetron sputtering in an industrial chamber on a silicon substrate at a substrate temperature of 380 °C. Ex-situ and in-situ X-ray diffraction and transmission electron microscopy studies are performed at elevated temperatures to track changes in the structure. Whereas the as-deposited nanocomposite coating exhibits small spherical nanocrystals (1.2 nm in diameter) embedded in an amorphous matrix, a fully crystalline structure, mainly consisting of elongated and interconnected crystals with lengths of up to 1 μm, is obtained at elevated annealing temperatures. Hardness and Young's modulus increase by ~8% and ~47%, respectively, compared to the as-deposited coating. Delamination from the silicon substrate only occurs at temperatures above 840 °C. Thus, our detailed study of the micro- and nanostructure evolution upon thermal annealing suggests that heat treatments below 840 °C are a suitable method to improve the crystallinity and mechanical properties of nanocomposite Mo2BC coatings. © 2018

We have investigated the twinning-induced plasticity (TWIP) and transformation-induced plasticity (TRIP) as well as the influence of ω phase on these two phenomena in a metastable β-type Ti–25Nb–0.7Ta–2Zr (at.%) alloy. We set off with two starting states: one is ω-free and the other one contains a high number density (3.20 ± 0.78 × 1024 m−3) of nanometer-sized (∼1.23 nm) ω particles. Deformation experiments demonstrate that the plastic deformation of the ω-free alloy is mediated by stress-induced β → α” martensitic transformation, {332} twinning and dislocation slip, where the former two induce joint TRIP and TWIP effects and the latter one carries the majority of the plastic strain. In the ω-enriched alloy, the ω particles fully suppress the TWIP and TRIP effects and promote localization of dislocation plasticity into specific ω-devoid channels. Atom probe tomography analysis reveals that the elemental partitioning between β and ω results in only subtle enrichment of solutes in the β matrix, which cannot sufficiently stabilize the matrix to prevent martensitic transformation and twinning. A new mechanism based on the shear modulus difference between β and ω is proposed to explain the suppression of TRIP and TWIP effects by ω particles. © 2018 Acta Materialia Inc.

The structural and chemical changes at ω/β interfaces and the evolution of the morphology of ω in a near-β alloy during isothermal ageing at 573 K were investigated by atom probe tomography and aberration-corrected high-resolution transmission electron microscopy. Ledges and local O enrichment at semi-coherent isothermal ω interfaces are proposed to provide the key driving force for nucleation of ω-assisted α. Following nucleation of α, the morphology of ω evolves from ellipsoidal to rod-like, induced by rapid consumption of ω by α. © 2018 Acta Materialia Inc.

The high-entropy-alloy Al0.7CoCrFeNi (molar ratio) was prepared by vacuum arc melting followed by directional solidification (DS) with <001> oriented seed. The unique lamellar-dendrite microstructure was obtained over a wide cooling rate range. During solidification, Fe and Co are prone to segregate to the dendrite, while Cr and Al segregate to interdendrite. The solute pile-up of Cr and Al at the solid/liquid interface leads to the dendritic solidification. During the following cooling process, the BCC phase precipitates from the FCC dendrite to form the lamellar structure, while the ordered B2 phase precipitates from the interdendrite. Moreover, the lamellar spacing is significantly refined with increasing cooling rate, resulting in the higher hardness and compressive yield strength. Directional solidification is proved to be an efficient way to improve the mechanical properties of multi-phases high-entropy alloys. © 2017 Elsevier Ltd

A composition-spread Cu-Zr thin film library with Zr contents from 2.5 up to 6.5 at.% was synthesized by magnetron sputtering on a thermally oxidized Si wafer. The compositional and microstructural variations of the Cu-Zr thin film across the composition gradient were examined using energy dispersive X-ray spectroscopy, X-ray diffraction, and high-resolution scanning and transmission electron microscopy of cross-sections fabricated by focused ion beam milling. Composition-dependent hardness and elastic modulus values were obtained by nanoindentation for measurement areas with discrete Zr contents along the composition gradient. Similarly, the electrical resistivity was investigated by 4-point resistivity measurements to study the influence of Zr composition and microstructural changes in the thin film. Both, the mechanical and electrical properties reveal a significant increase in hardness and resistivity with increasing Zr content. The trends of the mechanical and functional properties are discussed with respect to the local microstructure and composition of the thin film library. © 2017

Mo-Si-B alloys are potential creep resistant materials for accessing harsh loading scenarios beyond Ni-based superalloys due to their excellent mechanical performance at ultra-high temperatures (> 1200 °C). Here, we report on the fabrication through laser additive manufacturing of a Mo rich Mo-Si-B alloy with and without dispersion of oxide (La2O3) particles. The major phase in the solidified material is dendritic α-Mo. The inter-dendritic regions contain a mixture of the Mo5Si3 (T1) + Mo5SiB2 (T2) phases, and not the expected equilibrium Mo3Si + Mo5SiB2 (T2) phases. This combination of phases is shown to yield improved high temperature creep resistance but was only accessible through by addition of Nb, W or Ti that substitute Mo in the intermetallic phases. Whereas here it is attributed to the large undercooling in the small melt pool produced during laser processing. We show that this phase mixture, upon annealing, is stable at 1200 °C for 200 h. We also demonstrate successful dispersion of oxide particles mainly in the inter-dendritic regions leading to a high indentation fracture toughness of ∼18 MPa√m at room temperature. Toughening originates from crack trapping in the ductile α-Mo and the formation of micro-cracks and crack deflection in the vicinity of oxide particles. © 2018 Acta Materialia Inc.

An ex situ approach combining fast quenching experiments in a dilatometer and postmortem microstructural observation in transmission electron microscopy (TEM) has been used to observe the dynamic microstructure change during differential scanning calorimetry (DSC) ramping of an Fe–10Cr–0.15C (wt%) alloy fabricated from high-purity components. The DSC measurements reveal two exothermic events at temperatures about 270 and 600 °C in a heating process. The two events were discerned by TEM investigations on specimens interrupted during thermal ramping in a dilatometer. It is found that precipitation and growth of M3C carbide occurred first in a temperature range between 200 and 400 °C, following the Bagaryatskii orientation relationship. Subsequently, M7C3 carbides precipitate on prior martensitic laths boundaries in a temperature range between 500 and 700 °C at the expense of M3C. M23C6 carbides were found precipitating on the interface between M7C3 and matrix at approximately the same time with the precipitation of M7C3. The obtained results are also compared with an in situ TEM heating experiment, and differences between the two approaches are discussed. © 2018, Springer Science+Business Media, LLC, part of Springer Nature.

Carbon nanostructures with a well-developed turbostratic sp2 structure and high porosity are synthesized at room temperature inside a planetary ball mill. The obtained carbons were analyzed in-depth by means of gas adsorption, wide-angle X-ray scattering (WAXS), Raman spectroscopy, and transmission electron microscopy (TEM). Our approach involves the solvent-free reaction between calcium carbide (CaC2) and hexachlorobenzene (C6Cl6) conducted under mechanochemical conditions. After certain mechanical activation time, the exothermic nature of the reaction (−492 kcal) provokes a combustion-like event that results in innocuous salt (CaCl2) and a carbonaceous material. Carbon with a high degree of structural order in the constituting graphene and the graphene stacks, possessing almost no internal surface, can be obtained after 5 min of milling time with a mass ratio CaC2/C6Cl6 of 0.9, while carbon exhibiting a surface area as high as 915 m2/g can be obtained after 2 h of milling time with a mass ratio CaC2/C6Cl6 of 5.1. WAXS results and TEM observations reveal a mixture of amorphous carbon and non-graphitic phases. Among the last one, spherical-shaped carbons and curved nanosized strips can be easily distinguished. © 2018 Elsevier Ltd

The reproducible fabrication of nanometre-sized carbon electrodes poses great challenges. Especially, the field of single entity electrochemistry has strict requirements regarding the geometry of these electrochemical probes. Herein, an automated setup for the fabrication of carbon nanoelectrodes based on the pyrolysis of a propane/butane gas mixture within pulled quartz capillaries by means of a moving heating coil is presented. It is shown that mere electrochemical characterisation with conventional redox mediators does not allow for a reliable assessment of the electrode's geometry and quality. Therefore, high-throughput transmission electron microscopy is used in parallel to evaluate and optimise preparation parameters. Control of the latter gives access to three different electrode types: nanopipettes, nanosamplers and nanodisks. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim

Bimetallic nanoparticles consisting of silver and platinum were prepared by a modified seeded-growth process in water in the full composition range in steps of 10 mol%. The particles had diameters between 15-25 nm as determined by disc centrifugal sedimentation (DCS) and transmission electron microscopy (TEM). Whereas particles with high platinum content were mostly spherical with a solid silver core/platinum shell structure, mostly hollow alloyed nanoparticles were observed with increasing silver content. The internal structure and the elemental distribution within the particles were elucidated by high-resolution transmission electron microscopy (HRTEM) in combination with energy-dispersive X-ray spectroscopy (EDX). The particles were cytotoxic for human mesenchymal stem cells (hMSC) above 50 mol% silver. This was explained by dissolution experiments where silver was only released at and above 50 mol% silver. In contrast, platinum-rich particles (less than 50 mol% silver) did not release any silver ions. This indicates that the presence of platinum inhibits the oxidative dissolution of silver. © 2018 The Royal Society of Chemistry.

Tensile tests were carried out in high-purity, polycrystalline copper alloys with three concentrations of sulfur impurities (14, 27 and 7920 at ppm) at temperatures between 20 °C and 400 °C. The ductility drops with increasing sulfur concentration and temperature while the ultimate tensile strength increases. The alloys exhibit a grain size of several millimeters and contain mostly random grain boundaries (GBs). The microstructure and composition is investigated by transmission electron microscopy (TEM) and atom probe tomography (APT). The microstructure of the samples with sulfur contents of 14 and 27 ppm consists of globular grains and neither of the microanalytical techniques employed reveals the formation of Cu-sulfides or sulfur segregation to GBs. Even after annealing at 500 °C, no sulfide formation or sulfur segregation to GBs was detected. In the alloy with a sulfur content of 7920 ppm, a dendritic structure is observed and in the interdendritic region monoclinic Cu2S precipitates with a size range from 5 nm to several μm are observed at GBs and also within the grains. The influence of S on the ductility is discussed considering the TEM and APT results. © 2018 Acta Materialia Inc.

The dependence of the microstructure on the degree of deformation in near-surface regions of a 16MnCr5 gear wheel after 2.1 × 106 loading cycles has been investigated by x-ray diffraction analysis, transmission electron microscopy, and atom probe tomography. Retained austenite and large martensite plates, along with elongated lamella-like cementite, were present in a less deformed region. Comparatively, the heavily deformed region consisted of a nanocrystalline structure with carbon segregation up to 2 at.% at grain boundaries. Spheroid-shaped cementite, formed at the grain boundaries and triple junctions of the nanosized grains, was enriched with Cr and Mn but depleted with Si. Such partitioning of Cr, Mn, and Si was not observed in the elongated cementite formed in the less deformed zone. This implies that rolling contact loading induced severe plastic deformation as well as a pronounced annealing effect in the active contact region of the toothed gear during cyclic loading. © 2018 The Minerals, Metals & Materials Society

The effects of quasi-static and low-dynamic strain rate (ε̇ = 10−4 /s to ε̇ = 102 /s) on tensile properties and deformation mechanisms were studied in a Fe-25Mn-3Al-3Si (wt%) twinning and transformation-induced plasticity [TWIP-TRIP] steel. The fully austenitic microstructure deforms primarily by dislocation glide but due to the room temperature stacking fault energy [SFE] of 21 ± 3 mJ/m2 for this alloy, secondary deformation mechanisms such as mechanical twinning (TWIP) and epsilon martensite formation (TRIP) also play an important role in the deformation behavior. The mechanical twins and epsilon-martensite platelets act as planar obstacles to subsequent dislocation motion on non-coplanar glide planes and reduce the dislocation mean free path. A high-speed thermal camera was used to measure the increase in specimen temperature as a function of strain, which enabled the use of a thermodynamic model to predict the increase in SFE. The influence of strain rate and strain on microstructural parameters such as the thickness and spacing of mechanical twins and epsilon-martensite laths was quantified using dark field transmission electron microscopy, electron channeling contrast imaging, and electron backscattered diffraction. The effect of sheet thickness on mechanical properties was also investigated. Increasing the tensile specimen thickness increased the product of ultimate tensile strength and total elongation, but had no significant effect on uniform elongation or yield strength. The yield strength exhibited a significant increase with increasing strain rate, indicating that dislocation glide becomes more difficult with increasing strain rate due to thermally-activated short-range barriers. A modest increase in ultimate tensile strength and minimal decrease in uniform elongation were noted at higher strain rates, suggesting adiabatic heating, slight changes in strain-hardening rate and observed strain localizations as root causes, rather than a significant change in the underlying TWIP-TRIP mechanisms at low values of strain. © 2017 Elsevier B.V.

The microstructure of the subsurface after impact wear of three high-strength high interstitial austenitic steels has been analysed using transmission electron microscopy (TEM) in alloys with C and N as interstitial elements. In all cases, a nanocrystalline region followed by a transition zone and a cold-worked area are present. Additionally, microhardness and nano-scratching tests were conducted to study the wear-related properties of the impact subsurface and the base material. The results of the microstructural analysis reveal that the following mechanisms are involved during impact wear: abrasion (ploughing), microcrack formation associated with contact fatigue, entrapment and adhesion of SiO2 particles. The analysis of the wear-related properties indicates that the subsurface acts as a self-protective layer that prevents the deterioration of the substrate. © 2018 Elsevier B.V.

The deformation mechanisms operating in nanostructured bainite, leading to its excellent combination of strength and ductility, are far from being understood. Its nanocrystalline nature and its multiphase-evolving structure underlie the plastic flow and the strain-hardening behaviour. In this work, the microstructural and crystallographic bulk changes of a high-C nanostructured bainite under tensile testing have been evaluated. The influence of the mechanically-induced transformation of the C-enriched retained austenite into α martensite and other deformation mechanisms on the texture evolution has been analysed by electron backscatter diffraction (EBSD). Additionally, the undeformed and the deformed conditions have been examined by electron channelling contrast imaging (ECCI) and transmission electron microscopy (TEM). Results reveal the presence of plate martensite and suggest a strong variant selection during the transformation, mainly responsible for the texture observed. Mechanical twinning in austenite seems to be basically the mechanism of accommodation of the displacive bainitic transformation, while some direct interaction with the applied stress also appears. © 2018

We studied the role of VC precipitation in improving the shape memory effect (SME) of the as-solution treated Fe–Mn–Si-based shape memory alloys by examining the microstructures developed during aging and deformation using transmission electron microscopy and electron channeling contrast imaging. Our results suggest that VC particles are not the only product of aging. Upon aging at 650 °C, the precipitation of VC particles is accompanied by the formation of profuse dislocations (2.26 ± 0.098 × 1013 m−2). In this case, the SME is not improved compared to the as-solution treated reference state. Upon aging at high temperatures (700–900 °C), a number of stacking faults are formed accompanying the VC precipitation and the SME is significantly improved, where the recovery ratios reach almost twice that of the as-solution treated state (<50%). For these high-temperature aged states, in situ straining experiments reveal that the stacking faults rather than the VC particles play an important role in the stress-induced martensitic transformation, leading to the formation of very thin (<3 nm) martensite plates with a single crystallographic variant within each grain. These martensite plates are in contrast to the very thick (from tens to hundreds of nanometers) and multi-variant martensite plates that prevail in the as-solution treated state. By comparing the characteristics of the martensite plates between the as-solution treated and the high-temperature aged states, the reasons for the improvement of SME by precipitating VC were discussed. © 2018 Acta Materialia Inc.

A reduction in synthesis temperature is favorable for hard coatings, which are designed for industrial applications, as manufacturing costs can be saved and technologically relevant substrate materials are often temperature-sensitive. In this study, we analyzed Mo2BC hard coatings deposited by direct current magnetron sputtering at different substrate temperatures, ranging from 380 °C to 630 °C. Transmission electron microscopy investigations revealed that a dense structure of columnar grains, which formed at a substrate temperature of 630 °C, continuously diminishes with decreasing substrate temperature. It almost vanishes in the coating deposited at 380 °C, which shows nanocrystals of ~1 nm in diameter embedded in an amorphous matrix. Moreover, Argon from the deposition process is incorporated in the film and its amount increases with decreasing substrate temperature. Nanoindentation experiments provided evidence that hardness and Young's modulus are modified by the nanostructure of the analyzed Mo2BC coatings. A substrate temperature rise from 380 °C to 630 °C resulted in an increase in hardness (21 GPa to 28 GPa) and Young's modulus (259 GPa to 462 GPa). We conclude that the substrate temperature determines the nanostructure and the associated changes in bond strength and stiffness and thus, influences hardness and Young's modulus of the coatings. © 2018 The Authors

The strength and toughness of low alloyed ferritic/bainitic steels depend on their microstructure, which evolves during thermo-mechanical treatments along the processing chain. Chromium-molybdenum steel microstructures are complex. Therefore, only a limited number of attempts have been made to fully characterize carbide populations in such steels. In the present work, analytical transmission electron microscopy is employed to study the microstructure of a low alloyed chromium-molybdenum steel, which features ferritic (F, mainly α-iron and niobium-carbides) and bainitic (B, α-phase, dislocation, grain/subgrain boundaries, various MxCy carbides) regions. The crystal structure and chemical nature of more than 200 carbides are determined and their distributions in the two microstructural regions are analyzed. The present work shows how particles can be identified in an effective manner and how the microstructural findings can be interpreted on the basis of thermodynamic calculations. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim

We study the micro-mechanical behaviour of single-crystalline long-period-stacking ordered (LPSO) structures, α-Mg and bi-crystalline Mg/LPSO micro-pillars, all cut from the same Mg97Y2Zn1 (at.%) alloy. To investigate the deformation and co-deformation mechanisms of Mg-LPSO alloys we performed micro-pillar compression experiments with micro-pillars of an orientation inclined by 7°, 46° and 90° to (0001) orientation, respectively. Electron backscatter diffraction-assisted slip trace analysis and post-mortem transmission electron microscopy analysis showed predominant deformation by basal 〈a〉 dislocation slip in 46°(0001) and 7°(0001) oriented micro-pillars. In 7°(0001) oriented micro-pillars additional non-basal dislocation slip and the formation of micro shear bands along pyramidal planes were activated in the α-Mg and the LPSO structure, respectively. In 90°(0001) oriented micro-pillars 11¯001¯1¯20 prismatic slip was predominantly activated during the early deformation stages. The relative magnitude of the critical stresses depends on the crystal phase as well as the crystallographic orientation, i.e. the activated slip system. Specifically, basal 〈a〉 slip has the lowest critical resolved shear stress in both, α-Mg and the LPSO structure, while the CRSS of prismatic 〈a〉 slip is about 5 times higher than basal 〈a〉 slip in α-Mg and about 15 times higher than basal 〈a〉 slip in LPSO. © 2018 Elsevier Ltd

The study is focused on Ni-ion release rates from NiTi surfaces exposed in the cell culture media and human vascular endothelial cell (HUVEC) culture environments. The NiTi surface layers situated in the depth of 70 μm below a NiTi oxide scale are affected by interactions between the NiTi alloys and the bio-environments. The finding was proved with use of inductively coupled plasma mass spectrometry and electron microscopy experiments. As the exclusive factor controlling the Ni-ion release rates was not only thicknesses of the oxide scale, but also the passivation depth, which was two-fold larger. Our experimental data strongly suggested that some other factors, in addition to the Ni concentration in the oxide scale, admittedly hydrogen soaking deep below the oxide scale, must be taken into account in order to rationalize the concentrations of Ni-ions released into the bio-environments. The suggested role of hydrogen as the surface passivation agent is also in line with the fact that the Ni-ion release rates considerably decrease in NiTi samples that were annealed in controlled hydrogen atmospheres prior to bio-environmental exposures. © 2017 Elsevier B.V.

For a comparative cytotoxicity study, nanoparticles of the noble metals Rh, Pd, Ag, Pt, and Au (spherical, average diameter 4 to 8 nm) were prepared by reduction in water and colloidally stabilized with poly(N-vinyl pyrrolidone) (PVP). Thus, their shape, size, and surface functionalization were all the same. Size and morphology of the nanoparticles were determined by dynamic light scattering (DLS), analytical disc centrifugation (differential centrifugal sedimentation, DCS), and high-resolution transmission electron microscopy (HRTEM). Cell-biological experiments were performed to determine the effect of particle exposure on the viability of human mesenchymal stem cells (hMSCs). Except for silver, no adverse effect of any of the metal nanoparticles was observed for concentrations up to 50 ppm (50 mg L-1) incubated for 24 h, indicating that noble metal nanoparticles (rhodium, palladium, platinum, gold) that do not release ions are not cytotoxic under these conditions. © 2018 Rostek et al.

Microstructural length-scale refinement is among the most efficient approaches to strengthen metallic materials. Conventional methods for refining microstructures generally involve grain size reduction via heavy cold working, compromising the material's ductility. Here, a fundamentally new approach that allows load-driven formation and permanent refinement of a hierarchical nanolaminate structure in a novel high-entropy alloy containing multiple principal elements is reported. This is achieved by triggering both, dynamic forward transformation from a faced-centered-cubic γ matrix into a hexagonal-close-packed ε nanolaminate structure and the dynamic reverse transformation from ε into γ. This new mechanism is referred to as the “bidirectional transformation induced plasticity” (B-TRIP) effect, which is enabled through a near-zero yet positive stacking fault energy of γ. Modulation of directionality in the transformation is triggered by local dissipative heating and local micromechanical fields. The simple thermodynamic and kinetic foundations for the B-TRIP effect render this approach generally suited for designing metastable strong and ductile bulk materials with hierarchical nanolaminate substructures. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim

The fracture behaviour and microstructure evolution of sputtered Mo2BC films as a function of their deposition temperature is studied. Bipolar pulsed direct current magnetron sputtering was used to deposit Mo2BC thin films onto Si (100) wafers at substrate temperatures ranging from 380 to 630 °C. Microstructural characterization by transmission electron microscopy revealed that increasing the deposition temperature induces larger and more elongated grains, and a higher degree of crystallinity, transitioning from a partially amorphous to a fully crystalline film. The intrinsic fracture toughness of the Mo2BC films was studied by focussed ion beam milled micro-cantilever bending tests. A mild dependency of the intrinsic fracture toughness on the substrate deposition temperature was found. Fractograph analysis showed that the fracture behaviour was dominated by intergranular fracture or by fracture within the amorphous regions. Additionally, nanoindentation based fracture toughness measurements were used to probe the fracture behaviour of the Mo2BC/Si system, where residual stresses define the ‘apparent’ fracture toughness of the system. Depending on the substrate deposition temperature either compressive or tensile residual stresses developed in the films. This causes a relative change in the system toughness by up to one order of magnitude. The fracture experiments clearly reveal that notched cantilevers provide intrinsic toughness values of a material, while nanoindentation probes the toughness of the entire coating-substrate system. The combination of both techniques provides valuable design information for enhancing fracture resistance of Mo2BC films. © 2018 Elsevier Ltd

The unique combination of atomic-scale composition measurements, employing atom probe tomography, atomic structure determination with picometer resolution by aberration-corrected scanning transmission electron microscopy, and atomistic simulations reveals site-specific linear segregation features at grain boundary facet junctions. More specific, an asymmetric line segregation along one particular type of facet junction core, instead of a homogeneous decoration of the facet planes, is observed. Molecular-statics calculations show that this segregation pattern is a consequence of the interplay between the asymmetric core structure and its corresponding local strain state. Our results contrast with the classical view of a homogeneous decoration of the facet planes and evidence a complex segregation patterning. © 2018 American Physical Society.

Zircaloy-4 (Zr-1.5%Sn-0.2%Fe-0.1%Cr wt%) was electrochemically charged with deuterium to create deuterides and subsequently analysed with atom probe tomography and scanning transmission electron microscopy to understand zirconium hydride formation and embrittlement. At the interface between the hexagonal close packed (HCP) α-Zr matrix and a face centred cubic (FCC) δ deuteride (ZrD1.5–1.65), a HCP ζ phase deuteride (ZrD0.25–0.5) has been observed. Furthermore, Sn is rejected from the deuterides and segregates to the deuteride/α-Zr reaction front. © 2018 Elsevier Ltd

A novel hybrid core-shell structure of ZnO nanowires (NWs)/Ni as a pseudocapacitor electrode was successfully fabricated by atomic layer deposition of a nickel shell, and its capacitive performance was systemically investigated. Transmission electron microscopy and X-ray photoelectron spectroscopy results indicated that the NiO was formed at the interface between ZnO and Ni where the Ni was oxidized by ZnO during the ALD of the Ni layer. Electrochemical measurement results revealed that the Ti/ZnO NWs/Ni (1500 cycles) electrode with a 30 nm thick Ni-NiO shell layer had the best supercapacitor properties including ultrahigh specific capacitance (∼2440 F g-1), good rate capability (80.5%) under high current charge-discharge conditions, and a relatively better cycling stability (86.7% of the initial value remained after 750 cycles at 10 A g-1). These attractive capacitive behaviors are mainly attributed to the unique core-shell structure and the combined effect of ZnO NW arrays as short charge transfer pathways for ion diffusion and electron transfer as well as conductive Ni serving as channel for the fast electron transport to Ti substrate. This high-performance Ti/ZnO NWs/Ni hybrid structure is expected to be one of a promising electrodes for high-performance supercapacitor applications. © 2017 American Chemical Society.

Electron microscopy and atom probe tomography were combined to investigate the crystallography and chemistry of a single twin boundary (TB) in a rare-earth-free ferromagnetic MnAl Heusler alloy. The results establish a significant segregation of Mn along the twin boundaries. An enrichment of approx. ~8 at.% Mn was measured along the twin boundary with a confined depletion outside the twin boundary, suggesting short range solute diffusion occurring during massive transformation. © 2018 Elsevier Ltd

Decomposition of rare-earth tris(N, N'-diisopropyl-2-methylamidinato)metal(III) complexes [RE(MeC(N(iPr)2))3] (RE(amd)3; RE = Pr(III), Gd(III), Er(III)) and tris(2,2,6,6-tetramethyl-3,5-heptanedionato)europium(III) (Eu(dpm)3) induced by microwave heating in the ionic liquids (ILs) 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIm][BF4]), 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([BMIm][NTf2]) and in propylene carbonate (PC) yield oxide-free rare-earth metal nanoparticles (RE-NPs) in [BMIm][NTf2] and PC for RE = Pr, Gd and Er or rare-earth metal-fluoride nanoparticles (REF3-NPs) in the fluoridedonating IL [BMIm][BF4] for RE = Pr, Eu, Gd and Er. The crystalline phases and the absence of significant oxide impurities in RE-NPs and REF3-NPs were verified by powder X-ray diffraction (PXRD), selected area electron diffraction (SAED) and highresolution X-ray photoelectron spectroscopy (XPS). The size distributions of the nanoparticles were determined by transmission electron microscopy (TEM) and high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) to an average diameter of (11 ± 6) to (38 ± 17) nm for the REF3-NPs from [BMIm][BF4]. The RE-NPs from [BMIm][NTf2] or PC showed diameters of (1.5 ± 0.5) to (5 ± 1) nm. The characterization was completed by energy-dispersive X-ray spectroscopy (EDX). © 2018 Siebels et al.

Dislocations have been considered to be an efficient source for scattering midfrequency phonons, contributing to the enhancement of thermoelectric performance. The structure of dislocations can be resolved by electron microscopy whereas their chemical composition and decoration state are scarcely known. Here, we correlate transmission Kikuchi diffraction and (scanning) transmission electron microscopy in conjunction with atom probe tomography to investigate the local structure and chemical composition of dislocations in a thermoelectric Ag-doped PbTe compound. Our investigations indicate that Ag atoms segregate to dislocations with a 10-fold excess of Ag compared with its average concentration in the matrix. Yet the Ag concentration along the dislocation line is not constant but fluctuates from ∼0.8 to ∼10 atom % with a period of about 5 nm. Thermal conductivity is evaluated applying laser flash analysis, and is correlated with theoretical calculations based on the Debye-Callaway model, demonstrating that these Ag-decorated dislocations yield stronger phonon scatterings. These findings reduce the knowledge gap regarding the composition of dislocations needed for theoretical calculations of phonon scattering and pave the way for extending the concept of defect engineering to thermoelectric materials. © 2018 American Chemical Society.

We report the enhancement of fracture toughness and strength of a cobalt‑tantalum-based metallic glass thin film with increasing boron content. The improvement of the mechanical performance is attributed to the formation of a compositionally lamellar compared to uniform glass microstructure, which becomes thinner with increasing boron content as revealed by transmission electron microscopy. Compositional variations across the lamellar structure are revealed by atom probe tomography. Cobalt- and boron-rich regions alternate sequentially, whereas tantalum exhibits slight variations across the lamellae. Our results can be utilized in future design efforts for metallic glass thin films with outstanding mechanical performance. © 2018 Acta Materialia Inc.

We propose here a deformation-induced diffusive phase transformation mechanism occurring during shearing of γ′ ordered phase in a γ/γ′ single crystalline CoNi-based superalloy. Shearing involved the creation and motion of a high density of planar imperfections. Through correlative electron microscopy and atom probe tomography, we captured a superlattice intrinsic stacking fault (SISF) and its associated moving leading partial dislocation (LPD). The structure and composition of these imperfections reveal characteristic chemical – structural contrast. The SISF locally exhibits a D019 ordered structure coherently embedded in the L12 γ′ and enriched in W and Co. Interestingly, the LPD is enriched with Cr and Co, while the adjoining planes ahead of the LPD are enriched with Al. Quantitative analysis of the three-dimensional compositional field in the vicinity of imperfections sheds light onto a new in-plane diffusion mechanism as the LPD moves on specific {111} planes upon application of stress at high temperature. © 2018 Acta Materialia Inc.

Miniature tensile creep specimens are used to investigate the effect of mild circular notches on microstructural evolution during [001] tensile creep of a Ni-base single crystal superalloy. Creep deformed material states from a uniaxial (950 °C, uniaxial stress: 300 MPa) and a circular notched creep specimen (950 °C, net section stress in notch root: 300 MPa) are compared. For both types of tests, creep experiments were interrupted after 81, 169 and 306 h. Quantitative scanning electron microscopy (SEM) is used to assess the evolution of the γ/γ′-microstructure from rafting to topological inversion. Scanning transmission electron microscopy (STEM) was applied to study the evolution of dislocation densities during creep. As a striking new result it is shown that in circular notched specimen, the microstructural evolution is well coupled to the kinetics of the stress redistribution during creep. Rafting, the directional coarsening of the γ′-phase, and the increase of γ-channel dislocation density, start in the notch root before the center of the specimen is affected. When stresses in the circular notched specimens are fully redistributed, the microstructural differences between the notch root and the center of the circular notched specimen disappear. The comparison of the mechanical data and the microstructural findings in uniaxial and circular notched specimens contribute to a better understanding of the role of mild notches, of stress multiaxiality and of strain accumulation in the microstructure evolution of single crystal Ni-base superalloys during creep. The results obtained in the present work are discussed in the light of previous work published in the literature. © 2018 Acta Materialia Inc.

For several decades, the formation of carbon(C)-rich domains upon room temperature aging of supersaturated martensite has been a matter of debate. C-rich tweed-like patterns are observed to form after short aging times at room temperature and coarsen upon further aging. Here, we present a systematic atomic-scale investigation of carbide formation in Fe-15Ni-1C (wt.%) martensite after two to three years of isothermal room temperature aging by a combination of atom probe tomography and transmission electron microscopy. Owing to the sub-zero martensite start temperature of −25 °C, a fully austenitic microstructure is maintained at room temperature and the martensitic phase transformation is initiated during quenching in liquid nitrogen. In this way, any diffusion and redistribution of C in martensite is suppressed until heating up the specimen and holding it at room temperature. The microstructural changes that accompany the rearrangement of C atoms have been systematically investigated under controlled isothermal conditions. Our results show that after prolonged room temperature aging nanometer-sized, plate-shaped η-Fe2C carbides form with a macroscopic martensite habit plane close to {521}. The orientation relationship between the η-Fe2C carbides and the parent martensite grain (α′) follows [001]α’//[001]η, (1¯10) α’//(020)η. The observation of η-Fe2C–carbide formation at room temperature is particularly interesting, as transition carbides have so far only been reported to form above 100 °C. After three years of room temperature aging a depletion of Fe is observed in the η carbide while Ni remains distributed homogenously. This implies that the substitutional element Fe can diffuse several nanometers in martensite at room temperature within three years. © 2018

Metastable Cu-Cr alloy thin films with nominal thickness of 300nm and composition of Cu67Cr33 (at%) are obtained by co-evaporation using molecular beam epitaxy. The microstructure, chemical phase separation and electronic structure are investigated by transmission electron microscopy (TEM). The thin film adopts the body-centered cubic crystal structure and consists of columnar grains with ~50nm diameter. Aberration-corrected scanning TEM in combination with energy dispersive X-ray spectroscopy confirms compositional fluctuations within the grains. Cu- and Cr-rich domains with composition of Cu85Cr15 (at%) and Cu42Cr58 (at%) and domain size of 1-5nm are observed. The alignment of the interface between the Cu- and Cr-rich domains shows a preference for (110)-type habit plane. The electronic structure of the Cu-Cr thin films is investigated by electron energy loss spectroscopy (EELS) and is contrasted to an fcc-Cu reference sample. The experimental EEL spectra are compared to spectra computed by density functional theory. The main differences between bcc-and fcc-Cu are related to differences in van Hove singularities in the electron density of states. In Cu-Cr solid solutions with bcc crystal structure a single peak after the L3-edge, corresponding to a van Hove singularity at the N-point of the first Brillouin zone is observed. Spectra computed for pure bcc-Cu and random Cu-Cr solid solutions with 10at% Cr confirm the experimental observations. The calculated spectrum for a perfect Cu50Cr50 (at%) random structure shows a shift in the van Hove singularity towards higher energy by developing a Cu-Cr d-band that lies between the delocalized d-bands of Cu and Cr. © 2016 Elsevier B.V.

We report the thermal stability of supersaturated CuCr nanocrystallines alloys at the atomic resolution using modern spherical aberration-corrected transmission electron microscopy (TEM) via performing in-situ structural and spectroscopy experiments. It is found that CuCr nanocrystallines are not only subjected to a structural change but also undergo a chemical evolution upon annealing. Chemical destabilization of supersaturated CuCr nanocrystallines occurs at a quite low temperature. Heating triggers a rapid separation of Cu and Cr grains at the forced intermixing zone, accompanied by an obvious decrease of average interface width whereas the grain growth is not significant. Elemental profiles and images recorded in real time reveal that the local compositions vary with heating, which in turn permits to derive the concentration of excess vacancy generated by deformation and observe its evolution with temperature, further to analyze the dynamic behavior in nanocrystalline materials. Electronic structure changes at the interface forced intermixing zone are revealed by the fine structure analysis. The study uncovers the interplay between the thermal stability and chemical decomposition process of bulk nanostructured materials in real-time. © 2017

The Cr phase separation process and kinetics of a metastable Cu96Cr4 alloy film were investigated by isothermal annealing at different temperatures of up to 500 °C using transmission electron microscopy. It is shown that the Cr phase separation proceeds predominantly via enrichment of Cr at grain boundaries and grain boundary diffusion. Temperature dependent diffusion coefficients and the activation energy for grain boundary diffusion of Cr in face–centered cubic Cu are determined from analytical in–situ transmission electron microscopy experiments. In addition, the influence of electron beam irradiation on the diffusion kinetics is considered. © 2016 Elsevier B.V.

The formation of a ternary μ-phase is documented for the system Co-Ti-W. The relevant compositional stability range is identified by high-throughput energy dispersive X-ray spectroscopy, electrical resistance and X-ray diffraction maps from a thin-film materials library (1 μm thickness). Bulk samples of the identified compositions were fabricated to allow for correlative film and bulk studies. Using analytical scanning and transmission electron microscopy, we demonstrate that in both, thin film and bulk samples, the D85 phase (μ-phase) coexists with the C36-phase and the A2-phase at comparable average chemical compositions. Young's moduli and hardness values of the μ-phase and the C36-phase were determined by nanoindentation. The trends of experimentally obtained elastic moduli are consistent with density functional theory (DFT) calculations. DFT analysis also supports the experimental findings, that the μ-phase can solve up to 18 at.% Ti. Based on the experimental and DFT results it is shown that CALPHAD modeling can be modified to account for the new findings. © 2017 Acta Materialia Inc.

The element Re is known to be a very potent strengthener concerning the creep properties of Ni-base superalloys. In this paper the influence of Re on the properties of new γ′-strengthened Co-base superalloys is addressed. Atom probe tomography reveals that Re partitions preferentially to the γ phase, but not as pronounced as in ni-base superalloys. Nanoindentation and micro-pillar compression tests of the γ′ phase indicate an increase of the hardness and the critical resolved shear stress caused by a considerable concentration of Re in the γ′ phase. Creep investigations show that the positive effect of Re is by far not as pronounced as in Ni-base superalloys. Several effects, which can contribute to this behavior, such as the lower Re concentration in γ and hence a slightly reduced effective diffusion coefficient, a smaller diffusion barrier of Re in Co compared to Ni, a slightly lower lattice misfit and γ′ volume fraction of the Re-containing alloy, are discussed. © Materials Research Society 2017.

We investigated the deformation mechanisms of long period stacking ordered (LPSO) structures in an extruded Mg97Y2Zn1 (at%) alloy. Tensile deformation was performed in such a way that basal slip and kink band formation were inhibited. Slip trace analysis and transmission electron microscopy reveal a predominant activity of non-basal < a> slip. © 2016 Elsevier B.V.

The tensile properties of CrCoNi, a medium-entropy alloy, have been shown to be significantly better than those of CrMnFeCoNi, a high-entropy alloy. To understand the deformation mechanisms responsible for its superiority, tensile tests were performed on CrCoNi at liquid nitrogen temperature (77 K) and room temperature (293 K) and interrupted at different strains. Microstructural analyses by transmission electron microscopy showed that, during the early stage of plasticity, deformation occurs by the glide of 1/2<110> dislocations dissociated into 1/6<112> Shockley partials on {111} planes, similar to the behavior of CrMnFeCoNi. Measurements of the partial separations yielded a stacking fault energy of 22 ± 4 mJ m−2, which is ∼25% lower than that of CrMnFeCoNi. With increasing strain, nanotwinning appears as an additional deformation mechanism in CrCoNi. The critical resolved shear stress for twinning in CrCoNi with 16 μm grain size is 260 ± 30 MPa, roughly independent of temperature, and comparable to that of CrMnFeCoNi having similar grain size. However, the yield strength and work hardening rate of CrCoNi are higher than those of CrMnFeCoNi. Consequently, the twinning stress is reached earlier (at lower strains) in CrCoNi. This in turn results in an extended strain range where nanotwinning can provide high, steady work hardening, leading to the superior mechanical properties (ultimate strength, ductility, and toughness) of medium-entropy CrCoNi compared to high-entropy CrMnFeCoNi. © 2017 Acta Materialia Inc.

We investigated a high-purity cold-rolled martensitic Fe-9wt%Mn alloy. Tensile tests performed at room temperature after tempering for 6 h at 450 °C showed discontinuous yielding. Such static strain ageing phenomena in Fe are usually associated with the segregation of interstitial elements such as C or N to dislocations. Here we show by correlative transmission electron microscopy (TEM)/atom probe tomography (APT) experiments that in this case Mn segregation to edge dislocations associated with the formation of confined austenitic states causes similar effects. The local chemical composition at the dislocation cores was investigated for different tempering temperatures by APT relative to the adjacent bcc matrix. In all cases the Mn partitioning to the dislocation core regions matches to the one between ferrite and austenite in thermodynamic equilibrium at the corresponding tempering temperature. Although a stable structural and chemical confined austenitic state has formed at the dislocation cores these regions do not grow further even upon prolonged tempering. Simulation reveals that the high Mn enrichment along the edge dislocation lines (25 at.%Mn at 450 °C) cannot be described merely as a Cottrell atmosphere formed by segregation driven by size interaction. Thermodynamic calculations based on a multiscale model indicate that these austenite states at the dislocation cores are subcritical and defect-stabilized by the compression stress field of the edge dislocations. Phenomenologically, these states are the 1D equivalent to the so-called complexions which have been extensively reported to be present at 2D defects, hence have been named linear complexions. © 2016 Acta Materialia Inc.

A binary nanocrystalline Cu67Cr33 thin film alloy consisting of columnar grains was synthesized via co-evaporation of the constituent elements under non-equilibrium ultra-high vacuum conditions using molecular beam epitaxy. In the as-deposited state, the alloy film is a supersaturated solid solution with a single-phase body-centered cubic structure. In order to study the thermal stability of the microstructure and phase separation behavior towards the two phase equilibrium structure, isothermal annealing experiments in a temperature range of 150 °C – 500 °C were conducted inside a transmission electron microscope and compared to data obtained by X-ray diffraction under protective N2 atmosphere. It is shown that the single-phase nature of the alloy film is maintained for annealing temperatures of ≤ 300 °C, whereas heat treatment at temperatures of ≥ 400 °C results in the formation of a second phase, i.e. the equilibrium face-centered cubic phase of Cu. Phase separation proceeds predominantly by a spinodal-type decomposition process but a simultaneous diffusion of Cr along the columnar grain boundaries to the surface of the alloy film is observed as well. Temperature dependent diffusion coefficients for volume and grain boundary diffusion along with the activation energy for volume diffusion of Cr within the crystal lattice of the alloy film in a temperature range between 400 °C – 500 °C are determined from analytical in situ transmission electron microscopy experiments. Moreover, grain boundary diffusion of Cr leads to the growth of an external Cr-rich oxide scale. It is found that the growth kinetics of this oxide scale exhibits a transition from a linear to a nearly parabolic growth rate. © 2016 Elsevier B.V.

Thermoelectric (TE) materials are of utmost significance for conversion of heat flux into electrical power in the low-power regime. Their conversion efficiency depends strongly on the microstructure. AgSbTe2-based compounds are high-efficiency TE materials suitable for the mid-temperature range. Herein, we explore an Ag16.7Sb30Te53.3 alloy (at %) subjected to heat treatments at 380 °C for different durations aimed at nucleation and coarsening of Sb2Te3-precipitates. To characterize the Sb2Te3-precipitation, we use a set of methods combining thermal and electrical measurements in concert with transmission electron microscopy and atom probe tomography. We find correlations between the measured TE transport coefficients and the applied heat treatments. Specifically, the lowest electrical and thermal conductivity values are obtained for the as-quenched state, whereas the highest values are observed for alloys aged for 8 h. In turn, long-term heat treatments result in intermediate values of transport coefficients. We explain these findings in terms of interplay between precipitate formation and variations in the matrix composition, highlighting the importance of thermal stability of the material under service conditions. © 2017 American Chemical Society.

The thermal stability and the quantification of the different transformation processes involved in the overall crystallization of the Fe50Cr15Mo14C15B6 amorphous alloy were investigated by several characterization techniques. Formation of various metastable and stable phases during the devitrification process in the sequence α-Fe, χ-Cr6Fe18Mo5, M23(C,B)6, M7C3, η-Fe3Mo3C and FeMo2B2 (with M = Fe, Cr, Mo), was observed by in-situ synchrotron high energy X-ray diffraction and in-situ transmission electron microscopy. By combining these techniques with differential scanning calorimetry data, the crystallization states and their temperature range of stability under continuous heating were related with the evolution of the crystallized fraction and the phase sequence as a function of temperature, revealing structural and chemical details of the different transformation mechanisms. © 2017 Acta Materialia Inc.

The thermal stability of evaporated copper–chromium alloy films was studied by correlating hardness trends from nanoindentation to nanostructural–compositional changes from transmission electron microscopy. In particular, the hardness evolution with ageing time at ambient and elevated temperatures of two compositions, dilute (Cu96Cr4) and chromium-rich (Cu67Cr33) solutions, was studied. Due to the negligible mutual miscibility of copper and chromium, the chosen solid solutions are trapped in metastable states as supersaturated solid solutions with face-centred cubic and body-centred cubic phases. Nano-mechanical probing of the nanostructural evolution as a function of temperature provided interesting insights into the phase separation of these systems. © 2016, Springer Science+Business Media New York.

By doping the TiO2 support with nitrogen, strong metal-support interactions (SMSI) in Pd/TiO2 catalysts can be tailored to obtain high-performance supported Pd nanoparticles (NPs) in nitrobenzene (NB) hydrogenation catalysis. According to the comparative studies by X-ray diffraction, X-ray photoelectron spectroscopy (XPS), and diffuse reflectance CO FTIR (CO-DRIFTS), N-doping induced a structural promoting effect, which is beneficial for the dispersion of Pd species on TiO2. High-angle annular dark-field scanning transmission electron microscopy study of Pd on N-doped TiO2 confirmed a predominant presence of sub-2 nm Pd NPs, which are stable under the applied hydrogenation conditions. XPS and CO-DRIFTS revealed the formation of strongly coupled Pd-N species in Pd/TiO2 with N-doped TiO2 as support. Density functional theory (DFT) calculations over model systems with Pdn (n = 1, 5, or 10) clusters deposited on TiO2(101) surface were performed to verify and supplement the experimental observations. In hydrogenation catalysis using NB as a model molecule, Pd NPs on N-doped TiO2 outperformed those on N-free TiO2 in terms of both catalytic activity and stability, which can be attributed to the presence of highly dispersed Pd NPs providing more active sites, and to the formation of Pd-N species favoring the dissociative adsorption of the reactant NB and the easier desorption of the product aniline. (Figure Presented). © 2016 American Chemical Society.

We report on the strengthening and strain hardening mechanisms in an aged high-Mn lightweight steel (Fe-30.4Mn-8Al-1.2C, wt.%) studied by electron channeling contrast imaging (ECCI), transmission electron microscopy (TEM), atom probe tomography (APT) and correlative TEM/APT. Upon isothermal annealing at 600 °C, nano-sized κ-carbides form, as characterized by TEM and APT. The resultant alloy exhibits high strength and excellent ductility accompanied by a high constant strain hardening rate. In comparison to the as-quenched κ-free state, the precipitation of κ-carbides leads to a significant increase in yield strength (∼480 MPa) without sacrificing much tensile elongation. To study the strengthening and strain hardening behavior of the precipitation-hardened material, deformation microstructures were analyzed at different strain levels. TEM and correlative TEM/APT results show that the κ-carbides are primarily sheared by lattice dislocations, gliding on the typical face-centered-cubic (fcc) slip system {111}<110>, leading to particle dissolution and solute segregation. Ordering strengthening is the predominant strengthening mechanism. As the deformation substructure is characterized by planar slip bands, we quantitatively studied the evolution of the slip band spacing during straining to understand the strain hardening behavior. A good agreement between the calculated flow stresses and the experimental data suggests that dynamic slip band refinement is the main strain hardening mechanism. The influence of κ-carbides on mechanical properties is discussed by comparing the results with that of the same alloy in the as-quenched, κ-free state. © 2017 Acta Materialia Inc.

In this work, the nanostructure of a Mo2BC hard coating was determined by several transmission electron microscopy methods and correlated with the mechanical properties. The coating was deposited on a Si (100) wafer by bipolar pulsed direct current magnetron sputtering from a Mo2BC compound target in Ar at a substrate temperature of 630 °C. Transmission electron microscopy investigations revealed structural features at various length scales: bundles (30 nm to networks of several micrometers) consisting of columnar grains (∼10 nm in diameter), grain boundary regions with a less ordered atomic arrangement, and defects including disordered clusters (∼1.5 nm in diameter) as well as stacking faults within the grains. The most prominent defect with a volume fraction of ∼0.5% is the disordered clusters, which were investigated in detail by electron energy loss spectroscopy and atom probe tomography. The results provide conclusive evidence that Ar is incorporated into the Mo2BC film as disordered Ar-rich Mo-B-C clusters of approximately 1.5 nm in diameter. Hardness values of 28 ± 1 GPa were obtained by nanoindentation tests. The Young's modulus of the Mo2BC coating exhibits a value of 462 ± 9 GPa, which is consistent with ab initio calculations for crystalline and defect free Mo2BC and measurements of combinatorically deposited Mo2BC thin films at a substrate temperature of 900 °C. We conclude that a reduction of the substrate temperature of 270 °C has no significant influence on hardness and Young's modulus of the Mo2BC hard coating, even if its nanostructure exhibits defects. © 2017 Author(s).

Oxide-dispersion strengthened (ODS) Eurofer steel is targeted for structural applications in future fusion nuclear reactors. Samples were cold rolled down to 80% reduction in thickness and annealed at 1350 °C up to 8 h. The microstructural characterization was performed using Vickers microhardness testing, electron backscatter diffraction, scanning and scanning transmission electron microscopies. Experimental results provide evidence of coarsening of the Y-rich oxide particles in ODS-Eurofer steel annealed at 1350 °C within delta ferrite phase field. © 2016 Elsevier B.V.

Deformation twinning contributes to a high work-hardening rate through modification of the dislocation structure and a dynamic Hall-Petch effect in polycrystalline steel. Due to the well-defined compression axis and limited deformation volume of micro-pillars, micro-compression testing is a suitable method to investigate the mechanisms of deformation twinning and the interactions of dislocations with twin boundaries. The material investigated is an austenitic Fe-22 wt%Mn-0.6 wt%C twining-induced plasticity steel. Micro-pillars oriented preferentially for deformation twinning and dislocation glide are compressed and the activated deformation systems are characterized. We observe that deformation twinning induces higher flow stresses and a more unstable work-hardening behavior than dislocation glide, while dislocation glide dominated deformation results in a stable work-hardening behavior. The higher flow stresses and unstable work-hardening behavior in micro-pillars oriented for deformation twinning are assumed to be caused by the activation of secondary slip systems and accumulated plastic deformation. © 2017 Acta Materialia Inc.

Understanding the mechanism of martensitic transformation is of great importance in developing advanced high strength steels, especially TRansformation-Induced Plasticity (TRIP) steels. The TRIP effect leads to enhanced work-hardening rate, postponed onset of necking and excellent formability. In-situ transmission electron microscopy has been performed to systematically investigate the dynamic interactions between dislocations and α′ martensite at microscale. Local stress concentrations, e.g. from notches or dislocation pile-ups, render free edges and grain boundaries favorable nucleation sites for α′ martensite. Its growth leads to partial dislocation emission on two independent slip planes from the hetero-interface when the austenite matrix is initially free of dislocations. The kinematic analysis reveals that activating slip systems on two independent {111} planes of austenite are necessary in accommodating the interfacial mismatch strain. Full dislocation emission is generally observed inside of austenite regions that contain high density of dislocations. In both situations, phase boundary propagation generates large amounts of dislocations entering into the matrix, which renders the total deformation compatible and provide substantial strain hardening of the host phase. These moving dislocation sources enable plastic relaxation and prevent local damage accumulation by intense slipping on the softer side of the interfacial region. Thus, finely dispersed martensite distribution renders plastic deformation more uniform throughout the austenitic matrix, which explains the exceptional combination of strength and ductility of TRIP steels. © 2017 Elsevier B.V.

Nanophase segregation of a bicomponent thiol self-assembled monolayer is predicted using atomistic molecular dynamics simulations and experimentally confirmed. The simulations suggest the formation of domains rich in acid-terminated chains, on one hand, and of domains rich in amide-functionalized ethylene glycol oligomers, on the other hand. In particular, within the amide-ethylene glycol oligomers region, a key role is played by the formation of interchain hydrogen bonds. The predicted phase segregation is experimentally confirmed by the synthesis of 35 and 15 nm gold nanoparticles functionalized with several binary mixtures of ligands. An extensive study by transmission electron microscopy and electron tomography, using silica selective heterogeneous nucleation on acid-rich domains to provide electron contrast, supports simulations and highlights patchy nanoparticles with a trend toward Janus nano-objects depending on the nature of the ligands and the particle size. These results validate our computational platform as an effective tool to predict nanophase separation in organic mixtures on a surface and drive further exploration of advanced nanoparticle functionalization. © 2017 American Chemical Society.

In this work faceted voids are studied which were induced by solid state dewetting at 600 °C of tetracrystalline Al thin films covered with a native oxide layer. Hexagonally shaped voids are observed in a few locations where Al is uniformly redistributed to the surrounding thin film. Although faceted, the majority of the voids exhibit irregular shapes caused by pinning of distinct sides of the retracting Al thin film. The two different Al|void shapes (hexagonal or irregular) are investigated by site-specific cross-sectional transmission electron microscopy (TEM) analysis. The TEM studies reveal Al|void regions with and without rims and ridges. The presence of rims and ridges is explained by a discontinuous void formation process caused by pinning of the retracting Al film. During annealing, crystallization and a thickness increase of the surface oxide, which is still continuously covering the Al thin film as well as the void, occurs. The surface scale undergoes a phase transformation from the amorphous state to γ-Al2O3, which is confirmed locally on the nanometer scale using scanning TEM techniques including electron energy loss near-edge structure investigations. Spherical aberration corrected atomic column resolved scanning TEM revealed a cube-on-cube orientation relationship between the Al thin film and the γ-Al2O3 surface oxide. © 2017 Acta Materialia Inc.

Planar defects, such as stacking faults and twins, are the most common defects in III-V semiconductor nanowires. Here we report on the effect of surface perturbation caused by twin planes on surface optical (SO) phonon modes. Self-catalyzed GaAs nanowires with varying planar defect density were grown by molecular beam epitaxy and investigated by Raman spectroscopy and transmission electron microscopy (TEM). SO phonon peaks have been detected, and the corresponding spatial period along the nanowire axis were measured to be 1.47 μm (±0.47 μm) and 446 nm (±35 nm) for wires with twin densities of about 0.6 (±0.2) and 2.2 (±0.18) per micron. For the wires with extremely high density of twins, no SO phonon peaks were detected. TEM analysis of the wires reveal that the average distance between the defects are in good agreement with the SO phonon spatial period determined by Raman spectroscopy. © 2017 Author(s).

The present work describes the shear creep behavior of the superalloy LEK 94 at temperatures between 980 and 1050 °C and shear stresses between 50 and 140 MPa for loading on the macroscopic crystallographic shear system (MCSS) (011) . The strain rate versus strain curves show short primary and extended secondary creep regimes. We find an apparent activation energy for creep of Q app = 466 kJ/mol and a Norton-law stress exponent of n = 6. With scanning transmission electron microscopy, we characterize three material states that differ in temperature, applied stress, and accumulated strain/time. Rafting develops perpendicular to the maximum principal stress direction, γ channels fill with dislocations, superdislocations cut γ′ particles, and dislocation networks form at γ/γ′ interfaces. Our findings are in agreement with previous results for higherature and low-stress [001] and [110] tensile creep testing, and for shear creep testing of the superalloys CMSX-4 and CMSX-6 on the MCSSs (111) and (001)[100]. The parameters that characterize the evolving γ/γ′ microstructure and the evolving dislocation substructures depend on creep temperature, stress, strain, and time. © 2017 Materials Research Society.

Atom probe tomography and transmission electron microscopy are used to study the formation of nano-sized Cu-Sn-Se particles in Cu2ZnSnSe4 thin-films. For a Cu-rich precursor, which was deposited at 320 °C under Cu- and Zn-rich growth conditions, Cu2-xSe grains at the surface are detected. During annealing the precursor at 500 °C in a SnSe + Se atmosphere most of the Cu2-xSe is transformed to Cu2ZnSnSe4 via the consumption of excessive ZnSe and incorporation of Sn. However, atom probe tomography studies also reveal the formation of various nanometer-sized Cu-Sn-Se particles close to the CdS/Cu2ZnSnSe4 interface. One of those particles has a composition close to the Cu2SnSe3 compound. This phase has a smaller band gap than Cu2ZnSnSe4 and is proposed to lead to a significant drop in the open-circuit voltage and could be the main cause for a detrimental p-n junction and the zero efficiency of the final device. Possible effects of the other phases on solar cell performance and formation mechanisms are discussed as well. © 2017 Acta Materialia Inc.

At low homologous temperatures (down to cryogenic temperatures), the CrMnFeCoNi high-entropy alloy possesses good combination of strength, work hardening rate (WHR), ductility, and fracture toughness. To improve understanding of the deformation mechanisms responsible for its mechanical properties, tensile tests were performed at liquid nitrogen and room temperature (77 K and 293 K) and interrupted at different strains to quantify the evolution of microstructure by transmission electron microscopy. Dislocation densities, and twin widths, their spacings, and volume fractions were determined. Nanotwins were first observed after true strains of ∼7.4% at 77 K and ∼25% at 293 K; at lower strains, deformation occurs by dislocation plasticity. The tensile stress at which twinning occurs is 720 ± 30 MPa, roughly independent of temperature, from which we deduce a critical resolved shear stress for twinning of 235 ± 10 MPa. In the regime where deformation occurs by dislocation plasticity, the shear modulus normalized WHR decreases with increasing strain at both 77 K and 293 K. Beyond ∼7.4% true strain, the WHR at 77 K remains constant at a high value of G/30 because twinning is activated, which progressively introduces new interfaces in the microstructure. In contrast, the WHR at room temperature continues to decrease with increasing strain because twinning is not activated until much later (close to fracture). Thus, the enhanced strength-ductility combination at 77 K compared to 293 K is primarily due to twinning starting earlier in the deformation process and providing additional work hardening. Consistent with this, when tensile specimens were pre-strained at 77 K to introduce nanotwins, and subsequently tested at 293 K, flow stress and ductility both increased compared to specimens that were not pre-strained. © 2016 Acta Materialia Inc.

In the present work, we use a miniature test procedure to investigate the tensile creep behaviour of the single crystal superalloy ERBO1. We test precisely oriented [0 0 1], [1 1 0] and [1 1 1] creep specimens and determine the stress and the temperature dependence of characteristic creep rates in limited stress and temperature regimes, where the stress and temperature dependence of characteristic creep rates can be well described by power law and Arrhenius type of relations, with stress exponents n and apparent activation energies Qapp. n-values increase with stress and decrease with temperature. Qapp-values, on the other hand, increase with increasing temperature and decrease with increasing stress. Creep curve shapes gradually evolve from the high temperature low stress to the low temperature high stress (LTHS) regime. This implies that there is a gradual change in elementary deformation and softening mechanisms, which is qualitatively confirmed using transmission electron microscopy. While at high temperatures different loading directions only have a moderate influence on creep, there is a very strong effect of loading direction at low temperatures. The [1 1 0] tests show the fastest deformation rates and the shortest rupture times. In the LTHS creep regime, we confirm the double minimum (DM) type of creep behaviour, which was previously reported but never explained. Further work is required to rationalise DM-creep. The implications of this type of creep behaviour on scatter and on extrapolation of creep data is discussed in the light of previous results published in the literature. © 2016 Informa UK Limited, trading as Taylor & Francis Group.

For multicomponent near-β alloys, we have investigated the mechanisms responsible for the β-to-ω and ω-to-α phase transformations upon isothermal ageing at 573 K. Experimental evidence from atom probe tomography and aberration-corrected high-resolution transmission electron microscopy indicates that the formation of isothermal ω involves a structural reconstruction assisted by nanoscale spinodal decomposition of the β matrix, prior to the specific chemistry change required to form ω, rather than a mixed-mode process with structure and chemistry changes occurring simultaneously as has been previously suggested. First, incommensurate embryonic ω evolve via a displacive mechanism within Mo-lean regions created by second-order coherent spinodal decomposition of the β matrix. The subtle spinodal decomposition in β and chemistry of embryonic ω are carefully analysed by an advanced atom probe data analysis algorithm. When the size of embryonic É·exceeds a critical value, commensurate isothermal É·forms through the exit of the other alloying solutes. O-rich regions present at the isothermal ω/β interface provide potent sites for the formation of α. The concurrent compositional partitioning of solutes in É·and α indicates the transformation from ω to α involves both a rapid lattice reconstruction at the ω/α interface and a slow Al diffusion at the α/β, therefore a mixed-mode displacive-diffusive process. This study provides novel experimental evidence to understand the much-disputed transformation processes and elucidate the mechanisms responsible for these important phase transformations. © 2015 Acta Materialia Inc.

Metal-organic frameworks (MOFs) feature a great possibility for a broad spectrum of applications. Hollow MOF structures with tunable porosity and multifunctionality at the nanoscale with beneficial properties are desired as hosts for catalytically active species. Herein, we demonstrate the formation of well-defined hollow Zn/Co-based zeolitic imidazolate frameworks (ZIFs) by use of epitaxial growth of Zn-MOF (ZIF-8) on preformed Co-MOF (ZIF-67) nanocrystals that involve in situ self-sacrifice/excavation of the Co-MOF. Moreover, any type of metal nanoparticles can be accommodated in Zn/Co-ZIF shells to generate yolk-shell metal@ZIF structures. Transmission electron microscopy and tomography studies revealed the inclusion of these nanoparticles within hollow Zn/Co-ZIF with dominance of the Zn-MOF as shell. Our findings lead to a generalization of such hollow systems that are working effectively to other types of ZIFs. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

The formation of silicate nanoaggregates (NAs) at the very early stages of precursor sols and zeolite beta crystallization from silicate nanoparticles (NPs) are investigated in detail using a combination of different analysis methods, including liquid-state29Si,27Al,14N, and1H NMR spectroscopy, mass spectrometry (MS), small-angle X-ray scattering (SAXS), X-ray diffraction (XRD), and transmission electron microscopy at cryogenic temperatures (cryo-TEM). Prior to hydrothermal treatment, silicate NAs are observed if the Si/OH ratio in the reaction mixture is greater than 1. Condensation of oligomers within the NAs then generates NPs. Aluminum doped into the synthesis mixtures is located exclusively in the NPs, and is found exclusively in a state that is fourfold connected to silicate, favoring their condensation and aggregation. These results are in agreement with general trends observed for other systems. Silicate NAs are essential intermediates for zeolite formation and are generated by the aggregation of hydrated oligomers, aluminate, and templating cations. Subsequent further intra-nanoaggregate silicate condensation results in the formation of NPs.1H and14N liquid NMR as well as diffusion ordered spectroscopy (DOSY) experiments provide evidence for weakly restricted rotational and translational mobility of the organic template within NAs as a consequence of specific silicate–template interactions. NAs thus appear as key species in clear sols, and their presence in the precursor sol favors silicate condensation and further crystallization, promoted either by increasing the Si/OH ratio or by heating. © 2016 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim

Nucleation of soft magnetic Fe3Si nanocrystals in Cu-free Fe74.5Si15.5Nb3B7 alloy, upon rapid (10 s) and conventional (30 min) annealing, was investigated using x-ray diffraction, transmission electron microscopy, Mössbauer spectroscopy, and atom probe tomography. By employing rapid annealing, preferential nucleation of Fe3Si nanocrystals was achieved, whereas otherwise there is simultaneous nucleation of both Fe3Si and undesired Fe-B compound phases. Analysis revealed that the enhanced Nb diffusivity, achieved during rapid annealing, facilitates homogeneous nucleation of Fe3Si nanocrystals while shifting the secondary Fe-B crystallization to higher temperatures resulting in pure soft magnetic nanocrystallization with very low coercivities of ∼10 A/m. © 2016 AIP Publishing LLC.

We have investigated the autonomous repair of creep damage by site-selective precipitation in a binary Fe-Mo alloy (6.2 wt pct Mo) during constant-stress creep tests at temperatures of 813 K, 823 K, and 838 K (540 °C, 550 °C, and 565 °C). Scanning electron microscopy studies on the morphology of the creep-failed samples reveal irregularly formed deposits that show a close spatial correlation with the creep cavities, indicating the filling of creep cavities at grain boundaries by precipitation of the Fe2Mo Laves phase. Complementary transmission electron microscopy and atom probe tomography have been used to characterize the precipitation mechanism and the segregation at grain boundaries in detail. © 2016, The Author(s).

Mo2BC nanocrystalline coatings were deposited on Cu substrates to compare their mechanical performance with bench-mark TiAlN, and pure Mo, Al and Al2O3 reference coatings. The Mo2BC coatings were characterized by X-ray diffraction and transmission electron microscopy to analyze the microstructure. In order to study the damage behavior, the coatings were subjected to uniaxial tensile loading and the crack spacing with increasing strain was monitored using optical and scanning electron microscopy. Based on crack density measurements, the Mo2BC coatings were found to be significantly less prone to cracking than the bench-mark TiAlN coatings. The higher resistance to cracking arises from the electronic structure of the Mo2BC nanolaminates, which imparts moderate ductility to the deformation behavior. © 2016 Elsevier B.V.

We benchmarked growth, microstructure and photo luminescence (PL) of (112-2) InGaN quantum wells (QWs) against (0001) and (112-0). In incorporation, growth rate and the critical thickness of (112-2) QWs are slightly lower than (0001) QWs, while the In incorporation on (112-0) is reduced by a factor of three. A small step-bunching causes slight fluctuations of the emission wavelength. Transmission electron microscopy as well as atom probe tomography (APT) found very flat interfaces with little In segregation even for 20% In content. APT frequency distribution analysis revealed some deviation from a random InGaN alloy, but not as severe as for (112-0). The slight deviation of (112-2) QWs from an ideal random alloy did not broaden the 300 K PL, the line widths were similar for (112-2) and (0001) while (112-0) QWs were broader. Despite the high structural quality and narrow PL, the integrated PL signal at 300 K was about 4 lower on (112-2) and more than 10 lower on (112-0). © 2016 IOP Publishing Ltd.

Low temperature (750°C) and high stress (800 MPa) creep curves of single crystal superalloy ERBO/1 tensile specimens loaded in the (001) direction show two creep rate minima. Strain rates decrease towards a first sharp local creep rate minimum at 0.1% strain (reached after 30 min). Then deformation rates increase and reach an intermediate maximum at 1% (reached after 1.5 h). Subsequently, strain rates decrease towards a global minimum at 5% (260 h), before tertiary creep (not considered in the present work) leads to final rupture. We combine high resolution miniature creep testing with diffraction contrast transmission electron microscopy and identify elementary processes which govern this double-minimum type of creep behavior. We provide new quantitative information on the evolution of microstructure during low temperature and high stress creep, focusing on γ-channel dislocation activity and stacking fault shear of the γ′-phase. We discuss our results in the light of previous work published in the literature and highlight areas in need of further work. © 2016 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Dry reforming of methane (DRM) has been studied for many years as an attractive option to produce synthesis gas. However, catalyst deactivation by coking over nonprecious-metal catalysts still remains unresolved. Here, we study the influence of structural and compositional properties of nickel catalysts on the catalytic performance and coking propensity in the DRM. A series of bulk catalysts with different Ni contents was synthesized by calcination of hydrotalcite-like precursors NixMg0.67-xAl0.33(OH)2(CO3)0.17·mH2O prepared by constant-pH coprecipitation. The obtained Ni/MgAl oxide catalysts contain Ni nanoparticles with diameters between 7 and 20 nm. High-resolution transmission electron microscopy (HR-TEM) revealed a nickel aluminate overgrowth on the Ni particles, which could be confirmed by Fourier transform infrared (FTIR) spectroscopy. In particular, catalysts with low Ni contents (5 mol %) exhibit predominantly oxidic surfaces dominated by Ni2+ and additionally some isolated Ni0 sites. These properties, which are determined by the overgrowth, effectively diminish the formation of coke during the DRM, while the activity is preserved. A large (TEM) and dynamic (microcalorimetry) metallic Ni surface at high Ni contents (50 mol %) causes significant coke formation during the DRM. © 2016 American Chemical Society.

Nanostructured niobium oxides and hydroxides are potential candidates for photochemical applications due to their excellent optical and electronic properties. In the present work the thermal stability of Nb3O7(OH) superstructures prepared by a simple hydrothermal approach is investigated at the atomic scale. Transmission electron microscopy and electron energy-loss spectroscopy provide insights into the phase transformation occurring at elevated temperatures and probe the effect of the atmospheric conditions. In the presence of oxygen, H2O is released from the crystal at temperatures above 500 °C, and the crystallographic structure changes to H-Nb2O5. In addition to the high thermal stability of Nb3O7(OH), the morphology was found to be stable, and first changes in the form of a merging of nanowires are not observed until 850 °C. Under reducing conditions in a transmission electron microscope and during electron beam bombardment, an oxygen-deficient phase is formed at temperatures above 750 °C. This transformation starts with the formation of defects in the crystal lattice at 450 °C and goes along with the formation of pores in the nanowires which accommodate the volume differences of the two crystal phases. © 2016 American Chemical Society.

The multi-scale complexity of lath martensitic microstructures requires scale-bridging analyses to better understand the deformation mechanisms activated therein. In this study, plasticity in lath martensite is investigated by multi-field mapping of deformation-induced microstructure, topography, and strain evolution at different spatial resolution vs. field-of-view combinations. These investigations reveal site-specific initiation of dislocation activity within laths, as well as significant plastic accommodation in the vicinity of high angle block and packet boundaries. The observation of interface plasticity raises several questions regarding the role of thin inter-lath austenite films. Thus, accompanying transmission electron microscopy and synchrotron x-ray diffraction experiments are carried out to investigate the stability of these films to mechanical loading, and to discuss alternative boundary sliding mechanisms to explain the observed interface strain localization. © 2016 Acta Materialia Inc.

To identify the conditions under which ω assists α formation in a near-β Ti alloy, we employed transmission electron microscopy and atom probe tomography to study α precipitation in alloys designed to contain two different types of ω. Coherent incommensurate embryonic ω formed upon isothermal ageing, does not directly assist α precipitation. When this incommensurate embryonic ω grows to a critical size, it transforms into commensurate isothermal ω, during which stress is thought to be the dominant factor. Regions of O enrichment at the semi-coherent isothermal ω/β interfaces are observed, which is thought to promote α formation. © 2016 Elsevier Ltd. All rights reserved.

{332} twinning, an unusual twinning mode in other body-centered cubic (bcc) metals and alloys, has been demonstrated to be a fundamental deformation mode in bcc metastable β titanium alloys. Recent studies suggest that this twinning mode plays an important role in enhancing the work hardening and thus improving the mechanical properties. Here, we studied the mechanism of this twinning mode in a metastable β Ti-36Nb-2Ta-3Zr (wt.%) alloy. Tensile tests were performed to induce the formation of {332} twins. By using electron backscatter diffraction, transmission electron microscopy and in situ scanning electron microscopy, the surface-to-bulk microstructures and the initiation and propagation of {332} twins were investigated. In addition to the previously reported high densities of straight dislocations within the twin, we have observed that an α″ martensite band is present near the surface adjacent to the twin. During annealing at 900°C, the α″ martensite band transforms into the adjacent twin rather than into the matrix, indicating that {332} twin nucleates within α″ martensite. Further evidence for this is the constitution of the twin in the initial stage of its formation, where the first portion formed consists of α″ martensite. During propagation, the twins propagating to the opposite directions can merge together when their lateral boundaries impinge on each other. Based on the experimental observations, an α″-assisted twinning mechanism is proposed and the origin of the dislocations within {332} twin is discussed accordingly. © 2016 Published by Elsevier Ltd on behalf of Acta Materialia Inc.

We present a systematic atomic scale analysis of the structural evolution of long-period-stacking-ordered (LPSO) structures in the (i) α-Mg matrix and in the (ii) interdendritic LPSO phase of an Mg97Y2Zn1 (at. %) alloy annealed at 500°C, using high resolution high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM). Various types of metastable LPSO building block clusters have been observed in both regions. The thermodynamic phase stabilities computed by density-functional-theory calculations explain the diversity of the LPSO structures which are distinguished by their different arrangements of the Y/Zn enriched LPSO building blocks that have a local fcc stacking sequence on the close packed planes. A direct evidence of the transformation from 18R to 14H is presented. This finding suggests that LPSO structures can change their separation distance - quantified by the number of α-Mg layers between them - at a low energy penalty by generating the necessary Shockley partial dislocation on a specific glide plane. Based on our results the most probable transformation sequence of LPSO precipitate plates in the α-Mg matrix is: single building block → various metastable LPSO building block clusters → 14H, and the most probable transformation sequence in the interdendritic LPSO phase is: 18R→ various metastable LPSO building block clusters → 14H. The thermodynamically most stable structures in both the α-Mg matrix and the interdendritic LPSO phase are a mixture of 14H and α-Mg. © 2016 Acta Materialia Inc.

The strain hardening mechanism of a high-Mn lightweight steel (Fe-30.4Mn-8Al-1.2C (wt%)) is investigated by electron channeling contrast imaging (ECCI) and transmission electron microscopy (TEM). The alloy is characterized by a constant high strain hardening rate accompanied by high strength and high ductility (ultimate tensile strength: 900 MPa, elongation to fracture: 68%). Deformation microstructures at different strain levels are studied in order to reveal and quantify the governing structural parameters at micro- and nanometer scales. As the material deforms mainly by planar dislocation slip causing the formation of slip bands, we quantitatively study the evolution of the slip band spacing during straining. The flow stress is calculated from the slip band spacing on the basis of the passing stress. The good agreement between the calculated values and the tensile test data shows dynamic slip band refinement as the main strain hardening mechanism, enabling the excellent mechanical properties. This novel strain hardening mechanism is based on the passing stress acting between co-planar slip bands in contrast to earlier attempts to explain the strain hardening in high-Mn lightweight steels that are based on grain subdivision by microbands. We discuss in detail the formation of the finely distributed slip bands and the gradual reduction of the spacing between them, leading to constantly high strain hardening. TEM investigations of the precipitation state in the as-quenched state show finely dispersed atomically ordered clusters (size < 2 nm). The influence of these zones on planar slip is discussed. © 2016 Acta Materialia Inc.

In situ neutron diffraction, transmission electron microscopy (TEM) and atom probe tomography (APT) have been used to study the early stages of bainite transformation in a 2 mass% Si nano-bainitic steel. It was observed that carbon redistribution between the bainitic ferrite and retained austenite at the early stages of the bainite transformation at low isothermal holding occurred in the following sequence: (i) formation of bainitic ferrite nuclei within carbon-depleted regions immediately after the beginning of isothermal treatment; (ii) carbon partitioning immediately after the formation of bainitic ferrite nuclei but substantial carbon diffusion only after 33 min of bainite isothermal holding; (iii) formation of the carbon-enriched remaining austenite in the vicinity of bainitic laths at the beginning of the transformation; (iv) segregation of carbon to the dislocations near the austenite/ferrite interface; and (v) homogeneous redistribution of carbon within the remaining austenite with the progress of the transformation and with the formation of bainitic ferrite colonies. Bainitic ferrite nucleated at internal defects or bainite/austenite interfaces as well as at the prior austenite grain boundary. Bainitic ferrite has been observed in the form of an individual layer, a colony of layers and a layer with sideplates at the early stages of transformation. © 2016 International Union of Crystallography.

The (1 1 1)-layered perovskite material Ba5Ta4O15 represents a suitable photoabsorber with remarkable photocatalytic activity in overall water splitting. We are the first to demonstrate overall water splitting without the presence of a noble-metal-based co-catalyst over this catalyst. The photocatalytic activity of Ba5Ta4O15 was investigated by overall water splitting after reductive photodeposition of amorphous Cr2O3. The formation of Cr2O3 nanoparticles for water splitting was evidenced by X-ray photoelectron spectroscopy and transmission electron microscopy. The reductive photodeposition of very low amounts of Cr2O3 on Ba5Ta4O15 induces stable rates in overall water splitting up to 465 μmol h-1 H2 and 228 μmol h-1 O2. © 2016 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

The application of small-angle X-ray scattering (SAXS) to whole Escherichia coli cells is challenging owing to the variety of internal constituents. To resolve their contributions, the outer shape was captured by ultra-small-angle X-ray scattering and combined with the internal structure resolved by SAXS. Building on these data, a model for the major structural components of E. coli was developed. It was possible to deduce information on the occupied volume, occurrence and average size of the most important intracellular constituents: ribosomes, DNA and proteins. E. coli was studied after treatment with three different antibiotic agents (chloramphenicol, tetracycline and rifampicin) and the impact on the intracellular constituents was monitored. A combination of small- and ultra-small-angle X-ray scattering enabled the resolution of important intracellular constituents in Escherichia coli (ribosomes, DNA and proteins). The impact of treatment with three antibiotic agents was monitored. © A. R. von Gundlach et al. 2016.

Among the vast number of multi-principal-element alloys that are referred to as high-entropy alloys (HEAs) in the literature, only a limited number solidify as single-phase solid solutions. The equiatomic HEA, CrMnFeCoNi, is a face-centered cubic (FCC) prototype of this class and has attracted much attention recently because of its interesting mechanical properties. Here we evaluate its phase stability after very long anneals of 500 days at 500-900 °C during which it is reasonable to expect thermodynamic equilibrium to have been established. Microstructural analyses were performed using complementary analysis techniques including scanning and transmission electron microscopy (SEM/TEM/STEM), energy dispersive X-ray (EDX) spectroscopy, selected area electron diffraction (SAD), and atom probe tomography (APT). We show that the alloy is a single-phase solid solution after homogenization for 2 days at 1200 °C and remains in this state after a subsequent anneal at 900 °C for 500 days. However, it is unstable and forms second-phase precipitates at 700 and 500 °C. A Cr-rich σ phase forms at 700 °C, whereas three different phases (L10-NiMn, B2-FeCo and a Cr-rich body-centered cubic, BCC, phase) precipitate at 500 °C. These precipitates are located mostly at grain boundaries, but also form at intragranular inclusions/pores, indicative of heterogeneous nucleation. Since there is limited entropic stabilization of the solid solution state even in the extensively investigated CrMnFeCoNi alloy, the stability of other HEAs currently thought to be solid solutions should be carefully evaluated, especially if they are being considered for applications in vulnerable temperature ranges. © 2016 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Combining advantages of homogeneous and heterogeneous catalysis by incorporating active species on a solid support is often an effective strategy for improving overall catalyst performance, although the influences of the support are generally challenging to establish, especially at a molecular level. Here, we report the local compositions, and structures of platinum species incorporated into covalent triazine framework (Pt-CTF) materials, a solid analogue of the molecular Periana catalyst, Pt(bpym)Cl2, both of which are active for the selective oxidation of methane in the presence of concentrated sulfuric acid. By using a combination of solid-state 195Pt nuclear magnetic resonance (NMR) spectroscopy, aberration-corrected scanning transmission electron microscopy (AC-STEM), X-ray photoelectron spectroscopy (XPS), and X-ray absorption spectroscopy (XAS), important similarities and differences are observed between the Pt-CTF and Periana catalysts, which are likely related to their respective macroscopic reaction properties. In particular, wide-line solid-state 195Pt NMR spectra enable direct measurement, identification, and quantification of distinct platinum species in as-synthesized and used Pt-CTF catalysts. The results indicate that locally ordered and disordered Pt sites are present in as-synthesized Pt-CTF, with the former being similar to one of the two crystallographically distinct Pt sites in crystalline Pt(bpym)Cl2. A distribution of relatively disordered Pt moieties is also present in the used catalyst, among which are the principal active sites. Similarly XAS shows good agreement between the measured data of Pt-CTF and a theoretical model based on Pt(bpym)Cl2. Analyses of the absorption spectra of Pt-CTF used for methane oxidation suggests ligand exchange, as predicted for the molecular catalyst. XPS analyses of Pt(bpym)Cl2, Pt-CTF, as well as the unmodified ligands, further corroborate platinum coordination by pyridinic N atoms. Aberration-corrected high-angle annular dark-field STEM proves that Pt atoms are distributed within Pt-CTF before and after catalysis. The overall results establish the close similarities of Pt-CTF and the molecular Periana catalyst Pt(bpym)Cl2, along with differences that account for their respective properties. (Figure Presented). © 2016 American Chemical Society.

Besides the high spatial resolution achieved in aberration-corrected scanning transmission microscopy, beam-induced dynamic effects have to be considered for quantitative chemical characterization on the level of single atomic columns. The present study investigates the influence of imaging conditions in an aberration-corrected scanning transmission electron microscope on the beam-induced atomic migration at a complex Ag-segregated, nanofaceted Cu grain boundary. Three distinct imaging conditions including static single image and serial image acquisition have been utilized. Chemical information on the Ag column occupation of single atomic columns at the grain boundary was extracted by the evolution of peak intensity ratios and compared to idealized scanning transmission electron microscopy image simulations. The atomic column occupation is underestimated when using conventional single frame acquisition due to an averaging of Ag atomic migration events during acquisition. Possible migration paths for the beam-induced atomic motion at a complex Cu grain boundary are presented. Copyright © Materials Research Society 2016

Fe-Si-B-Nb-Cu alloys are attractive for high frequency applications due to their low coercivity and high saturation magnetization. Here, we study the effect of stress annealing on magnetic microstructure in Fe73.5Si15.5B7Nb3Cu1 using off-axis electron holography and the Fresnel mode of Lorentz transmission electron microscopy. A stress of 50 MPa was applied to selected samples during rapid annealing for 4 s, resulting in uniaxial anisotropy perpendicular to the stress direction. The examination of focused ion beam milled lamellae prepared from each sample revealed a random magnetic domain pattern in the sample that had been rapidly annealed in the absence of stress, whereas a highly regular domain pattern was observed in the stress-annealed sample. We also measured a decrease in domain wall width from ∼ 94 nm in the sample annealed without stress to ∼ 80 nm in the stress-annealed sample. © 2016 Author(s).

Abstract We study the effects of different heat treatment routes on microstructure engineering and the resulting mechanical response in a plain binary Ti-4Mo (wt%) model alloy. We observe a broad variety of microstructure formation mechanisms including diffusion driven allotropic phase transformations as well as shear and/or diffusion dominated modes of martensitic transformations, enabling a wealth of effective microstructure design options even in such a simple binary Ti alloy. This wide variety of microstructures allows tailoring the mechanical properties ranging from low yield strength (350 MPa) and high ductility (30-35% tensile elongation) to very high yield strength (1100 MPa) and medium ductility (10-15% tensile elongation) as well as a variety of intermediate states. Mechanical testing and microstructure characterization using optical microscopy, scanning electron microscopy based techniques, transmission electron microscopy and atom probe tomography were performed revealing that minor variations in the heat treatment cause significant changes in the resulting microstructures (e.g. structural refinement, transition between diffusive and martensitic transformations). The experimental results on microstructure evolution during the applied different heat treatment routes are discussed with respect to the mechanical properties. © 2015 Acta Materialia Inc.

Cold-worked alloys exhibit high strength, but suffer from limited ductility. In contrast, Ti-based gum metal was reported to exhibit high strength combined with good ductility upon severe pre-straining. Motivated by this anomaly, we systematically studied the evolution of gum metal microstructure during severe cold working (swaging and rolling) and the resulting deformation and damage micro-mechanical mechanisms during follow-up tensile deformation. To this end, various experimental in situ and post-mortem methodologies are employed, including scanning electron microscopy imaging, high-resolution electron backscatter diffraction mapping and transmission electron microscopy. These observations reveal that intense grain refinement takes place through dislocation plasticity-dominated deformation banding upon cold working. The observed enhancement in crack blunting and failure resistance which prolongs the post-necking ductility of gum metal during follow-up tensile straining can be attributed to the deformation-induced development of local heterogeneities in texture and grain size. © 2015 Springer Science+Business Media New York

Alloys based on the titanium-tantalum system are considered for application as high-temperature shape memory alloys due to their martensite start temperatures, which can surpass 200 °C. In the present work we study the evolution of microstructure and the influence of creep on the phase transformation behavior of a Ti70Ta30 (at.%) high-temperature shape memory alloy. Creep tests were performed in a temperature range from 470 to 530 °C at stresses between 90 and 150 MPa. The activation energy for creep was found to be 307 kJ mol-1 and the stress exponent n was determined as 3.7. Scanning and transmission electron microscopy investigations were carried out to characterize the microstructure before and after creep. It was found that the microstructural evolution during creep suppresses subsequent martensitic phase transformations. © Carl Hanser Verlag GmbH & Co. KG.

Uniform Au nanoparticles (∼2 nm) with narrow size-distribution (standard deviation: 0.5-0.6 nm) supported on both hydroxylated (Fe-OH) and dehydrated iron oxide (Fe-O) have been prepared by either deposition-precipitation (DP) or colloidal-deposition (CD) methods. Different structural and textural characterizations were applied to the dried, calcined and used gold-iron oxide samples. Transmission electron microscopy (TEM) and high-resolution TEM (HRTEM) showed high homogeneity in the supported Au nanoparticles. The ex situ and in situ X-ray absorption fine structure (XAFS) characterization monitored the electronic and short-range local structure of active gold species. The synchrotron-based in situ X-ray diffraction (XRD), together with the corresponding temperature-programmed reduction by hydrogen (H2-TPR), indicated a structural evolution of the iron-oxide supports, correlating to their reducibility. An inverse order of catalytic activity between DP (Au/Fe-OH < Au/Fe-O) and CD (Au/Fe-OH > Au/Fe-O) was observed. Effective gold-support interaction results in a high activity for gold nanoparticles, locally generated by the sintering of dispersed Au atoms on the oxide support in the DP synthesis, while a hydroxylated surface favors the reactivity of externally introduced Au nanoparticles on Fe-OH support for the CD approach. This work reveals why differences in the synthetic protocol translate to differences in the catalytic performance of Au/FeOx catalysts with very similar structural characteristics in CO oxidation. © The Royal Society of Chemistry 2015.

Partitioning of alloying elements during the ω-to-α phase transformation in a near-β alloy after isothermal ageing at 573 K was measured using atom probe tomography and high-resolution transmission electron microscopy. O-rich regions associated with ω precipitates were observed for the first time, and likely serve as nucleation sites for the α phase. The partitioning behaviours of Al and O, unlike other elements, are different for α and ω, suggesting a mixed-mode mechanism for the ω-to-α phase transformation. © 2015 Acta Materialia Inc.

We provide a comprehensive durability assessment dedicated to a promising class of electrocatalysts for the oxygen reduction reaction (i.e., porous platinum nanoparticles). The stability of these nanoengineered open structures is tested under two accelerated degradation test conditions (ADT), particularly selected to mimic the potential regimes experienced by the catalyst during the operative life of a fuel cell (i.e., load cycles (up to 1.0 VRHE) and start-up cycles (up to 1.4 VRHE)). To understand the evolution of the electrochemical performance, the catalyst properties are investigated by means of fundamental rotating disc electrode studies, identical location-transmission electron microscopy (IL-TEM) coupled with electron energy loss spectroscopy chemical mapping (IL-EELS), and post-use chemical analysis and online highly sensitive potential resolved dissolution concentration monitoring by scanning flow cell inductively coupled plasma-mass spectrometry (SFC-ICP-MS). The experimental results on the nanoporous Pt revealed distinctive degradation mechanisms that could potentially affect a wide range of other nanoengineered open structures. The study concludes that, although providing promising activity performance, under the relevant operational conditions of fuel cells, the nanoporosity is only metastable and subjected to a progressive reorganization toward the minimization of the nanoscale curvature. The rate and pathways of this specific degradation mechanism together with other well-known degradation mechanisms like carbon corrosion and platinum dissolution are strongly dependent on the selected upper limit potential, leading to distinctly different durability performance. © 2015 American Chemical Society.

Abstract Bulk and micro-pillar single crystals were used to investigate the twinning-induced plasticity mechanism in austenitic Fe-22 wt%Mn-0.6 wt%C TWIP steel. Compression of micro-pillars oriented either for deformation-induced twinning or for perfect dislocation glide was carried out for pillars with diameters in the range of 600 nm to 4 μm. The same size dependence of the critical resolved shear stress was observed for both orientations. The critical micro-pillar diameter for size-independent plasticity was approximately 7.6 μm. Partial dislocation-mediated formation of twins and ε-martensite was observed in micro-pillars oriented for twinning by transmission electron microscopy. The elastic-plastic transition in micro-pillars oriented for deformation twinning did not involve twinning, and dislocation-dislocation interactions were a necessary precondition for twin formation. © 2015 Acta Materialia Inc.

Abstract We report on partitioning of alloying elements during the formation of fine intragranular α plates in a Ti-55521 alloy after thermo-mechanical processing (TMP) and isothermal ageing at 923 K. The microstructures were characterised using atom probe tomography and high-resolution transmission electron microscopy. The partitioning of Mo, V and Al are strongly affected by their diffusivities and their mutual interaction. This leads to a deviation of the measured contents of alloying elements in the two phases from the predicted equilibrium values. The alloying elements at the broad faces and tips of α plates were found to exhibit different pile-up and segregation behaviours, which is thought to affect the lengthening and thickening kinetics of the α plates. As a result, the aspect ratio of α plates decreased rapidly with increasing ageing time. This study suggests that careful selection of alloying elements could be an effective way in controlling the growth anisotropy of α plates and thus α + β microstructures in near-β Ti alloys. © 2015 Elsevier B.V. All rights reserved.

Functionalization of graphene is fundamental to facilitating its processing and offers a wide scope for advanced applications. Here we demonstrate a facile, highly efficient and mild covalent functionalization of graphene using HNO3 vapour. This results in functionalized few-layer graphene (FLG) that is high in both quantity and quality. We fully characterized the structure and defect level of functionalized FLG by X-ray photoelectron spectroscopy, high-resolution transmission electron microscopy and Raman spectroscopy. The results from this analysis show the tunability of the surface oxygen functionalities of FLG achieved through controlling the oxidation temperature without affecting the major intrinsic properties of graphene. This allows for further doping for applications, for example with nitrogen as a metal-free catalyst in the oxygen reduction reaction. © 2015 The Royal Society of Chemistry.

Gum metal, a class of multifunctional β titanium alloys, has attracted much attention in the past decade due to its initially-proposed dislocation-free deformation mechanism based on giant faults, i.e., macroscopic planar defects carrying significant plastic strain. Special deformation features were observed in these alloys, such as plastic flow localization, pronounced surface steps, low work hardening, and large elongation. These were all proposed to arise from the special giant fault mechanism activated in the β-Ti matrix, while the initial presence or mechanically-induced formation of other phases was debated in several follow-up studies. Here, we set off with Ti-Nb-based gum metal samples with confirmed presence of large amounts of nanometer-sized hexagonal ω particles. Deformation experiments demonstrate all the features observed in the original reports, mentioned above. However, careful characterization reveals that the deformation bands (similar to giant faults) where plastic flow localized are "dislocation channels" that are depleted of ω phase. These channels are proposed to form by a {1 1 2}<1 1 1> dislocation dissociation mechanism, promoting reverse transformation of the ω phase into the β phase. The deformation induced ω-β transformation and the associated dislocation channeling process can explain the presence of the aforementioned special deformation features in the current gum metal. © 2015 Acta Materialia Inc.

Nanoparticles are prone to clustering either via aggregation (irreversible) or agglomeration (reversible) processes. It is exceedingly difficult to distinguish the two via conventional techniques such as dynamic light scattering (DLS), nanoparticle tracking analysis (NTA), or electron microscopy imaging (scanning electron microscopy (SEM), transmission electron microscopy (TEM)) as such techniques only generally confirm the presence of large particle clusters. Herein we develop a joint approach to tackle the issue of distinguishing between nanoparticle aggregation vs agglomeration by characterizing a colloidal system of Ag NPs using DLS, NTA, SEM imaging and the electrochemical nanoimpacts technique. In contrast to the conventional techniques which all reveal the presence of large clusters of particles, electrochemical nanoimpacts provide information regarding individual nanoparticles in the solution phase and reveal the presence of small nanoparticles (<30 nm) even in high ionic strength (above 0.5 M KCl) and allow a more complete analysis. The detection of small nanoparticles in high ionic strength media evidence the clustering to be a reversible process. As a result it is concluded that agglomeration rather than irreversible aggregation takes place. This observation is of general importance for all colloids as it provides a feasible analysis technique for a wide range of systems with an ability to distinguish subtly different processes. © 2015 American Chemical Society.

Grain boundaries in materials have substantial influences on device properties, for instance on mechanical stability or electronic minority carrier lifetime in multicrystalline silicon solar cells. This applies especially to asymmetric, less ordered or faceted interface portions. Here, we present the complex atomic interface structure of an asymmetric Σ9 tilt grain boundary in silicon, observed by high resolution scanning transmission electron microscopy (HR-STEM) and explained by atomistic modeling and computer simulation. Structural optimization of interface models for the asymmetric Σ9 and related symmetrical Σ9 and Σ3 tilt grain boundaries, by means of molecular-statics simulations with empirical silicon potentials in combination with first-principles calculations, results in a faceted asymmetric interface structure, whose grain-boundary energy is so low that it is likely to exist. The simulated local atomic structures match the observed HR-STEM images very well. © 2015 American Physical Society.

Dry sliding wear of metals is strongly affected by the formation of oxide particles and their incorporation into compacted oxide layers, so-called glaze layers. A high-temperature reciprocating pin-on-disc tribometer was used to study the tribological response of a Ni-based Alloy 80A pin on a cast iron disc at ambient temperature and at 300. °C. Alloy 80A is used for valves and specific cast irons are used for valve seat-inserts in automotive diesel engines, where wear limits the service life of the valve/seat-insert tribosystems. Measurements of the friction coefficient, the total linear wear and the electrical contact resistance were used to monitor the formation of oxide layers during the experiments. Electron dispersive X-ray (EDX) element mappings from the surface regions with wear scars provide clear evidence for the formation of glaze layers and material transfer between pin and disc. Focused ion beam (FIB) micromachining was used to cut out thin lamellae from specific surface regions of glaze layers and from metallic wear particles. These lamellae were investigated in a transmission electron microscope (TEM). It was shown that the glaze layers generated at 25 and 300. °C exhibit distinct differences, which led to a reduction in wear rate by a factor of five at the higher temperature. We also report on the mechanical mixing of oxide particles and metal matrix that results in a metal/oxide nanocomposite directly below the sliding surfaces. Such composite structures were also observed inside of metallic wear debris. © 2014 Elsevier B.V.

Based on the evaluation of lattice parameter maps in aberration corrected high resolution transmission electron microscopy images, we propose a simple method that allows quantifying the composition and disorder of a semiconductor alloy at the unit cell scale with high accuracy. This is realized by considering, next to the out-of-plane, also the in-plane lattice parameter component allowing to separate the chemical composition from the strain field. Considering only the out-of-plane lattice parameter component not only yields large deviations from the true local alloy content but also carries the risk of identifying false ordering phenomena like formations of chains or platelets. Our method is demonstrated on image simulations of relaxed supercells, as well as on experimental images of an In0.20Ga0.80N quantum well. Principally, our approach is applicable to all epitaxially strained compounds in the form of quantum wells, free standing islands, quantum dots, or wires. (C) 2014 AIP Publishing LLC.

High resolution transmission electron microscopy, nano-beam electronic diffraction, energy dispersive X-rays scanning spectroscopy, vibrating sample magnetometry (VSM) and ferromagnetic resonance (FMR) techniques are used in view of comparing (static and dynamic) magnetic and structural properties of Co 2MnGe(13 nm)/Al2O3(3 nm)/Co(13 nm) tunnel magnetic junctions (TMJs), deposited on various single crystalline substrates (a-plane sapphire, MgO(100) and Si(111)). They allow for providing a correlation between these magnetic properties and the fine structure investigated at atomic scale. The Al2O3 tunnel barrier is always amorphous and contains a large concentration of Co atoms, which, however, is significantly reduced when using a sapphire substrate. The Co layer is polycrystalline and shows larger grains for films grown on a sapphire substrate. The VSM investigation reveals in-plane anisotropy only for samples grown on a sapphire substrate. The FMR spectra of the TMJs are compared to the obtained ones with a single Co and Co2MnGe films of identical thickness deposited on a sapphire substrate. As expected, two distinct modes are detected in the TMJs while only one mode is observed in each single film. For the TMJ grown on a sapphire substrate, the FMR behavior does not significantly differ from the superposition of the individual spectra of the single films, allowing for a conclusion that the exchange coupling between the two magnetic layers is too small to give rise to observable shifts. For TMJs grown on a Si or on a MgO substrate, the resonance spectra reveal one mode which is nearly identical to the obtained one in the single Co film, while the other observed resonance shows a considerably smaller intensity and cannot be described using the magnetic parameters appropriate to the single Co2MnGe film. The large Co concentration in the Al2O3 interlayer prevents for a simple interpretation of the observed spectra when using Si or MgO substrates. © 2013 Elsevier B.V.

The activation of non-basal slip systems is of high importance for the ductility in hcp Mg and its alloys. In particular, for Mg–Y alloys where a higher activation of pyramidal dislocation slip causes an increased ductility detailed characterization of the activated slip systems is essential to understand and describe plasticity in these alloys. In this study a detailed analysis of the activated dislocations and slip systems via post-mortem TEM and SEM-EBSD based slip band analysis in 3% deformed Mg–3 wt% Y is presented. The analysis reveals a substantial activity of pyramidal dislocations with different Burgers vectors. The obtained dislocation densities and active slip systems are discussed with respect to atomistic simulations of non-basal dislocations in hcp Mg. © 2013 Elsevier B.V.

Combining aberration corrected high resolution transmission electron microscopy and density functional theory calculations we propose an explanation of the antisurfactant effect of Si in GaN growth. We identify the atomic structure of a Si delta-doped layer (commonly called SiNx mask) as a SiGaN3 monolayer that resembles a √3×√3 R30 surface reconstruction containing one Si atom, one Ga atom, and a Ga vacancy (V Ga) in its unit cell. Our density functional theory calculations show that GaN growth on top of this SiGaN3 layer is inhibited by forming an energetically unfavorable electrical dipole moment that increases with layer thickness and that is caused by charge transfer between cation dangling bonds at the surface to VGa bound at subsurface sites. © 2013 American Physical Society.

We study static and dynamic magnetic properties of Co2MnGe (13 nm)/Al2O3 (3 nm)/Co (13 nm) tunnel magnetic junctions, deposited on various single crystalline substrates (a-plane sapphire, MgO(100), Si(111)). The results are compared to the magnetic properties of Co and of Co2MnGe single films lying on sapphire substrates. X-rays diffraction always shows (110) orientation of the Co2MnGe films. Structural observations obtained by high resolution transmission electron microscopy confirmed the high quality of the tunnel magnetic junction grown on sapphire. Our vibrating sample magnetometry measurements reveal in-plane anisotropy only in samples grown on a sapphire substrate. Depending on the substrate, the ferromagnetic resonance spectra of the tunnel magnetic junctions, studied by the microstrip technique, show one or two pseudo-uniform modes. In the case of MgO and of Si substrates only one mode is observed: it is described by magnetic parameters (g-factor, effective magnetization, in-plane magnetic anisotropy) derived in the frame of a simple expression of the magnetic energy density; these parameters are practically identical to those obtained for the Co single film. With a sapphire substrate two modes are present: one of them does not appreciably differ from the observed mode in the Co single film while the other one is similar to the mode appearing in the Co2MnGe single film: their magnetic parameters can thus be determined independently, using a classical model for the energy density in the absence of interlayer exchange coupling. Copyright © 2013 American Scientific Publishers.

In the present work, modulated four- and five-layered orthorhombic, seven-layered monoclinic (4O, 10M and 14M) and unmodulated double tetragonal (L10) martensites are characterized in Heusler Ni-Mn-Sn alloys using X-ray diffraction, high-resolution transmission electron microscopy, electron diffraction techniques and thermal analysis. All modulated layered martensites exhibit twins and stacking faults, while the L10 martensite shows fewer structural defects. The substitution of Sn with Mn in Ni 50Mn37+xSn13-x (x = 0, 2, 4) enhances the martensitic transition temperatures, while the transition temperatures decrease with increasing Mn content for constant Sn levels in Ni50-yMn37+ySn13 (y = 0, 2, 4). The compositional dependence of the martensitic transition temperatures is mainly attributed to the valence electron concentration (e/a) and the unit-cell volume of the high-temperature phase. With increasing transition temperatures (or e/a), the resultant martensitic crystal structure evolves in a sequence of 4O → 10M → 14M → L10 in bulk Ni-Mn-Sn alloys. © 2013 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Ordered mesoporous silicon carbide monoliths (OMSCMs) with three-dimensional (3D) bi-continuous cubic structure (Ia3d) have been successfully prepared using KIT-6 silica as the hard template and the commercial polycarbosilane (PCS-800) as the preceramic precursor. Tablet-like SiC/KIT-6 composite monoliths were formed via nanocasting of PCS-800 into the mesopores of KIT-6 silica by the wet impregnation, followed by pressing the PCS-800/KIT-6 composite powder with the addition of triblock copolymer P123 as a binder, and subsequent pyrolysis at 1073, 1273, or 1473 K in argon. The KIT-6 silica template was then dissolved in hydrogen fluoride (HF) solution to generate the silicon carbide (SiC) replicated monoliths with cubic ordered mesoporous structure. The OMSCMs demonstrated good macroscopic tablet-like appearances and no any cracks could be found in spite of the evident shrinkage. They were characterized by small-angle and wide-angle X-ray diffraction (XRD), nitrogen adsorption, Fourier-transform infrared (FT-IR), elemental analysis, transmission electron microscopy (TEM), and scanning electron microscopy (SEM). Nitrogen adsorption and small-angle XRD measurements showed that the OMSCMs had very high stability even after re-treatment at 1673 K under argon. And the transformation of amorphous into nano-crystalline state for SiC framework in the OMSCMs proceeded with the retention of the tablet-like morphology. © 2012 Elsevier Inc. All rights reserved.

We present the growth optimization and the doping by the metal organic chemical vapor deposition of lattice-matched Al 0.82In 0.18N bottom optical confinement layers for edge emitting laser diodes. Due to the increasing size and density of V-shaped defects in Al 1-xIn xN with increasing thickness, we have designed an Al 1-xIn xN/GaN multilayer structure by optimizing the growth and thickness of the GaN interlayer. The Al 1-xIn xN and GaN interlayers in the multilayer structure were both doped using the same SiH 4 flow, while the Si levels in both layers were found to be significantly different by SIMS. The optimized 8×(Al 0.82In 0.18N/GaN=54/6 nm) multilayer structures grown on free-standing GaN substrates were characterized by high resolution X-ray diffraction, atomic force microscopy and transmission electron microscopy, along with the in-situ measurements of stress evolution during growth. Finally, lasing was obtained from the UV (394 nm) to blue (436 nm) wavelengths, in electrically injected, edge-emitting, cleaved-facet laser diodes with 480 nm thick Si-doped Al 1-xIn xN/GaN multilayers as bottom waveguide claddings. © 2011 Elsevier B.V. All rights reserved.

We report about a combined structural and magnetometric characterization of self-assembled magnetic nanoparticle arrays. Monodisperse iron oxide nanoparticles with a diameter of 20nm were synthesized by thermal decomposition. The nanoparticle suspension was spin-coated on Si substrates to achieve self-organized arrays of particles and subsequently annealed at various conditions. The samples were characterized by x-ray diffraction, and bright and dark field high resolution transmission electron microscopy. The structural analysis is compared to magnetization measurements obtained by superconducting quantum interference device magnetometry. We can identify either multi-phase FexO/γ-Fe2O3 or multi-phase Fe xO/Fe3O4 nanoparticles. The Fe xO/γ-Fe2O3 system shows a pronounced exchange bias effect which explains the peculiar magnetization data found for this system. © 2011 IOP Publishing Ltd.

Epitaxial Cu(001) layers were deposited on MgO(001) substrates by magnetron sputtering and the atomic structure of the Cu-MgO interface was characterized by spherical aberration (CS)-corrected high-resolution transmission electron microscopy (HRTEM). The interface structure and the misfit dislocation network were determined by imaging in both the < 100> and < 110> directions. The dislocation network was found to lie along the < 100> directions with a Burgers vector of 1/2 aCu < 100> deduced from HRTEM images and geometrical phase analysis. The dislocations do not fully accommodate the lattice mismatch, yielding residual stress at the interface and an elongation of the Cu lattice along the [001] direction. © 2010 Elsevier B.V. All rights reserved.

The main strengthening precipitates of aluminum alloy 2198-T8, which are of the T1 phase, dissolve during friction stir welding, sending many Li atoms into solid solution. The stir zone precipitates are characterized using high-resolution transmission electron microscopy, energy dispersive spectroscopy, and selected area diffraction techniques to begin answering questions about the microstructural evolution and the relationship between microstructure and mechanical properties in friction stir welding of the next generation of lightweight Li-containing Al alloys. © 2010 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Highly ordered mesoporous carbon FDU-16 rhombic dodecahedral single crystals with body-centered cubic structure (space group Im3̄m) have been successfully synthesized by employing an organic-organic assembly of triblock copolymer Pluronic F127 (EO106PO70EO106) and phenol/formaldehyde resol in basic aqueous solution. Synthetic factors (including reaction time, temperature, and stirring rate) are explored for controlling the formation of rhombic dodecahedral single crystals. The optimal stirring rate and the reaction temperature are 300 ± 10 rpm and ∼66 °C, respectively. High-resolution scanning electron microscopy (HRSEM), scanning transmission electron microscopy (STEM), and ultramicrotomy are applied to study the fine structures of the carbon single crystals. The mesopores are arranged in body-centered cubic symmetry throughout the entire particle. Surface steps are clearly observed in the {110} surface, which suggests a layer-by-layer growth of the mesoporous carbon FDU-16 single crystals. Cryo-SEM results from the reactant solution confirm the formation of resol/F127 unit micelles, further supporting the layer-by-layer growth process. The mesoporous carbon FDU-16 single crystals grow up to the final size of 2-4 μm within 2 days. These findings may have consequences for the growth mechanism of other carbon materials in aqueous solution; moreover, the high-quality single crystals also have potential applications in nanodevice technologies. © 2010 American Chemical Society.

Multilayer thin films were grown by non-reactive sequential magnetron sputter deposition from ceramic TiN and metallic FeCo targets addressing a combination of wear resistance and sensoric functionality. Coatings with bilayer period values ranging from 449 nm down to 2.6 nm were grown with the total amount of either material maintained constant. The multilayer thin films were post-annealed ex situ at 600 °C for 60 min in vacuum. X-ray diffraction results imply the multilayer thin films undergo significant changes in their crystalline structure when the bilayer period is decreased. Using high-resolution transmission electron microscopy as well as selected-area electron diffraction it is shown that in the case of multilayer thin films with bilayer periods of several tens of nanometres and higher, FeCo layers and TiN layers in their respective common CsCl-and NaCl-type crystal structures alternate. In contrast, in the multilayer thin films with bilayer periods of only a few nanometres, grain growth across the interfaces between the individual layers takes place and a strongly textured microstructure is formed which features columns in (pseudo-)fcc crystal structure grown in heteroepitaxial growth mode. It is suggested that the experimental findings imply the latter multilayer thin films to be alternately composed of TiN layers and (Ti,Fe,Co)N solid solution layers which have been formed by a solid-state reaction during the deposition process. As a consequence, heteroepitaxially stabilized columnar grains in strongly textured (pseudo-)fcc crystal structure are formed. This crystal structure is preserved after the annealing procedure which qualifies these coatings for use in applications where temperatures of up to 600 °C are reached. © 2010 IOP Publishing Ltd.

A new ferromagnetic shape memory thin film system, Fe-Pd-Cu, was developed using ab initio calculations, combinatorial fabrication and high-throughput experimentation methods. Reversible martensitic transformations are found in extended compositional regions, which have increased fcc-fct transformation temperatures in comparison to previously published results. High resolution transmission electron microscopy verified the existence of a homogeneous ternary phase without precipitates. Curie temperature, saturation polarization and orbital magnetism are only moderately decreased by alloying with nonmagnetic Cu. Compared to the binary system; enhanced Invar-type thermal expansion anomalies in terms of an increased volume magnetostriction are predicted. Complementary experiments on splat-fabricated bulk Fe-Pd-Cu samples showed an enhanced stability of the disordered transforming Fe70Pd30 phase against decomposition. From the comparison of bulk and thin film results, it can be inferred that, for ternary systems, the Fe content, rather than the valence electron concentration, should be regarded as the decisive factor determining the fcc-fct transformation temperature. © 2010 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Oxide dispersion strengthened ferritic-martensitic steels are potential candidates for applications in future fusion power plants. High creep resistance, good oxidation resistance, reduced neutron activation and microstructural long-term stability at temperatures of about 650-700°C are required in this context. In order to evaluate its thermal stability in the ferritic phase field, samples of the reduced activation ferritic-martensitic 9%Cr-ODS-Eurofer steel were cold rolled to 50% and 80% reductions and further annealed in vacuum from 300 to 800°C for 1h. The characterization in the annealed state was performed by scanning electron microscopy in the backscattered electron mode, high-resolution electron backscatter diffraction and transmission electron microscopy. Results show that the fine dispersion of Y-based particles (about 10nm in size) is effective to prevent recrystallization. The low recrystallized volume fraction (< 0.1) is associated to the nuclei found at prior grain boundaries and around large M23C6 particles. Static recovery was found to be the predominant softening mechanism of this steel in the investigated temperature range. © 2010 Elsevier B.V.